Get MORE USEABLE CAMBER for your 370z! | SPC Rear Camber Arms
HTML-код
- Опубликовано: 16 окт 2020
- When you drop your Z for more than 1 inch, you will need more alignment adjustability. Since the drop in the rear is more than an inch, WE ARE IN NEED OF MORE PARTS! SPC Rear Camber Arms (Toe Bolts included) are definitely the way to go for street use, daily driving, great reliability, and being cost effective.
#370z #SPC #Alignment
FOLLOW ME
Channel Instagram: @its.ericvenzon
Photography Instagram: @vndrdog.media
It's Eric Venzon publishes automotive, photography, and technology contents located in Southern Alberta, Canada. Авто/Мото
I am a little surprised they can get the left front within spec, but not the right front. You are correct, that once you start modding it seems like an endless money pit. Still projects are fun. :-)
Seems like they adjusted your car for more rear negative camber. So they weren't able to get it any closer to 0⁰? Toe seemed to have improved.
Nice videos man you deserve more views 👍🏻 keep it up
Hey man! Thanks and will sure do!
Aren’t you supposed to cut the hole bigger where the toe bolt goes?
You're right! I chose not to do it since I'm just going for OEM alignment. If I were to do a custom alignment then I would.
@@ItsEricVenzon can you put the camber arms on either side or do they have a specific side to go on?
@@jonathanmadrigal2961 i believe either arm works on either arms as long as you're starting at close to OEM length so you can drive yourself to the alignment shop
That’s nice 😂😊
That's good. That's niceee
Do we have do replace that toe bolt when install this camber kit??
Yup! Use the supplied toe bolt by SPC. You can bore out the hole to add more adjustability but I didn't because I only set it up as an OEM alignment.
@@ItsEricVenzon I try to buy it but it give me the options: With camber bolts OR standard. I'm not sure which one should I get
@@Qghostz Oh yeah i remembered that. Yeah, i only ordered the camber arms and they came with those bolts.
What does the toe bolt and camber arms bolts torque to ?
Torqued it to 80lbs
@@ItsEricVenzon both of them torqued to 80 foot pounds ? Just making sure going to install them tomorrow. It’s not necessary to cut the toe bolts right?
@@javouricole1664 yup. I recommend you going to an alignment shop after to get it dialed in.
But bro why after the alignment are you still having that camber difference (1°?!) Between the right front and left front???
Good question mguy. This was only for REAR camber arms and there isn't any adjustability for stock front camber hence the camber difference. I'll eventually in the future and i'll get aftermarket front camber arms.
god! all that toe? fucked tires
Heccyeaaaaaaaaaaaaa. Driving it with that much toe and the toe bolt i installed was hanging by a few threads on according to the tech. 😂