CHAMPION Oil Filter Cut Open! | Build Quality Review | COS3593A
HTML-код
- Опубликовано: 26 авг 2024
- Here is a build quality reviews of Champion's COS3593A oil filter. Enjoy!
Filter Efficiency: 99% for particles greater than 20 microns per ISO 4548-12.
Champion Oil Filters: www.championau...
Product page: drivcat.com/ov...
***********************************
More cutup vids:
Mobil-1: • Mobil-1 Oil Filter Cut...
FRAM: • FRAM Oil Filters Cut O...
AMSOIL: • AMSOIL Oil Filter Cut ...
***********************************
#oilfilter
I think the K&N filters deserve a second video. They updated the design and it looks similar to the Walmart Super Tech filter, at least the inlet holes, gasket area, and metal casing. The inside is standard K&N I'd imagine.
I am very pleased with this video. Thank you for pulling thoriugh to making this video. I like these filters. I heard Fram has a new oil filter, Fram Titanium that is exclusively sold at Advance auto parts. Thanks for another great video.
Another good video, thank you. Good for everyone out there doing your own maintenance! Having watched many filter videos over the last year of so, and using the products myself, I might suggest a couple of things. Keep it simple everyone- go get a PurolatorONE or a Car Quest premium filter and change your oil every 5-6k miles. With a little bit of looking around, you can find these for about $7 a piece. If you need a heavier duty/higher quality filter, get a Purolator Boss or a Fram Ultra Synthetic. Look for sales, coupons, or mail in rebates and you can get these for less than $9.
Filters _Made In MEXICO_ are some of the BEST that I've used, *WIX* also has some really good examples.
I've used some chinese ones that were impressive. Really comes down to what factory, rather than where it is.
Surprisingly well made, I’m impressed. Though I’m torn between lots of cramped filtering media like Champion vs. media backed by wire mesh like Amsoil. Not sure of advantages and disadvantages of each
Wire holds up in case the filter media is weakened. At least that's the logic.
FYI Federal Mogul was purchased by Tenneco in 2018 and then they spun off all their Auto brands as DRiV in 2019.
Great video. I was using these Champion filters on my ford 5.0 and ended up having an issue with it leaking. The seal is way thicker then all the other filters for my application both in width and depth. So it requires a lot more force to make sure it seals well. But it was also blocking off a bit of the oil passage with the thicker o ring. I’ve stopped using them and moved back to the fram ultra which I have never had an issue with. I still won’t use the prone to tear motorcrafts.
Yes. Me too...., thanks.....
Thanks for the thorough reviews. Since this company has gone through several owners, any chance you can update with a new sample? Wonder how much the new ones have change (if any). Seems the oil filter business is very fluid....lots of changes to manufactures. Supposedly RP has changed their filter source. M1 is now being made by Purolator, etc. It is very hard to keep track of these changes and if they implement cost cutting and reduce quality of the products.
Champion is made by fram. The part numbers are the same.
Thanks, interesting......
Would love to see some supertech oil filter reviews
Could you possibly do a "tear down" on a Baldwin filter next?
Not a bad filter, but we need to bring those jobs back to the U.S. I am trying to wean myself off of foreign made stuff. It is not easy
You could always build a factory and make them yourself , then deal with employees and unions sucking every penny you earn
Interestingly, thanks, I am buying more American if possible, ,,,!!!!! Anyways, my MOPAR Dealer uses the PERFORMAX P7 ( were MEXICO, now labeled MADE *USA, SOPUS PRODUCTS.., APPROX six month AGO, ), ON MY 2015 Dodge Journey,program Oil,Changes (* first TIME IN MY LIFE ever signed up for Dealer OIL Changes,:: **5W-20 **conventional @ 3 month or 3K(( Dusty severe Driving).....
Napa Gold oil filter part #1794
Interested to see what the the taller filters have to offer.
Napa line of filter reviews.. all 4 ?
mgl1036 microguard filter from oreillys would be awesome
Great Video! Motocraft fl-820s!
Good video. I’d like to see the Ecoguard synthetic filter. Has a green outside cap. Seems very well made. And for my truck, a little bigger than the Bosch I used to use.
Those "louvres" on the inner tube of a Champion filter look so tiny and narrow compared to regular full-size oil passage holes on the Amsoil filter..
No other filter I know of has oil passage holes that tiny.
I don't see how this can be good for oil flow.
Any thoughts or feedback on that?
I’m really surprised at this. Champion has always had that “cheap” reputation
I think some filters have the 5-hole plate in order to improve the reliability of the anti-drainback valve. As you can see here, the holes are getting very close to the sealing area of the anti-drainback valve. Any distortion in the sealing area caused by these holes will affect the anti-drainback reliability. Therefore 5 holes is better than 8. At least that is my crazy conspiracy theory. The restriction of the 5 shallow apertures is likely very little compared to the restriction of the engine oil galleys themselves and of the anti-drainback valve, not to mention the filter media.
I think the anti-drainback valve is as important if not more so than the filter media. This is because when the car is started, any oil not retained causes a delay in oil reaching the main bearings and everything else. As we know, 80% or more of engine wear comes from cranking, so by minimizing dry cranking we eliminate a disproportionate amount of wear.
Some cars will not enable ignition until the oil pressure comes up, so on these cars you can judge the quality of the anti-drainback valve by how fast the car starts.
Thanks, interestingly I use ROYAL PURPLE Filters in longer term,,and NAPA GOLD , COnventional oil,or SHORT TERM UAES...
I would like to see Mahle and a Tokyo Roki filters looked at.
I run a Mahle and I'd like to see one cut open too!
A general question about anti-drainback valves,............if the oil filter on one's car is vertically positioned does a silicon ADV matter? I mean why would oil leave an oil filter that's vertical when the car is off?
Thanks, me too. My 2015 Journey 4CYL: is vertical: OIL filter in front of engine, & always did appear gravity would not allow oil to drain UPINTO ENGINE , ETC. INTERESTINGLY, my GMC CANYOIN 4CYL : Oil Filter mounts horizontally, I just careful Prime /charge new filter , allowing soak more than half full approx,.,wipe &. Check mounting plate, THEN PROPer hand tight/torque; checking & wiping slight oil; run Engine & recheck,etc. Obviously, lot of oil drains out on removal, and new filter Charge spills out also. Efkre tightening! Always seems strange to “” me, this horizontal Mount “.... Interestingly, the NAPA GOLD line-up has a second ,longer fitting, FILTER THAT some (?) may , or COULD. use (short of Touching RADIATOR), or at least TEXC SAID THAT one fits applications Also, even being inches longer.
The supertech filter i looked at today was different then the ones i seen in your videos. Update video???
You are the second person to bring this up. I may need to do just that.
They're no longer made by *WIX.*
Any oem like a motorcraft or a Mopar oil filter or a mazda oil filter
Good show.
When so tightly packed, it will be restricted to flow oil.
Is it possible you do an update review of the Fram PH8A. Fram has updated it to 10k miles and with a silicon check valve. Was curious if the inside is made any better or worse.
How do these compare with KnN and Mobil 1 oil filters? Would Champion be a better option?
Try mighty auto parts oil filter.
I got champion oil filters for my car on rock auto for 1.30 each
Ford Motorcraft oil filter FL-500
Compare to ford fl 1a
Could you please do an Ecogard review?
I've gotten multiple requests for ecoguard. I think I will do that one next. Thanks for the input 👍
Ps: can you do PERFORMAX PO 167 Oil Filter ?,? ( my last **two Filters :labelled “USA , DIST SOPUS, PO BOX 4921, Houston TX 77210)”.. Interestingly, were **LABELLED made in **MEXICO! (?), previous Filters I have examined : my MOPAR DEALER USES THES IN THE oil change “ Program” with conventional MOPAR 5w-20 ......on my New car Purchase. .....( first time I have ever used Dealer Program... Anyways thanks,
please cut open a genuine toyota filter from a dealer and an amazon toyota filter to see the difference in the fake and genuine