When you said you noticed one major problem I thought you were going to say you realized you only made room for six beers! Very cool project and it turned out great. Thanks for sharing that!
Recently started woodworking and came across your channel. I’ve already made a couple things off your channel. Very creative ideas. Looking forward to more
Another great project! As always love your thought and design process as much as the making. Just remember.... "A cold beer...... It's not just for Christmas!!"
No worries at all Doug 👍 If l may make a suggestion....try siliconing the cans down.....it may be a better solution than the blocks for stopping those cans from floating 👍 Good luck with it 👍😁🇦🇺🍺🍺🍺
Love it Unky Knackerbags!!! The only problem is that it only holds 6 beers, where do the other 20 beers go?! hhah love your work mate, this is fantastic and nothing else like it.
Hahahahaha.....Cheers Ryno.....mate l hear ya re the other 20...l'll have to work on that one for a future build 😂 Thanks as always for watching mate and have yourself a great Sunday 👍😁🇦🇺 P.S Have you recovered after the Tigers win??
@@diyforknuckleheads maybe you can think of one like a spring loaded or gravity fed or so, where you stack them like a magazine and self loads for the next one
@@diyforknuckleheads mate it was struggle street for over a week. You've inspired me to try and give it a go! Maybe we have the #KnuckleheadsBeerCaddyChallenge which is a mouthful you know what i mean haha Cheers mate!
@@OzSawdustMakers I bet it was mate....bloody good team...you'll probably do it again next year!! Great idea re the challenge mate...l'll give it some thought 😁🇦🇺🍺🍺🍺🍺
Klaus....Short answer...yes! Great tip👍👍 I also think that if the cans were siliconed down, that also might be a quick solution 🤔 Thanks for watching mate 👍🇦🇺😁🍺
An extremely important issue.....Who's going to refill this, coz you may be 'too tired' after the 6 pack is thoughtfully disposed of? Betchya never thought of that, did ya?
you should make one for coke. I dont drink alcohol...never have my whole life, but coke good and cold, thats where it is. I am drug and alcohol free from birth. great video as always. cant wait till the next one.
Yeah it's still a work in progress Andrew.....maybe if l siliconed the cans down, that would be the go 🤔 Thanks for watching mate and for the feedback 👍😁🇦🇺🍺
Will you be doing a beginners guide to using a table saw in the future? I noticed you had removed the plastic blade guard as seen in this video (something I thought you being the safety conscious fella that you are) wouldn't do when building projects like this or when you used it to help build your farmhouse table (part one)!
G'day mate...removing the guard on the table saw is always a little controversial.....l don't advocate for anyone to remove theirs but here's a video from Steve Ramsay that pretty much sums it up ruclips.net/video/ViL58JvRjvs/видео.html In regard to using the table saw...l will probably do a video....not too sure as too when....Thanks for watching 👍🇦🇺😁
At 3:48 you are cutting a piece that has larger width than its length. There seems to be very high chance for a kickback. Why don't you use a cross-cut sled for such a cut?
Would 6 magnets under perspex hold the cans in place during the freeze? Great tip knackers Edit glue them in place so when the ice melts the cans stay in place.
Pro tip: If you want to avoid tear-out on hard coated chipboard, use a sharp saw, and make sure that the cutting motion is *into* the visible surface. On a circular saw, this means nice side up. With a jigsaw, nice side down. And tape. And if your jigsaw can tilt the blade back to front, activate that feature. Edit: You're showing very good practice to put a sacrificial board under what you're drilling, that prevents tear-out perfectly. Great job! Edit: I truly love your Dad jokes. They add a special touch.
@@diyforknuckleheads absolutely! I love how you share your knowledge and skills in such a relatable manner. Not all too shiny, with results that a normal guy can achieve. This helps beginners to do something and not only watch. Great show!
Heres a tip uncle knackkerrrssss, i would just put the silicone used to seal the inside, on the bottom of the cans, that way they don't pop up and would remain stuck to the bottom, as we say in plumbing "do ya best, silicone the rest" ahahahah
Mate I can only say that this is the best bloody beer 🍺🍺🍺 caddy I’ve seen because it’s a wonderful project that suits our 🇦🇺🍻drinkers. Dad joke was actually not to bad on this one & I reckon there’ll be many whom make this, super design Knackers 🇦🇺🇦🇺🇦🇺🍻🍻🍻👍👍👍🍺
Good onya Dirk 👍 Gave it a workout last night....worked a treat 🍺🍺🍺 Thanks for watching mate and l hope you have a relaxing Sunday 👍😁 Looking forward to your show tonight 👍👍😁🇦🇺
OOOOOOOOOOOOOOOOOOOOOOOOOO NEW GLOVES 😋Obviously didn't help with that Band aid finger 😂😋😂 what a COOL build mate well done Ohhh and flip it over next time ya using a Forstner or spade bit to prevent tear out.
Yeah mate.....very fancy 😂😂.....The bandaid was covering a bloody big slice that l self inflicted upon myself whist cutting vegetables!!! 😂 Have a good one mate 👍😁🇦🇺
Ohm my goodness Uncle Knackers your current Dad joke is shocking..... However, this project really amped things up and sparked my interest. Love the magnetic cap catcher, but some may find it polarising..... Thanks for another cracking project.
Great tip Knackers.....but l got an equally great tip for you.....next time don't bloody well painted it Richmond colours.....it almost wreaked it for me
Shane, Back in October I contacted you about a beer caddy with your twist on it. You said you would try to get one out there. You delivered with flying colors. Not only did you come up with some genius ideas, you made the caddy in Iowa Hawkeye colors. I don't know if that was by design or a coincidence (since I'm from Iowa). Either way, thanks for the build. I plan on making a few of them real soon. Best wishes. Mike
I remember Mike 👍 You got the old brain matter turning over 👍 Glad you liked it mate. Just an idea but l reckon for version 2.0 that you silicone the cans down to hold them in place rather than going through the effort of cutting the blocks to hold the cans down during the freezing process. Good luck with them mate and go the Hawkeyes 👍👍😁🇦🇺🍺
Do not drink any alcohol... but great for other drinks as well... maybe cans, other non alcoholic bottles, or even a 1.25, or two litre caddy? Great tip Uncle Knackers, as always! 😉🇦🇺👍
Great build Shane but one problem for me, crappy weather here at the moment so no BBQs, come to think of it when is there any good weather ha ha ha. Still a great build though. Stay Safe Mate, Barry (ENG)
Thanks Bazz! Mate...big contrast to here.. it's really starting to warm up ...Aussie summer here we come! .looking forward to a few barbies coming up for sure 🍺 Hope you're having a great weekend 👍😁🇦🇺🍺
Great job! However getting people to like ice cold beer is a marketers dream, everyone knows the colder the beverage the less you taste it, meaning you can sell the crappiest beer, and so long as people drink it cold they won’t notice it tastes awful 😂😂😂😂😂
)I LOVE Aussies (female ones) and their beer inventions, tho none actually come to mind, i think i just might make one... over the winter giving me something to look forward to using in the spring, we of course DO NOT drink on the umm jobsite during the ahhh work hours etc. I am also thinkin of more capacity for my Foster's . (jk i only drink hi octane cheap shit)
Good stuff mate 🍺 If you do have a crack at making one, try siliconing the cans down. I think that would be better than having to make the blocks. Thanks for watching 👍🇦🇺😁
Yes Knackers! About time bud this one has been simmering nicely for a while, glad you finally got round to making one and a great idea with the cooler! Good job bud
If you can come up with an easy solution for when the cans pop up after the ice melts to keep them securely held down it would be much appreciated I really love this idea
I can confirm what someone else said: I live in England and I never put beer in the fridge. I prefer room temperature beer. When it's cold you can't taste it and can't drink it fast enough! On a VERY hot day I do drink cold beer, but... it's England, I could die of thirst waiting for a hot day! Having said that, it's a great project, which has given me some tips for making other things. The blue tape tips before sawing/drilling are priceless, and the cap catcher has given me a great idea for a new project: a wooden board painted like a dart board, embedded with magnets, at which you throw your beer caps from your arm chair. I'm too lazy to make it so you can have that idea on me! Cheers!
You're an ideas man Nick....magnetic dart board hey 🤔 .....leave it with me 😁 Mate if you rocked up to a barbecue over here with warm beer you would be politely escorted out 😂 Thanks for watching mate.....much appreciated 👍😁🇦🇺🍺🍺
Great project! nice work, love the bottle cap catcher. Oh! and I'll be sure to stay clear from the jumper cables next time I'm in the bar.... 😂🤣👍 Skål! Ron//
Nicely done (as always) 😁. I don't even drink and I want one 😂🤣. Great dad joke as usual, think I'll use that one.... if we ever see real people again after lockdown that is. Thanks Unk.. keep em coming 😁👍.
Gudday uncle knackers,I absolutely love watching your videos and the dad jokes are great,,, sometimes. I am a new wood worker although I am 52 years old. Thanks for all the tips and tricks. You should have your own show on tv mate. Sorry about being a pom. Keep it up
Awesome Sauce Knackers ! What a ripper idea and it turned out bloody beautiful mate. It's been a while mate, so i really hope life's been going great for you and you're family Shane, and you're all healthy and happy, and shaping up for a completely ripper chrissy. Good to see you again old mate, and take care of yourself. Cheers
![DDG & G Herbo - Nosey [Official Video]](http://i.ytimg.com/vi/I9Ra0Zc2NlQ/mqdefault.jpg)
When you said you noticed one major problem I thought you were going to say you realized you only made room for six beers!
Very cool project and it turned out great. Thanks for sharing that!
😂😂.....that as well C.C 😂 Thanks for watching mate and l hope you're having a great weekend 👍😁🇦🇺🍺🍺
Good one and neat work. You forgot your sticker!! one question. what happens after all that ice melts? wouldn't those cans pop up again?
Good question. Hopefully all the beer would be drunk by then! :) :) :)
It's only a six pack mate.....they should be drunk by the time the ice melts 😂
That's another great project from Uncle Knackers!
Cheers Steve...appreciate the comment mate and l hope you're having a great weekend 👍😁🇦🇺🍺
Genius.
Cheers Stuart 👍👍😁🇦🇺🍺
Now that is a suitable project before Summer comes around again.cheers 🍻👍🦘
What an awesome project!!!👌🏻🍺🍺🍺
Thanks Darren! Glad you liked it mate 👍👍👍😁🇦🇺😂🍺
Recently started woodworking and came across your channel. I’ve already made a couple things off your channel. Very creative ideas. Looking forward to more
Awesome! Thank you for that Frank! I appreciate you taking the time to watch mate 👍😁🇦🇺
You’re awesome Uncle Knackers 🇦🇺🇦🇺🇦🇺
👍 Glad you liked it David 👍😁🇦🇺🇦🇺
Another great project! As always love your thought and design process as much as the making.
Just remember.... "A cold beer...... It's not just for Christmas!!"
🍺....l'm with you there all the way mate....it's always 5 o'clock somewhere in the world 😂 Thanks for watching 👍😁🇦🇺🍺
Brilliant
Thanks Jamie 😁🍺🇦🇺🍺
I really really like this. Thanks.
Cheers mate 👍
This is my next project...guaranteed. Thank you for sharing. Just love this!!
No worries at all Doug 👍 If l may make a suggestion....try siliconing the cans down.....it may be a better solution than the blocks for stopping those cans from floating 👍 Good luck with it 👍😁🇦🇺🍺🍺🍺
What a bonza project mate . You could make similar one for tinnies . Bill in uk
Yeah mate.....tinnies would work for sure 👍 Thanks for watching Bill 👍🇦🇺😁
Wow great job matey
Thanks Laura 👍😁🇦🇺
COOOOOL
Cheers mate 😁🇦🇺👍🍺🍺
Love it Unky Knackerbags!!! The only problem is that it only holds 6 beers, where do the other 20 beers go?! hhah love your work mate, this is fantastic and nothing else like it.
Hahahahaha.....Cheers Ryno.....mate l hear ya re the other 20...l'll have to work on that one for a future build 😂 Thanks as always for watching mate and have yourself a great Sunday 👍😁🇦🇺
P.S Have you recovered after the Tigers win??
@@diyforknuckleheads maybe you can think of one like a spring loaded or gravity fed or so, where you stack them like a magazine and self loads for the next one
@@terryyouth Now we're talkin' mate 😂
@@diyforknuckleheads mate it was struggle street for over a week. You've inspired me to try and give it a go! Maybe we have the #KnuckleheadsBeerCaddyChallenge which is a mouthful you know what i mean haha Cheers mate!
@@OzSawdustMakers I bet it was mate....bloody good team...you'll probably do it again next year!! Great idea re the challenge mate...l'll give it some thought 😁🇦🇺🍺🍺🍺🍺
do you think magnets would work to hold those cans???????? see all those question marks, means please answer.
Klaus....Short answer...yes! Great tip👍👍 I also think that if the cans were siliconed down, that also might be a quick solution 🤔 Thanks for watching mate 👍🇦🇺😁🍺
An extremely important issue.....Who's going to refill this, coz you may be 'too tired' after the 6 pack is thoughtfully disposed of? Betchya never thought of that, did ya?
😂😂.....There's gotta be a backup in the freezer Roscoe 👍🍺🍺🍺🍺
A fly's fart too small haaahaaahaaa!!!
😂😂
you should make one for coke. I dont drink alcohol...never have my whole life, but coke good and cold, thats where it is. I am drug and alcohol free from birth. great video as always. cant wait till the next one.
G'day Klaus....yes mate it is certainly adaptable to being a Coke Caddy!! A Nice good Coke is beautiful...love it!
Thanks fir watching mate 👍😁🇦🇺
@@diyforknuckleheads yeah, always a good video, always like to see a new one.
Maybe fix the cans to the bottom somehow? Great project and I enjoy your other videos, I built your workbench a few years ago
Yeah it's still a work in progress Andrew.....maybe if l siliconed the cans down, that would be the go 🤔 Thanks for watching mate and for the feedback 👍😁🇦🇺🍺
Will you be doing a beginners guide to using a table saw in the future? I noticed you had removed the plastic blade guard as seen in this video (something I thought you being the safety conscious fella that you are) wouldn't do when building projects like this or when you used it to help build your farmhouse table (part one)!
G'day mate...removing the guard on the table saw is always a little controversial.....l don't advocate for anyone to remove theirs but here's a video from Steve Ramsay that pretty much sums it up ruclips.net/video/ViL58JvRjvs/видео.html In regard to using the table saw...l will probably do a video....not too sure as too when....Thanks for watching 👍🇦🇺😁
Many little tricks going into that one! Now we just need a slab sized version 😁 🍺🍺🍺🍺🍺🍺 🍺🍺🍺🍺🍺🍺 🍺🍺🍺🍺🍺🍺 🍺🍺🍺🍺🍺🍺
You're an ideas man James 😂😂🍺🍺🍺🍺🍺
Ha, in England they like their beer room temp. I just couldn’t get used to it being a kiwi lad.
Believe me, we don't.. It's just laziness on our part 😂
Warm beer.....what can l say.....not in my Top 5 🤔 Thanks for watching Nick 👍😁🇦🇺🍺🍺🍺🍺
😂😂🍺
@@burlapbutcher1569 lol!
Love it!! Never knew I needed this until I saw your video!
Hahahahaha...good stuff Alan 😂 Thanks for watching mate 👍😁🇦🇺🍺
Hello. Very beautiful and high quality workmanship. Fun and instructive video. 👍👍👍
Hi Celal....glad you liked the video mate an l appreciate the comment! Cheers 👍😁🇦🇺
Instablaster.
At 3:48 you are cutting a piece that has larger width than its length. There seems to be very high chance for a kickback. Why don't you use a cross-cut sled for such a cut?
Would 6 magnets under perspex hold the cans in place during the freeze? Great tip knackers
Edit glue them in place so when the ice melts the cans stay in place.
Yeah it's still a work in progress Lee. Maybe if we silicone the cans down that would be the go 🤔 Thanks fir watching mate 👍😁🇦🇺🍺
Pro tip:
If you want to avoid tear-out on hard coated chipboard, use a sharp saw, and make sure that the cutting motion is *into* the visible surface. On a circular saw, this means nice side up. With a jigsaw, nice side down. And tape. And if your jigsaw can tilt the blade back to front, activate that feature.
Edit:
You're showing very good practice to put a sacrificial board under what you're drilling, that prevents tear-out perfectly. Great job!
Edit: I truly love your Dad jokes. They add a special touch.
Thanks Andre!...appreciate the extra tips mate and l'm glad you enjoy the dad jokes 😂😂
@@diyforknuckleheads absolutely! I love how you share your knowledge and skills in such a relatable manner. Not all too shiny, with results that a normal guy can achieve. This helps beginners to do something and not only watch. Great show!
@@andrebartels1690 Really appreciate that mate 👍👍
Heres a tip uncle knackkerrrssss, i would just put the silicone used to seal the inside, on the bottom of the cans, that way they don't pop up and would remain stuck to the bottom, as we say in plumbing "do ya best, silicone the rest" ahahahah
Hahahahaha....mate......youre an ideas man....why didn't l think of that Wes!!! That's my version 2.0 Cheers mate 👍😁🇦🇺
Mate I can only say that this is the best bloody beer 🍺🍺🍺 caddy I’ve seen because it’s a wonderful project that suits our 🇦🇺🍻drinkers.
Dad joke was actually not to bad on this one & I reckon there’ll be many whom make this, super design Knackers 🇦🇺🇦🇺🇦🇺🍻🍻🍻👍👍👍🍺
Good onya Dirk 👍 Gave it a workout last night....worked a treat 🍺🍺🍺 Thanks for watching mate and l hope you have a relaxing Sunday 👍😁 Looking forward to your show tonight 👍👍😁🇦🇺
OOOOOOOOOOOOOOOOOOOOOOOOOO NEW GLOVES 😋Obviously didn't help with that Band aid finger 😂😋😂 what a COOL build mate well done Ohhh and flip it over next time ya using a Forstner or spade bit to prevent tear out.
Yeah mate.....very fancy 😂😂.....The bandaid was covering a bloody big slice that l self inflicted upon myself whist cutting vegetables!!! 😂 Have a good one mate 👍😁🇦🇺
@@diyforknuckleheads WOW take a big fella to admit he hurt himself whilst doing the veggies 😄😄 mate give me a call so we can arrange a get together
@@BenHollist Those bloody carrots mate 😂 I'll call ya mate 👍👍
I made several of these a couple of years ago, but yours take the art to another level, perhaps I should update and pinch your ideas. Cheers
Cheers Darryl and go for it mate 👍 In case you do, l'd suggest as an improvement to silicone the cans down 👍👍
Mate thats cool ! I like the cap catchers too, pretty smart :D
G'day Dave....thanks mate...glad you liked it 😁🇦🇺
Ohm my goodness Uncle Knackers your current Dad joke is shocking.....
However, this project really amped things up and sparked my interest.
Love the magnetic cap catcher, but some may find it polarising.....
Thanks for another cracking project.
😂😂....well done David....l think l need you as my script writer 😂 Thanks for watching 👍😁🇦🇺🍺
Great tip Knackers.....but l got an equally great tip for you.....next time don't bloody well painted it Richmond colours.....it almost wreaked it for me
Hahahahaha....sorry about that Les....next time it'll blue and white 🤔 👍😁🇦🇺
Shane, Back in October I contacted you about a beer caddy with your twist on it. You said you would try to get one out there. You delivered with flying colors. Not only did you come up with some genius ideas, you made the caddy in Iowa Hawkeye colors. I don't know if that was by design or a coincidence (since I'm from Iowa). Either way, thanks for the build. I plan on making a few of them real soon. Best wishes. Mike
I remember Mike 👍 You got the old brain matter turning over 👍 Glad you liked it mate. Just an idea but l reckon for version 2.0 that you silicone the cans down to hold them in place rather than going through the effort of cutting the blocks to hold the cans down during the freezing process. Good luck with them mate and go the Hawkeyes 👍👍😁🇦🇺🍺
Do not drink any alcohol... but great for other drinks as well... maybe cans, other non alcoholic bottles, or even a 1.25, or two litre caddy?
Great tip Uncle Knackers, as always! 😉🇦🇺👍
Thanks Isa! Appreciate the feedback mate 👍😁🇦🇺
Bloody Marvellous. Great for this heat wave over East. BTW, I though Knackers was your Uncle. Where did Bob come from LOL
😂....long lost cousin Pete 👍😁😂
Warm beer is bad, warm Australian beer is toxic. Hehe...
Actually the magnetic bottle top catcher was really cool. Thanks.
Toxic?....l agree Richard 😂 Thanks for watching mate 👍😁🇦🇺
Never knew that Bob is my uncle
Brilliant work Knackers! Hashtag #ideasman Cheers! 🍺🍺🍺🍺🍺🍺
🍺 Cheers mate 🍺🍺
Great build Shane but one problem for me, crappy weather here at the moment so no BBQs, come to think of it when is there any good weather ha ha ha.
Still a great build though.
Stay Safe Mate,
Barry (ENG)
Thanks Bazz! Mate...big contrast to here.. it's really starting to warm up ...Aussie summer here we come! .looking forward to a few barbies coming up for sure 🍺 Hope you're having a great weekend 👍😁🇦🇺🍺
Bloody ripper mate! 👍🏽
And don't you start anything! 🤣🤣🤣🤣 8/10👌🏽
😂😂....an oldie but a goodie Bill 😂 Thanks for watching mate 👍😁🇦🇺🍺
Great job! However getting people to like ice cold beer is a marketers dream, everyone knows the colder the beverage the less you taste it, meaning you can sell the crappiest beer, and so long as people drink it cold they won’t notice it tastes awful 😂😂😂😂😂
You might have a point there mate 😂....Having said that, there's nothing better 🍺🍺🍺 Thanks for watching Tony 👍😁🇦🇺
Very creative and well built, Uncle Knackers. A man will do anything to keep his beer cold, huh?
Whatever it takes mate 😂 🍺🍺 Thanks for watching 👍😁🇦🇺🍺🍺
)I LOVE Aussies (female ones) and their beer inventions, tho none actually come to mind, i think i just might make one... over the winter giving me something to look forward to using in the spring, we of course DO NOT drink on the umm jobsite during the ahhh work hours etc. I am also thinkin of more capacity for my Foster's . (jk i only drink hi octane cheap shit)
Good stuff mate 🍺 If you do have a crack at making one, try siliconing the cans down. I think that would be better than having to make the blocks. Thanks for watching 👍🇦🇺😁
A different style of beer tote. I do like the magnet idea. Dj= 7. I thought the cables should of jump started the punch line.
Thanks Michael....happy with a 7 mate 😂
Ever in 🇺🇸 mate.. I got a spot for ya... beers always iced! Cheers
You're a legend Frank....l'll have one with you for sure 🍺🍺🍺
Great video Uncle Knackers........and on a subject close to my heart too.....!!!!
😂....good stuff Terry 👍😁🇦🇺🍺🍺
Hey shane. In the future I will make one of those that u built.....cool video.👍👍🇨🇦
Cheers Dan and thanks for watching mate 👍😁🇦🇺🍺🍺
That's heaps cool. I like the idea with the masking tape 👍
Cheers B.B....yeah the tape works really well 👍😁🇦🇺
How much does this weigh when loaded down with ice and beer? Seems like it might be kind of heavy, no? And does it only fit bottles? What about cans?
Thomas there is a little weight but it's the same as a cooler box with ice 👍
Nice video,greetings from Davenport Iowa,USA
G'day Charles 👍 Glad you liked it mate and thanks for watching from all the way over in Davenport!...much appreciated 👍😁🇦🇺🍺
Nice project - envious of the bean cans, there they are 398 - wish they were 555. Cheers and stay safe
Cheers mate.....soup cans are also good 👍👍😁🍺
All very nice but what about all the water that will come off it through condensation? it'll just sit in the ply box and delaminate in no time.
A few coats of poly on all surfaces sorts that mate 👍
Brilliant idea, great joke!!! Perfect channel!!! Cheers!!
👍👍......thanks for that....really appreciate the comment 👍😁🇦🇺
Yes Knackers! About time bud this one has been simmering nicely for a while, glad you finally got round to making one and a great idea with the cooler! Good job bud
Thanks Paolo....still needs a little refining but l think we're getting there 👍 Appreciate you taking the time to watch mate 👍🇦🇺
What a great project, the peep window is a great idea it makes it a bit unique.
Cheers Riaan....it certainly adds to the illusion of coldness 👍 Thanks for watching mate 👍😁🇦🇺
Keep up the quirky videos , comments , ideas and creations
No worries at all Brad....will do and thanks for watching mate.....much appreciated 👍🇦🇺😁🍺
Three men walked into a bar. You'd think that at least one of them would have seen it.
😂😂
Shane, good onya mate 👍👍👍👍 lets hit the turps soon 😉
I'll be up for that Josh! 🍺🍺 Thanks for watching mate 👍😁🇦🇺🍺🍺
That’s gold love the colours yellow and black 👍
I take it you're a Richmond supporter mate??? 👍😁🇦🇺
I got beer thirsty,, wanna try that , too.😄😄😄🇵🇭
Give it a crack Noel🍺🍺 Thanks for watching mate 👍😁🇦🇺
If you can come up with an easy solution for when the cans pop up after the ice melts to keep them securely held down it would be much appreciated I really love this idea
Mate, l'm thinking that if we siliconed the cans down we might be on a winner 🤔 Thanks for watching 👍😁🇦🇺
Fantastic idea! No one likes a warm beer!
You got that right mate!.....the colder the better 🍺🍺 Thanks for watching 👍😁🇦🇺
Another great video mate 👍🏻🙌🏻
Thanks Tom...appreciate it mate 👍😁🇦🇺
fab idea....must make one for the summer
👍👍🍺🍺
Another awesome build knackerssssssss
Cheers Wes....hope you're having a cracking weekend old mate 👍😁🇦🇺
What no overpriced Yeti thing.
Love the build there knackers.
Hahahaaa! No overpriced Yeti thing!!!
Cheers Steve! 👍😁🇦🇺🍺
Came for the beer, stayed for the joke!
😂....Good stuff mate! Thanks for watching 👍😁🇦🇺🎄
It's a toolbox for alcoholics 😂😂😂
😂🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺
Great beer cady .Awesome work 👌
Thanks Jaime 👍👍😁🇦🇺🎄
Just glue the cans to the base mate 😉
Yeah for sure mate...silicone the cans down is going to be the go for version 2.0 👍😁🇦🇺🍺
Thank you for sharing Love will win, fear will not - Love fear 💖 than it will never win 🙏
That’s a cooooool project mate 😀
Thanks Jason.....it's gonna get a workout this summer 👍😁🇦🇺🍺🍺
I can confirm what someone else said: I live in England and I never put beer in the fridge. I prefer room temperature beer. When it's cold you can't taste it and can't drink it fast enough! On a VERY hot day I do drink cold beer, but... it's England, I could die of thirst waiting for a hot day! Having said that, it's a great project, which has given me some tips for making other things. The blue tape tips before sawing/drilling are priceless, and the cap catcher has given me a great idea for a new project: a wooden board painted like a dart board, embedded with magnets, at which you throw your beer caps from your arm chair. I'm too lazy to make it so you can have that idea on me! Cheers!
You're an ideas man Nick....magnetic dart board hey 🤔 .....leave it with me 😁 Mate if you rocked up to a barbecue over here with warm beer you would be politely escorted out 😂 Thanks for watching mate.....much appreciated 👍😁🇦🇺🍺🍺
One thousand likes!
Cheers mate! Glad you liked the vid 👍😁🇦🇺
Very innovative. Love it!
Thanks Bob! 👍😁🇦🇺🍺🍺
Nice drop that Coopers ale
Yeah l love the stuff mate 👍😁🇦🇺🍺🍺🍺🍺🍺🍺
I can listen to him talk all day.
Glad you liked the video mate 👍😁🇦🇺
Great project! nice work, love the bottle cap catcher. Oh! and I'll be sure to stay clear from the jumper cables next time I'm in the bar.... 😂🤣👍 Skål! Ron//
Thanks Ron! Yeah ya gotta be careful of those jumper cables mate 😂😂 Thanks for
watching 🇦🇺 👍😁
Those beers look TASTY!
Mmmmnn....did someone say beer!! 🍺🍺🍺....They were very tasty Todd....cold too 👍😁🇦🇺
Nicely done (as always) 😁. I don't even drink and I want one 😂🤣. Great dad joke as usual, think I'll use that one.... if we ever see real people again after lockdown that is. Thanks Unk.. keep em coming 😁👍.
No worries Frank! Glad you liked it mate 😁👍👍🇦🇺
Love it!!! Cheers mate!!! 🍻
No worries Dale....glad you liked it mate 👍😁🇦🇺
Bloody good job Uncle Knackers! And the cap catcher - what a ripper! Love them jokes...........
Hahahhahaha...cheers Matt 👍👍😁🇦🇺
I love it!🇦🇺👴🏻
Thanks Mark! Appreciate the comment mate 😁👍🇦🇺
You little ripper 🍻
Cheers Dan 🍺🍺
Love a Coopers Ale
It's good stuff Scott....my fav 👍😁🇦🇺🍺
Gudday uncle knackers,I absolutely love watching your videos and the dad jokes are great,,, sometimes. I am a new wood worker although I am 52 years old. Thanks for all the tips and tricks. You should have your own show on tv mate. Sorry about being a pom. Keep it up
Apologies accepted re you country of origin Jaxon 😂 Glad you liked the video mate and l really appreciate the kind feedback! Cheers mate 👍🇦🇺😁
A bloody bonza project knackers! The rare earth magnets idea is genius. Lovin the channel. Cheers 👍😎🇦🇺
Awesome!....thanks John 👍👍😁🇦🇺
I have an Esky !
😂....come on Bob.....think outside the square mate 👍😁😂🍺
Great project.
Cheers Noel! Appreciate the comment mate and thanks for watching 👍😁🇦🇺🍺
Really nice!
Cheers mate 👍😁🇦🇺🍺
Great to see your drinking a brilliant South Australian product... Go the Coopers!!! 👍
Mothers milk mate 👍👍🍺🍺
Awesome video!
Thanks Yvonne 👍😁😁🇦🇺
I liked this video before I even watched it.
10/10 would pre-like again!
Hahahahaha....Cheers mate 👍😁🇦🇺
Awesome Sauce Knackers ! What a ripper idea and it turned out bloody beautiful mate. It's been a while mate, so i really hope life's been going great for you and you're family Shane, and you're all healthy and happy, and shaping up for a completely ripper chrissy. Good to see you again old mate, and take care of yourself. Cheers
G'day James....great to hear from ya mate. Same to you and yours Mate and thanks for watching 👍😁🇦🇺🍺
Aussie summer dreams come true !!!! Great tip Uncle K !!! Shared that Dad joke with my brother, he was Shocked!!
Hahahahaha...tooshay Annie 😂 Bring on summer l say 😁👍🇦🇺🍺
Great job, great project. Ran into a problem and solved it swimmingly! I even liked the dad joke. I'd love to have a Cooper's with you.
Did you say Coopers??? I'm there Joseph! 😂🍺....Thanks for watching mate 👍😁🇦🇺