Part 1 Episode 100 Rebuilding an Autolite 4100 or 2100 carburetor Autorestomod
HTML-код
- Опубликовано: 11 окт 2024
- This week we give carburetor tips and tricks while we rebuild Fords venerable 4100 Autolite carb. What we discuss with the 4100 will mostly apply to the Autolite 2100 that saw use in pretty much everything that Ford Motor Company built between 1957 and the late 70's and early 80s. We discuss jets and where to get them as well as tools for safe jet removal and installation.
Thanks for watching!
Sponsor:
www.nationalpar...
Mentions:
www.nationalpar...
www.allcarbs.com
www.summitracin...
![Clave Especial x Fuerza Regida - No Pasa Nada [Official Video]](http://i.ytimg.com/vi/3u2jaju71IQ/mqdefault.jpg)
Just finished rebuilding the 2100 on my wife’s 66. Because of your video...this went smoothly and it runs for the first time in 20 years. Thank you
Glad!
Got it. Cheapest thing to do is the 2100; be sure to get the lit like the one that NPD sells. That 2100 will perform well on the 289 or 302. 600 cfm on a non performance 289 (or 302) is a lot of carburetor. As long as the 2100 is the original 2V with the car, you will get decent performance.
The weatherstrip adhesive is more to keep the diaphragm from collapsing into the carb.
Thanks Guys, just came into possession of a 64 Fairlane, your vids are helping alot. Looking forward to getting this Car on the road again.
Stainless screws are an excellent idea Aaron, but we're not sure where to get the correct ones for the carb. We just like the properties of weatherstrip adhesive. plus it was on hand! =)
If you go 4V the 1.08 venturi Autolite is hard to beat used rebuilt examples are around $450. As long as you are not hung up on the carburetor being "correct" the Galaxie carb we used (also a 1.08) will offer excellent performance.
Nate we only ask one thing of our viewers...spread the word! The more viewers we get the more (larger) projects we'll tackle...
We have places like Fastenal which are great if you want to buy 500 or 1,000 screws and washers. We haven't seen these particular fasteners at the big box stores like Lowe's or Home Depot; and the only other bolt store that doesn't bulk sell is 30 miles from our base of operations.
Thanks for making this video and showing the parts laid out in an organized manner. Most RUclips videos involve poor lighting and some guy working on his bench that is cluttered.
Man I watch your show religiously lol, keep up the great work You've helped me through many projects and for that I thank you!
This is a good one guys, thanks a bunch. I need to decide between 2100 and Holley 4 barrel for my '66.
We missed the arm install on video, sorry.Yes the pin on the diaphragm does fit in the hole on the plastic arm.
going to dive into one of these, thanks for the great video
You are welcome.
Thank you gentlemen
We know, these kids today; makes us shake our heads in disbelief...
I get the impression that it's a little different in the US than Canada. Here, there are plenty of fastener stores which carry everything a person could want. I can get stainless versions of really any fastener. However I've also noticed that people in the US seem to have trouble finding hardware, so do you not have these stores?
😎👍
That sucks. Within a 10 minute drive from my hours are 3 fastener stores which are happy to sell over the counter in small quantities. Unrelated, but AutoRestoMod made a small guest appearance on my latest Cosmo video.
Are there differences in float adjustments and why? Reason for asking is that I am using a 4100 on a motor (351w) on a vehicle that did not use a 4100. Also, why does motors manual say fuel pressure for vehicles that use a 4100 is 7 lbs but my carb rebuilder says that I need no more than 4 to 5 lbs?
Yeah... $450 is way outside of the budget lol. I have a Holley 600CFM that I would rebuild myself, or rebuild the Autolite 2100 I already have. Those are the options that I can afford :)
Coulda used a short piece of safety wire to hold that white plastic lever thingie in place instead of the glue. YFB
Damn hipsters, bringing a chainsaw to a party!
Good video. I'm less scared of carburetors after watching it.
Instead of painting the screws, and why not use stainless steel? And why not gasket tack instead of weather strip adhesive?
Gasket tack is just glue spray adhesive to hold gaskets in place.
Is this a tv show? There seems to be a lot of effort put into it.
Thanks for noticing. No, we are strictly RUclips.
Hello, what do you mean with front and back of the carburetor? primary/secondary? if i'm right the secondary jets are larger than the primary jets.
+Melissa & Patrik Schöni Yes, primary and secondary=front and back. Usually the secondary jets are larger.
+AutoRestoMod thank you very much! Your video is so helpfull! Regards from switzerland!
COOL! Aaron does awesome, detailed videos for Mazda lovers, go check him out.
Anyone know where I can get a power valve assembly for the Autolite 4300?
quadrajetparts.com or www.carburetor-parts.com/