Oil Pump Replacement On A Husqvarna 562xp Chainsaw - Fix A Non Oiling Bar & Chain!
HTML-код
- Опубликовано: 9 фев 2025
- Oil Pump Replacement On A Husqvarna 562xp Chainsaw - Fix A Non Oiling Bar & Chain!
This procedure will be similar on other Husqvarna chainsaws. As always, I get straight to the point on how to repair it!
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Tecumseh, Dolmar, Makita, Poulan, Ariens, Briggs and Stratton, Murray, John Deere, Craftsman, MTD, AYP, etc.
Oil pump is part number; 505 19 99-06
Air filter is part number; 522 67 50-01
Help me make videos or buy me a beer!!
/ donyboy73
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: / donyboy73-the-small-en...
Twitter: / donyboy73
Instagram: / donyboy73
If you enjoy my videos make sure to comment, share, thumbs up and subscribe. Thanks for watching!
Easy to follow and thorough step by step tutorials do it yourself (DIY) to help you with your broken lawn and garden equipment including snowblowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed wacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on RUclips and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on RUclips to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor".
#donyboy73 #db73 #husqvarna
Where can I find some of these common cents you so often suggest we use? 😀
Thanks for all the great content Donyboy!
lol👍
You mean common sense. Cents means currency (money).
...and the stars aligned.
@@andybecker2693 cents would be good too!
@@donyboy73 Thanks., your channel is very well done and I’m a superfan . Thanks for everything that you do!
So well explained and so easy to follow. Thanks, well done.
A great step by step mate..
I agree!
Nothing like starting a Friday with a great chainsaw repair video! Awesome video!
Good video, Donyboy73. It's Canada. The chainsaw is so common it might as well be on the $1 coin, and primary education could include disassembly and reassembly of gas chainsaws.
Great job on this one!! I was just given a 562XP got it running and now I need to do the oil pump!!!
They are notorious for this problem!
Sometimes I forget how great Donyboy's video really are. Perfect instructions and presentation. Thanks
Every Friday morning I look forward to watching your video thank you for sharing with me
have a great weekend!
I can't figure out the dislikes ...? This guy is really knowledgeable, I watch his videos all the time when working on various machines
Those are sure a great saw. Thanks for making it look easy Don.
I love those things...
Thanks 👍
Exelente demostracion en como reemplazar the oil pump. Muy buenos consejos. Muchas gracias.
Didn´t know how to replace a oil pump, but now I do! Greetings from the Netherlands.
greetings from Canada, I was in the Netherlands in 2000 for SAIL 2000
I just recently found ur channel and it has been a great help. Thank you for your easy to follow style and good explanations.
Je tiens à vous féliciter pour vos démonstrations et commentaires de très grande qualité...
Excellent step-by-step directions. Thanks so much Don!
thanks for sharing this - have done it before but forgot the process - saw now bakc up and running..., worn worm gear.
Thank you dony , for your hard work and dedication for making these videos , and teaching us how to maintain and repair our power equipment . God bless you sir .
You bet
That was an excellent video! Thanks for making it! Liked and subscribed.
Love your tutorials
This is a great video. Thank you sir.
Awesome step by step tutorial
You're #1 of a FEW I subscribe to Don, you've saved me hundred$ with your excellent instructions. Probably millions if you added us all up...-J
have a good weekend Jason!
Awesome step by step instruction Don this is very helpful bud thanks 🙏 for sharing and have a great 👍 weekend 😀😀
Excellent video, stay warm.
great instruction video, could you do a vid on installing the updated air filter for the 562 xp
I have learned so much from your informative videos. Very well explain step by step. 👍👍👍👍
Very instructive video. Thanks for posting.
Great how to Information Danny thank you
Great tip with the rope Donny!
Thanks 👍
Very good video. Thank you a lot
Great video
Thanks for the details
Wow that was actually fairly easy unlike some chainsaws where you have to totally disassemble them.
Enjoy your videos great job as always
Outstanding instructional video!
Great job on this matter young man
Good Job mate 👍.
I like watching your videos 🤠. Have a good wekent.
thanks, you too
Great buddy I like your all videos your all videos is easy understanding
Glad to hear that
Really. good video Dony
Glad you enjoyed it
Great info
been a long time since you had a good video! 👏
Great information. I’m having the same issue with my Husqvarna 460 Rancher..... Thank you
good job
Thanks
Thank you Thank you Thank you!
Nice job 👍
Hi donyboy73!!! Once again, great video, thanks.
Now, i game up with an idea couple days ago, and i told it to Bruce Pender, i also want to tell it another great canadian, you sir. For the next Halloween, if you got a useless old 3 hp Briggs engine from the 60's or 70's. You spray it orange, remove the flywheel and then you but the candle under the engine cover, and there's your Jack O'Lantern. I've got one blown up engine like that, and i'm gonna try that.
Great job
i wish someday you work on tanaka chainsaw especially the ecs 3500
if i get some come in the shop I will!
great video as always!
Great video very helpful 🇦🇺🤙
Thanks for that friend.
What is it in the pump that goes bad?
so what makes the oil pump fail? is it desighn or neglect? maybe its a heat issue. . i had someone tell me that you want to make sure the chips are always getting away from the saw, becasue of heat.
I have a question on Husqvarna 562xp
Issue: way to much oil to bar?
I even shut off bar oiler screw all the way?
Any ideas?
I had a Husqvarna saw once but every time I tried to use it I'd end up throwing it across the yard because it wouldn't start. Finally I gave it to somebody. I now have a Stihl and it's much better but the best saw I've had was a Mcculloch. Good dependable saw that lasted a long long time.Just saying.Good video Don. I appreciate you!
Interesting...my experience is the opposite. My McCulloch is a PITA and my Husqvarna starts and runs well...I think how much you use it matters. I run the Husqvarna a couple of times a month all year, but the Mac only infrequently.
@@jamesanderton344 The Husqvarna would run all day if you ever got it started. I knew even less about saws then than I do now if that's possible.I'm sure it could have been fixed.
Hi Ron. Like James, I have too have had the opposite experience. Overall, from experience, I think the Swedish saw is better and more reliable than the German saw. My older Jonsered 250C starts on the first pull, runs much smoother (no dancing!), is quieter and more powerful than my newer Stihl MS261. And, as my small engine repair mechanic once related, the Swedish saws have fewer parts to consider than the German saws. Guess it's a matter of preference ie. Ford vs GM vs Chrysler! Enjoy your day guys and thanks to Dony for proving this forum for discussion.
Awesome! 🤘🤘
Is this a common problem on husqvarna 440 x- torque e- series?
Would you happen to have a video where you replace a Husqvarna L77 oiler assembly? I haven't tackled this job because I don't know where to begin replacing the assembly. My old saw is pouring oil when it sits for any length of time, what a mess! Please help if you can. Thanks, Greg
Do you have the part number for the piston stopper for the 562?
Also, after watching this video, I was able to do mine exactly as you did. I just used rope instead of the piston stopper. The one I had was too big for the 562xp. You make all the fixes I have to do on my small equipment easy with your videos! Thanks!
great video ! just one question donyboy73 , why do you prefer the plastic filter over the paper filter ? in my opinion the plastic filter is completely garbage after one day of using the plastic filter my carb air intake was full of shit.. one day !! so i put back my paper filter after i clean it and order another plastic filter thinking it might have been a default one...same exact thing with the second filter.
That black filter is for winter use. It is 80 mic. The flock is the better choice for summer. It blocks finer particles, less dirt ingestion and increased engine life. A recently published service bulletin shows a new type on air filter for improved filtration, can be retrofitted on the older 562xp by installing a new air filter holder and cover kit.
Would changing the oil pump on a 346xp be a similar concept?
similar yes but slightly different, you can do it!
Dony, do you recommend using “winter weight “ oil? Very informative video! Thank You 🙏!
yes absolutely
If you can't find winter weight bar oil, just cut summer weight with a little kerosene. 10% - 20% by volume usually does the trick, depending on brand or viscosity of the oil. Mix it too thin and you'll go through oil too much, not enough kero and you'll slow your oiling down. Just keep an eye on your oil level periodically.
I’m unable to spin my chain freely Like you did in your video could my bar be the wrong size ? Rsn 20”/50cm 1.5mm I’m new to the chain saw world don’t mind the dumb question
Will that piston stop work for most small engines?
yes with the saws with smaller plug hole
@@donyboy73 thanks
Good Morning; DB73, Another how-to fantastic video. Where can I find a DB73 fastener torque chart?🙄 LOL.. Thank you ol Friend😎..
working on it! lol
Dony, thanks for the video. Excellent presentation as alway! Oiler on my Jonsered 250C seems not to be working. Will do your recommended diagnostic tests first, then determine whether I have the confidence and the necessary tools and parts to do the replacement myself. Unfortunately, not being a small engine repair technician, I could easily not recognize any parts that are worn and also need replacement. Good to see someone who knows what he is doing and from there determine the time, effort and skill level required by a novice.
Hey donny, what brand saw do you prefer?
i prefer Stihl for smaller saws and Husqvarna for bigger saws over 50cc
What does a job like this typically cost?
Is there gonna be a video about how to adjust a chainsaw carburetor sometime in the future?
@@crazyman3157, yeah I’m subbed to him. I’d like to see Dony’s way of doing it too
@@nlowry8 same here. I enjoy Dony’s videos, he does a great job of explaining things.
hi Nic, yes I will
@@donyboy73, thx Dony, you the man
What do I do if the worm wheel groves are stripped.
Buy a new one and replace it.
Nice🤘😁👍🇵🇱
hello can i put a longer bar on a stihl ms 180 how long can it max take in soft wood
16" max
@@donyboy73 wich bar can i use for it do you have a stihl code for it with the good chain for it
@@nickwullaert i use oregon bars
@@donyboy73 wich oregon bar you use for it with the good chain thanks for your time
@@nickwullaert the pro bar is 208rndd009, chain is 73exl072g
Where do you get the red bar oil? What brand is it?
called Chain-x here in ontario
Where do I get the tool to remove the clutch drum?
check on ebay, but it's better to get from husqvarna dealer
Would you recomend any other make other than Husqvarna or Stihl?
Dolmar, although they are under-advertised here
@@donyboy73 I just googled them, are they the same machine as Makita?
@@anthonydefreitas6006 yes they are, the problem here is that there are no dealers and getting parts is a pain
DON how you been now you need to do a vid on 050 stihl pump lol /// ps do a vid half french /English we we
Starrett drive punch, not roll pin
😊👍
some times teeth change colo.r feel odd sharping . smells hot smokes or turns bar black.
Sir, I hv Ms 180 Chainsaw but my chainsaw switch is problem wt i do
i would have to see it
Excusame donyboy73 why the mayoria time u used white grease?
i used lithium grease because it stays soft all winter and is also good in summer
Is great explanation thx !!! What brand are you using?specifically?
@@oliverbreanna789 permatex
Oops Donny not Danny
You bought that millwaukee cut off wheel but you don't even use electric tools for removal of parts!! I would at least think you would use a 1/4 drill impact with a 3/8 chuck adapter.
you can but you can damage flywheel key so i try to avoid that
The nuts on the cover are 13mm not inch
👏👍👌🇳🇴
I hope you will consider bringing your channel to Rumble. Our nation is
politically divided and I've decided not to support providers who do
not permit free speech. I don't want to miss your content so please
consider Rumble. I intend to leave Google Feb 1st. I have no affiliation
with Rumble or any other platform.