I wanted to ask you guys for advice. I no longer trust my Stihl MC260 as it gave me repetitive problems even after it was repaired by a dealer. In other words, what chain saw of comparable size would be a good choice for cutting logs into lumber using my method ------------------------------- Friends, for your convenience I assembled a chronologically arranged list of videos about my efforts in establishing this log cabin camp in the off-grid remote location of Karelia (All Seasons): ------------------------------- 01 episode - @ (1 season) 2014 02 episode - @ (1 season) 2014 03 episode - @ (1 season) 2014 (not translated) 1 episode - @ (2 season) 2015 2 episode - @ (2 season) 2015 3 episode -@ (3 season) 2016 4 episode -@ (3 season) 2016 5 episode - @ (4 season) 2017 6 episode - @ (4 season) 2017 7 episode - @ (5 season) 2018 8 episode - @ (6 season) 2019 9 episode - @ (6 season) 2019 10 episode- @ (6 season) 2019 -------------------------------- My Patreon page: @t
Husqvarna every time, and good two stroke oil at 50 to 1. Never add more oil, more oil = weak mixture = runs hot and increases wear. Steer clear of any 2 stroke with oil metering.
For heavy work load I've been using the same Stihl MS 660 for almost 10 years with only minimal repairs. However, it is a considerably larger saw. *P.S., If you want to get away from Stihl you might try Husqvarna. I have a 480 CD that's over 30 years old, although it's worn out it still runs.
I have a couple Stihl saws but the one that most impressed is the huztl /holzforrma 372 I run a 41in bar on it and it has plenty of power and is cheap and been very reliable for me
You're a genius, Advoko! I used your method and in an afternoon practicing, I was able to cut perfectly straight oak boards 3cm thick and 3.3 metres long, from a fallen tree just using my stihl MSA 220 battery chainsaw. It's all about relaxing, and repeating the swinging technique. It's counter intuitive, but it works like magic!
I was running this saw for about 2 hours at about a 30-50% duty cycle ruclips.net/user/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
Intuitive and natural solutions come with repetition and being mindful of productivity. Safety first, ergonomic technique second, and productivity for the end customer third. It's taken me over 20 years to learn that.
I find it easier to cut of the edge with a "beam machine" especially with curvy logs. What advoko does works well but only on good straight uniform logs for me
Humans have been cutting straight boards for thousands of years using just saws and no jigs;) the industrial revolution unfortunately has made us forget a lot of these genius techniques....
Oh man, you just saved me quite a lot of money - now I'm definitely NOT buying any attachments or chainsaw sawmills. I'm rather investing the time to master this technique of yours! Thanks for this video
"It takes years to acquire simple wisdom." I had to pause for a second when I heard him say that. If that's all anyone takes away from this video, you're ahead of the game.
I should add I cut a couple logs in half, and had to use a draw knife to try to even out the result, plus I didn't use a plumb line. So, lesson learned. But anyway: I accomplished several small projects this summer, mostly thanks to watching videos like yours, Survival Russia, and several other smaller bushcraft channels and various wood-working (finnish, norwegian, baltic cabin/wood working tutorials) videos. So thanks for that!
Before I knew chainsaw milling was even possible, I was speaking to a local farmer around here who runs a small shop out of a wooden hut he constructed himself out of thin, smooth but irregular self-milled planks. When I asked how he built the thing, he told me he used a chainsaw. Blown away, I asked what kind of tech he used to pull it off. He told me "I used some pretty advanced equipment...you ever heard of a 2x4?" For years, his response eluded me. Now I think I finally understand what he was getting at. Can't wait to try it. Thank you for sharing your wisdom!!
Hands down, this is the single most helpful chainsaw tutorial I have seen for felled trees. Came to the same conclusion on Alaskan mills and milling attachments, and have been relying on a ruler and chalk line for about a year. The swinging motion and limiting the number of teeth that come in contact with the wood has tripled my production, but not fuel usage. I just slabbed an 2 meter section of 45cm walnut - each slice took about 5 mins and maybe 1/4 tank of fuel with a Stihl MS271.
It does seem RUclips is maturing and the sharing and learning community is rising to the top, especially when the algorithm has dialed in the kinds of things you would naturally fit your interests.
Great video. I have access to lots of eastern red cedar logs. I was thinking about the hassle of purchasing a chainsaw mill and then I watched your video. I followed your instructions and my very first log turned out beautifully. Letting the saw cut the way it wants saves time, fuel, wear and tear on the machine and yourself. You are a great teacher. Thank you for sharing your secrets instead of selling them. You have gained much respect by many. God bless you and your family.
This is an immensely useful and insightful guide to making primitive lumber squarely. Once again, I am reaffirmed in my suspicions that this is some of the finest content on the internet. Thank you for your time.
I gotta say l think you're right mate, there's that thing about practical demonstration using tools and methods most everybody can relate to that makes these videos so watchable
I applied your concepts and with a little practice, I am convinced this is the absolute best chainsaw milling video on youtube. Chain stays sharp 10 times longer. I would suggest novices watch bucking billie ray’s videos on chain sharpening and make sure to use your gauge for guides so cuts stay nice and straight.
These guys are better ruclips.net/video/lBifLlfQXho/видео.html&ab_channel=BlindOwlOutdoors ruclips.net/video/MTIDt_dafVE/видео.html&ab_channel=LadyfarmerthinksBIG ruclips.net/video/_I0gY7aTfoU/видео.html&ab_channel=Zaleroseinthecountryside
@@rap3208 yeah but, Advoko Makes explains it better, he actually explains the "why" and the "how." if you presented to me those three videos of cutting the lumber I would have thought "wow that's impressive" but then I would think also "I wonder how the hell even do that?" the author makes their videos make sense. And yes, maybe they are executing better because they discovered the technique themselves and maybe they've had much more execution-experince but it does not discount the value of this particular video. Surely you can agree with the basic comparison that we're making here right?
Much respect for your work ethic and approaches to problem solving. Every aspect of this video appealed to my artist-engineer- outdoorsman brain. Well worth the watch. Subscription earned.
"If I had two hours to chop down a tree, I would spend one hour sharpening the blade" -Abraham Lincoln...thank you for sharing this information, I am very impressed...
The time got me thinking so I looked it up, it's not an Abraham Lincoln quote but from an anonymous woodworker in 1956 (and he was talking minutes not hours) To Cut Down a Tree in Five Minutes Spend Three Minutes Sharpening Your Axe. :-) But the message is clear, even clearer without Abe's name.
I tried this method after seeing it in one of your videos on your other channel. I cut a massive elm log into slabs. It was so thick I had to roll it over half way through and cut from the other side. This method is so good, I was able to connect my cuts in the middle of the log. In all fairness, I was cutting very thick slabs and I had to do a bit of resurfacing, but still, a very good method.
@@rufushowe3885 A really sharp chain is important. Also, I should say, that my cuts widened out a bit more than his. I think this might help to keep the chain from binding. It was also my first attempt, so I could be totally wrong.
I tried this and it works very well. I even tried forcing it to make it cut a little faster, but the cut was no longer straight. You saved me a chainsaw mill! Thank you!
You are a genius -- I get that feeling when watching your videos. I'm a very experienced woodworker/carpenter and highly educated in quite a few subjects but I feel I could learn so much from you, as I already have just from watching your videos. Thank you so much for sharing your knowledge, experience, and wisdom. You have one of the best channels on RUclips. PS. I'm going to try this method.
This technique is exactly the way I make perfectly (mostly) straight cuts with a diamond blade in concrete. If you bury the blade slowly and with great focus on accuracy you can just relax once your buried and let the natural position of the blade find it's true course. Pushing gently forward and listening to the machine is all that is needed to keep straight along the way.
This also works great with regular old wood and a circular saw, plunge first at one end then let the saw do the work instead of cutting the good old fashioned way- a bit awkward at first but it works very well.
I used to work at a small welding shop, and I was frequently tasked with cutting a compound angle on heavy steel tube using only a grinder with cutoff discs, as our bandsaw wasn't up to the task. I used the same sort of technique, taking great care to begin the cut and then using the initial cut to guide the blade.
I was just cutting concrete slab today for bathroom remodel. I use your same method. True in cutting various materials is also true in life: don't force it.
I never plan on starting a chainsaw. I just like your voice. Years to acquire simple wisdom. Good people watch good videos. Russian and Canadians live in basically same environment. Different languages but a lot of the same traits. Tough independent.
Just want to give you a pro tip on the mill attachment. When using the mill attachment you should put wedges in the cut every 2 or 3 feet to suspend the board off the bar. I love you videos and hope this helps keep up the great work!
You remind me of my late father,in that your simple,yet thoughtful approach yields the desired results. Thinking a thing through in order to get something that is otherwise unavailable to the man that's willing to accept the negative. Thanks for reminding me of a forgotten lesson from my Dad
I have been living off-the-grid (OTG) for over 17 years now. I have hand-built-cobbled and duct-taped together all sorts of things. None of them look as good as any of your stuff. I would not presume to give you any advice on anything whatsoever. You, sir, are wasted in law. Huge respect.
This is the same chainsaw that I became so frustrated with that one day on the way home from my farm, I pulled over on the side of the road, reached into the back of the truck, set the chainsaw on the shoulder of the highway, and drove to the nearest Echo dealership where I purchased the CS-590 that I've had for the last five years. I hear people say all the time that Stihl makes a great saw, but that wasn't my experience. Great advice on that. Your process there gave me an idea on how to field mill short logs, too, Max. One day when I get around to making it, I'll send you some pictures. Thanks so much for all of this and take care!
I wasn't to sure about this guy in the beginning of the video, but absolutely convinced this man is a craftsman by the end. Thank you for sharing some quality knowledge.
I tried out your technique today and it worked! Amazingly easy. I have been struggling with an alaskan style mill which even with a brand new chain was hard work, very hard on the motor and the chain blunted very quickly. I use an old Stihl 038 farmboss 66cc with a standard chain. Your method was much easier, less wearing on me and the machine and a lot quicker. I wore a lumbar support for my back, which I would definitely recommend. I actually enjoyed the process. It is strangely rewarding. Thank you for sharing this awesome technique and if anyone is not sure, give it a try. It doesn't need huge amounts of skill, the cut seems to make itself straight. Brilliant 👍😁
Being a woman and homesteading is hard enough but building a cabin by myself has seemed like an impossibly hard project. You have changed my outlook! Your log cutting technique is going to save me a lot of time and money. Now I can't wait to get started! Thank you for sharing!!
Kelly, there were quite a few of first-time success stories with this technique under this video. One guy even sent a video link. I hope it works out for you too.
Just finished splitting a 35 inch wide log this way. Thank you for this advise, I reviewed several complicated ways (Alaskan Mill, etc) prior to this video, but you nailed it with your two simple secrets. Спасибо земляк!
Logical, practical, and good advice. You trust the guide that takes you into an unknown forest so trust the guide that comes with the saw. Logic. Good video, keep em coming. 👍👍
I do not know how hard you have it in Russia, but you have proven that when a person uses their mind they can just about achieve anything! Unfortunately I'm scared that people are loosing the ability to think outside of the box anymore in which you have proven that you are a master at! I'm super impressed to say the least!!! I hope that people in other countries can and will learn to do things that are often seen as impossible! Thank you very much for your video!!!
Its hard to develop outside the box thinking when all your life is inside the box. Living in germany you simply don't get to experiment with the real fun stuff and the little experimenting you can do is expensive.
Excellent! This is exactly what I was waiting for. I am interested in starting to mill my own lumber. I like the method you have come up with for sawing straight boards. I also like that you went through all the pain of trying different jigs to come to the conclusion of this swinging method instead of me. Meaning, I am glad to learn from your experience. I'm anxious to see your progress with drying methods now. Thanks for sharing this, and I will stay tuned.
I thought the wooded beardsman dragging a log with a Suzuki with the roof cut off was the craziest thing I had seen. This guy just strapped 2 to a scooter! Lmao! That's awesome
Advoko One of the best dam videos on rough cut logs, lumber I have seen. Your are totally correct sir, your methods make cutting those logs easy. I have been using the Alaska mill for years and kept buying bigger saws to mill through that thick lumber. I think you could get a smaller saw to swing easier. I have been using a Husqvarna 372 and 394 on the Alaska mill, but those saws are too heavy for swinging with a heavy bar. So I pulled out my old Husky 450 and I had great results swinging vertically with a sharp ripping chain. Took me less than half the time to cut the log with your methods than the Alaska mill going horizontal and running all those saw teeth contacting the wood. Thanks for your simple and effective method.
Advoko, and Mr. 65895555, when using Advoko's method of vertical free hand milling with the swinging motion and just using the tip of the bar and chain, what kind of chain have you found works best? Skip tooth or full chisel? Advoko mentioned filing to 5 to 10 degree angle on the cutting tooth. Or is there a specific milling chain that works best for this method? By the way, thanks for your awesome advice and greetings from northern Minnesota.
I don't own a chainsaw. I don't cut the trees let alone make my own lumber, but I have carefully watched your video which is almost hypnotic, and I cannot remember the last time I did it with so much attention. Excellent work !
My mentor told me to trust the tool and let it do the cutting, you're just the guide. Center yourself repeat your movements like a machine and it will do what you want it to do. I liked your portable steel mill. I've thought of this exact thing, you're experience helps me see what I can expect if I were to build one. Thank you sir.
Excellent offering here thank you! Just recently I am back on my chain saw for all things at my home and was out of need having to cut an old poplar log this way. You are correct as the motion or swinging action with sharp chain creates the vertical cut, then repeat until quality is obtained. I am bulding a seated carving bench/sculptor's vise. From western Canada stay warm this winter!
Many decades ago, I stumbled on the same technique and found that it is very important to have level and unobstructed ground to operate from while doing this. Obstacles and uneven ground make walking backwards awkward-and uneven cutting the result. Loveya, bro. We live in the same world. I have lived in the Alaskan bush for well over 50 years, and TRULY feel closer to you than I do the people in Anchorage. I don't care what government is over us, our lives are the same. Wish we could meet. I have learned much from you, but I'm too old for this stuff. I'll pass it on to grandkids.
Ahhhh, if only. My chainsaw skills, even 40 years ago when I was young and strong as a bull, were never good enough to get this type of straight cut. I would watch in amazement as my older (read, senior) friends would take a 30" thick mesquite log and cut it into 4" slabs freehand. Anytime I tried a cut like that, it looked like a wavy potato chip. Great video. You clearly have gifts! The ability to make awesome, watchable, instructional videos, and the ability to cut logs like that!
Dear Sir, You are highly adept at bush craft skills & you equally think in scientific terms when it comes to cutting efficiency. Not only is your cutting technique very good but yields an excellent result as a far more economical method compared to all these chainsaws kits made for cutting tree logs slabs. You understand very well the limitations of chainsaws & how best to exploit their power in a much simpler alternative. Very well done. Kind regards.
Discovered this video by chance as a friend is seeking help in such building methods. I have run a MS260 for a decade that has cut down and bucked at least 50 cord of firewood plus trail cutting and with the exception of one carb kit it has never let me down even during the hardest use. I have only used a 16 inch bar so as to better fit on my quad. Thank you for such an informative video. Regards from BC Canada 🇨🇦
Thank you thank you !!!!! Best method by far! I tried it on a 1 year old oak trunk, with a Shindawa 55 g engine and a Lidl Parkside one of same engine (small and light to handle), bar was relatively standard size for such engine. This made the whole difference as, using a smaller chainsaw meant more stable movements and much less tiring on the arms. Made 3 cuts in an hour and half (first tests so we took it easy and had breaks)... Now I am super happy !!! Defo needs practice to move down and straight but, no competition . This is the best method. Thank you again !
Consider a Husqvarna "Rancher 460" with a 24" bar. I've used Husqvarna chainsaws since the 1980s, and have always found them to be the best. I tried Stihl, McCullough, and Poulen, and found them all to be inferior to Husqvarna. A good many people swear by Stihl, but I'll take a Husqvarna over a Stihl, any day of the week. Husqvarna tend to be less expensive, and generally offer "more saw" at the same price point of a Stihl. For example, on average, $500 gets you 60cc Husqvarna with a 24" bar, and a 50cc Stihl with a 20" bar. If yall think I've "bumped my head", or I'm "smoking something", please chime in. I'd love to hear your opinions. Great video! Thanks for the lesson. P.S. You might seriously consider spending the $75 on a full face shield, and hard hat. Safety glasses are great for flying splinters, et al. But I can tell you from personal experience, that if it weren't for "company policy" requiring us to wear full face protection on the job running our saws, I'd either be sitting here missing my vision in one eye, along with half a face, and some nasty scarred over stitch work. Or not here at all. Although it's fairly rare, "bar kick back" can, and does happen. And when it does, it's instant, and can be brutally violent. In my case, I hit a strand of barb wire that had been grown over and concealed inside a tree I was clearing. Chain brake bar worked, but only milliseconds AFTER the chain at the top front edge of the bar slammed into my face shield.
I run Husqvarna myself and couldn't agree more. I used to cut firewood for part of my income, and used Stihl saws. Both of my Stihls were broke and borrowed a rancher 460. After a week I decided Husqvarna was the way to go
For anyone wondering this technique of the swinging motion absolutely works. I am a complete novice with a chainsaw - probably used one for 2 years to cut and buck dead trees and storm blown trees. I wanted to create a bench out of a nice oak tree that has blown over. I used this swinging method and it was far easier than any other method I tried.
Thank you MaxEgorov! I learned a new technique which I will try in the coming weeks. My chainsaw is a Husqvarna 445 with an 18" (45cm) bar. It usually cuts very well with a sharp chain on most types of logs. We have plenty of forests & trees to work with here in Sweden, so it won't be long before I get to try your technique.
Crazy coincidence; This morning never seeing this method, I used it on some beautiful red cedar logs and was surprised by the accuracy. Not the best, but pretty good. I am sure it will be better next time using a bit more care as I proceed through the log. And the best tip you gave, obviously is a properly sharpened chain.
I remember watching one of your other videos, thinking you had to be bringing in supplies from outside because there's no way you could cut it that straight with just a chainsaw but you have proved me wrong. Great information!
Just saw this video and wanted to say thank you for the insight. I'm now working on a way to modify my chainsaw mill to allow the tip to sweep the log from side to side while advancing instead of using the length of the bar to make the cut. Wouldn't have thought of this without your video. Greatly appreciated!!
Amazing, your technique sounds like it shouldn't work yet you proved it by showing us in the video. I think you have saved lots of people extra work by sharing your secrets, thanks! 🙏
Your chainsaw video was one of the best I've seen on RUclips! You remind me of the old "tie hacks" who used to square railroad ties with an adz, walking from one end to the other with the adz cutting less than an inch from their feet. You are skilled and thoughtful!
Well done...perfect timing to help me as I have my first 3 logs to mill into lumber for an outdoor kitchen and also for a woodworker's bench. Your recommendation of using the tip of the blade to reduce friction perfectly solves the problem I had when I started. Thanks brother!
I tried something similar to this method: I used a $25 attachment that holds the chainsaw perpendicular to a 2x6. I made multiple passes, cutting 1" each time. When I got to 8" deep, I removed the attachment and cut the rest freehand. It worked!
Thank you so much for this amazing technique! I live on a timber farm and this has changed my life! Great guide and works flawlessly and efficiently after a little practice. I am using a Stihl MS382 with a ripping chain on a 50cm bar which works extremely well. Thank you once again you have really amazing content please keep it coming!
This is an awesome, well explained and professionally made video for anyone that is interested in cutting logs into slabs. I build log homes and run an older lumbermate2000 sawmill but at the moment do not have access to it because of snow. I need to cut an oak log for personal use and was planning to cut it free hand, after watching your video, I will try your techniques and have the confidence that it will turn out the way I hope. Thanks for taking the time to share your ideas, tips and craftsmanship with people that truly appreciate someone like yourself that takes the time to be a sharing and giver of knowledge. Thanks, stay safe and happy cutting.
Absolutely everytime I watch a video produced by you I learn an invaluable technique or method. You sir are a handyman genius Let me say that again a handyman genius!!!! . Everytime I run into a difficult situation or problem my wife ( Bless her) always says did you check Advoko to see if you had posted anything remote to my situation or problem, so you my friend are getting too close of a relationship with my wife. Lol thanks for another great video!!
I tried your method of cutting some red cedar logs into lumber I picked up the technique right away since I already had 24 years of experience running a chainsaw Your method WORKS EXTREMELY WELL Thank you for the tip
I've been cutting lumber like this for several years,you are the 1st I've seen to do the same.I use my older Stihl 041 and Husky 65l they are heavy but seem to handle it better than my other saws,I have a Husky 365 special that does well and is fairly light but I use it to fell trees mostly so don't want to lose it for that reason,I've recently bought a Husky 77l that I'm going to try soon just have not had time yet!Nice video
After building simple "chainsaw mill" and almost killing my Stihl after cutting single log I found your video. Man, this is awesome. I tried your method and I love it. First boards were not "perfect" at all, but pretty enough for outdoor bench I was about to make. And I can see that with more practice this can only get better. Me and my chainsaw are grateful ;) Greets from Poland.
I actually did this this weekend the results were promising! I was on a steep incline but still managed to get a flush cut. I cut through a 20 red oak that had fallen across one of my trail. The property is very steep but I made 3 cuts about 10 foot in length. I used about 2-1/2 tanks of gas to complete the 3 cuts. I had to borrow my neighbors saw in order to get the final 2 inches as my 18" still ms250 was just shy. However using the lighter saw for the majority of the work was very helpful. Thank you so much for this video! Also I was inspired by the moped. I strapped my to the side of the atv and it drove unhindered by the weight.
Hey Max, greetings from NY! Great video and I am sharing it with my brother who thinks he has to get a sawmill? After seeing you, he’ll know you are the HUMAN SAWMILL! Awesome skilled and thank you for sharing your knowledge with us around the world. I hope you are well with all of the madness going in the world and stay safe! Best regards
Tried your technique today and it really works like a charm. Just trusting that the tip of the saw goes streight. Excellent. Thanks and keep up the great work work...
Sharpness is a very important thing to maintain when using any cutting tools. Every so often I’ll be working on something and as the tool dulls I end up leaning harder on it or w/e and I really had to train myself to recognize these situations faster and instead of fighting with it, you take the ten or so minutes and go sharpen it. You might think it’ll take longer than if you just lean on it and force it (cuz you’re almost there!) but actually you’ll find to stop and go sharpen the tool, even though it takes some time will get the job done faster overall, not to mention you don’t have to fight with it, you won’t break the tool and ultimately you’re just being a better tradesman.
Max, everyone else is going to recommend you get a husqvarna or stihl, I am not everyone else. Looking at the piston of that saw its clear it failed due to *overheating*, that MS260 is not powerful enough for the job you're trying to do and nearly all new saws are designed to run very lean for emissions etc. You need an older design saw and I'm going to suggest a Makita (Dolmar), you could get the DCS6400/6401 or DCS7301. Also these should be cheaper than the other brands. You should run the best quality 2 stroke oil (not husqvarna/stihl) at a slightly higher ratio like 42-45:1, I recommend Motul 800 2T Off-road, it should be available in your country. yes its marketed for motorcycles but it's arguably one the best one you could use, many people use it for chainsaw in Australia and USA. It is more expensive yes but a new chainsaw costs more. I'm in Australia and I have many years experience in maintaining and running saws, i have husqvarna, stihl, echo, makita, Dolmar. I have looked these up for you : makita.ru/catalog/model/240.html www.motul.com/ru/ru/products/800-2t-factory-line-off-road--2 Edit: If you can't find a makita you could look for an older husqvarna such as a 359, 365, 372xp. These saws have many spare parts available, I would not recommend smaller saws for your work. Also the Makita 7301 is very similar in power and performance to the Husqvarna 372xp
Interesting! I like husqvarna and stihl, but i have only used them for forestry work, mainly drop felling and cross cutting, never for milling. I will check out makita next time i plan to get a saw, especially if i will use it for some milling. Thanks
Another vote for the Dolmar (Makita) saws. Not sure about world market but here they take a "single D" screwdriver for the high speed carb needle adjustment.
I wanted to ask you guys for advice. I no longer trust my Stihl MC260 as it gave me repetitive problems even after it was repaired by a dealer.
In other words, what chain saw of comparable size would be a good choice for cutting logs into lumber using my method
-------------------------------
Friends, for your convenience I assembled a chronologically arranged list of videos about my efforts in establishing
this log cabin camp in the off-grid remote location of Karelia (All Seasons):
-------------------------------
01 episode - @ (1 season) 2014
02 episode - @ (1 season) 2014
03 episode - @ (1 season) 2014 (not translated)
1 episode - @ (2 season) 2015
2 episode - @ (2 season) 2015
3 episode -@ (3 season) 2016
4 episode -@ (3 season) 2016
5 episode - @ (4 season) 2017
6 episode - @ (4 season) 2017
7 episode - @ (5 season) 2018
8 episode - @ (6 season) 2019
9 episode - @ (6 season) 2019
10 episode- @ (6 season) 2019
--------------------------------
My Patreon page: @t
You are great on that scooter lol lol lol
Husqvarna every time, and good two stroke oil at 50 to 1. Never add more oil, more oil = weak mixture = runs hot and increases wear. Steer clear of any 2 stroke with oil metering.
Maybe one of those competitive chainsaws, with a V8 engine 😂 ... Love your videos. Huge respect for your Work! .. greetings from Denmark. 😀
For heavy work load I've been using the same Stihl MS 660 for almost 10 years with only minimal repairs. However, it is a considerably larger saw.
*P.S., If you want to get away from Stihl you might try Husqvarna. I have a 480 CD that's over 30 years old, although it's worn out it still runs.
I have a couple Stihl saws but the one that most impressed is the huztl /holzforrma 372 I run a 41in bar on it and it has plenty of power and is cheap and been very reliable for me
You're a genius, Advoko! I used your method and in an afternoon practicing, I was able to cut perfectly straight oak boards 3cm thick and 3.3 metres long, from a fallen tree just using my stihl MSA 220 battery chainsaw. It's all about relaxing, and repeating the swinging technique. It's counter intuitive, but it works like magic!
Великолепно 🎉. Даже ваша пила справилась с распиловкой вдоль волокон. Вы использовали цепь, заточенную под 10 градусов?
Wow, impressed you were able to do this with a battery powered device. Which saw, and how long did the battery last you?
I was running this saw for about 2 hours at about a 30-50% duty cycle ruclips.net/user/postUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
It takes years to acquire simple wisdom. Powerful words right there.
Well Said👍🏼👍🏼👍🏼
Hey
Intuitive and natural solutions come with repetition and being mindful of productivity. Safety first, ergonomic technique second, and productivity for the end customer third. It's taken me over 20 years to learn that.
I agree! I thought the "beam machine" I used in my cabin video was simple, but this is awesome!
@@jacobbeaty2869 98
You got a like just for hauling that wood out on that scooter. Respect.
I'm super impressed. I never would have thought such results were possible without a sawmill attachment. You prove your cleverness once again!
did this 4 years ago. i just snapped a chalk line. it is surprising how easy it is to hold it vertical.
I find it easier to cut of the edge with a "beam machine" especially with curvy logs. What advoko does works well but only on good straight uniform logs for me
Do not cut slabs like that, not enough load on the saw. You'll end up burning it, like he did.
Humans have been cutting straight boards for thousands of years using just saws and no jigs;) the industrial revolution unfortunately has made us forget a lot of these genius techniques....
@@em4703 running low rpm little or no load,why it will burn?
Oh man, you just saved me quite a lot of money - now I'm definitely NOT buying any attachments or chainsaw sawmills. I'm rather investing the time to master this technique of yours! Thanks for this video
Hows going your technics ? 😀
"It takes years to acquire simple wisdom."
I had to pause for a second when I heard him say that. If that's all anyone takes away from this video, you're ahead of the game.
I should add I cut a couple logs in half, and had to use a draw knife to try to even out the result, plus I didn't use a plumb line. So, lesson learned.
But anyway: I accomplished several small projects this summer, mostly thanks to watching videos like yours, Survival Russia, and several other smaller bushcraft channels and various wood-working (finnish, norwegian, baltic cabin/wood working tutorials) videos. So thanks for that!
It takes years for me to find this video before doing my cutting project. Thanks BRO!
@@DerMeister821 check Mr. Chickadee too.
@@grizzlyaddams3606 yep, found his channel as well, pretty skilled guy.
@@grizzlyaddams3606 awesome name... Takes me back to when I was a wee lad.... almost half a century ago...😁
Dude you are a fine example of a human being. Love your work and shared wisdom!
Before I knew chainsaw milling was even possible, I was speaking to a local farmer around here who runs a small shop out of a wooden hut he constructed himself out of thin, smooth but irregular self-milled planks. When I asked how he built the thing, he told me he used a chainsaw. Blown away, I asked what kind of tech he used to pull it off. He told me "I used some pretty advanced equipment...you ever heard of a 2x4?" For years, his response eluded me. Now I think I finally understand what he was getting at. Can't wait to try it. Thank you for sharing your wisdom!!
Hands down, this is the single most helpful chainsaw tutorial I have seen for felled trees. Came to the same conclusion on Alaskan mills and milling attachments, and have been relying on a ruler and chalk line for about a year. The swinging motion and limiting the number of teeth that come in contact with the wood has tripled my production, but not fuel usage. I just slabbed an 2 meter section of 45cm walnut - each slice took about 5 mins and maybe 1/4 tank of fuel with a Stihl MS271.
Wow, this kind of quality content made me feel that the internet is truly becoming a restorative force for human lifestyle on the planet
Yeah
It does seem RUclips is maturing and the sharing and learning community is rising to the top, especially when the algorithm has dialed in the kinds of things you would naturally fit your interests.
Also, the technique actually works even if you are a novice like me.
Great video. I have access to lots of eastern red cedar logs. I was thinking about the hassle of purchasing a chainsaw mill and then I watched your video. I followed your instructions and my very first log turned out beautifully. Letting the saw cut the way it wants saves time, fuel, wear and tear on the machine and yourself. You are a great teacher. Thank you for sharing your secrets instead of selling them. You have gained much respect by many. God bless you and your family.
Worked wonderfully for me as well on the first try. I was stunned to see a nearly perfect board cut.
This is an immensely useful and insightful guide to making primitive lumber squarely. Once again, I am reaffirmed in my suspicions that this is some of the finest content on the internet. Thank you for your time.
I gotta say l think you're right mate, there's that thing about practical demonstration using tools and methods most everybody can relate to that makes these videos so watchable
G
I wish some other youtubers would try this method to validate it.
@@AnEvolvingApe I'm not a RUclipsr but l am a furniture maker, I tried it and it works for me
It works surprisingly well. Also, you don’t have to gear up with a bunch of new shit to find out for yourself.
I love it when you put two logs on the scooter, lol lol lol
Yeah the flintstones. That brings back memories. ..
I wonder how many he could get on, before the inevitable happened. P.M.S.L. LOL LOL🤣🤣🤣😂😂😂👌✌🤟🤘🙈
pretty danm impressive.
And rides easily.
lol lol lol nice
Yes it was very third world kind of innovative.
I applied your concepts and with a little practice, I am convinced this is the absolute best chainsaw milling video on youtube. Chain stays sharp 10 times longer. I would suggest novices watch bucking billie ray’s videos on chain sharpening and make sure to use your gauge for guides so cuts stay nice and straight.
Thank you for the feedback on the milling technique!
These guys are better
ruclips.net/video/lBifLlfQXho/видео.html&ab_channel=BlindOwlOutdoors
ruclips.net/video/MTIDt_dafVE/видео.html&ab_channel=LadyfarmerthinksBIG
ruclips.net/video/_I0gY7aTfoU/видео.html&ab_channel=Zaleroseinthecountryside
@@rap3208 yeah but, Advoko Makes explains it better, he actually explains the "why" and the "how." if you presented to me those three videos of cutting the lumber I would have thought "wow that's impressive" but then I would think also "I wonder how the hell even do that?"
the author makes their videos make sense. And yes, maybe they are executing better because they discovered the technique themselves and maybe they've had much more execution-experince but it does not discount the value of this particular video.
Surely you can agree with the basic comparison that we're making here right?
Much respect for your work ethic and approaches to problem solving. Every aspect of this video appealed to my artist-engineer- outdoorsman brain. Well worth the watch. Subscription earned.
Much Respect .
👆
"If I had two hours to chop down a tree, I would spend one hour sharpening the blade" -Abraham Lincoln...thank you for sharing this information, I am very impressed...
Ronald, thank you for the great quote!
The time got me thinking so I looked it up, it's not an Abraham Lincoln quote but from an anonymous woodworker in 1956 (and he was talking minutes not hours) To Cut Down a Tree in Five Minutes Spend Three Minutes Sharpening Your Axe. :-) But the message is clear, even clearer without Abe's name.
@@nelisdrums9024 thats too bad ... I thought I had found my favorite abe quote.... 😥
@@Advoko
Karen or bust movie
Not bad considering you take hours to prepare a delicious meal, and people eat it in minutes..
I tried this method after seeing it in one of your videos on your other channel. I cut a massive elm log into slabs. It was so thick I had to roll it over half way through and cut from the other side. This method is so good, I was able to connect my cuts in the middle of the log. In all fairness, I was cutting very thick slabs and I had to do a bit of resurfacing, but still, a very good method.
John, I am so glad the method worked well for you! Appreciate you feedback!
Yes, I published this video on my main channel a while ago...
@@Advoko Keep up the great videos. I learn something every time!
I bent so many bars trying this technique
Any tips for helping me with this
@@rufushowe3885 A really sharp chain is important. Also, I should say, that my cuts widened out a bit more than his. I think this might help to keep the chain from binding. It was also my first attempt, so I could be totally wrong.
I could watch this guy's videos all day long.. I'd love to spend a summer with him learning his tricks and trades
I tried this and it works very well. I even tried forcing it to make it cut a little faster, but the cut was no longer straight. You saved me a chainsaw mill! Thank you!
You are a genius -- I get that feeling when watching your videos. I'm a very experienced woodworker/carpenter and highly educated in quite a few subjects but I feel I could learn so much from you, as I already have just from watching your videos. Thank you so much for sharing your knowledge, experience, and wisdom. You have one of the best channels on RUclips.
PS. I'm going to try this method.
!... Thank you!
@@Advoko well deserved praise. 👍
This technique is exactly the way I make perfectly (mostly) straight cuts with a diamond blade in concrete. If you bury the blade slowly and with great focus on accuracy you can just relax once your buried and let the natural position of the blade find it's true course. Pushing gently forward and listening to the machine is all that is needed to keep straight along the way.
Love it!
Was thinking the same about cutting stone with diamond carbide as well. Makes total sense.
This also works great with regular old wood and a circular saw, plunge first at one end then let the saw do the work instead of cutting the good old fashioned way- a bit awkward at first but it works very well.
I used to work at a small welding shop, and I was frequently tasked with cutting a compound angle on heavy steel tube using only a grinder with cutoff discs, as our bandsaw wasn't up to the task. I used the same sort of technique, taking great care to begin the cut and then using the initial cut to guide the blade.
I was just cutting concrete slab today for bathroom remodel. I use your same method. True in cutting various materials is also true in life: don't force it.
I never plan on starting a chainsaw. I just like your voice. Years to acquire simple wisdom. Good people watch good videos. Russian and Canadians live in basically same environment. Different languages but a lot of the same traits. Tough independent.
Just want to give you a pro tip on the mill attachment. When using the mill attachment you should put wedges in the cut every 2 or 3 feet to suspend the board off the bar. I love you videos and hope this helps keep up the great work!
Maybe this takes too much time and you have to stop the chainsaw all the time
You remind me of my late father,in that your simple,yet thoughtful approach yields the desired results. Thinking a thing through in order to get something that is otherwise unavailable to the man that's willing to accept the negative. Thanks for reminding me of a forgotten lesson from my Dad
I have been living off-the-grid (OTG) for over 17 years now. I have hand-built-cobbled and duct-taped together all sorts of things. None of them look as good as any of your stuff. I would not presume to give you any advice on anything whatsoever. You, sir, are wasted in law. Huge respect.
Came for the board cutting, stayed for the log moped
I stay too ending up being Mopped
Same . I was like “holy shit “
Haha..!
Ingenuity is ingenious
Same
This is the same chainsaw that I became so frustrated with that one day on the way home from my farm, I pulled over on the side of the road, reached into the back of the truck, set the chainsaw on the shoulder of the highway, and drove to the nearest Echo dealership where I purchased the CS-590 that I've had for the last five years. I hear people say all the time that Stihl makes a great saw, but that wasn't my experience.
Great advice on that. Your process there gave me an idea on how to field mill short logs, too, Max. One day when I get around to making it, I'll send you some pictures. Thanks so much for all of this and take care!
I wasn't to sure about this guy in the beginning of the video, but absolutely convinced this man is a craftsman by the end. Thank you for sharing some quality knowledge.
I tried out your technique today and it worked! Amazingly easy. I have been struggling with an alaskan style mill which even with a brand new chain was hard work, very hard on the motor and the chain blunted very quickly. I use an old Stihl 038 farmboss 66cc with a standard chain. Your method was much easier, less wearing on me and the machine and a lot quicker. I wore a lumbar support for my back, which I would definitely recommend. I actually enjoyed the process. It is strangely rewarding. Thank you for sharing this awesome technique and if anyone is not sure, give it a try. It doesn't need huge amounts of skill, the cut seems to make itself straight. Brilliant 👍😁
I appreciate you writing back to me! Glad this log cutting technique worked for you!
Being a woman and homesteading is hard enough but building a cabin by myself has seemed like an impossibly hard project. You have changed my outlook! Your log cutting technique is going to save me a lot of time and money. Now I can't wait to get started! Thank you for sharing!!
Kelly, there were quite a few of first-time success stories with this technique under this video. One guy even sent a video link. I hope it works out for you too.
How's things going? :)
I finally got to try your method with 372xp 50cm bar
Absolutely incredible. It's like boards out of thin air. Thank you so much!!!
Beautiful lesson my friend!
I always love that the best tool for something is no tool but brain and heart 🫶
Just finished splitting a 35 inch wide log this way. Thank you for this advise, I reviewed several complicated ways (Alaskan Mill, etc) prior to this video, but you nailed it with your two simple secrets. Спасибо земляк!
hahaha! To hell with the cutting method, let's talk about that fancy log moving scooter! Happy to have found your channel comrade!
Logical, practical, and good advice. You trust the guide that takes you into an unknown forest so trust the guide that comes with the saw. Logic. Good video, keep em coming. 👍👍
I do not know how hard you have it in Russia, but you have proven that when a person uses their mind they can just about achieve anything! Unfortunately I'm scared that people are loosing the ability to think outside of the box anymore in which you have proven that you are a master at! I'm super impressed to say the least!!! I hope that people in other countries can and will learn to do things that are often seen as impossible! Thank you very much for your video!!!
well said....
Its hard to develop outside the box thinking when all your life is inside the box. Living in germany you simply don't get to experiment with the real fun stuff and the little experimenting you can do is expensive.
Excellent! This is exactly what I was waiting for. I am interested in starting to mill my own lumber. I like the method you have come up with for sawing straight boards. I also like that you went through all the pain of trying different jigs to come to the conclusion of this swinging method instead of me. Meaning, I am glad to learn from your experience. I'm anxious to see your progress with drying methods now. Thanks for sharing this, and I will stay tuned.
I thought the wooded beardsman dragging a log with a Suzuki with the roof cut off was the craziest thing I had seen. This guy just strapped 2 to a scooter! Lmao! That's awesome
Useful technique but the double battering ram motorbike was most impressive!
Advoko
One of the best dam videos on rough cut logs, lumber I have seen. Your are totally correct sir, your methods make cutting those logs easy. I have been using the Alaska mill for years and kept buying bigger saws to mill through that thick lumber.
I think you could get a smaller saw to swing easier. I have been using a Husqvarna 372 and 394 on the Alaska mill, but those saws are too heavy for swinging with a heavy bar. So I pulled out my old Husky 450 and I had great results swinging vertically with a sharp ripping chain. Took me less than half the time to cut the log with your methods than the Alaska mill going horizontal and running all those saw teeth contacting the wood.
Thanks for your simple and effective method.
Thank you for your feedback! Always good to hear that your life hack worked for someone else...
Advoko, and Mr. 65895555, when using Advoko's method of vertical free hand milling with the swinging motion and just using the tip of the bar and chain, what kind of chain have you found works best? Skip tooth or full chisel? Advoko mentioned filing to 5 to 10 degree angle on the cutting tooth. Or is there a specific milling chain that works best for this method?
By the way, thanks for your awesome advice and greetings from northern Minnesota.
You are really a genius. I am blown away by your calm approach to every obstacle. Well done! Keep up doing the great work.
I don't own a chainsaw. I don't cut the trees let alone make my own lumber, but I have carefully watched your video which is almost hypnotic, and I cannot remember the last time I did it with so much attention. Excellent work !
My mentor told me to trust the tool and let it do the cutting, you're just the guide. Center yourself repeat your movements like a machine and it will do what you want it to do.
I liked your portable steel mill. I've thought of this exact thing, you're experience helps me see what I can expect if I were to build one. Thank you sir.
Excellent offering here thank you! Just recently I am back on my chain saw for all things at my home and was out of need having to cut an old poplar log this way. You are correct as the motion or swinging action with sharp chain creates the vertical cut, then repeat until quality is obtained. I am bulding a seated carving bench/sculptor's vise. From western Canada stay warm this winter!
Many decades ago, I stumbled on the same technique and found that it is very important to have level and unobstructed ground to operate from while doing this. Obstacles and uneven ground make walking backwards awkward-and uneven cutting the result. Loveya, bro. We live in the same world. I have lived in the Alaskan bush for well over 50 years, and TRULY feel closer to you than I do the people in Anchorage. I don't care what government is over us, our lives are the same. Wish we could meet.
I have learned much from you, but I'm too old for this stuff. I'll pass it on to grandkids.
Alan, thank you for the story
Ahhhh, if only. My chainsaw skills, even 40 years ago when I was young and strong as a bull, were never good enough to get this type of straight cut. I would watch in amazement as my older (read, senior) friends would take a 30" thick mesquite log and cut it into 4" slabs freehand. Anytime I tried a cut like that, it looked like a wavy potato chip. Great video. You clearly have gifts! The ability to make awesome, watchable, instructional videos, and the ability to cut logs like that!
Jason, thank you for your kind words)))
Tried , tested and true 👍 👌, never failed me over 33yrs of cutting and machining my own lumber, carbide chain is the next best thing 👌
Thank you for the feedback on this lumbering technique!
Dear Sir,
You are highly adept at bush craft skills & you equally think in scientific terms when it comes to cutting efficiency. Not only is your cutting technique very good but yields an excellent result as a far more economical method compared to all these chainsaws kits made for cutting tree logs slabs. You understand very well the limitations of chainsaws & how best to exploit their power in a much simpler alternative. Very well done. Kind regards.
Absolutely riveting! I'm going to do this myself. So beautiful, the craftsmanship in this video
Discovered this video by chance as a friend is seeking help in such building methods. I have run a MS260 for a decade that has cut down and bucked at least 50 cord of firewood plus trail cutting and with the exception of one carb kit it has never let me down even during the hardest use. I have only used a 16 inch bar so as to better fit on my quad. Thank you for such an informative video. Regards from BC Canada 🇨🇦
Thank you thank you !!!!!
Best method by far! I tried it on a 1 year old oak trunk, with a Shindawa 55 g engine and a Lidl Parkside one of same engine (small and light to handle), bar was relatively standard size for such engine. This made the whole difference as, using a smaller chainsaw meant more stable movements and much less tiring on the arms. Made 3 cuts in an hour and half (first tests so we took it easy and had breaks)... Now I am super happy !!!
Defo needs practice to move down and straight but, no competition . This is the best method. Thank you again !
You should narrate documentary films, you just have that kind of voice. Nice video
Consider a Husqvarna "Rancher 460" with a 24" bar. I've used Husqvarna chainsaws since the 1980s, and have always found them to be the best. I tried Stihl, McCullough, and Poulen, and found them all to be inferior to Husqvarna.
A good many people swear by Stihl, but I'll take a Husqvarna over a Stihl, any day of the week. Husqvarna tend to be less expensive, and generally offer "more saw" at the same price point of a Stihl. For example, on average, $500 gets you 60cc Husqvarna with a 24" bar, and a 50cc Stihl with a 20" bar.
If yall think I've "bumped my head", or I'm "smoking something", please chime in. I'd love to hear your opinions.
Great video! Thanks for the lesson.
P.S. You might seriously consider spending the $75 on a full face shield, and hard hat. Safety glasses are great for flying splinters, et al. But I can tell you from personal experience, that if it weren't for "company policy" requiring us to wear full face protection on the job running our saws, I'd either be sitting here missing my vision in one eye, along with half a face, and some nasty scarred over stitch work. Or not here at all. Although it's fairly rare, "bar kick back" can, and does happen. And when it does, it's instant, and can be brutally violent. In my case, I hit a strand of barb wire that had been grown over and concealed inside a tree I was clearing. Chain brake bar worked, but only milliseconds AFTER the chain at the top front edge of the bar slammed into my face shield.
Thank you for your advice! I actually bought a Husqvarna 365 chainsaw recently. It was working as a champ so far...
I run Husqvarna myself and couldn't agree more. I used to cut firewood for part of my income, and used Stihl saws. Both of my Stihls were broke and borrowed a rancher 460. After a week I decided Husqvarna was the way to go
I love my husky 60 , I put a 28inch bar on it so you don't have to bend down to do grub work, can reach the ground standing up
Thank you for the safety reminder
Max I thought this was to good to be true. I used it this year getting firewood and found that it really works just as you said it did. THANK YOU!!
Moving the logs with the scooter was EPIC! Dude, you just made my day!
For anyone wondering this technique of the swinging motion absolutely works. I am a complete novice with a chainsaw - probably used one for 2 years to cut and buck dead trees and storm blown trees. I wanted to create a bench out of a nice oak tree that has blown over. I used this swinging method and it was far easier than any other method I tried.
Ted, thank you for your feedback on the technique.
Worked great for me too
Cheers from Alaska
Thank you MaxEgorov! I learned a new technique which I will try in the coming weeks. My chainsaw is a Husqvarna 445 with an 18" (45cm) bar. It usually cuts very well with a sharp chain on most types of logs. We have plenty of forests & trees to work with here in Sweden, so it won't be long before I get to try your technique.
Crazy coincidence; This morning never seeing this method, I used it on some beautiful red cedar logs and was surprised by the accuracy. Not the best, but pretty good. I am sure it will be better next time using a bit more care as I proceed through the log. And the best tip you gave, obviously is a properly sharpened chain.
I remember watching one of your other videos, thinking you had to be bringing in supplies from outside because there's no way you could cut it that straight with just a chainsaw but you have proved me wrong. Great information!
Just saw this video and wanted to say thank you for the insight. I'm now working on a way to modify my chainsaw mill to allow the tip to sweep the log from side to side while advancing instead of using the length of the bar to make the cut. Wouldn't have thought of this without your video. Greatly appreciated!!
Amazing, your technique sounds like it shouldn't work yet you proved it by showing us in the video.
I think you have saved lots of people extra work by sharing your secrets, thanks! 🙏
The power of the ROOS!! Superbly spoken English as well. Kudos brother!
Only one video a month is good as the quality matters!
And to be honest, u are a great teacher
It's good to see a guy in the woods that knows his saw well. Take care, buddy
Your chainsaw video was one of the best I've seen on RUclips! You remind me of the old "tie hacks" who used to square railroad ties with an adz, walking from one end to the other with the adz cutting less than an inch from their feet. You are skilled and thoughtful!
This is great for a man like me that has a Forrest full of trees and a pocket full of dust,thank you
Dude! From Russia With Love!
Phenomenal video!
Thank you.
I couldn’t stop watching, right until the end.
Well done...perfect timing to help me as I have my first 3 logs to mill into lumber for an outdoor kitchen and also for a woodworker's bench. Your recommendation of using the tip of the blade to reduce friction perfectly solves the problem I had when I started. Thanks brother!
It's really good to watch truly motivated folk, I am sitting down at the moment have fun.
These are MAGNIFICENT boards! Wow! Great job!
Watching you transporting it on a scooter was hilarious 😂
I tried something similar to this method:
I used a $25 attachment that holds the chainsaw perpendicular to a 2x6. I made multiple passes, cutting 1" each time. When I got to 8" deep, I removed the attachment and cut the rest freehand.
It worked!
Bravo!
I just tried it again...and not for the first time...on Ash. Quite a good result...and like Max says "your work doesn't stand still".
Thank you so much for this amazing technique! I live on a timber farm and this has changed my life! Great guide and works flawlessly and efficiently after a little practice. I am using a Stihl MS382 with a ripping chain on a 50cm bar which works extremely well. Thank you once again you have really amazing content please keep it coming!
So glad to hear the technique worked for you!
I have cut a lot of wood in my life but have never seen this done, I'm impressed👍👍
watching you ride the scooter with the log pieces on it was awesome
This is an awesome, well explained and professionally made video for anyone that is interested in cutting logs into slabs. I build log homes and run an older lumbermate2000 sawmill but at the moment do not have access to it because of snow. I need to cut an oak log for personal use and was planning to cut it free hand, after watching your video, I will try your techniques and have the confidence that it will turn out the way I hope. Thanks for taking the time to share your ideas, tips and craftsmanship with people that truly appreciate someone like yourself that takes the time to be a sharing and giver of knowledge. Thanks, stay safe and happy cutting.
Absolutely everytime I watch a video produced by you I learn an invaluable technique or method. You sir are a handyman genius
Let me say that again a handyman genius!!!! . Everytime I run into a difficult situation or problem my wife ( Bless her) always says did you check Advoko to see if you had posted anything remote to my situation or problem, so you my friend are getting too close of a relationship with my wife. Lol thanks for another great video!!
Brian, thank you for your kind words!
Outstanding.
This sounds like an excellent method of cutting a large log with a small saw, kudos!
I tried your method of cutting some red cedar logs into lumber
I picked up the technique right away since I already had 24 years of experience running a chainsaw
Your method WORKS EXTREMELY WELL
Thank you for the tip
I've been cutting lumber like this for several years,you are the 1st I've seen to do the same.I use my older Stihl 041 and Husky 65l they are heavy but seem to handle it better than my other saws,I have a Husky 365 special that does well and is fairly light but I use it to fell trees mostly so don't want to lose it for that reason,I've recently bought a Husky 77l that I'm going to try soon just have not had time yet!Nice video
Glad to hear someone else came to the same conclusion!
"it takes years to acquire simple wisdom." Socrates couldn't have said it better.
Truth
@@MikeSmith-gv2wx ruclips.net/video/dAyrhuBlM0g/видео.html
The wisdom of those who work with their hands often surpasses the wisdom of those whose who sit on their ass.
@@daninfrance2892 amen.
You are nothing short of an amazing man I much appreciated your perfection and step by step guidance British Columbia Canada cheers
British Columbia!...
Cheers from the Yukon
I'm blown away by these videos... Just amazing Max.
Many months since my last comment, we’ve learned a lot about the Alaska mill since then. I have a MS661 and do not regret holding a heavy saw. Go big.
Straighter planks than the ones your get from the front of the rack in Home Depot
Haha
17Industries 🤣🤣🤣🤣🤣🤣good one
@Ordinary Pete did she let you buy a chainsaw?
Lol
17, that ain't no joke there!!! Seems they like selling to boat makers!!!🤔😅
Wow, am going to try your method. Had not seen the bushcraft saw holder - that is cool! Thanks for your video. Cheers from Occupied America!
After building simple "chainsaw mill" and almost killing my Stihl after cutting single log I found your video. Man, this is awesome. I tried your method and I love it. First boards were not "perfect" at all, but pretty enough for outdoor bench I was about to make. And I can see that with more practice this can only get better. Me and my chainsaw are grateful ;) Greets from Poland.
Glad you hear you were successful with this milling technique! Best
VERY impressed with your english. I know people who have lived here in the US for decades that can't speak as good english. Pete
When I saw the scooter with the logs, I clicked SUBSCRIBE! This is a man of great value
I actually did this this weekend the results were promising! I was on a steep incline but still managed to get a flush cut. I cut through a 20 red oak that had fallen across one of my trail. The property is very steep but I made 3 cuts about 10 foot in length. I used about 2-1/2 tanks of gas to complete the 3 cuts. I had to borrow my neighbors saw in order to get the final 2 inches as my 18" still ms250 was just shy. However using the lighter saw for the majority of the work was very helpful. Thank you so much for this video! Also I was inspired by the moped. I strapped my to the side of the atv and it drove unhindered by the weight.
👍
@@Advoko, what were you doing with the three planks at videos end, with sawdust between them and a tarp to cover? What was the purpose of that?
Wow! I wish I had learned these things years ago! Thank you for posting these harvests from your experience!
There are some people who have extraordinary skills and vision, like this man....,then there is me.
Hey Max, greetings from NY! Great video and I am sharing it with my brother who thinks he has to get a sawmill? After seeing you, he’ll know you are the HUMAN SAWMILL! Awesome skilled and thank you for sharing your knowledge with us around the world. I hope you are well with all of the madness going in the world and stay safe! Best regards
Wow, hat off, I'm blown how straight that cut was! Challenge accepted, I need to try that this weekend! :)
Tried your technique today and it really works like a charm. Just trusting that the tip of the saw goes streight. Excellent. Thanks and keep up the great work work...
Clever. Very clever. And: you show that it possible without all these "sawmill"-things! Thank you for sharing your experience!!
Try Husksavarna saws
Sharpness is a very important thing to maintain when using any cutting tools. Every so often I’ll be working on something and as the tool dulls I end up leaning harder on it or w/e and I really had to train myself to recognize these situations faster and instead of fighting with it, you take the ten or so minutes and go sharpen it. You might think it’ll take longer than if you just lean on it and force it (cuz you’re almost there!) but actually you’ll find to stop and go sharpen the tool, even though it takes some time will get the job done faster overall, not to mention you don’t have to fight with it, you won’t break the tool and ultimately you’re just being a better tradesman.
Max, everyone else is going to recommend you get a husqvarna or stihl, I am not everyone else. Looking at the piston of that saw its clear it failed due to *overheating*, that MS260 is not powerful enough for the job you're trying to do and nearly all new saws are designed to run very lean for emissions etc. You need an older design saw and I'm going to suggest a Makita (Dolmar), you could get the DCS6400/6401 or DCS7301. Also these should be cheaper than the other brands. You should run the best quality 2 stroke oil (not husqvarna/stihl) at a slightly higher ratio like 42-45:1, I recommend Motul 800 2T Off-road, it should be available in your country. yes its marketed for motorcycles but it's arguably one the best one you could use, many people use it for chainsaw in Australia and USA. It is more expensive yes but a new chainsaw costs more.
I'm in Australia and I have many years experience in maintaining and running saws, i have husqvarna, stihl, echo, makita, Dolmar.
I have looked these up for you :
makita.ru/catalog/model/240.html
www.motul.com/ru/ru/products/800-2t-factory-line-off-road--2
Edit: If you can't find a makita you could look for an older husqvarna such as a 359, 365, 372xp. These saws have many spare parts available, I would not recommend smaller saws for your work. Also the Makita 7301 is very similar in power and performance to the Husqvarna 372xp
Thank you very much for your expertise!
Interesting! I like husqvarna and stihl, but i have only used them for forestry work, mainly drop felling and cross cutting, never for milling. I will check out makita next time i plan to get a saw, especially if i will use it for some milling. Thanks
Second the Dolmar 6400. A ripping chain would also help.
Another vote for the Dolmar (Makita) saws. Not sure about world market but here they take a "single D" screwdriver for the high speed carb needle adjustment.
@@65BAJA mine just use a normal small tuning screwdriver