thanks, trying to help a old friend, i dont know yet if this will work, he hired some clowns and told him he needed a new throttle body, they replaced it and it still has issues. i have him motivated to do his own work, and im helping him gather info, thanks again!!
03 envoy My oil pressure gauge goes all the way to 80 some time and this morning it just like stalled out while driving made a weird winding noise and that light piped up
interesting, so it was a pin tension/ connection issue, vs broken wiring... I'll give the wife's truck a quick wiggle and listen for changes when I clean the t-body ...
Mine gets the Loss Of Power if you drive it for a long period of time. Anyone know what to check. Or could it still be the harness...? But, if it was the harness wouldn’t it do it all the time? Thanks. Big Jim
I'm currently experiencing a no start with the same issue its cranking but no start I believe its the throttle body at first I thought it was the camshaft
@@angelacosta1452 nope but from i understood it needs a throttle body relearn but i found out that doing the simple relearn procedure will NOT work unless i clear out the check engine light first, but if that doesn't do it then looks like i fried the computer, heck even replacing the throttle body didn't fix anything And i believe its what preventing me from doing a proper ECM relearn as it involves going over 35 miles an hour for 25 minutes
Abres el switch en ignición y aceleras dos veces a fondo y lo apagas,repites eso una ves más y al tercer ves ya la prendes y solucionado sin necesidad de escáner
This one worked for me...2005 Buick Ranier
Honestly thank you for this i really needed it.
Thanks for your help. Much appreciated.
thanks, trying to help a old friend, i dont know yet if this will work, he hired some clowns and told him he needed a new throttle body, they replaced it and it still has issues. i have him motivated to do his own work, and im helping him gather info, thanks again!!
very helpful video man
03 envoy
My oil pressure gauge goes all the way to 80 some time and this morning it just like stalled out while driving made a weird winding noise and that light piped up
interesting, so it was a pin tension/ connection issue, vs broken wiring... I'll give the wife's truck a quick wiggle and listen for changes when I clean the t-body ...
Or P0446.
Thats what tripped my 04 Burban.
Wish I saw this before dropping $600 on on new parts 😂 but it needed them anyways
I have a 04 Chevy trailblazer that randomly pops up reduce engine power
I had this problem and my air filter compartment wasn't screwed tight 04: suburban
Thank you very very much going to go try it now :)
Mine is doing that when I floor it
What ended up being the problem?
Mine throws a p1680 when it does the reduced engine power
I gor the light on but my truco won even start 😪
just happened to me in my chevy trailblazer 2002 hopefully i can fix by myself
Did that work? For u
Thx sirr
Thanks
This just happened to me right now after I got mad at a car going slow so I overpass it . And seconds later my car couldn’t go fast no more .
Same here
Check your battery connection
Be nice to others
@@THISISDUMBBBBBBBBBNBNN same thought
Mine is doing the exact same thing
Mine gets the Loss Of Power if you drive it for a long period of time. Anyone know what to check. Or could it still be the harness...? But, if it was the harness wouldn’t it do it all the time? Thanks. Big Jim
no, just like in the issue, it could be intermittent. and ses codes?
Try checking and cleaning your MAP & MAF sensors. Those could be causing the truck to get reduced engine power.
Slot of times it's a faulty battery Walmart sold me a battery with low cranking amps the tester said replace
Will this cause the car not to start ?
I'm currently experiencing a no start with the same issue its cranking but no start I believe its the throttle body at first I thought it was the camshaft
This is happening to my car
This happened after i installed a new battery while doing a computer reset
Did u end up fixing it ? I replace my battery too and I think it might be the computer
@@angelacosta1452 nope but from i understood it needs a throttle body relearn but i found out that doing the simple relearn procedure will NOT work unless i clear out the check engine light first, but if that doesn't do it then looks like i fried the computer, heck even replacing the throttle body didn't fix anything
And i believe its what preventing me from doing a proper ECM relearn as it involves going over 35 miles an hour for 25 minutes
@@fargeekssame thing , you gotta find an advanced scanner with the throttle learn reset function .
@@Godking_118 nah it turned out the throttle body was getting no power and I don't remember pulling out the fuse for it
The throttle body has a fuze?
Abres el switch en ignición y aceleras dos veces a fondo y lo apagas,repites eso una ves más y al tercer ves ya la prendes y solucionado sin necesidad de escáner
Enserio enserio? Buena onda
What exactly does this fix? Does it turn off the reduced engine light? Does it fix the reduced engine power? Please explain more.