Restoration of Broken Xbox 360: This Was Unexpected!! Retrobright ASMR

Restoration and repair a broken and dead XBOX 360
In this video, you will see a full episode of restoring and repairing of a dead Xbox 360, also you can see a technic to find out how to silence the Xbox 360 fans.
From the outside, the front panel was broken, the machine was heating up quickly, and the disk drive and fan were making horrible noises. After opening the Xbox, I noticed something interesting. Most of the metal panel under the frame was rusted due to spilling liquid, and this damage caused by the solution also damaged the main board and parts of the board were corroded. Also, after opening the heatsinks, I realized that the thermal paste of this Xbox 360 had not been replaced for a long time and the device was practically without silicone paste, which justifies the extremely high temperature of the device. To fix a dead Xbox 360 laser, there is a lot of advice to be found on the internet, most of which are hard to understand. I was looking for a simple home solution to repair my Xbox 360 disc drive. First of all, the laser should be cleaned using cotton swab and alcohol. If this does not work, the next solution can be used. The cost of a replacement disk drive is relatively high. For this, which is known as laser adjustment or pot tweak, using a multimeter and a screwdriver, reduce the laser resistance step by step and with very short increment and after each step, you should test the disk drive to see if it works or not, until the laser is able to read the games. Note that values smaller than 3 can burn your laser in general. So do not rush to do this.
Also, the loud noise of the fans was due to their being dirty and not lubricated. In this video, you can see how to silence the Xbox 360 fans. Actually I wasn't able to find out how to lubricate Xbox 360 fans on the internet, So I tried to test it and it worked. The sound of the disk drive was also due to its box not being tight, which was also resolved.
I also used hydrogen peroxide and UV light to remove the plastic yellowing caused by the aging of the Xbox 360, which made all the yellowing disappear.
Please subscribe if you want to see more of my upcoming projects. I put a subscribe link down below:
t.ly/ypJE4
Your one like is valuable to me,
So to help me with RUclips Algorithm, I would like to ask you please don't forget to like this video.
Also if you have any questions, it would be an honor for me to respond in the comments section. I read every one and do my best to answer all of your comments.
/ @restorationdivision
#restorationdivision
#xbox
#restoration
#asmr
#repair
#howto
#RROD
#

[@freakiblade]

No way that the video is THIS GOOD but doesn’t have 1k. Sub well earned.

[@leonikonomopoulos3923]

Id like to add, this is a Jasper motherboard specifically the v2 or the kronos, meaning it is the most reliable you can get on an xbox 360 phat. Restoring this is a grat idea and did a grat job doing so.

[@CliffNark]

This ain't a Kronos, the Kronos (Tonasket) doesn't use the two part GPU heatsink

[@aramkhalil-uz5xh]

Grat?

[@colesyaj_tech]

Kronos is just the GPU name. The board name is Tonasket, actual Jaspers do come with GPU-Kronos too tho, such as in this case

[@carloknightRCP]

Jasper V2 was built from September 2009.
This one ain't...

[@thomascobb5514]

This is a jasper v1 still reliable none to less though

[@TheRedmondGamer]

Excellent footage and editing. Superb video. Cheers!

[@RestorationDivision]

Thank you! Cheers!

[@unmushinthebeegyoshi]

just discovered your channel and it's look pretty cool, keep up !

[@texasrattlesnake31637]

Good restoration job brother!

[@whitepanda7588]

Keep it up man.Recommend u to do 360 slim restoration+mod

[@CaduSilva-wz3ni]

19:40 Is it possible to do this on the Xbox 360 Slim cooler as well ?

[@INFINITEMODIFICATIONS]

Nice Jasper console. I refurbish and modify at least a few of these every week.

[@icozsnake]

Este video me pone algo triste. Solo fue limpieza, no hubo nada de restauración o reparación y hasta le quita emoción al video. De todos modos dejo mi sub y like

[@davidg86]

Good job enjoyed the video subscribed

[@Undesired_champion]

Great Video and I Subbed, liked and turn on the notifications, also keep up the good work

[@usercringecms]

16k veiws and 854 subscribers only,this video is perfect and you earned my sub

[@RestorationDivision]

Glad you enjoyed it!

[@CaptainJRW]

Exceptional work

[@alimfarhan985]

Are u inspired by odd tinkering? Very nice content.

[@freakiblade]

probably, very similar content

[@fabianofran3153]

Ficou sensacional o controle também um excelente console.

[@luanzito414]

Parabéns pelo trabalho incrível 😁🎉👏

[@aarond5823]

I’m pretty sure i saw this video from somewhere else

[@BeyondEntertainment_]

Do you have a shop online? Would be interested in something like this for my Xbox 360

[@RestorationDivision]

Hi, I'm trying to make this possible soon. Thank you

[@azertag3494]

You put too much thermal paste

[@Zer0ducksgiven]

watching you insert that hdd backwards killed me insides

[@xKuruh]

me too it broke my asmr atm 🤣

[@yonasbenatia8620]

i like this14:07😂

[@outworld724]

High quality video, only 45 sub!!!

[@mondrassnorlax9569]

Debes trabajar más en la aplicación de la pasta térmica, la que pusiste fue demasiada, tambien recomiendo cambiar la liga del mecanismo del lector, en lo demas excelente

[@HitomiCOD2]

Copycat of Odd Tinkering but goddamn is it a good one. subscribed for sure!

[@rafaelcastro4782]

*audience applause*👏👏👏

[@biscuit52]

Nice video

[@Mr.Satan_69]

Amazing restoration.

[@RestorationDivision]

Many thanks!

[@Brayden2016bingo]

I like this is solo relaxing :-)

[@RestorationDivision]

Glad you enjoy it!

[@grazhdaninrossii]

Nice

[@outfield1988]

Please talk to

[@TheRealXenity]

can u help my xbox 360
(found mine and dissasembled)

[@MegatronGanjubass]

Твою налево, этот крендель еще и xbox ухайдокал еклмн

[@ElangoElangoElaa]

என்ன என்னமோ பண்ற பா