This teardown required some top notch skill! Congrats! Was really surprised when you casually removed the screen without damaging it! And even put everything back together! Nice video!
This phone is surprisingly easy to open and swap main boards in case the screen creases and cracks, which is quite common. Just did one for a customer in about half an hour. They provided as second identical good screen phone to swap the main board into along with all their info. Trying to transfer the info via cable is not possible since you must authorize the ADB device which is not possible with a broken screen. Besides, they had a bunch of app logins/passwords they never wrote down, so swapping the main board basically kept everything exactly as in the broken screen phone. :)
It really does, just the fact that that is in it makes me want one. Though I don't think I can deal with the crease, meh camera compared to others and only 8gb of ram vs 12gb from almost every one else in that price range.
@@Cavemanheartrock The cameras are actually pretty good in real world use to be honest. My issue is the lack of expandable storage so now I gotta use a thumb drive 😂
Everybody focusses on the Fold3, but nobody really cares to take a deeper look into the Flip3 - except you!! Thanks for this really interesting video, now I know what my new phone looks on the inside! The most surprising part was the battery. I didn't know the 3300 mAh were split into 2 seperate batteries, very interesting!
Hola , mi Zflip 3 5G le cayó pimienta, lo lave sumergiéndose por un minuto y ya no quiero encender, si le conectas el cargador solo sale el símbolo de carga sin los números indicando que se encuentra cargando, me podrías ayudar por favor , saludos
Hi, you would probably have to take it apart, and dry out any liquid or moisture inside. Then use a brush like a tooth brush to brush off any corrosion on the chips or connectors and put it back together to see if you can get it to work.
Thanks! This is a masterful video. I enjoy how you completely lay out the disassembly and reassemble everything in a neat orderly style. I use to repair tape recorders, laptops, desktops, monitors. Some of them real monsters. Sometimes repairing them requires a continuity test to locate and unsolder chips. What a hideous and often thankless job that was. You got style. Very orderly and efficient teardown and reassembly. Commend yourself.😄
Wonderful video sir i thank you, looking into purchasing one as a tech repair person always helps knowing what im into if i break it bc i will be fixing myself and likely for customers. Samsung as always does a great job making things simple and that make sense for disassembly even in a complex device.
Such a nice and clean way of opening and closing it back … fresh breeze of air in the atmosphere where people are just scratching dropping and breaking phones
Amazing! I love the style of your videos, informative yet succinct. My Galaxy Flip says "battery temp too low to charge", how would one fix this? Thank you.
Thanks! Most likely the temp reader on the sub board/charger port board is faulty. That sub board would need to be replaced. If your phone is still in warranty, best bet is to send it to samsung to have them fix it. If not, then you can watch the video and replace that sub board/charger port board if a replacement is available. Also you can try charging it while the phone is off, sometimes that bypasses the issue.
Thank you . Really needed some info in my replacement phone. Now because of your video, I now have the info from i needed from my old phone in my new one :).
Question: supposedly there are small bristles at hinge to protect against dust/debris getting inside. Did you notice them? Spigen sells a hinge protector film but I don't know if OK to install or if it will mess with these bristles?
Here is a link to more detailed pics : www.theverge.com/22619139/samsung-galaxy-z-fold-3-flip-screen-durability-waterproof-aluminum . Also not sure about adding the protector film but I wouldn't install anything that is not from samsung made specifically for this phone. Its been known that 3rd party stuff damage the screens and parts on these phones so I would not risk it.
Not sure I will get an answer butnwhere is the open/close sensor? Im guessing its a combo of magnets that pull up and down a metal contact. My flip screen has trouble turning on. Takes several button pushes and accidently dialed SOS. Wondering if a magnet issue causing the problem.
I would have liked to see a few flips opening and closing once it was back together, just to see how it holds up after a repair. Great video nonetheless!
Thanks! Ya should have opened and closed a few times. But I can tell you if the fold screen is not adhered back to the frame, it can crack or get damaged if you close it and it folds incorrectly. So always best to either get a flip assembly with the screen pre attached for replacement or make sure to use the original pre cut adhesives which eventually will become available to attach a replacement to the frame to ensure a correct installation. :)
Good evening, I came across your video because my phone power off every time I close the phone (except when plugged to charger) . Tried a couple things and I think it's the flex cable that needs to be replaced. Do you have a video or can you guide me how easy is it to replace it? A new screen cost $$$ and the flex cable is only a few dollars.
Hi, awesome video, do you think the factory thermal paste is good? or maybe an mx-4 8,5W/(mK) would help it dissipate heat more effectively, maybe the phone feels more hot in the hand but processor could be more cool, what do you think? some good thermal pad between ram and 3d graphite could do something?
For the most part its good. If you do plan on replacing the thermal paste or adding thermal pads etc, just make sure the thermal paste is not a highly conductive one, since if it leaks around, it can short the phone or components. Better thermal paste will help with heat transfer but the difference wont be all that much to notice. So not worth taking it apart to replace unless you need to make a repair on something and are going to take it apart already.
Hi sir, I recently dropped my phone and scratched that plastic border you took off before taking the screen off. Is there anyway that I can contact you to do the same repair to my phone. The screen is in perfect shape just the border needs replacing.
I have a Flip 3 with a broken screen. The cost of a replacement screen in the UK does not make it worth repairing. I have tried every option to access the phone to offload the photos etc without success as the phone is not in debug mode. Does anyone know of a way to connect a cheap mobile screen to the device so I can unlock it and offload the data then I can reset it to factory defaults and sell it as parts. I would have thought that Samsung would use the same connector and pin out on different mobiles. I imagine this would be useful to a lot of users with flips.
Hi. I have this phone and my screen froze. I never backed up my photos. I was told it's a motherboard issue. Do you know if a motherboard can be repaired so I can transfer my photos? Ty
Hi here is a link: www.ebay.com/itm/165919552574?hash=item26a193743e:g:O98AAOSwNlRj3BRY&amdata=enc%3AAQAIAAAA4O%2FX5uI5nvuqOcp2LO545wZrB47BY5IPoKVR6XzhMUG192iolTVlF4jCGWzXMnOakkyXjB97KfN4wKoC%2BfNSvSNH2luMFdKQj5DR4RcCoM2VqHGCugOPSTQBrcsUV9HpA7mYKyY%2BZApsvRBXMinzI%2FkPSWoS5eVxiu8vr8P7KlH2u2BaQkavlox4WjOVaZjegLMPtjpocLVLI8NQaVNq%2FQ7HYN6dZhlSOLeXtgqNyHyAJiu5RXQI%2FAJUodI5CALKyXFce3e8KrwGyD7fbXJ5t%2Bw2eASkWpXTyiP38m0TVMOy%7Ctkp%3ABFBMgsPKxvNi
Excelent video. What about the water resistance after it is re assembled is it compromised? Mine Z FLIP 3 got screen issues ( dead pixels on the hinge that stays always on) with 6 months of very careful use. It seems to be the TBF (time between failures ) on this new tech model. I would not recommend it... They fixed it (because it was still in warranty) but it seems will happen again in another 6 months and them with no warranty
Does isopropyl alcohol dissolve the waterproofing seals? Also, my Z Flip 3 temp sensor might not be working properly. When the phone is closed, it charges as normal but when I open the phone, it stops charging. I used a diagnostics app, and it says the battery temp is as low as 7 degrees Fahrenheit open. When I check the temp after having it closed, it's back in the normal range closer to 100 degrees, before jumping back down again because the phone isn't closed. I tried to raise the temp by running a game that makes the phone relatively hot, and the temp only got up to about 50 degrees and still wouldn't charge. It's never been opened before, and it hasn't sustained any major shocks. If you have any idea as to what the issue could be or any suggestions I could try, I'd be more grateful than you know.
Usually this is related to a bad wireless charger or sometimes charger port or battery. Also yes isopropyl alcohol will eat away a bit at the adhesive. It will still be sticky after the adhesive dissolves but wont hold as well as new adhesive.
Thanks. Hmm might be something to do with the flex cable which runs from one side of the flip to the other. Either the center might be damaged which would be a difficult part to replace since it's held in place with cure in place gaskets, or one of the connectors on either end of it may have gotten loose which would require to just re connect it.
Great video this gave me a little bit of hope... I just had my flip 3 serviced because it keeps boot looping meaning it doesn't go pass the Samsung logo when powered on then it keeps restarting itself. :(( would u know the problem? They just told me they need to replace the board, but not sure what has cause it.
hey! @PBKreviews I think I found a glue that works for electronics, but i was just wondering, would using literal super glue be a bad idea? and if so, why?
yeah you would need replacement adhesive for it. Here is a link for one: www.ebay.com/itm/165919552574?hash=item26a193743e:g:O98AAOSwNlRj3BRY&amdata=enc%3AAQAIAAAA4O%2FX5uI5nvuqOcp2LO545wZx%2FluNsYtEPY0J5aeGqxqwBSNm0FLNw712dUufnMgnYcUMLQkYrzIO7gyuqaX1Av%2BB3sZ59esUWWRht8wXFsY8M6EWTmaehwCojKCY%2BGdG4GUoHiyinZrX1K4wQXdH%2BI1Lpbn6V9BU%2BPT6D0sLvJidyy3Bg19FVYCurJZeHjDyYW5cD86UQusP039BRU3%2BYIDCRqzTbteuY41u5pw4xhM1ohRXqfoifLOJ0Wh68vtwvM60J3L%2Bgss%2BBs1Ijwg5MtgGPYQNGr13ncF6eAHnlF2r%7Ctkp%3ABFBM2LmK_5Fi
oh wow, what an in-depth video. so amazing... I'm seeing you replying to newer comments, so i hope you😅 can help with mine? do you suppose the screen flex connector is replacable? cause I'm typing in a flip 3 that's currently not dead but dying 😢 it's not the screen since it works well when opened partway, however it may be the connector that's been comprised. it just seizes working completely upon opening fully, so I'm guessing it truly is that one small part... however, i only see the main motherboard to screen cable floating around in parts shops, so i'm starting to worry my phone's done for...
I'm not sure exactly what could be the issue, might be the flex cable which is between flips which went bad, which is replaceable ( www.mobilesentrix.com/mainboard-flex-cable-for-samsung-galaxy-z-flip-3-5g-f711 ) but if its the actual flex cable for the screen, you would probably need a new display.
You would need to apply new adhesive when re applying it back to have a proper hold/seal. You can watch this video on adhesive installation: ruclips.net/video/T4iiPUIM7-Y/видео.html
For the front camera glass lens. Do you have to take the front case off before heating them up and replacing them? Or can you do it while the front face is still attached?
Hi thanks! You can see somewhat more in detail on this website www.theverge.com/22619139/samsung-galaxy-z-fold-3-flip-screen-durability-waterproof-aluminum
how do you remove the Volume button?? Just saying to remove the adhesive doesn't really help. Everything else was helpful but I need to replace the Volume Button and I don't want to make anything worst.
You just need to gently peel off the flex cable portion from the frame itself so it doesn't tear, then you pull out the assembly from the two metal brackets on either side of the assembly which is in the slot of the frame. You can use a small flat head or another tool to pull the metal bracket out which is holding the volume button assembly in the slot.
yeah its annoying. You can use B-7000 glue (and use light clamps to keep it down until it dries) but have to be careful and apply very little and thin so it doesn't leak out too much. You can rub off excess if it leaks out after it has dried.
I buy all the phones for disassembly. :) I don't think any company would give out phones to be taken apart since they don't really want their design and internals to be shown to other companies too close to release or other reasons but for reviewing phones and talking about them without taking them apart is another story but ya those I am not given either at this moment in time and need to buy on my own.
Usually replacement battery door/covers or back plates etc come with the original pre cut adhesive installed. If not, here is a link to one of the original pre cut adhesives that is for the phone: www.ebay.com/itm/403560387272?hash=item5df612d2c8:g:cAsAAOSwT3ZiOvO9
Can you or someone please tell me what kind of glue I can use to fix the front screen panel. Mine is coming undone and I can lift almost the entire panel up off the phone and before it's all the way off I'd like to clean it up and glue it back on so I don't get water or any more dirt/debris in there! I'm curious if a tiny amount of epoxy red or blue would work. If not what glue/adhesive do I need!? I've read online that T-7000 glue is what's used but I can't get it unless I order it. Just want to be sure first before buying or trying anything this close to the circuit boards and screen
I still have nightmare when disassembly my SE Xperia Play back then, when I repair the flex cable. I don't think I'm ready repair this piece of expensive hardware by myself if it's break.
you need the original pre cut adhesive strips like this: www.ebay.com/itm/165919552574?hash=item26a193743e:g:O98AAOSwNlRj3BRY&amdata=enc%3AAQAIAAAA4O%2FX5uI5nvuqOcp2LO545waI01pd7u7CyR%2B%2FQ1egRN3poLcYUw4cfcsC2vutcgbAxK87OhGabI1tiUWkc%2BIkN%2B5E0gJLpiu%2FfmON2yDJ1PEnWsZyiHaDtE778IQtIlqxBGrbrNsHO6R4zcLQqUCmIYklHLUMXZllCX3dou5%2FBbIsaJ1XzPSIivYwDOtw%2FfT%2BJhyhIIfywTQ86AJiO1s%2Fv2fnsnEAUY8HwvKlOIbNkGhhf87ghCfZUG2ffBcz8BQ8Si3YnSaMxSAxZxVJ6AyfXYT6y4M6riD1VeQfeapR5zgr%7Ctkp%3ABFBMnvGWsP1h
Can the zflip3 front screen be replaced without needing a factory reset wiping all data? My wife screen suddenly went black and will not power on. Phone rear screen works so seems phone boots
So 12,69Wh of total battery capacity. Thats only about 20% less than the S21 15,5 Wh, 4000mah battery has to offer. Thx to the secondary screen which gets about 15-20% of total screen on time in my usecase, I get easy through the day. Battery life is about the same than on my 4000mah 6,5" SD855 smartphone i used before.
If you use new original pre cut adhesive that is made for the phone when re assembling, then it would retain the water resistance. But as of now it is not available yet :)
I have Flex mode Sensor fault. Phone will power off when i closed flip. Phone will stay ON if connected to charging. Battery and LCD test OK. Can you advise what could be issue and how to fixed? Thanks
Not sure exactly, but can be a bad flex cable connecting the bottom half to the top half, can be loose cable connection, causing the cable to disconnect when flip is being closed from either the battery or the flex cable connecting the top to the bottom. It can also be a short somewhere, so not sure exactly.
The amazing thing is not teardown itself.... is reassembling the phone into a working state... that's the amazing thing...
😀👌
Definitely, I can do a tear down using just a screw driver but sure as hell it's not gonna be working again.
@@KYspeaksfood I do the same. I get it into a half working state if I’m lucky
🤦♂️
Nice video...
This teardown required some top notch skill! Congrats! Was really surprised when you casually removed the screen without damaging it! And even put everything back together! Nice video!
Thanks! I appreciate it. 👍
The engineering in this is just so incredible, love your channel.
Thank you!
This phone is surprisingly easy to open and swap main boards in case the screen creases and cracks, which is quite common. Just did one for a customer in about half an hour. They provided as second identical good screen phone to swap the main board into along with all their info. Trying to transfer the info via cable is not possible since you must authorize the ADB device which is not possible with a broken screen. Besides, they had a bunch of app logins/passwords they never wrote down, so swapping the main board basically kept everything exactly as in the broken screen phone. :)
Thank you so much for this video ! You're the first one to make a teardown video for this device
Thank you and you're welcome! :)
Most underrated channel ... awesome work man
In teardown no one removes screen u does..
Keep it up
Thanks! 👍😀
8:06 omg that hinge is incredible looks amazingly well designed!
👍
It really does, just the fact that that is in it makes me want one. Though I don't think I can deal with the crease, meh camera compared to others and only 8gb of ram vs 12gb from almost every one else in that price range.
@@Cavemanheartrock The cameras are actually pretty good in real world use to be honest. My issue is the lack of expandable storage so now I gotta use a thumb drive 😂
@@skylerbond56 I too wished it had card slot to store movies, videos, pictures
@@mikem2055 Yeah sucks glad I have my g8 still for movies
Everyone: let's explore the z flip 3! Meanwhile PBKreview: let's explore the z flip 3.
😀👌
What's the difference?
@@eshwarray3993 the tone
He is raising funds to buy fold 3 by uploading flip 3 teardown video.
Alright people lets get this channel a million subs, Great work as always👍🏻
Thanks!
Really surprised that you didn't wreck the flexible display after taking it down!
That's the most fragile component.
Great job there!
Thanks. Took my time with it and applied heat and a little isopropyl alcohol n luckily didn't break it 😀👍
@@PBKreviews didnt break it but does they marks along the bottom side affect it much?
The best part is : Phone is Alive 👏🏻
👍
Everybody focusses on the Fold3, but nobody really cares to take a deeper look into the Flip3 - except you!! Thanks for this really interesting video, now I know what my new phone looks on the inside! The most surprising part was the battery. I didn't know the 3300 mAh were split into 2 seperate batteries, very interesting!
You're welcome and thank you, glad you enjoyed it :)
I don't even have mine yet and you already have a video taking it apart. Awesome video..Definitely come in handy!!! 👍🏽
Thanks! 😀
Hola , mi Zflip 3 5G le cayó pimienta, lo lave sumergiéndose por un minuto y ya no quiero encender, si le conectas el cargador solo sale el símbolo de carga sin los números indicando que se encuentra cargando, me podrías ayudar por favor , saludos
Hi, you would probably have to take it apart, and dry out any liquid or moisture inside. Then use a brush like a tooth brush to brush off any corrosion on the chips or connectors and put it back together to see if you can get it to work.
Wow awesome video...Esp the inside view of the hinge! Looks like the hinge alone needs its own teardown - amazing.
Thanks!
You not only dismantled it but turned it again into a working phone 👍👍
👍😀
Thanks! This is a masterful video. I enjoy how you completely lay out the disassembly and reassemble everything in a neat orderly style. I use to repair tape recorders, laptops, desktops, monitors. Some of them real monsters. Sometimes repairing them requires a continuity test to locate and unsolder chips. What a hideous and often thankless job that was. You got style. Very orderly and efficient teardown and reassembly. Commend yourself.😄
thanks!
It's amazing that the flip survived
Ya 😀👍
Wonderful video sir i thank you, looking into purchasing one as a tech repair person always helps knowing what im into if i break it bc i will be fixing myself and likely for customers. Samsung as always does a great job making things simple and that make sense for disassembly even in a complex device.
Thank you and you're welcome
This is impressive. It works after the tear down.
👍😀
Such a nice and clean way of opening and closing it back … fresh breeze of air in the atmosphere where people are just scratching dropping and breaking phones
Thanks! 😀👍
And yet another great tear down video by the man with the surgeon hands! Very informative video sir!
Thanks! :)
Hey i love this channels more than jerry's doing, you can assembly it into normal condition, good job bruh
Thanks! 😀
Makes it look super easy. Barely an inconvenience.....
Repairability Score: 4/10
lol may look easy but definitely time consuming and not the easiest disassembly. 👍
Jerry rig can't even remove these screens without totally destroying then. Seriously well done 👍👌
Thanks!
Nice job!
Does anybody know where to buy a new display for this flip?
Amazing! I love the style of your videos, informative yet succinct. My Galaxy Flip says "battery temp too low to charge", how would one fix this? Thank you.
Thanks! Most likely the temp reader on the sub board/charger port board is faulty. That sub board would need to be replaced. If your phone is still in warranty, best bet is to send it to samsung to have them fix it. If not, then you can watch the video and replace that sub board/charger port board if a replacement is available. Also you can try charging it while the phone is off, sometimes that bypasses the issue.
Thank you . Really needed some info in my replacement phone. Now because of your video, I now have the info from i needed from my old phone in my new one :).
You are welcome!
Question: supposedly there are small bristles at hinge to protect against dust/debris getting inside. Did you notice them? Spigen sells a hinge protector film but I don't know if OK to install or if it will mess with these bristles?
Here is a link to more detailed pics : www.theverge.com/22619139/samsung-galaxy-z-fold-3-flip-screen-durability-waterproof-aluminum . Also not sure about adding the protector film but I wouldn't install anything that is not from samsung made specifically for this phone. Its been known that 3rd party stuff damage the screens and parts on these phones so I would not risk it.
@@PBKreviews thank you!
This channel is a win for right to repair!
👍👌
Not sure I will get an answer butnwhere is the open/close sensor? Im guessing its a combo of magnets that pull up and down a metal contact. My flip screen has trouble turning on. Takes several button pushes and accidently dialed SOS. Wondering if a magnet issue causing the problem.
Great video. Thanks so much for showing all the incredible engineering that went into this phone.
Thank you and you're welcome :)
I love watching these type of videos! Thank you..
Thanks! And you're welcome 😀👍
wow ! I wish I had a particle of your art. you are great.
Thank you!
this video helped me realize my top bettery is messing up. THANK YOU!!!
you're welcome :)
I would have liked to see a few flips opening and closing once it was back together, just to see how it holds up after a repair. Great video nonetheless!
Thanks! Ya should have opened and closed a few times. But I can tell you if the fold screen is not adhered back to the frame, it can crack or get damaged if you close it and it folds incorrectly. So always best to either get a flip assembly with the screen pre attached for replacement or make sure to use the original pre cut adhesives which eventually will become available to attach a replacement to the frame to ensure a correct installation. :)
Omg damn, the screen still works afterwards!!! Well done haha
lol ya, had to be really careful and spend a lot of time prying it off with heat and some isopropyl alcohol. Thanks! :)
Good evening,
I came across your video because my phone power off every time I close the phone (except when plugged to charger) . Tried a couple things and I think it's the flex cable that needs to be replaced. Do you have a video or can you guide me how easy is it to replace it?
A new screen cost $$$ and the flex cable is only a few dollars.
Hi, awesome video, do you think the factory thermal paste is good? or maybe an mx-4 8,5W/(mK) would help it dissipate heat more effectively, maybe the phone feels more hot in the hand but processor could be more cool, what do you think? some good thermal pad between ram and 3d graphite could do something?
For the most part its good. If you do plan on replacing the thermal paste or adding thermal pads etc, just make sure the thermal paste is not a highly conductive one, since if it leaks around, it can short the phone or components. Better thermal paste will help with heat transfer but the difference wont be all that much to notice. So not worth taking it apart to replace unless you need to make a repair on something and are going to take it apart already.
This guy is so talented,cool and underrated.... ❤️
Thanks!
Have you removed the cover screen? How does it attach, and is it simply glued around the edges?
Hi sir, I recently dropped my phone and scratched that plastic border you took off before taking the screen off. Is there anyway that I can contact you to do the same repair to my phone. The screen is in perfect shape just the border needs replacing.
I have a Flip 3 with a broken screen. The cost of a replacement screen in the UK does not make it worth repairing. I have tried every option to access the phone to offload the photos etc without success as the phone is not in debug mode. Does anyone know of a way to connect a cheap mobile screen to the device so I can unlock it and offload the data then I can reset it to factory defaults and sell it as parts. I would have thought that Samsung would use the same connector and pin out on different mobiles. I imagine this would be useful to a lot of users with flips.
what about the digitizer is it built into the screen or phone where a cable is connected?
Absolutely revea.ing.a great treat seeing the inside.u did it so expertly.
Thanks :)
Did you have to reapply the adhesive before putting back together?
Hi. I have this phone and my screen froze. I never backed up my photos. I was told it's a motherboard issue. Do you know if a motherboard can be repaired so I can transfer my photos? Ty
Fascinating. I wish we had a closer look at the hinge mechanism, I'm sure it's well built but how vulnerable is it to dust particles.
Here is a link if you need to see it in more detail www.theverge.com/22619139/samsung-galaxy-z-fold-3-flip-screen-durability-waterproof-aluminum
Owesome, great work, what is the red glue around the flex. I see two different color on both sides.
Thanks! Its a cured in place rubber gasket to prevent water from getting in from the opening.
How do you get the outer case to stick back on....did you use glue? If so which one?
Hi here is a link: www.ebay.com/itm/165919552574?hash=item26a193743e:g:O98AAOSwNlRj3BRY&amdata=enc%3AAQAIAAAA4O%2FX5uI5nvuqOcp2LO545wZrB47BY5IPoKVR6XzhMUG192iolTVlF4jCGWzXMnOakkyXjB97KfN4wKoC%2BfNSvSNH2luMFdKQj5DR4RcCoM2VqHGCugOPSTQBrcsUV9HpA7mYKyY%2BZApsvRBXMinzI%2FkPSWoS5eVxiu8vr8P7KlH2u2BaQkavlox4WjOVaZjegLMPtjpocLVLI8NQaVNq%2FQ7HYN6dZhlSOLeXtgqNyHyAJiu5RXQI%2FAJUodI5CALKyXFce3e8KrwGyD7fbXJ5t%2Bw2eASkWpXTyiP38m0TVMOy%7Ctkp%3ABFBMgsPKxvNi
Excelent video. What about the water resistance after it is re assembled is it compromised? Mine Z FLIP 3 got screen issues ( dead pixels on the hinge that stays always on) with 6 months of very careful use. It seems to be the TBF (time between failures ) on this new tech model. I would not recommend it... They fixed it (because it was still in warranty) but it seems will happen again in another 6 months and them with no warranty
Does isopropyl alcohol dissolve the waterproofing seals? Also, my Z Flip 3 temp sensor might not be working properly. When the phone is closed, it charges as normal but when I open the phone, it stops charging. I used a diagnostics app, and it says the battery temp is as low as 7 degrees Fahrenheit open. When I check the temp after having it closed, it's back in the normal range closer to 100 degrees, before jumping back down again because the phone isn't closed. I tried to raise the temp by running a game that makes the phone relatively hot, and the temp only got up to about 50 degrees and still wouldn't charge. It's never been opened before, and it hasn't sustained any major shocks. If you have any idea as to what the issue could be or any suggestions I could try, I'd be more grateful than you know.
Usually this is related to a bad wireless charger or sometimes charger port or battery. Also yes isopropyl alcohol will eat away a bit at the adhesive. It will still be sticky after the adhesive dissolves but wont hold as well as new adhesive.
What kind of adhesive to secure the lower back panel? Mine is coming off.
Great video. Thanks! My z flip 3 powers off every time the phone is folded. Apparently a common issue. In your opinion which part is the culprit?
Thanks. Hmm might be something to do with the flex cable which runs from one side of the flip to the other. Either the center might be damaged which would be a difficult part to replace since it's held in place with cure in place gaskets, or one of the connectors on either end of it may have gotten loose which would require to just re connect it.
Best video. Is it possible to change the flip mechanism. It broke during a fall
Thanks for the video! I’m working on fixing mine and it’s helped me out a ton!
after replacing the flex, the touch on the top line of the display does not work, could I have damaged the display? Could it be the tape's fault?
Great video this gave me a little bit of hope... I just had my flip 3 serviced because it keeps boot looping meaning it doesn't go pass the Samsung logo when powered on then it keeps restarting itself. :(( would u know the problem? They just told me they need to replace the board, but not sure what has cause it.
Do you have to tear the hole thing down to remove the screen or can you just remove it without taking out the batter and the back side??
Wow 1st channel do z fold 3 n z flip 2 teardown..superb as usual 👍🏻👍🏻👍🏻
Thanks! :)
if it uses adhesive for so many pieces, during reassembly do you need ro glue it back together? if so, what type of glue do you need to use?
Hi, yes you would need to re apply new adhesive. You can watch this video explaining: ruclips.net/video/T4iiPUIM7-Y/видео.html
@PBKreviews Thanks! Super helpful!
hey! @PBKreviews I think I found a glue that works for electronics, but i was just wondering, would using literal super glue be a bad idea? and if so, why?
Friggin sick, and it started right back up. Kudos. 👍
Thanks! :)
The glass of my bottom back battery cover panel is cracked. Do I need any adhesive to replace it?
yeah you would need replacement adhesive for it. Here is a link for one: www.ebay.com/itm/165919552574?hash=item26a193743e:g:O98AAOSwNlRj3BRY&amdata=enc%3AAQAIAAAA4O%2FX5uI5nvuqOcp2LO545wZx%2FluNsYtEPY0J5aeGqxqwBSNm0FLNw712dUufnMgnYcUMLQkYrzIO7gyuqaX1Av%2BB3sZ59esUWWRht8wXFsY8M6EWTmaehwCojKCY%2BGdG4GUoHiyinZrX1K4wQXdH%2BI1Lpbn6V9BU%2BPT6D0sLvJidyy3Bg19FVYCurJZeHjDyYW5cD86UQusP039BRU3%2BYIDCRqzTbteuY41u5pw4xhM1ohRXqfoifLOJ0Wh68vtwvM60J3L%2Bgss%2BBs1Ijwg5MtgGPYQNGr13ncF6eAHnlF2r%7Ctkp%3ABFBM2LmK_5Fi
oh wow, what an in-depth video. so amazing... I'm seeing you replying to newer comments, so i hope you😅 can help with mine? do you suppose the screen flex connector is replacable? cause I'm typing in a flip 3 that's currently not dead but dying 😢 it's not the screen since it works well when opened partway, however it may be the connector that's been comprised. it just seizes working completely upon opening fully, so I'm guessing it truly is that one small part... however, i only see the main motherboard to screen cable floating around in parts shops, so i'm starting to worry my phone's done for...
I'm not sure exactly what could be the issue, might be the flex cable which is between flips which went bad, which is replaceable ( www.mobilesentrix.com/mainboard-flex-cable-for-samsung-galaxy-z-flip-3-5g-f711 ) but if its the actual flex cable for the screen, you would probably need a new display.
So you only need to heat up thr adhesive to remove the cover but it will go back on without applying anything once you're done?
You would need to apply new adhesive when re applying it back to have a proper hold/seal. You can watch this video on adhesive installation: ruclips.net/video/T4iiPUIM7-Y/видео.html
For the front camera glass lens. Do you have to take the front case off before heating them up and replacing them? Or can you do it while the front face is still attached?
Hey PBKreviews, It would be interesting to see the hinge mechanism. Can we get a teardown of the hinge? Great content!
Hi thanks! You can see somewhat more in detail on this website www.theverge.com/22619139/samsung-galaxy-z-fold-3-flip-screen-durability-waterproof-aluminum
@@PBKreviews awesome! Thanks for the resource. Keep up the great work!!
@@samk8862 thanks and you're welcome
Would changing the motherboard with an unlocked motherboard work. Or would I have to change the sub board as well
Ya would work.
@@PBKreviews thanks. Keep up the videos
Is that 3,300mAh battery power split between the 2 batteries? How much mAh is the little one?
2370mAh and 900mAh
@@walkrunjump Thank you
yes correct, as the previous comment mentioned.
This gives me confidence that I can replace the lower speaker. Looks pretty straight forward
👍
What kind of adhesive is used on the screen edge? Mine has worn out.
Awesome, even faster than iFixit😉
:) Thanks!
This is gonna be a fun repair, since mine won't open past half way
how do you remove the Volume button?? Just saying to remove the adhesive doesn't really help. Everything else was helpful but I need to replace the Volume Button and I don't want to make anything worst.
You just need to gently peel off the flex cable portion from the frame itself so it doesn't tear, then you pull out the assembly from the two metal brackets on either side of the assembly which is in the slot of the frame. You can use a small flat head or another tool to pull the metal bracket out which is holding the volume button assembly in the slot.
Sir! It's big problem to put back this border plastick on the front? Thx for answer
yeah its annoying. You can use B-7000 glue (and use light clamps to keep it down until it dries) but have to be careful and apply very little and thin so it doesn't leak out too much. You can rub off excess if it leaks out after it has dried.
@@PBKreviews Thank You!
Does company gives you phone or You Buy phone for disassembly?
I buy all the phones for disassembly. :) I don't think any company would give out phones to be taken apart since they don't really want their design and internals to be shown to other companies too close to release or other reasons but for reviewing phones and talking about them without taking them apart is another story but ya those I am not given either at this moment in time and need to buy on my own.
What are the magnets for? Is it keep the phone close? Thanks
Yea helps the flip close more secure but its not that strong to make it difficult to open.
Does the phone work without the NFC /Wireless charging unit?
Could you maybe show us how much heat youre applying? And also on which areas?
Do you need a special glue to glue everything back together?
Usually replacement battery door/covers or back plates etc come with the original pre cut adhesive installed. If not, here is a link to one of the original pre cut adhesives that is for the phone: www.ebay.com/itm/403560387272?hash=item5df612d2c8:g:cAsAAOSwT3ZiOvO9
Love your videos
Thanks!
I bought a flip 3 with 256gb motherboard. Can I swap it out on my phone without having to do any reprogramming?
Can you or someone please tell me what kind of glue I can use to fix the front screen panel. Mine is coming undone and I can lift almost the entire panel up off the phone and before it's all the way off I'd like to clean it up and glue it back on so I don't get water or any more dirt/debris in there! I'm curious if a tiny amount of epoxy red or blue would work. If not what glue/adhesive do I need!? I've read online that T-7000 glue is what's used but I can't get it unless I order it. Just want to be sure first before buying or trying anything this close to the circuit boards and screen
Hi, this is the part you need. www.ebay.com/itm/403560387272?hash=item5df612d2c8:g:cAsAAOSwT3ZiOvO9
I still have nightmare when disassembly my SE Xperia Play back then, when I repair the flex cable.
I don't think I'm ready repair this piece of expensive hardware by myself if it's break.
👍 yep, its a difficult one
hello, how do you glue the back panels?
you need the original pre cut adhesive strips like this: www.ebay.com/itm/165919552574?hash=item26a193743e:g:O98AAOSwNlRj3BRY&amdata=enc%3AAQAIAAAA4O%2FX5uI5nvuqOcp2LO545waI01pd7u7CyR%2B%2FQ1egRN3poLcYUw4cfcsC2vutcgbAxK87OhGabI1tiUWkc%2BIkN%2B5E0gJLpiu%2FfmON2yDJ1PEnWsZyiHaDtE778IQtIlqxBGrbrNsHO6R4zcLQqUCmIYklHLUMXZllCX3dou5%2FBbIsaJ1XzPSIivYwDOtw%2FfT%2BJhyhIIfywTQ86AJiO1s%2Fv2fnsnEAUY8HwvKlOIbNkGhhf87ghCfZUG2ffBcz8BQ8Si3YnSaMxSAxZxVJ6AyfXYT6y4M6riD1VeQfeapR5zgr%7Ctkp%3ABFBMnvGWsP1h
Can the zflip3 front screen be replaced without needing a factory reset wiping all data? My wife screen suddenly went black and will not power on. Phone rear screen works so seems phone boots
We want to backup pictures but this phone does not have hdmi capability through usb-c 3.1 port
Yea I don't think you need to do any resets for changing the screen.
How to move second screen, from the backdoor?, can you make video
Which one is the network receiver? Mine is broken.
Does the small Lcd detach from the glass on the outside?
I believe it does if I'm not mistaken, however the replacement parts all come with the screen and glass pre attached from what I have seen
Great video waiting for it. Thanks.
Thanks!👍
What type of adhesive should i use if i try to dissasemble the cover screen?
www.ebay.com/itm/165919552574?itmmeta=01HSAZD721GYKYHGFRA7RZA3TN&hash=item26a193743e:g:O98AAOSwNlRj3BRY&itmprp=enc%3AAQAJAAAAwOGaLmFDd%2B89lgzi2JRCbSE3m%2FaFHYiRnRKWlZKxb4lUlYFNWGRutQKIWp%2FDQLDwBBwmw4dkp4JCpATvjJLqKdYWYiTuigr5wTy8whYfUePP%2FSZ7pQod0T30gIFzAQwYK6uyhIjcjDVYVBOVWn4JIcZEQrrp3azNA62zx%2F7m%2Fo1i0dbMd3i372fV3mcIGTrFzfwlOXX0G5ON7mp8uzPs331mTaPrNMiVxRo4bSU1URtu09pfnymseNjJMLV3SFUBUw%3D%3D%7Ctkp%3ABlBMUJjxtN_KYw
So 12,69Wh of total battery capacity. Thats only about 20% less than the S21 15,5 Wh, 4000mah battery has to offer. Thx to the secondary screen which gets about 15-20% of total screen on time in my usecase, I get easy through the day. Battery life is about the same than on my 4000mah 6,5" SD855 smartphone i used before.
wow ! the hinge has 13 screw
looks durable
Hola saben si estás baterías son iguales al z Flip 1???
no they are different
Hello, would you repair to Motorola edge 20 pro?
Hi yes in a few days
is that any different of sm-F711 and sm-F711B?
Is waterproof available after your incredible teardown?
If you use new original pre cut adhesive that is made for the phone when re assembling, then it would retain the water resistance. But as of now it is not available yet :)
Should the batteries be replaced as a set or just the bad one?
Just the bad ones, no need to replace a none defective one since they are not married/linked to one another.
@@PBKreviews so each screen has its own battery PBK?
@@mgomez5606 not sure which battery powers what, but I dont think the phone would work with either battery missing or not working.
Are you reapplying adhesive?
Yes, on the video i dont do it to save time since it takes quite a bit of time to do, but afterwards I apply new adhesive.
man, you're the man
:) Thank you
I have Flex mode Sensor fault. Phone will power off when i closed flip. Phone will stay ON if connected to charging. Battery and LCD test OK. Can you advise what could be issue and how to fixed? Thanks
Not sure exactly, but can be a bad flex cable connecting the bottom half to the top half, can be loose cable connection, causing the cable to disconnect when flip is being closed from either the battery or the flex cable connecting the top to the bottom. It can also be a short somewhere, so not sure exactly.
@PBKreviews Thanks . Can you let me know how to replace the Flex Cable? Do I need to remove screen to do it or can be done from the back ?