I enjoyed your video! I have the same problem however mine keeps blowing fuses. I disconnected Lo and Lo2 to see if it blew a fuse. It did no matter which Black wire I disconnected. Suggestions? Thank you
Hi, I have the same issue with my fridge but the fuse is not blown. Do you have any suggestions? as well my screen flashes 88 and will not switch to ac. It does light on propane though.
@@Rvdiagnostics Hi, its a 1200lrim. i do have a voltmeter. both ac plugs have power at them when im plugged in.one thing that the when i try to select modes it doesnt want to switch over from lp to ac. and it reads 88 most the time. i looked at all 3 circuit boards and they all look good.
I have checked everything on my Norcold 1200 until the AC fuse which is good and showing power out of 117 Volts after the fuse. I am still getting the AC NO code. Tried resetting the board by grounding the 15 slot on connector. Still not working. Do you have a next step with NO AC? I checked the heating elements and they are reading 56.7 58.7 ohms. Checked DC fuse it is good. Where do I go from here? Thanks,
@@Rvdiagnostics yes it is. One element reads 56.7 snd the other 58.7. The lp will light but shuts off after a minute or so, thanks for getting back with me.
@@Rvdiagnostics I will do that in the am. When you say “tighten” aft talking about gas fittings or wire connections? Or both? How do you tighten wire connections?
THIS IS A GREAT VIDEO AND IS THE EXACT PROBLEM IM HAVING WITH THIS EXACT SAME UNIT....
Becarfull sime of those heating elements rust in place. Use KROIL ,let soak ,then clean with rubbing alcohol. Blow dry.
Learning little bit more today!
Thank You
What you learn
Great video solved my problem😊😊
I'm glad to here that
Try this from me www.rvdiagnostics.com
The spec for each heating element is 225 watts and should be changed in pairs .
Does replacing the fuse require soldering? or is it held in by spring etc?
The 120 volt is a spring clip type
I enjoyed your video! I have the same problem however mine keeps blowing fuses. I disconnected Lo and Lo2 to see if it blew a fuse. It did no matter which Black wire I disconnected. Suggestions? Thank you
What fuse 12 volt or 120 volt side ,
Did you join rvdiagnostics&troubleshooting Facebook page
facebook.com/groups/1974314296166277/?ref=share
Same model. Won’t turn on checked all fuses. All good. Still no power. Am I missing something?
Did you measure 120 vac and 12 volt dc with a multimeter
Hi, I have the same issue with my fridge but the fuse is not blown. Do you have any suggestions? as well my screen flashes 88 and will not switch to ac. It does light on propane though.
What make. Model of fridge? Do u have a multimeter and a ac clamp on amp meter
@@Rvdiagnostics Hi, its a 1200lrim. i do have a voltmeter. both ac plugs have power at them when im plugged in.one thing that the when i try to select modes it doesnt want to switch over from lp to ac. and it reads 88 most the time. i looked at all 3 circuit boards and they all look good.
my first thought was the control board on the front was no good. I selected 6 and erased the error as well.
Did you do reset
Hi, thanks for your help. I reset the board and it seems to be working now.
I have checked everything on my Norcold 1200 until the AC fuse which is good and showing power out of 117 Volts after the fuse. I am still getting the AC NO code. Tried resetting the board by grounding the 15 slot on connector. Still not working. Do you have a next step with NO AC? I checked the heating elements and they are reading 56.7 58.7 ohms. Checked DC fuse it is good. Where do I go from here? Thanks,
Does it operate on propane?
You are dual element?
@@Rvdiagnostics yes it is. One element reads 56.7 snd the other 58.7. The lp will light but shuts off after a minute or so, thanks for getting back with me.
Ok clean all connections and tightened, See what happens Basics 1st
@@Rvdiagnostics I will do that in the am. When you say “tighten” aft talking about gas fittings or wire connections? Or both? How do you tighten wire connections?