00:00 Intro 01:17 Devices Used 02:58 1st Litebeam M5 Configuration (Site A) 07:47 2nd LitebeamM5 Configuration (Site B) 11:40 Site A LitebeamM5 Installation 12:01 Site B LitebeamM5 Installation 12:56 Test Results 14:07 Connect Site B to an Access Point to Share Internet
You probably dont give a shit but does anyone know of a trick to get back into an Instagram account?? I stupidly lost my password. I would love any tricks you can offer me!
i know this is two years ago but trust me it really new to somebody like me. when i completed college, my first job is a wireless engineer even though i have not much knowledge in this field i had to accept because for me a new challenge is always welcome but sometimes it is very hard to navigate your way through expecially with no one to guide you. Thanks for this video
Very impressive tutorial, I really appreciate how you didn't mess around with details we didn't need, you explained exactly how to setup the two attenas perfectly. I followed your tutorial and got my system working. Good Job
I tried watching several videos on configuring the Ubiquiti M5 and was left scratching my head until I went through your video. Your video was straight and to the point, VERY understandable, and I had everything configured with absolutely NO PROBLEM. Thank you!!!
Great tutorial, You didn't waste time with useless information and went directly to what had to be changed. When needed you explained why something had to be changed. Very good job ! Thank you !!
Torogi Pro your the best explainer i have come across the entire youtube eco system of ISP / WISP tutorials . You have shown me something that has been consuming my time for years just literally in 14 mins oooh thank you so much . Count me in .... liked the video and subscribed going to share as well thank you once more
I used a similar 2 CPE - TP-LINK 710. 5ghz wifi. Looks physically similar to Ubiquiti. Installed it about 6 miles apart clear LOS from my home (AP mode, internet source and local home network) in Fremont, Ca. to my mobile location (client mode) in Fremont Park for internet access and VPN to work (telecommuting). Works great, high speed internet! Used silva explorer compass, google maps and binoculars for rough aiming of point A to point B. (Landmark) Then fine alignment position by turning one (CPE B because I am now in the park) either sideway direction for maximum signal strength using TP-Link monitor software.
Thanks BRO!!!! This is great!!!! I just hired Starlink out our farm, and I needed internet at other location, it is working!!!!! I need an access point now...
I'm a newbie about setting up internet connectivity wirelessly, and although most of the folks here are now using telco fibr connection, but I'm pretty sure that this is the best configuration that I will be using if I'm going to have the necessary hardware. Thank you, Sir.
This is a really good guide on how to use this cheap technology to provide wireless infrastructure in developing countries like yours. $65 is so cheap for wireless throughput.
umasa ako na 10km talaga 1.1km lang naka indicate sa MAIN . but overall well explained ang video super super easy tutorial para sa mga gusto sumubok mag p2p at ptmp using ubiquiti devices
@@xlgoldfish Yes. I have starlink and deco Wi-Fi mesh units. I have the wireless bridge plugged into one of my deco units on both ends of the bridge. Works great.
thank U bro i really need this desperately i was paying 2 internet bills for around 8-9 months and it was really like a burden for me...One for my home and one for my office which was around 2-3 km away and it was in field of view and really your video helped me Thank u .. 😃😃♥
Nice Video Torogi, thanks for nice demo and detailed description. Just curiosity will I be able to intall it in India dist is 15-20 km? between City and rural area where no service provider willing to come and serve.
Nice tutorial bro. Just want to ask how tall should the site A and B litebeam install? Is there a minimum and maximum altitude for each device? If so, what tool should be use to make it stand outdoor? Thanks bro?
Was wondering the same question, in my case our surroundings is covered with large trees. Should I lift it up higher than those trees? Maybe it kinda looks like a mini tower🤔
GREAT VIDEO!!! new subscriber from now. I have a question, (also if i may have already my answer), could be possible to connect two points at 35 km air distance, theyre two far towns i've homes. this two towns obiuvsly don't see each others at view, second one is a bit taller and first one on sea level. To say theyre located different and not in front of each other.
00:00 Intro
01:17 Devices Used
02:58 1st Litebeam M5 Configuration (Site A)
07:47 2nd LitebeamM5 Configuration (Site B)
11:40 Site A LitebeamM5 Installation
12:01 Site B LitebeamM5 Installation
12:56 Test Results
14:07 Connect Site B to an Access Point to Share Internet
where can i buy these equipment
@@ReligiousReasoning its in online like lazada or shopee
great explanation...nairobi kenya
You probably dont give a shit but does anyone know of a trick to get back into an Instagram account??
I stupidly lost my password. I would love any tricks you can offer me!
@Lance Fabian Instablaster :)
i know this is two years ago but trust me it really new to somebody like me. when i completed college, my first job is a wireless engineer even though i have not much knowledge in this field i had to accept because for me a new challenge is always welcome but sometimes it is very hard to navigate your way through expecially with no one to guide you. Thanks for this video
My question is do you see this and by this i mean m5 or ac gen 2 on your controller if you have one in your network?
Very impressive tutorial, I really appreciate how you didn't mess around with details we didn't need, you explained exactly how to setup the two attenas perfectly. I followed your tutorial and got my system working. Good Job
I tried watching several videos on configuring the Ubiquiti M5 and was left scratching my head until I went through your video. Your video was straight and to the point, VERY understandable, and I had everything configured with absolutely NO PROBLEM. Thank you!!!
Great tutorial, You didn't waste time with useless information and went directly to what had to be changed. When needed you explained why something had to be changed. Very good job ! Thank you !!
Torogi Pro your the best explainer i have come across the entire youtube eco system of ISP / WISP tutorials . You have shown me something that has been consuming my time for years just literally in 14 mins oooh thank you so much . Count me in .... liked the video and subscribed going to share as well thank you once more
That was one thing i have been trying to learn and you have made me understand with less than 20min. Thank you so much.
I used a similar 2 CPE - TP-LINK 710. 5ghz wifi. Looks physically similar to Ubiquiti. Installed it about 6 miles apart clear LOS from my home (AP mode, internet source and local home network) in Fremont, Ca. to my mobile location (client mode) in Fremont Park for internet access and VPN to work (telecommuting). Works great, high speed internet! Used silva explorer compass, google maps and binoculars for rough aiming of point A to point B. (Landmark) Then fine alignment position by turning one (CPE B because I am now in the park) either sideway direction for maximum signal strength using TP-Link monitor software.
how much speed did you get?
Thanks BRO!!!! This is great!!!! I just hired Starlink out our farm, and I needed internet at other location, it is working!!!!! I need an access point now...
Thanks for this tutorial, i was able to use my stock litebeam m5 and make it work to connect in my tenda router with 5ghz wifi..it works👍
Very good job Sir. Direct to the point no fillers perfect. TY
This very very express. Thanks for taking out your time to teach us this configuration
Nice work. Love those Ubiquiti M5. Did a lot of work with those back in the ISP working days.
I'm a newbie about setting up internet connectivity wirelessly, and although most of the folks here are now using telco fibr connection, but I'm pretty sure that this is the best configuration that I will be using if I'm going to have the necessary hardware. Thank you, Sir.
Thank you for the comprehensive tutorial!
Excelent explanation. You help me so much! thanks ! Congratulations!!
This is a really good guide on how to use this cheap technology to provide wireless infrastructure in developing countries like yours. $65 is so cheap for wireless throughput.
That was a pretty eye ball alignment.
omg my ears in the first 10 seconds with that marker
igorot ka bos nice video nalaeng
Thanks a lot . 😍 Trust me this video is very very good.
Thank you so much Sir you have helped me a lot.
Well explained ,Good job . just found the solution on Litebeam M5 connection
umasa ako na 10km talaga 1.1km lang naka indicate sa MAIN
.
but overall well explained ang video super super easy tutorial para sa mga gusto sumubok mag p2p at ptmp using ubiquiti devices
Hehe
Excelent explanation, congratulation. You help me so much. Thanks!!!
your ideas are like mindblowing but still the curiosity hunts me everytime and says how did he get that?
seriously.....
Great Job Buddy....... so great
Excellent tutorial. My system is up and working thanks to you.
Can one do this with starlink?
@@xlgoldfish Yes. I have starlink and deco Wi-Fi mesh units. I have the wireless bridge plugged into one of my deco units on both ends of the bridge. Works great.
@Chev2rcr can you give us a tutorial please
Excelent explanation, congratulation. You help me so much. Thanks!!!😀
Great job man, your channel the best. easy to learn
thank you very much for sharing your expertiese with us
very nice explanation sir , thank you for sharing your experience
Big help bro. Thanks for sharing ur knowledge 👍
You are brilliant best video on this set up
Hope to see a mikrotik version of this kuya. super useful. 👍
Thank you sir I will follow this steps sir thank you
So galing!
Wow .... that is some nice range sir.
nayswan sir.nyo knowledge nnman.tnx po
Great video, no speed test 🤷🏼♂️
12:18 antenna is too close to the wall, research about fresnel zone to calculate the distance correctly. 😁
thank U bro i really need this desperately i was paying 2 internet bills for around 8-9 months and it was really like a burden for me...One for my home and one for my office which was around 2-3 km away and it was in field of view and really your video helped me Thank u .. 😃😃♥
Nicely explained. Well done
Nice one.. I'm trying to start a community wifi connection in an township for about 800 users..thinking 4 of this Litebeams can actually do well..
Thanks a bunch this was a wonderful video
Excellent man
makikita ko din ba yung mga devices na naka connect such as ip cams sa site a and site b (vice versa)? or only internet connection lang malaga..
its posible Litebeam M5 in SITE B to transmit wi-fi to another point (200-300m)
This is very very informative. Is it possible to extend to a site C?
Cooooooool. Perfect👌😍👍🏽🎉
Thanks po sir. Great tutorial, tips and advices. Try ko po samin. Nasa ilang km po from home and apartment nyo po? Thanks
SALUDOS DESDE COLOMBIA 🇨🇴🇨🇴🇨🇴
Thank teacher
Great detailed video… smooooth ✌🏽
Perfect video
soo nice i love it
very good visual aid.thumbs up👍
How do you recommend doing this without anything other than the password at your home location?
are there no settings for the frequency used for these antennas?
Can you use 3 to jump across 3 buildings??
Informative video. What are the items needed to purchase to have the same setup? Thanks!
Hey, I have a Mac and tried to add an IP after connecting the Ethernet and no luck on connecting. Help!
nice tutorial, sana po gumawa ka nag video sa tamang alignment ng antenna sa site A and Site B.
Nice tutorial mate. Really helped me.
wow amazing..I can possibly get signal on SM mall here in province..
Can we used this device only one? Just only send your wifi for long range
Nice Video Torogi, thanks for nice demo and detailed description. Just curiosity will I be able to intall it in India dist is 15-20 km? between City and rural area where no service provider willing to come and serve.
No f u cking way , he lied about the distention , it says dis is 0.2 Km , cant you see the end of the video ?
Nice tutorial •♡•
Damn your voice is such an eargasm 😅
Great Setup
Very professional
Thank you!
Is it applicable with the wifi voucher every site b,c,d boss? Can we get the maximum isp speed with the m5 unit?
Very good
how can we provide WiFI internet services to indoors as well outdoors for long range usage approximately 1 km with high speed internet services ?
How to do it with POE device to communicate via the electric utility cable network?
Nice tutorial bro. Just want to ask how tall should the site A and B litebeam install? Is there a minimum and maximum altitude for each device? If so, what tool should be use to make it stand outdoor? Thanks bro?
Was wondering the same question, in my case our surroundings is covered with large trees. Should I lift it up higher than those trees? Maybe it kinda looks like a mini tower🤔
Depends with the kline of sight
Having the same thoughts here. My location is in a Village/Subdivision and my Site B is in DownTown, but its just 3-4KM Only.
Suggest boss next video what it needs to operate like this. Specially Legit papers to became provider
You don’t set any TXpower and TXfrequency and RX frequency and channel bandwidth and all these details ? The device is configure itself or what ?
so clearly, i like it...want to buys
Well explained ! i have a question the antenna can not share wifi and receive signal at the same time?
Yes amigo,
thank you. how is its performance? Are there any disconnections on the internet? are you satisfied?
Does this mean if I have the litebeam and router I can get internet Or you have a mast or network provider you are getting the internet from?
Can i use 1 devuce only.. for access point only.. not point to point
Is compatible with all access point /router? Or need a specific device?
Nice video helps alot
tnx sir..
Brilliant
yung router po ba is AP mode then pwedeng i connect sa desktop?
Helful Video
GREAT VIDEO!!! new subscriber from now. I have a question, (also if i may have already my answer), could be possible to connect two points at 35 km air distance, theyre two far towns i've homes. this two towns obiuvsly don't see each others at view, second one is a bit taller and first one on sea level. To say theyre located different and not in front of each other.
Do you provide tech support. I'm trying to set these up as point to point to point. Can't get last leg to work.
Do you require 2? Is it possible to use 1 to extend the wifi signal?
How about for personal use sir? My antenna cannot directly hit sa tower because of trees and up hill
Can you make this antena a hotspot where you can connect with your phone or laptop?
Nice video!
Bro where can i buy those devices? How much? Any recommendation?
Can you add another 3rd LiteBean M5 as client station?
How do you connect the site B? I am confused.
Thank you 🙏🏼