Simply incredible how far electronics have advanced in the last 40 yrs. Back in the 80's I built a six channel on the old 27Mhz band. The receiver was most daunting. True AM super heterodyne technology, hand turned pick-up coils with 455Khz IF coils. Miracle to have got it working at all. Well done on this very well presented project...Brilliant.
Me encanta sus proyectos. Quisiera aprender más de usted. Me toca meter el esfuerzo para lograrlo pero con sus videos tengo guía para lograrlo. Saludos desde Colombia. Sigue así mi hermano.
Hi, it's absolute impressive what you've done! I can't imagine how much effort you spent in this!Stunning!Lastly, Thank you so much to have shared this project!
Just finished up mine , all works perfectly , i used your code and schematic but installed it into an old transmitter case i had spare , i have posted pics and vid up on my Instagram and Facebook ( under same name) Huge thank you for all the effort and hard work you put into this , and for being so kind as to release it to the public Can not wait to get mine controlling something
did you notice any kind of latency in the command? In this video he used the e01-ml01dp5 module that reaches 2.5km but I was thinking of acquiring the e01-2g4m27d module They claim to reach up to 5km but I'm not sure if it has latency or if it can be used in model airplanes
@@herbertnatanael im only using a nrf24l01+pa+lna module , as i dont need super long distances , and iv not found any sort of delay , i was actually quite surprised how good it is me personally wouldnt use a diy radio in something like a plane as not as reliable as a proper radio system , but for ground systems its been working great :)
@@onebreh I know how a pot works, I am on about the toggle switches which they connected to both power and ground, they are connected directly to a digital pin, they have nothing to do with the pots and for switches you only need to connect it to either power or ground, not both, and use either pull up or pull down resistors which are present in the arduinos digital pins. Also pots don’t need to be linear, you get logarithmic pots too. Edit: see how they did the buttons, they can do the switches like that too with only 2 wires.
It would be interesting to try the same project, but with the ESP32 with external antennas connected through the ESP-Now protocol in Long-Range mode. The price range will be the same, and ESP32 can be programmed in Arduino IDE. Also, the weight of the receiver can be reduced using some tiny ESP32-C3 modules, such as Seeeduino.
Great ! a little advice: the on/off switch is poorly placed (under the palm of the hand) it would be good to move it (at the top for example) Congratulations
VTXs are very complex devices, they are far beyond what a hobbyist can do, just like most kinds of radio control, including the modules used in this video, they just use off the shelf radio modules they didn’t design them themselves. Video in general is a lot more difficult to work with and in drones or robotics they usually just take the camera and connect it to a VTX sometimes through an OSD chip.
yeah, 1.5 miles is not very far at all, 3.1 miles (5km) isnt that far. The modules he uses have a max rated distance of 2100m and not 2400m he claims, they output 100mw, the same as a standard 2.4ghz transmitter. if you were to amplify them you would get decent range, i amped my factory made transmitter from 100mw to 2w.
@@peytonsmith8765 yeah, ELRS blows this out the water and for around the same cost wile having something you can trust rather than an Arduino nano with 100mw 1.3 mile (2100m) diy modules. Was laughing at the 'long range' title, errm, no.
How much resistance are the potentiometers required? I want to use the prototype you designed for the levers with potentiometers. Thank you very much, excellent project.
I made a transmitter and receiver same as shown in the video but they both aren't communicating with each other, when I added serial monitor to both codes on the receivers serial monitor it says ' Signal lost, data reset. '
This setup is kinda cool, although I don't understand why you chose disposable batteries for the controller, though. I'd use rechargeable lithium batteries💯
Ya actually you can make just copy the code given by kendi to chat gpt and add display details you want and the type of display .... I also want to display the Rx and tx battery composition on transmitter bcs that's important while flying
Really Awesome man...😍🌹👌🏻 Can you make this Tx with some more extra Channels and Colour touch display like professional Tx16s. With different kind of RC model selections, and custom starup Logo and custom startup audio and other audio for mode selection. Thank you...😃🌹
bu kumandayı yapmak istiyordum kumandalar pahalı geliyordu ama sonunda hayalime kavuştum ve kumanda sipariş verebildim kendin yap videolarını çok seviyorum yaptığın maket uçakları çok özenerek yapıyorsunuz inşAllah kumanda geldiği zmn bende sizin gibi bir tane maket uçak yapabilirm iyi günler
You sir, are a GENIUS ! I've still got my old, non working vintage 'fleet' UK brand Tx from when I was 12 (i'm now 58).I'm also studying arduino and coding and now have a 3d printer, so this will be a fabulous project but using the old Tx & joysticks as the housing.It will be a real nostalgia trip. Question: Is there any difference in latency with the DIY system compared to shop bought systems ? And are there any interference issues ? or any other disadvantages with the DIY system i should know about ? Thank you for your excellent content. Amazing resource !! uk.
Thanks. Latency is higher than commercially produced RCs. Especially at long ranges. But a typical model airplane is flown within a radius of 150-250 meters. Therefore, the delay remains within reasonable limits. Signal link stability is also not as good as commercial production RCs. This type of Diy remote control systems is sufficient for models with small electric motors. But I don't recommend it for big and fuel engine models. But I should also point out that; I do not recommend very cheap (under 40-45 usd) commercial production RC systems for fuel models. Because they also have signal stability problems.
Teşekkürler. Onu çok öncesinde denedim. Yayı çıkarınca sadece gaz değil rudder ekseni de boşta kalıyor. Ve her iki yönde de kol aşırı serbest hareket ediyor. Bu uçuş esnasında çok sorun yaratır.
İstanbul model uçak klübünün pisti. Bir gün bu tarz işler yapan insanlarla tanışmak için oraya gittim fakat üye olmayan giremez diyerek içeri almadılar.
Thank you so much! Would you please let me know, can it be used with your rc boats let's say to move about 600 meters? Or it depends of boat' battery installed and engine power?
Menzil konusu her şeyden önce uzaktan kumanda sisteminin mesafesi ile ilgilidir. Tekne ve araba gibi yüzey kullanımlarında kumandaların normal mesafeleri yarı yarıya kısalır. Bazı durumlarda daha fazla. Kumanda sistemlerinin teknik detaylarındaki menziller genellikle yerden havaya ve açık arazi koşulları için belirtilir. Kumanda seçerken buna dikkat etmelisiniz.
@@Kendin-Yap I want to modify the transmitter casing a little bit. Can you please tell me which software you used for making the transmitter box so that I can use it to modify it? I opened in fusion 360 but couldn't modify it
I tried it and it works very well. But I would like to ask for a code that can control the RC car (mix 2 channels using a single joystick module). Thank you very much.
Wonderfull project!! Some questions: can we have more than 8 ch? Can we have more analog? The switch can be the multiple position type or only on/off? Can we have 1 tx and more rx (like model) ?
There can be 9 channels. The switches have 2 positions, that is, on/off. The number of digital and analog input and output pins of the Arduino you will use for the circuit determines the limit. Multiple recipients possible.
@@Kendin-Yap do you have in plan a project with more than 9channel? There is a working way to expand the number of digital and analog input and output pins of the Arduino nano (fpr example)?
7.4V battery is sufficient. 9V not required. If you're sure you've done everything right with the soldering, you're left with the NRF24 modules. NRF24 modules are a bit unstable and their connection can sometimes be problematic. You can try two different interesting methods for the connection problem. One of them is to hold the metal part of the antenna's connection socket firmly with two fingers. The human body can act as an antenna booster, and sometimes it works. Another method is one that a follower of mine discovered and said it works; Wrapping the antennas with aluminum foil. This can work as a booster for antennas and enable the two modules to communicate.
Kullanılabilir. Muhtemelen servo hareketlerinin sınırları bir miktar değişebilir. Map satırlarındaki değerleri değiştirerek bu sorun giderilebilir (deneme yanılma ile test etmek gerek)
26awg slikon kablo veya normal montaj kablosu (çok damarlı olursa daha yumuşak olur) kullanabilirsiniz. Montaj kablosu ismi ile aratın. Bir çok seçenek çıkacaktır.
Tüm NRF24 lerin kod kısmı aynıdır. Yaşadığınız sorun kod ile ilgili değil. NRF24 modüller elektriksel parazitlerden çok etkilenirler. . Burada kullandıklarım filtreli modeldir. Özellikle vericideki. Voltajın da çok kararlı ve doğru olması gerekiyor. Voltaj sorunları ve elektriksel gürültü (parzit) RF24 ler de bağlanı kurma sorunlarına yol açar. Bu yüzden metal kasalı olan versiyon (metal kasa filtre görevi görür) en sorunsuz bağlantı sağlayan modüldür. Filtresiz modellerdeki bağlantı sorunları için şu linkteki yazım faydalı olabilir... www.rcpano.net/arduino-ve-nrf24-modul-kullanilalarak-yapilan-uzaktan-kumanda-rc-devre-sorunlari-ve-olasi-sebepleri/
Teşekkür ederim cevaplarınız icin. Nrf 24 bağlantımi diğer videolarınızı bakıp yaklaşık 10 cm. Ayarlamistim. Sanırım kisaltmam gerekecek. Bir de piyasada şu anda piller çok pahalı . 3300 mah olana niyetlendim. Ancak o da 280 Gr . Fırçasız tek motorla yaptığınız uçaklar için ağır olur mu ?
böyle kanallar Türkiye'ye bol bol lazım ama videoyu ingilizce yapmadan reklam gelirlerini bu işe yetecek düzeyde çıkarmanız maalesef çok zor (hem Türkiye'de o kadar talep yok hem de ortalama reklam gelirleri düşük). umarım istediğiniz noktaya ulaşırsınız
Simply incredible how far electronics have advanced in the last 40 yrs. Back in the 80's I built a six channel on the old 27Mhz band. The receiver was most daunting. True AM super heterodyne technology, hand turned pick-up coils with 455Khz IF coils. Miracle to have got it working at all. Well done on this very well presented project...Brilliant.
Hand tuned couls , rhat truly something tbh
legend
im fiddlinga round with a project retro build... 50s style.
a motor driven PWM? the tX is the easy bit actually... just CW.
I remember those times, it was enthusiasm and not this today, you type in your laptop and you're done.
Hi, where can I find design for such a thing? I would love to build something like that.
Till now have made 6ch control, drone, retracts, rc airplane all work perfect. With few words Kendin is MASTER!!!!!!!!!
mini bayraktar lan adam. hela olsun abi !
Me encanta sus proyectos. Quisiera aprender más de usted. Me toca meter el esfuerzo para lograrlo pero con sus videos tengo guía para lograrlo. Saludos desde Colombia. Sigue así mi hermano.
bende devamını bekliyordum bu işe gönülvermeye hazır ama maddi yetersizlikleri dolayısı ile başlamayan yeni nesil için çare olmuşsunuz .teşekkürler.
Hi, it's absolute impressive what you've done! I can't imagine how much effort you spent in this!Stunning!Lastly, Thank you so much to have shared this project!
amazing. perfect for anyone who has time and doesnt want to waste money on an expensive RX and TX
Just finished up mine , all works perfectly , i used your code and schematic but installed it into an old transmitter case i had spare , i have posted pics and vid up on my Instagram and Facebook ( under same name) Huge thank you for all the effort and hard work you put into this , and for being so kind as to release it to the public
Can not wait to get mine controlling something
did you notice any kind of latency in the command? In this video he used the e01-ml01dp5 module that reaches 2.5km but I was thinking of acquiring the e01-2g4m27d module They claim to reach up to 5km but I'm not sure if it has latency or if it can be used in model airplanes
@@herbertnatanael im only using a nrf24l01+pa+lna module , as i dont need super long distances , and iv not found any sort of delay , i was actually quite surprised how good it is
me personally wouldnt use a diy radio in something like a plane as not as reliable as a proper radio system , but for ground systems its been working great :)
Can you help me? After I move the joystick nothing happens
@@MEllOW6372 double check all your connections and make sure you use the code as is , dont edit any of it to start it should work fine
Projeyi yapıp bırakmamışsın menzil testini de yapmışsın muhteşem olmuş
Love the way you mount the analog joystick on the case!!!!
Excellent range test! The best I have seen yet. Thank you.
Dang that's gotta be the coolest thing I've seen ever!
For the Transmitter you don’t need to connect power and ground to the switches, you can just use the internal pull-up or pulldown internal resistors.
it changes the behaviour of the pot. For linear input you need to connect power and grund too.
@@onebreh I know how a pot works, I am on about the toggle switches which they connected to both power and ground, they are connected directly to a digital pin, they have nothing to do with the pots and for switches you only need to connect it to either power or ground, not both, and use either pull up or pull down resistors which are present in the arduinos digital pins.
Also pots don’t need to be linear, you get logarithmic pots too.
Edit: see how they did the buttons, they can do the switches like that too with only 2 wires.
It's really amazing. It has a really long range. This distance is enough for me
It would be interesting to try the same project, but with the ESP32 with external antennas connected through the ESP-Now protocol in Long-Range mode. The price range will be the same, and ESP32 can be programmed in Arduino IDE. Also, the weight of the receiver can be reduced using some tiny ESP32-C3 modules, such as Seeeduino.
no.
how would that work?
Well done mam really unbelievable ❤❤❤❤
Fantastic! I've been looking for something like this for a long time! Many thanks for your generosity and sharing.
Thanks
Nice 3d model 👌👌👌
very good 🎉🎉🎉
Allah razı olsun, bu projelerinizi bizimle paylaştığınız! Çok sağolun!
Brilliant and Extrodinary Work......Masterful Indeed!!
I'm gonna attempt this built this summer... wish me luck guys.
Great !
a little advice: the on/off switch is poorly placed (under the palm of the hand) it would be good to move it (at the top for example)
Congratulations
Muy elaborado, de principio a fin.
Total: Una obra de arte.
Y para hacerlo, hay que saber si o SI.
im glad i found your channel, i will be able to build some projects with your videos as reference
Very nice. Seems like a cool project to do. Love you're content type. Keep it up!
Your flying experience is really great I like your flying
Was hoping that you would build the vTX system too! That's what I'm most interested in
VTXs are very complex devices, they are far beyond what a hobbyist can do, just like most kinds of radio control, including the modules used in this video, they just use off the shelf radio modules they didn’t design them themselves. Video in general is a lot more difficult to work with and in drones or robotics they usually just take the camera and connect it to a VTX sometimes through an OSD chip.
WHAT AN AMAZING IDEA TO CHECK THE INPUT DELAY SO THAT RANGE CAN BE DETERMINED ...
Türkiyedeki alışveriş sitelerinden malzemeleri aldığınız zaman 750 tl tutuyor ( kapsız) fiyatı tutuyor. ardiunosuz 430 tl tutuyor.güvenilir sitelerde kumanda 2000 tlden satılıyor. paranız varsa direkt kumanda alın geçin ama paranız yoksa aradaki farkla batarya sarj aletini almaya yetecek kadar para var.
This is going on my "project list". I subbed because I'm looking forward to more content. Thanks!
Insane build but can you increase the range upto 5 km.....it will help a lot
What do u need that much range for?
@@Youdontwannaknow.. because 1.5 miles is NOT long range!
yeah, 1.5 miles is not very far at all, 3.1 miles (5km) isnt that far. The modules he uses have a max rated distance of 2100m and not 2400m he claims, they output 100mw, the same as a standard 2.4ghz transmitter. if you were to amplify them you would get decent range, i amped my factory made transmitter from 100mw to 2w.
Just get a cheap elrs remote. They can go way further than your fpv goggles can go. Probably less expensive than this too
@@peytonsmith8765 yeah, ELRS blows this out the water and for around the same cost wile having something you can trust rather than an Arduino nano with 100mw 1.3 mile (2100m) diy modules.
Was laughing at the 'long range' title, errm, no.
How much resistance are the potentiometers required? I want to use the prototype you designed for the levers with potentiometers. Thank you very much, excellent project.
Thanks. All potentiometers are 10K
I made a transmitter and receiver same as shown in the video but they both aren't communicating with each other, when I added serial monitor to both codes on the receivers serial monitor it says ' Signal lost, data reset. '
@@priyesh406 www.rcpano.net/arduino-nrf24-rc-circuit-problems/ . The topics I mentioned here may be useful for you.
Please can you make a video on this same transmitter with 0.96" Oled display and arduino nano without compromising on any channel?
This setup is kinda cool, although I don't understand why you chose disposable batteries for the controller, though.
I'd use rechargeable lithium batteries💯
I am planning to make one, actually much better and more complex one
Yes make it
@@shushruthmg4630 Let me know, I'd appreciate it 💪😎
Ya actually you can make just copy the code given by kendi to chat gpt and add display details you want and the type of display .... I also want to display the Rx and tx battery composition on transmitter bcs that's important while flying
Hocam helal olsun. Diyecek söz bulamıyorum artık.
Hocam çok güzel çalışmışsın tebrik ediyorum 🥹👏👏
coolest thing i eve seen today
Thank you so much to have shared this project🥰🥰
Harika bir maker örneği olmuş hocam, ellerine sağlık
did the on/off switch bother you when you were using the remote control?
:) No
How cool that is! Çok beğendim, Umarım PCB design ile de yaparsınız.
Professor muito bom. Já sou seu fã. Obrigado por compartilhar seu conhecimento. Saúde, obrigado.
very cool and very clean build. awesome 👍
Outstanding sir... One the best video... Appreciated 👉💯💯❤️
Really Awesome man...😍🌹👌🏻
Can you make this Tx with some more extra Channels and Colour touch display like professional Tx16s.
With different kind of RC model selections, and custom starup Logo and custom startup audio and other audio for mode selection.
Thank you...😃🌹
Purely awesome! Amazing skills! Congratulations!
Awsome build. Great flight too.
very nice projects, watched all videos, nice keep it up 👍
bu kumandayı yapmak istiyordum kumandalar pahalı geliyordu ama sonunda hayalime kavuştum ve kumanda sipariş verebildim kendin yap videolarını çok seviyorum yaptığın maket uçakları çok özenerek yapıyorsunuz inşAllah kumanda geldiği zmn bende sizin gibi bir tane maket uçak yapabilirm iyi günler
Yaptın mı?
@@agahgokdag1845 kumandayı aldım uçağıda yaptım pervanesi kırıldı sipariş verdim geri pervaneyi takıcağım ve uçurmaya devam edebileceğim
Thank you.
I'm jealous of your skills
Abi sen napıyon ya, işi baya ileriye almışın reis 😂👍
kendin i canot know this electronics but i love to see your vedios...
This is a rival to the Bayraktar TB2 😁
It is definitely necessary NRF24 wireless 3.3v
Elinize emeğinize sağlık. Çok güzel bir proje olmuş. çalışmalarınızda kolaylıklar dilerim.
So so intresting 😮😊😊
Really amazing buddy, I don't know what to say, amazing! I will make too
Very nice build quality....I really want to learn Arduino....time to start studying
This is very awesome project
Yes
Süper olmuş. Uçururken kullandığınız görüntü aktarma sistemi ney?
DJI Air Unit
You sir, are a GENIUS ! I've still got my old, non working vintage 'fleet' UK brand Tx from when I was 12 (i'm now 58).I'm also studying arduino and coding and now have a 3d printer, so this will be a fabulous project but using the old Tx & joysticks as the housing.It will be a real nostalgia trip. Question: Is there any difference in latency with the DIY system compared to shop bought systems ? And are there any interference issues ? or any other disadvantages with the DIY system i should know about ? Thank you for your excellent content. Amazing resource !! uk.
Thanks. Latency is higher than commercially produced RCs. Especially at long ranges. But a typical model airplane is flown within a radius of 150-250 meters. Therefore, the delay remains within reasonable limits. Signal link stability is also not as good as commercial production RCs. This type of Diy remote control systems is sufficient for models with small electric motors. But I don't recommend it for big and fuel engine models. But I should also point out that; I do not recommend very cheap (under 40-45 usd) commercial production RC systems for fuel models. Because they also have signal stability problems.
@@Kendin-Yap Thank you for the excellent response/advice. I will definitely bear all that in mind when choosing my application carefully.
Harika.. Gaz kontrol joystiğindeki yayı çıkarsaydınız çok daha iyi olurdu bence
Teşekkürler. Onu çok öncesinde denedim. Yayı çıkarınca sadece gaz değil rudder ekseni de boşta kalıyor. Ve her iki yönde de kol aşırı serbest hareket ediyor. Bu uçuş esnasında çok sorun yaratır.
Mükemmel ötesi bir çalışma emeğinize sağlık 👏👏👏
Thnaks for your sharing , good job 👍
Çok güzel bir çalışma olmuş, ellerinize sağlık.
you r amazing! i wish i knew circuity!! u probably majored in engineering!?
vidio kaçırmışım bügüm karşıma çıktı son derece ınanılmaz güzel 👍👍
Bir videonuzda 3d yazıcı ile çok güzel bir joistik yapmıştınız. Bunda onu neden kullanmadınız? 3D yazıcı baskıları yeterince iyi olmuyor mu acaba?
3D baskı ile yaptığım joystik çok iyi çalışıyor ama bu vidodaki kumanda yı minimal tasarladım. Standart boy joystikler bu kasa için çok aşırı büyük.
çok güzel bir çalışma olmuş elinize sağlık
Mükemmel olmuş. Kaliteli içerikler için teşekkür ederim.
Mükemmel bir proje olmuş. Elinize sağlık.
Thank you so much for this educational video, I learned so much.
This project is wonderful.
İstanbul model uçak klübünün pisti. Bir gün bu tarz işler yapan insanlarla tanışmak için oraya gittim fakat üye olmayan giremez diyerek içeri almadılar.
Simply awesome. Can you make a auto pilot too?? That would be great 👍
Thank you so much! Would you please let me know, can it be used with your rc boats let's say to move about 600 meters? Or it depends of boat' battery installed and engine power?
Menzil konusu her şeyden önce uzaktan kumanda sisteminin mesafesi ile ilgilidir. Tekne ve araba gibi yüzey kullanımlarında kumandaların normal mesafeleri yarı yarıya kısalır. Bazı durumlarda daha fazla. Kumanda sistemlerinin teknik detaylarındaki menziller genellikle yerden havaya ve açık arazi koşulları için belirtilir. Kumanda seçerken buna dikkat etmelisiniz.
@@Kendin-Yap Çok teşekkür ederim
Can I use rc flysky joystick in this
Yes
Try ELRS and your eyes gets opened ^^
Great work, I think the range can be longer if you change for 1/4 Wave Ground Plane Antenna
Thanks. Definitely different antennas and especially high db ones will extend the range.
You are genius Bro
Can we use simple nrf module instead of this long range module? I mean are they interchangeable??
Yes you can. The pin connections of all NRF24 modules are the same. The code is also the same.
@@Kendin-Yap Ok thanks. Kindly one more question. What's the material of this 3d print?
@@AKElectroDIY PLA filament
@@Kendin-Yap I want to modify the transmitter casing a little bit. Can you please tell me which software you used for making the transmitter box so that I can use it to modify it? I opened in fusion 360 but couldn't modify it
Değerli hocam mümkünse yaptığınız kumandanin solid 3D step dosyalarını da sitenize ekleyebilir misiniz
I tried it and it works very well. But I would like to ask for a code that can control the RC car (mix 2 channels using a single joystick module). Thank you very much.
Wonderfull project!! Some questions: can we have more than 8 ch? Can we have more analog? The switch can be the multiple position type or only on/off? Can we have 1 tx and more rx (like model) ?
There can be 9 channels. The switches have 2 positions, that is, on/off. The number of digital and analog input and output pins of the Arduino you will use for the circuit determines the limit.
Multiple recipients possible.
@@Kendin-Yap do you have in plan a project with more than 9channel? There is a working way to expand the number of digital and analog input and output pins of the Arduino nano (fpr example)?
great topic, thanks 👍
Çok güzel bir çalışma olmuş tebrikler
Can you make a diy transmitter and receiver with fc by using stm32 mcu and E28 module which support ardupilot, elrs and long range comunication
Does the battery power required have to be 9 volts? and after I used a 7.4 volt battery it couldn't transmit to the receiver
7.4V battery is sufficient. 9V not required. If you're sure you've done everything right with the soldering, you're left with the NRF24 modules. NRF24 modules are a bit unstable and their connection can sometimes be problematic. You can try two different interesting methods for the connection problem. One of them is to hold the metal part of the antenna's connection socket firmly with two fingers. The human body can act as an antenna booster, and sometimes it works. Another method is one that a follower of mine discovered and said it works; Wrapping the antennas with aluminum foil. This can work as a booster for antennas and enable the two modules to communicate.
이건 뭐 봐도 못만들겠다...진짜 대단하네 ㅎㅎ
수신기 만드는 방법도 있나요?
Wonderful job!👍
SUPER........BEST.....
İyi günler, Joystickler 10K yerine 2K olursa ne gibi farklar olur hocam ? 2.3K kullansak sıkıntı olur mu?
Kullanılabilir. Muhtemelen servo hareketlerinin sınırları bir miktar değişebilir. Map satırlarındaki değerleri değiştirerek bu sorun giderilebilir (deneme yanılma ile test etmek gerek)
How many volts, ampere and cells the lipo battery requires for 8 channels?
2S, i.e. 7.4V Lipo is suitable. Capacity and current do not affect the operation of the transmitter.
Hocam iyi günler devrede kullandığınız kabloları nereden temin ediyorsunuz? Devredeki kablolar kaç mm yada Awg öğrenebilir miyim? İyi çalışmalar.
26awg slikon kablo veya normal montaj kablosu (çok damarlı olursa daha yumuşak olur) kullanabilirsiniz. Montaj kablosu ismi ile aratın. Bir çok seçenek çıkacaktır.
Nrf24 ile elinizdeki modelin kodları aynı mi? Bir türlü bağlantı kuramadım, haberleşmeyi saglayamadim.
Tüm NRF24 lerin kod kısmı aynıdır. Yaşadığınız sorun kod ile ilgili değil. NRF24 modüller elektriksel parazitlerden çok etkilenirler. . Burada kullandıklarım filtreli modeldir. Özellikle vericideki. Voltajın da çok kararlı ve doğru olması gerekiyor. Voltaj sorunları ve elektriksel gürültü (parzit) RF24 ler de bağlanı kurma sorunlarına yol açar. Bu yüzden metal kasalı olan versiyon (metal kasa filtre görevi görür) en sorunsuz bağlantı sağlayan modüldür. Filtresiz modellerdeki bağlantı sorunları için şu linkteki yazım faydalı olabilir... www.rcpano.net/arduino-ve-nrf24-modul-kullanilalarak-yapilan-uzaktan-kumanda-rc-devre-sorunlari-ve-olasi-sebepleri/
Teşekkür ederim cevaplarınız icin. Nrf 24 bağlantımi diğer videolarınızı bakıp yaklaşık 10 cm. Ayarlamistim. Sanırım kisaltmam gerekecek.
Bir de piyasada şu anda piller çok pahalı . 3300 mah olana niyetlendim. Ancak o da 280 Gr . Fırçasız tek motorla yaptığınız uçaklar için ağır olur mu ?
böyle kanallar Türkiye'ye bol bol lazım ama videoyu ingilizce yapmadan reklam gelirlerini bu işe yetecek düzeyde çıkarmanız maalesef çok zor (hem Türkiye'de o kadar talep yok hem de ortalama reklam gelirleri düşük). umarım istediğiniz noktaya ulaşırsınız
Please what are the materials needed to build this
Hello brother can you make 10 channel transmitter and receiver with this if yes then please explain me how ?
Ficou muito bom