Build a Multiprotocol Module to Bind any Receiver with Fsi6 Transmitter
HTML-код
- Опубликовано: 12 авг 2021
- Hello Guys, In this video I am going to show you how to make a multiprotocol module using Arduino nano and NRF24L01. There are such receivers that you can't bind directly to 6ch 2.4Ghz transmitter (Flysky, Frsky and others). By this module it is possible to bind with almost all receivers. I used NRF24L01 that has low range, but you can use NRF24L01 PA+LNA for long range. I have used Bayang whoop Lite flight controller to bind, as it Silver firmware so it is compatible with almost all transmitters using this multiprotocol module. Using this module you can easily bind Eachine, JJRC toy drones. and I hope you have Like this video.
Thanks for Watching!
Bayang Flight controller : bit.ly/3dI1ueJ
Code: github.com/goebish/nrf24_mult...
Donate us via paytm or upi to get special Build Creation membership: bit.ly/39MdlE9
message or Email me after the donation to verify.
You can also donate Crypto: 1). Shiba coin: 0x6a9ce99ffed3a1b4f2a26e5eb01bd395ace4193e
2).Ethereum: 0xd145fbaD577Dd146b5a91e9Ec58F5C04AEDD98cB
MUSIC: Look Up by Pyrosion / pyrosion
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3rc6Gxr
Music promoted by Audio Library • Look Up - Pyrosion (No... 
Наука
Great tutorial and very well explanation!!
I can see the improvement!!
Great tutorial, bro! Nicely narrated! 😃✌
Thanks bro!
Great video Buddy! ❤
Very Informative 🙏🔥
Idea 💡 is really awesome broo❤️
Awesome video bro 🔥🔥
So useful 😘
Amazing video bro🔥
Proud of you son
AMAZING bro {🔥🔥}
Amazing bhai
Amazing bruhh ✌️
Hey I have bought the same whoop board.Please do a video on how to bind it to a toy drone transmitter.
nice video bro
Nice and cheap idea
Hey, did you modify the software in any way? I see it is by default for 12 PPM channels
Hey i need some help i made a reciever but it not binding , rc is hx 750 , what is the protocol to use, i need some help
Isn't there any way to connect FLYSKY reciever to the Flight Controller itself ?
*(PPM signal wire is connected to D2 pin of Arduino)*
It is not visible in diagram
And before making this multiprotocol module see the supported protocols in code because it can only bind with protocols which are given in “Supported protocol”.
Thank you very much for prompt reply, i'm planning to make one
@@aliezersangma4644 Good Luck
Nicee 👍🔥✌
Can it bind with xm+
Can I use any receiver for this
Bro i am able to bind this flight controller with my fsi6 according to your explanation but all motors are not running with throttle stick please help 🙏
Ya bro, i also stuck in same situation
Only 2 ch are working
You can make a twin motor airplane
But I think not a drone.
how to connect a flysky transmitter with an arduino + NRF24L01 receiver?
I have the Same question please share the answer of you found any
I have syma s33 but no transmitter of it but I have flysky fsi6 can I bind with this please reply
No, this is mainly for Bayang Protocol.
@@BuildCreation please brother suggest me how i connect it I have only flysky fsi6 transmitter
No bro, you can’t bind to Syma
@@BuildCreation any way to bind it please guide me bro please search it any how if possible any other way please reply
Can we control this with just wifi and Arduino?
No
Brother all products link please
Bhai puri video banao please
PPM signal wire is connected to which pin of arduino nano, your schematic is not clear
D2
Hi,I bought multiprotocol module.but somehow I got damaged. I can see a burn in a component. Will this project work as same as that of this module? iam using fsi6x
No, it doesn't work properly. I would suggest you to buy IRX6 multiprotocol module from banggood.
@@BuildCreation product is out of stock. I only want to bind 2 types of quad. Will this project useful for this purpose?
@@BuildCreation bro iam confused. Please help
@@aju5405 no bro, i won't recommend you to make this, because for some models (receiver) one-two channels don't work. Thatswhy, simply buy IRX6.
@@BuildCreation A already have Arduino nano. I only need to buy the rf module. I will try my drones with this method. I will give an update after the build.
hi bro,will it work for any Chinese gps drone?
Search on Internet, which protocol your receiver has. Then see supported protocol list in Code, if there is mention then you can bind
Can i use Fs- ct6b?
No
@@BuildCreation bro we need ppm pin for that....I've opend ct6b transmitter but I found ppm pin there
@@abhishekaich9951 oh, okay try it.
But first read my pinned comment in comment section, I edited that few hours ago.
@@BuildCreation sure bro....thank you
whoop lite f3 bind with fs C6bt transmitter ...... please 🙏🙏🙏🙏🙏🙏
No
Only with Fs-i6 / Fs-i6s
@@BuildCreation Ok
please update code link, thank you
Do you know how to change modes from angle mode to acro mode on this FC?