Fix Huge Dent with Drill Pull and Glexo Cold Glue!!
HTML-код
- Опубликовано: 20 фев 2020
- PDR dent removal on another Big Dent Repair. I'm going to use a new 2 part method a drill and cold glue combination to fix this huge dent on a rav4 quarter panel. if you a new PDR tech this will be a great new tip for your paintless dent removal journey.
Training Email Me
tinyurl.com/36529zkp
PDR Training secretpdrpaintlessdentrepairtr...
Collision Tools
pdr-training-tools.com/en/
Auto Body Suction Cup Slide Hammer for Dent Repair
amzn.to/3tBPtj3
Dewalt 20V Cordless Polisher
amzn.to/3QjM2aH
Plier for rolling sheetmetal edge
amzn.to/3mP5pegn
4oz Ballpeen Hammer
amzn.to/3mOL8p4
Gorilla Tape
amzn.to/3aViJLf
Soft Hammer
amzn.to/3mOnHMw
PDR Knock Down
amzn.to/3aYS5Bo
www.39-mobile-paintless-dent-...
/ dentdiscountmobile
dentdiscountmobileandbodyshop...
www.yelp.com/biz/dent-discoun...
www.yelp.com/biz/dent-discoun...
reviews.birdeye.com/dent-disc...
www.manta.com/c/mr5vj8q/dent-...
dent-discount-mobile-body-sho...
www.yellowpages.com/san-jose-...
www.angieslist.com/companylis... 
Авто/Мото
PDR Training Message Me Here!
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
When it comes to bare metal bodywork. I don’t think anyone in the world can compare with you. You are the best
Thank you
You’re a beast! I’ve been doing this for 30 years and I am humbled by your craft.
Thank you
Hi Clark - I also use Glexo cold glue, here in Devon, England. It works pretty good, but the price is extortionate, so, I did a little research and discovered that it is actually 3M Scotch Seal 5313 and is a fraction of the Glexo price, which is important to a young guy or girl starting out. I'm 78 now so I just do small dent and paint repairs for friends and family. Thanks for sharing your knowledge for free as you do. Most pdr tech's hide what they are "actually" doing much of the time, simply focussing the camera on the dent as it rises. You show how your hands are pushing on the tool. I would strongly advise any young, would be pdr tech to sign up to one of your courses, that would set them up for life. Worth every single dollar!
Right on David I’m going to check it out for myself I’m going to Google it right now thank you for your insight
These repairs are amazing .👍🏾👍🏾
Wow Amazing Job Ken
What an amazing video... never knew this was possible!
Great PDR video!
thank you for your comment!
great big dent repair!! good job!!
I appreciate that thank you
Brilliant work brother you’re just amazing I learn a lot just by watching your videos thanks for sharing your knowledge hope one day I’ll be just like you 👊🏾👌👍
Thank you!
It’s nice of you making the time to comment.
Thank you for sharing your knowledge and experience.
Thank you Saad for your comment I appreciate it..Clark Ken
secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/
That was an amazing demo.
When you get a chance take a look at the new video I just released four days ago...
Welcome aboard auto body everything!! Thank you for your compliment and your comment..
Wow....great work!
I’m glad you’re enjoying my videos.
More videos please you are the best out there indeed
I have three videos I will need to edit.. two of them are Bangerz.
Great Job! Nice tip for tool
Thank you Albin!!
I always see people on RUclips post pictures of fenders and make it seem as if its a bad dent and I can low key see alot of waves hidden in the video finally something thats actually a bad dent and a really good repair. Great job
Hey Christain thank you for your comment I really appreciate your positive feedback.
Your work is very beautiful creativity
Thank you great comment!!
Excellent job
Ishfaq thank you for your comment
Wow. Amazing
Nice work !
Thank you for taking the time to write a comment I really appreciate it.
I have a video that’s going to be released tonight that’s going to blow that video away make sure you hit the notification button on your subscription so that way you will get the notification.
Thank you again!!
Love your work can you share which pull tab with the metal rod those are.
Really amazing!
Thank you my friend for your comment I appreciate it..Clark Ken
secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/
This guy is amazing 👍👍
Thank you
Seriously u r one the best if not the best man great fix greetings from Beirut lebanon I'm learning too much from you I really thank u keep up the good work
Manofsteelpdr.com
I appreciate your comment.
Outstanding once again my friend I'm so excited to maybe meet you in person one day you seem like a really cool guy.
thank you my friend!
Perfect work
Thanks a lot 😊
Your skills amaze me bro
Manofsteelpdr.com
I appreciate your comment.
Nicely done, I wish I could do that
You will. Just need to practice.
Dude, I watch your stuff over and over. Would love to train with you before I move to another state by the end of the year. I work on one or two cars a week and only been at it for less then a year. Would love to be a full-time professional at it.
Send me an email that’s in the link in my video also I just posted a new video
setting here in amazement
Thank you!!
Fantastic❤
Amazing!!!! Great Job Ken - Dent Discount
Thank you!!
Súper trabajó de Ken
EL HOMBRE DE ACERO
Bravo
Thank you
Good bro
I'm a professional PDR technician myself, and I'm always up for a challenge. I must say I'm impressed,
Thank you Herman! When you get a chance take a look at my last video I put up.
Amazing. I want to learn more
Great!
Отличная работа👦💪🔥
Just awesome all the way
Thank you Radioman I really appreciate it!!
@@DentDiscountPDRBodyShop thanks for showing us, most people don't like to share their talent, it's appreciated big time
I So Need And a want that Week of free training
Excellente
I like your style
Thank you
Rocking it
I appreciate that
Were did you get the bridge?
Binge watching your vids working up the courage to tackle the drivers door on my XC70!! Volvo doors ain't thin garbage super tough! Luckily I don't have any cracked paint to contend with! Sadly I live in the UK ant I can't find a decent pdr specialist like you :(
Very nice thank you for your comment I appreciate you sharing
Thanks for sharing. GF1 👍👍👍😁😁😁😎
Thank you Frank for your comment
By the way where did you get that tool that bridge that pulls it up with the drill that's amazing I got to get one of those
Waoooooh your job us very good
Thank you
Fearless 💪
Thank you Sal!!
Oh boy you're going to love the dent I'm going to attempt on my truck bed after getting t-boned
Manofsteelpdr.com
I appreciate your comment.
Man I’m not just a couch potato Looking and not trying, you make this look easy but this is not ease l have more than 2 hr on a lower front fender and my glue is snapping back, I had to re glue so so many times and still not finished looks better but not finish I just have to finish with bodywork , love watching you doing it , you have more patience than me lol 👍👍👍 nice work my friend
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
Bravo
Thank you Mohammed for your comment I appreciate it..Clark Ken
secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/
Hi there,
Did you make a pulling machine? If I need how can I get it?
You're the man! Say what are your must have tools you need for pdr.. Can we get a website for most recommended pdr tools?
It’s all going to depend on what kind of training you have had in the past
@@DentDiscountPDRBodyShop gotcha.. Found kecco
Where can I buy drill full dents equipment?
Who is the manufacturer of this bridge puller and also the tabs, thanks?
Hi I love your Video
I need to own a few set drill pulling tools, wondering where I can buying from
Thank you and Very appreciate your advice and sharing
Here you go pdr-training-tools.com/en/products/pullers-lifters/32/elite-pro-light-puller/
Nice job, how do u like the bridge puller, I tried ordering one but it was out of stock so I got the k beam instead
k beam is just a good thank you for your comment!
Great Video Thank you! Do you have a video or a recommendation for a starter kit? I'd like to buy some decent tools to get started with PDR as a hobby maybe becoming a side hustle someday.
Check out A1 tools
Great job super man one question where did you get that bar to pull the quarter with the drill I never seen that before that is a super tool to have I'm a bodytech an it can come Handy 👍
The guy that I borrow it from at my shop said he got it from the Keco site
is this a dent on metal or plastic please? as looking at ways to fix a dent on metal part of my car
Hi, LG here, I like your style, can you give me some pointers on a repair I need to do on my car
Nice work how long did it take you
It took all day 8 hours . Thank you for the comment.
Beauty
thank you for the comment!
Wow!
Thank you for all your comments it’s really helping my videos. RUclips likes showing them more when you comment. thank you so much!
Hi that’s an amazing job. What are those tabs called with the metal bar and where can I get one online please?
I am working on manufacturing my own dent puller so I’ve been telling everybody to wait on buying one. If your in a rush you can do a google search thank you
Thank you for your comment I appreciate it..Clark Ken
secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/
Another great video
What brand bridge puller is that?
Yea what he said.
I borrow tools from the other guys in the shop. He said from Keco
I borrow tools from the other guys in the shop. He said from Keco
Haha right on. The keco I’ve seen is blue I believe.
What a name of hot glue do you using?
I made a video it’s on my channel high Strength glue check it out
Thank you for your comment I appreciate it..Clark Ken
secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/
what brand of silicon do you use
I use a high strength glue..
Depending on where you live
you may need to use a different type of glue depending on your humidity in your area.
That is insane! Replacing that panel in body shop all day any day. How much time did that take in total?
Manofsteelpdr.com
I appreciate your comment.
Repair done all in one day
what kind of glue do you use?
watch this video i show my glue and gun.
PDR High Strength Hot Glue & Gun! | Little-Big Dents! | No Drilling!
Why do I have a feeling he made that look way easier than it is....
Years of experience.. thank you for your comment Rob!
Great repair, what you charge on this?
$1500
@@DentDiscountPDRBodyShop how long did it take ? 10 hours ?
@@chip_stack Around 6 hours
Che tipo di colla usate?
Sorry don’t understand.
Where can you buy such a tool
Thank for your comment
I am working on manufacturing my own dent puller so I’ve been telling everybody to wait on buying one. If your in a rush you can do a google search thank you
@@DentDiscountPDRBodyShop Thank you I will wait for your sales. let me know how you will start selling
dove posso trovare questi attrezzi per bolli grossi?
Thank you for your comment I appreciate it..Clark Ken
secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/
Scraping the backside means removing it's painting?
No just removing The sound deadening
Thank you for your comment I appreciate it..Clark Ken
secretpdrpaintlessdentrepairtrainingonline.com/howtopaintlessdentremoval/
I n bobo good
I like to show you my car to see if you could fix a big crash I got on a hit and run. 89 Chevy caprice classic.
Thank you for your comment
? Is that black sticky glue.
Cold glue
WHAT GLUE DO YOU USE ! ...please
I made a video check it out on high Strength glue
I had the links in the video
I made a video check it out I have the links in that video the video it’s called high strength glue
How much are you charging for jobs like this? Lots of work
When I’m saving a quarter panel from replacement. 1500 2500 done same day.
I offer training for this type of work for my subscribers
Good job , You could ditch the music though !
Thank you for comment Daniel!! I’ve been checking out some different music. if you find something send it over I’d be happy to check it out.
What is the point with the bad music? It would be more interesting with no background. If we want music, we know where to find it.
No music at all !
As of right now you’re the only one that doesn’t like the music.
Send me some links I’m open to checking out some new music I know you have to like something out there.
...but this music is awful...
Gee Thank you for your comment