Chainsaw Mill: How To, Tips, & Tricks Cutting Boards & Lumber
HTML-код
- Опубликовано: 3 июл 2021
- How to use a chainsaw mill, with my tips and tricks for best finish and operation. Using a Grandburg chainsaw mill to cut up some cedar into boards and beams. This video has some good tips and tricks as well as operational guide lines for using a chainsaw mill or small portable saw mill. The current price of lumber makes a chainsaw mill well worth the money! Cutting your own lumber, boards, beams, and timbers is fun, rewarding and saves you a ton of cash.
AFFILIATE LINKS
What's an affiliate link? If you use our link to buy something, MBMM gets a small percentage of the money you spend. This DOES NOT mean you will spend more money using our link, you will spend the SAME AMOUNT of money while also supporting a small business and channel.
Logging Supplies
Chainsaw: amzn.to/3q30ivD
Chainsaw Wedges: amzn.to/433xDW9
Chainsaw Sharpening Kit: amzn.to/3BRpfNm
Chainsaw Storage Case: amzn.to/4354p9k
Logging Tape: amzn.to/45sFAFI
Flagging Tape: amzn.to/3qf65OI
Falling Axe: amzn.to/3otvzHU
Peavey Pole: amzn.to/43pTiYo
Chainsaw Gas and Oil Can: amzn.to/3Izsg8Y
Logging Chokers: amzn.to/43sdCbB
Logging PPE:
Chainsaw Chaps: amzn.to/3IENnGH
Chainsaw Gloves: amzn.to/3IEx6Bw
Chainsaw Face Shield: amzn.to/436luzw
Work Boot: amzn.to/3WMyhoJ
Spiked Caulk Boot: amzn.to/432Av5n
Work Pants: amzn.to/3MuS1s5
Work Coat: amzn.to/45xhZ6P
Work Shirt: amzn.to/3ODli6E
Earplugs: amzn.to/436nlV0
Safety Vest: amzn.to/3q4bQil
Saw Mills & Supplies:
Wood Mizer Bandsaw Mill: amzn.to/3q9NS5p
Alaska Chainsaw Mill: amzn.to/3WtjU8B
Chainsaw Mill Rail: amzn.to/3Oy5phL
Chainsaw Mill Brackets: amzn.to/3q4808V
Timber Tuff Chainsaw Mill: amzn.to/3N4sUhr
Tree Scaling Stick: amzn.to/434lro1
Tools:
Tool Kit: amzn.to/3otXWWo
Hydraulic Oil: amzn.to/3oxh1Xy
Grease Gun with Grease Cartridge: amzn.to/43oC3q9
Planer: amzn.to/3MUxjDh
Router and Table: amzn.to/3MxcxbE
Tree Planting Supplies:
Tree Planting Bag: amzn.to/3otZRu4
Tree Planting Shovel: amzn.to/3BUAQv9
Bamboo Stakes: amzn.to/3OzaqXr
Game Camera: amzn.to/3MwL2ij
Beekeeping Supplies:
Beekeeping Kit: amzn.to/3BRwZiv
Complete Bee Hive: amzn.to/45vWF1s
Mason Bee House: amzn.to/3IIeZuD
Beekeeping Suit: amzn.to/3MpH1Mo
Beekeeping Accessories: amzn.to/3MvQfHi
Beekeeping for Beginners Book: amzn.to/3OGnES7
Starting and Growing Seedlings
Fruit Tree Grafting Kit: amzn.to/3oCcCmd
Green House: amzn.to/3IDWI1G
Seed Starting Kit: amzn.to/3MW9wCQ
BioChar: amzn.to/3MUj9lC
Haha. You are everywhere. I am looking at Alaskan mill videos before I try my first cut ever with mine. Your video pops up. I watch your smelting videos with my prospecting channel. And here you are with the forest products.
This is one of the best portable Chainsaw Mill How-To Set-Up videos I have ever seen
Thank you!
@@SJForestProducts Yep, that was very sweet. Answered several of my questions. Thank you.
Thanks for not editing out the missteps - it's very informative to show all the things we'll need to think about when using a chainsaw mill. We all know this is how we work - got an idea, find out it needs to be tweaked as the situation unfolds. End product, you got a decent timber and some usable boards - job done
A little thing a lot of people might not notice about your prep work that is, in my opinion, crucial. I noticed you keep the area around your work clean, with a clear walkway. The key to you being able to go from one end to the other smoothly is that you’re not tripping on stuff or having to walk around a bunch or stuff. To keep consistent light pressure means not having to stop your cut.
Great video, nice to see some small scale production using limited equipment. Nice final product!
Thanks Scirate! Glad you enjoyed the video. Stay tuned for more coming soon!
Excellent Video
Thank You For This Friend
this is exactly what i was looking for all day yesterday. lol first video that came up this morning. ty sir
Excellent learning video. Thank you.
Glad you liked it!
I'm giving you just an idea, you could have the end plates wider so you have a bigger space between the square tube, and a screw on the side of each square tube to keep it from sliding.
Keep up , good work.
That is a good idea. I will try it!
Cool video! Very well thought out jig and template!!
Thanks! Thanks for watching
Awesome stuff, Jason.
Thanks Mark!
Thanks for another informative video! I have been looking to get confirmation that it makes sense to not stop to drive in wedges. But no-one seems to comment on that. I also own a Logosol F2+. And with that mill, wedges are never mentioned. That's why I started thinking if I could skip them for the Alaskan Mill as well.
Awesome 👏🏻
Very clear and consistant, and iinformative, simple and pleasant to watch. Thumbs up and thank you very muc h Jason.
Since you have the forklift which will allow you to setup wherever you want, you could use a gravity assist to help consistently pull the saw through. Rope attached to your mill, pulley or two to elevate a weight and redirect the pull and Bob's your uncle.
Great idea! Use gravity to your advantage! Thanks
cool video, I just found your channel and am enjoying your old videos. I see in your profile description that you are in Skagit County, I am in Conway so am local to you. Pretty cool! I play around with a chainsaw mill in my spare time, am pretty focused on it to large live edge slabs. Neat to see you making lumber with yours, it's a labor of love for sure!
Hi Jeremy. I have moved on to a Baker saw mill for most of my lumber. I am getting back into the alaska mill though and will cut some slabs on some up coming videos. Stay tuned!
very nice! i started milling with a 462 and since have upgraded to the 881 for a larger capacity
the alaskan winch from granberg really helps not only with cut quality but also helps feed the mill consistently
Cool! I started with the 462, now I am running a 500i with a 36" bar. Most of my wood is under 30" so works perfect for me. They are great saws. How long is the bar on your 881?
@@SJForestProducts i ran a 36" on the 462 and my 881 came with a 36" which im using now but i have a 64" bar and 72" mill on order from Granberg
Make the end guide plates or of plastic. Use an old cutting board that you can get for one or two dollars at a charity resale or yard sale
That is a GREAT idea! Thanks!
nice, thanks.
Please make another video of how you set up for the thinner planks. I have absolutely no idea and was dissappointed. The first part was great.
On the steel bracket I personally like a wider spread for the rails to keep the saw more stable. I do like the steel plates but would make a set for multiple width of logs.
Don't add tacks, weld nuts to your guide support plates and use bolts to clamp your tubes. It will be less work and more versatile.
Cheers from Australia.
That is a great idea! Thanks for the suggestion. I will be using your idea, keep an eye out for it in future videos!
Exelente
Roll the log back over and use your fresh cut as your support for the Alaska saw mill.
Great idea using rhe lift truck. Interesting that you didn't use wedges and got a great cut. Granberg says to use wedges, but they don't use the rails.
nice
Something I'm wondering. After making the first top and side cut, why not simply drop the chainsaw inside the mill by 6 or 8 inches and do the second cut, resting the mill on the newly flatten surface?
I think its easier to keep everything set and just cut off slabs. Thanks for the idea!
@@SJForestProducts i have my jig set for 6in to clear. that way, i can cut 6x6 posts without adjusting my mill, or re-attaching the jig. only need the jig for the 1st & 3rd cut
And maintains a much more likely parallel cut…
Ur are on point, and the slabs will maintain their width nicely, and u will be able to run through at least 4 logs faster and more accurately.
I'm thinking that the saddles for the guide rails could be made of the OSB, too and a few small wedges made from shingles would secure the rails to keep them from sliding. Your demonstration added a great dimension to my preparing my mill for logs I have. Thanks
Great idea! Thanks for commenting and watching!
Have you found that the bars are better than just using the initial flat cut as a guide for the subsequent parallel cuts? I'm just getting into milling.
Yes, I really like the bars for the initial cuts to take off the rounded outside part of the log. Once it is flat then you can run the mill directly on the wood. It works great!
Use your top cut and set the saw for 6".
Are your jigs on the big or small end of the log, top or bottom? Thank you for the video
Hope this isn't further down, but what keeps the rails from sliding in the slots during sawing?
Question answered on the nubs added @ 21:30
Well, that’s a good cheating idea. Never thought of that one and I’ve been making lumber for almost 30 years. lol❤
A garden hose works well to de-dirt a log.
Thanks for the tip!
Works for hardwood?
My dad had an old saying that was cut twice and then begin to measure needless to say he wasn't a very good Carpenter
Haha! Well we all have our own style I guess
When the bars slide as you cut, I wonder if good old fashion duct tape could keep it from sliding?
Haha, good idea. Cheap and easy! That is what I like to hear. I might give that a try! Thanks for the suggestion!
How do I set the granberg Alaskan chainsaw mill to cut different thicknesses?
Jason where did you buy your do it yourself mill?
Great video, thank you. I tried milling for the first time this weekend. After a big storm, a buddy had many huge Spruce trees fall. He had pros come and deal with the mess, they saved 10x 9 foot sections and one 11 foot section for us to mill. Most around 20 to 28 inches in diameter. We are using my Husky Rancher with a 24 inch bar. But our cut times are more like 6 to 7 minutes and we use a tank of fuel per 2 or 3 cuts. What are we doing wrong to use so much fuel? I am guesstimating you got 9 cuts on 1.5 tanks of fuel? Is there that much of a difference between Spruce and cedar or are we working poorly? Thank you!
Its hard to tell, but here are a few things that could be the differences. 1 cedar is super soft and my logs have few if any knots, 2 could be sharpness of your chain? 3 maybe differences in saw size/efficiency? I just milled up some maple that was about 8' long and ~24" wide and I was using about 2/3 of a tank per slab so you actually weren't doing too bad. I hoped that helped. I will have some more milling vids coming out soon so I will try to go over a few of the things you mentioned in upcoming vids. Check out another video I have on my channel of some wide cedar slabs I milled up about a year ago. It might have some more info too. Thanks and good luck!
@@SJForestProducts Thank you for the quick reply. We head back next weekend to mill a few more logs, I will check the rest of the videos before then.
Ripping chain, sharp?
Question: did you use a ripping chain or a crosscut chain?
Hi! The mill works for hardwood, like maple, walnut etc..
Yep it works great for hardwood. I have cut maple, birch, and alder with it. Its a great way to make slabs
Thanks bro!
An other tip please, the time to dry, and works the wood?
It depends on the wood, how thick it is, moisture content, Etc. A good rule is 10% to 15% moisture and this could take 3 months to 12 months of drying
I plan to retire in the Philippines. Proper lumber is not found. All of it is cut by eye with a chainsaw. Storms and hurricanes knock over loads of wood to be bought on the cheap. I’m thinking that this would be a nice way to slice them up on site, leaving waist for the locals and cooking fires.
Sounds like fun. I bet they have some interesting wood over there. Thanks
How big are your plates that you put on the end of your logs before you start milling?
They are steel plates about 1/4" thick I think I cut them like 12" wide by 8" high or so. Thanks for watching and commenting
Great video. How is your hearing?
Huh?! What?! Can't hear you! Haha, just kidding. I always wear ear plugs :) Thanks for watching and commenting!
Does rip cutting dull the chain more quickly than cross cutting?
I'm not really sure, that is a good question. I would say that as long as the wood is clean then it probably doesn't make much difference as it is just a factor of how much wood each tooth cuts, but the grain direction may have something to do with it too.
Pretty grain for your cedar
🍻👍
Hi, do you use a rip chain or cross cut chain?
Ripping chain
What is the difference between a ripping chain and a cross cut?
The angle on the tooth is different. For a cross cut it is about 25 deg and a ripping chain is about 8-10 degrees
There's a couple videos out on how to make a cross cut into a ripping chain. You might find those to be of use. You have 2 teeth that are for clean out, that are half the width of normal cutters with 10° grind. The only advantage is smoother finish, but you will cut slower. If you're planning on plaining your boards then don't bother with the double the price ripping chain. Cross cut chain is significantly faster.
Maybe u should use skip chain maybe even full skip just my experience good luck 🍀 to u
Thanks for the tip
Actually, ripping chains are usually semi-chisel at 10 degrees, but any chain can be used. Any semi-chisel is best.
where did you get your rails ?
The rails are just 2x2 steel tube. Bought them at the steel store. Work great, but make sure your span is not so far they bend under the weight of the saw. If that happens you get boards that are thick in the middle and thin on the edges.
You could also use this set up if you wanted to buy something: Chainsaw Mill Brackets: amzn.to/3q4808V
What size bar?
28" on a 462
Why not leave the dirty side down then dirt wont fall on the cleaner bark.
That's a great idea. I will give it a try next time. Thanks for watching!
How to not make a 6x6 post
i wire brush the dirt off
Tips and tricks?
Good video up until the cutting the waste slabs to one inch. How did you hold them still? You should have explained it a little please.
Thanks for the tip. Next video I will have more details
id remove the Dawgs. ...
Power wash the log!
Where is your safety equipment when using the chainsaw
Thanks for watching!
Where is your safety equipment when using the chainsaw?
Thanks for your concern. I have chaps, gloves, safety glasses, and ear plugs. What am I missing?
@@SJForestProducts Many a woodworker has suffered maladies from the toxic effects of sawdust. Protect your lungs, too. From an old cabinet/furniture maker here.
6×6 beam with a huge heart crack....
Thanks for watching
Not on you when using the chainsaw mill
Thanks for watching!
It helps no one when you speed up these sawmill videos. And everyone of you do it. That only tells me that the product and process aren't worth it.
I quit watching after you aborted bark peeling.
haha, well, thanks for watching what you did! Check out my other videos for more!