GRS University: GraverMach AT Basics
HTML-код
- Опубликовано: 15 дек 2024
- GRS University Season 1 Episode 7
Welcome to another episode of GRS University, our bi-weekly show where we show off tools, tips, and tricks of the trade.
Join Molly Licea on this episode as she explains the features of the GraverMach AT! This same video can be used on your GraverMax G8, just without the hand control/Airtact features.
Initial GraverMach AT setup video can be found:
• Hand Engraving & Stone...
You can purchase a GraverMach AT or any of air systems at www.grs.com/br...
If you have suggestions for future videos you would like to see, leave them in the comments below.
We look forward to providing great free content and hope that you can find a takeaway from each video. Thanks for watching!
Just ordered my baby @3:30am. I've been push graving for a year and started having recurring dreams where I had a hand piece and my work improved greatly. I have a few grand riding on this dream and I'm about to make it happen. Thank you for all these videos, I wish there was a third season!
ruclips.net/p/PLtBduaxGC6vwV_pHYeLmsQjSwDKa7rf9S
All the best and hope it works a dream, I’m also going to make a start on engraving journey
How goes your dream?
Probably most long-awaited & necessary video so far. Thank you.
You all prolly dont care but does anybody know of a trick to get back into an Instagram account??
I was stupid forgot the account password. I would love any tricks you can offer me!
Hi Molly
I would love to see a video on the gravermax G8 Basics. And how to use the hand pieces.
Keep them coming , thank you Molly for your time.
Thank you so much for this video. Also, thanks for being not so deathly serious and a little goofy. Very good content.
You are very welcome! Thank you for watching and commenting!
@@Grstools does the grs have a integrated air supply or does it need a separate air supplyer?
The units do not come with an air compressor. We sell air compressor units that come with the required hook ups for the machines.
Hello, do you have a video on the GraverSmith. Lots of issues with vibrating. Thanks
This video shows the quick setup of the classic GraverSmith®: ruclips.net/video/9eE7Xywb8ts/видео.html
Here is the quick setup for the new version: ruclips.net/video/X4OY92p19xc/видео.html
If these videos don't address your issue, we highly recommend calling Greg - our tech support guru. 1-800-835-3519 or 620-343-1084 anytime Monday - Friday, 8 AM - 5 PM CST/CDT. He can often diagnose the problem over the phone!
I would love to see a video on the correct way to connect to your Air compressor and if you need a regulator between the Air Compressor and the unit and if so what would you advise as there is little information on this.
Thanks for the suggestion. Keep an eye out, we might do a video over this topic.
GRS Engraving Systems do not require a regulator between the air compressor and the system, if you are using a typical shop air compressor like the two we sell.
www.grs.com/?post_type=product&s=air+compressor
For just a basic understanding of how to connect your GRS System to an air compressor we suggest the following video for how to set-up a California Air Compressor:
ruclips.net/video/8687LbYT1Ls/видео.html
For additional information feel free to visit us online at: www.grs.com/ or give us a call: 800-835-3519 or 620-343-1084 to speak with a sales associate who can answer your questions in more detail.
Thanks for the question and suggestion! Best wishes on your next project!
I found a video when i typed in [grs California air to grs mach 8 video] it suggest 50psi but maybe a better video of the hookup could be made
@@Grstools Is there a representative in Brazil or do you ship to Brazil please
Excellent!
why is it so quiet? is it hooked up to compressor? Also do you have a video like this on how to operate the older G8 version that doesn't have the air tact feature?
This video was shot in our Training Center. The GraverMach AT shown is hooked up to compressed air that is being run from a different area of the building. For initial setup of the GraverMax G8, please visit this link: ruclips.net/video/Gp815gV7gH0/видео.html . The GraverMax G8 has all the same functionality of the AT, with the exception of Airtact capability. Handpiece tuning will remain the same as shown in this video, but you will use the foot pedal to actuate the handpiece.
I'm having an issue, I have a new GraverMax G8. It has been relatively ok however at around 19 PSI the piece vibrates without enough pressure, I go up slightly and I get a very weak vibration that isnt giving enough push then uo a slight but more it goes too high and I get the vibrating foot pedal sound again.
Great Video Molly. Very helpful!
Hello !
I like the Video & want to know difference from GRS 004-965 Gravermach AT Vs Graver MAX G8
which is the latest & much better to buy ,I am getting ready for it)).
Appreciate very much for little bit of explanation between the two).
Thank you!
The primary difference between the GraverMach® AT and the GraverMax® G8 is whether you want to be able to actuate the handpiece with your hand, or with your foot only. The G8 only has foot control, and the AT offers the ability to start the pnuematic action with your hand or the foot control.
Hi Molly
I just bought gravermax G8 in Australia but they don't have hand pieces in stock so I have to for the stock come. So In the mean time can I use the different hand pieces which I bought on ebay? Does it work the same 901 or the magnum hand pieces from GRS?
Thanks Minh
Great information about my dream baby 😅thank you
Where can I get one of those stands for the handpieces?
nice video, now we know what is at the end of the dentist's drill :-), but seriously what tools go onto the handpieces, and how to use it, ought to do a 'demo' video of this tool.
and you say "handpiece" but what do you mean, a 'dremmel tool' , drill, grinder, motor? for those new to this channel, what industry are these tools for, just jewelery, or can this apply to all sorts of model building, micro machining, etc.
Cómo puedo adquirir el equipo. Ppra sudamérica. La. Paz Bolivia
HI ,
Is this machine used just for jewelry making or also for engraving fine line details images on materials like metals , plexiiglass , by connecting engraving machine tools with it ?
Thank you
Yes, this machine can be used for both jewelry and engraving.
Hi, absolutely loved the video very helpful! Where can I purchase one of these? I live in South Africa, please help!
grs.com/product/gravermach-at/
How much is the price allowed. What stuff is attached with the rig I want the full price. Is it possible to send a shipment to Egypt if you want to buy this device ?? I hope you quick reply
What pressure should the air compressor have?
The GraverMach® AT requires an oil-free compressed air supply with a minimum flow capacity of 1.4 CFM [ft³/min] or 40 LPM [L/min]. GRS recommends the air pressure to be 45-60 psi (3-4 bar) before it enters the GraverMach®.
Is it with inbuilt air compressor??
GRS Engraving systems require an external source of compressed oil-free air. They do not have compressors built-in.
Hiii,
If we want to buy that product. How to contact you madam.
Sorry for the delay. You can call Monday-Friday 8am-5pm cst at 800-835-3519 or you can email hello@grs.com
Hello, I bought the Magnum Airtact but I can not set it right ,it does not run as clean as the other hand pieces.
please help me
thanks and sorry about my english
best regards
stiglit john for technical or maintenance questions please contact us by calling 800-835-3519 or 620-3431084.
Thanks for the comment and your interest in GRS Tools. Best wishes on all your creative work.
Hello!
I wonder which one is better ,the graver Mach AT or the gravermax G8?
Actually, the AT is pretty much a G8 with airtact built into it.
Hi, Do u own GRS company? 🤔 I'm pretty much just Startin out into the trade. Well like two years in but always admire the GRS products! So innovative and well made!
How much is that set up
If you are purchasing in the US, you can see the current cost of Air Systems on our product page: grs.com/product-category/products/air-systems-handpieces/air-systems/ If you would like to know the cost of an entire setup, we have a "Build My Bench" tool that can help you out: grs.com/build-my-bench/
@@Grstools
On your site
The machine is alot
But other places have your machine for sale
Around 350$
Why is that
You can find quality used GRS Tools online, but do some research on the seller and the product that is being offered. There are a lot of cheaply made "knock-offs" out there. If the machine you have found is being listed as "New", at that price it is definitely not an authentic GRS product. Counterfeit products may be dangerous to operate. Cheap components and materials may present work hazards including exposure to unsafe chemicals and risk of fire. Additionally, a cheaply made tool is likely to break down faster, and will cost you more money in the long run.
Thank you Molly dear! You explained that machine beautifully! SOLD! Where do I buy?
www.grs.com/product/004-965-gravermach-at/
can the rotary handpiece be used with the foot control?
Great question. No, the 850 handpiece does not work with the foot control as is. If you would like to use the foot control as a throttle with the Ultra 850 look into the Ultra 850 with System 3 Foot Control (item #004-914). This can be run independently from the GraverMach AT or run through it.
www.grs.com/product/004-914-ultra-850-rotary-system-with-system-3-foot-control/
If you have any other questions please feel free to give us a call and speak with one of our friendly sales representatives.
Call: 800-835-3519 or 620-343-1084
Thanks and best wishes for your next project!
Thank you
Where do I get the loan for this bad boy!!!
Good video thanks.
Hi guys , I bought this machine from the Amazon, and I set up all stuff and turning on good but not working I think
Hello,
You should contact our customer service to help you with this issue. 620-343-1084
is it a engraving machine if it is please I really want this can you tell me how I can get this
The GRS GraverMach AT is a pneumatic handpiece system used for hand engraving and stone setting. You can purchase one through the following link:
www.grs.com/product/004-965-gravermach-at/
or speak with one of our amazing sales representatives by calling:
800-835-3519 or 620-343-1084
Thanks for the question and best wishes on all your creative work.
Please Can you tell me how much. this package
I'm from Sri Lankan
Visit www.grs.com/dealers/ to find your dealer.
Or you can call and speak to one of our helpful sales associates at 800-835-3519
Спасибо!
I maybe am the only one who wonders how the hoses are joined to the big compressor hose?
Existe algum representante no Brasil ou vcs despacha para o Brasil por favor //////Is there a representative in Brazil or do you ship to Brazil please
www.grs.com/dealers/. Here is a link to our current list of countries and the dealers there. I don't believe Brazil is on there yet.
If you get in contact with our customer service support here, www.grs.com/customer-service, they should be able to assist you and get the products you want to be shipped to you.
Parece un poco complicado su uso con tantos ajustes que hay que hacer y todavía falta lo del compresor .
The air system can be a bit intimidating with all the knobs on the front of the box. The most important adjustment is to tune your handpiece, shown at the 1:50 minute mark of this video. Once you do that, the strokes per minute is personal preference - Molly prefers the 3300 spm (33 on the dial) for general use. As for air compressors, we do sell compressors with the necessary attachment kits and fittings at grs.com. If you choose to purchase a compressor from somewhere else, we recommend oil-free air compressors for use with our air systems.
What is the difference between a single ended vs a double ended engraver?
Pr......pls
Здравствуйте сколько стоит ваш гравер где купить ,как?)))
www.grs.com/product/004-965-gravermach-at/
How much prices
Thank you for the question.
Pricing for the GraverMach AT and all other GRS tools sold in the USA can be found here: www.grs.com/
If you are located outside of the USA, you can find your authorized dealer here: www.grs.com/dealers/
Thanks again for the question and best wishes for all your future creative endeavors.
How much
www.grs.com/product/004-965-gravermach-at/
Very good matchine
I used it
Perise and how much? Plz reply me
www.grs.com/product/004-965-gravermach-at/
I have a used Graver Mister model number gf500. Made by GRS Corporation Where can I sell it?
Suban videos en español :(
Que chica tan linda