FORD FOCUS RS INTAKE INSTALL
HTML-код
- Опубликовано: 18 сен 2024
- How to install a Mishimoto intake on a 2016 Ford Focus RS. This intake really wakes up the noise. Lots of nice choo choo noise will come from the hood after installing this intake. Check out the install.
www.mishimoto....
Direct fit for 2016+ Ford Focus RS
Dyno-proven maximum gains of up to 12 whp and 15 wtq on the stock tune
Designed to work with stock tune with no additional tuning required
Air filter placed to receive maximum airflow from the front of the vehicle
Black powder-coated airbox keeps unwanted hot air from entering the air filter
Highly aggressive intake tone under acceleration
Available with a polished, wrinkle black or Wrinkle Nitrous Blue pipe
CARB EO #: D-759-2
Mishimoto Lifetime Warranty
Follow us on instagram:
/ k_rs.one
/ blakesgarage
➥ Get $5 off MyPetrolBox use coupon code "WRENCHON" mypetrolbox.com
➥ Get 20% off TUNER CRATE using code "WRENCHON": bit.ly/28W8UvW
➥ Blake's Garage T-Shirts: Blakesgarage.bi...
$600 Brembo Brake upgrade
➥ACDelco 172-2587 GM Original Equipment Front Passenger Side Disc Brake Caliper Assembly geni.us/ecGMA [Amazon] $86.06
➥ACDelco 172-2586 GM Original Equipment Front Driver Side Disc Brake Caliper Assembly geni.us/D1eNO0M [Amazon] $81.17
➥ACDelco 18K1971X Professional Front Disc Brake Caliper Hardware Kit geni.us/JEezs [Amazon] $17.51
➥StopTech 125.47019 Premium Brake Rotor geni.us/6VRujC [Amazon] $70.39 + $12.99 Shipping X 2 = 166.76
➥ACDelco 17D1050M Professional Semi-Metallic Front Disc Brake Pad Set geni.us/BMUTl0 [Amazon] $34.69
➥www.ctsvbrakesw... $220.00
Car Products I use:
➥Chemical Guys EcoSmart-RU geni.us/cYA0j1Q [Amazon]
➥Chemical Guy Hybrid V7 Optical High Gloss Spray geni.us/b6oOz9r [Amazon]
➥Chemical Guys Diablo Gel Wheel and Rim Cleaner geni.us/mveVJiC [Amazon]
➥CarPro Reload Sealant Spray geni.us/aPAked [Amazon]
➥CarPro PERL Coat Plastic & Rubber geni.us/kJJC7 [Amazon]
➥Durafoam Contoured Large Tire Dressing Applicator geni.us/ael99K [Amazon]
➥Chemical Guys Lava Luminous Glow Infusion WAX geni.us/zgbvI5S [Amazon]
➥Chemical Guys Light Duty Clay Bar and Luber Synthetic Lubricant Kit
geni.us/wBQcygf [Amazon]
Camera Gear I use:
➥ Canon 70D geni.us/0PwNR [Amazon]
➥ Canon 17-40mm F/4 Lens geni.us/nN8f7vs [Amazon]
➥ Rode Video Mic Go geni.us/PzaQOv [Amazon]
➥ GoPro Hero 3 Black geni.us/xLKq0E [Amazon]
➥ Manfrotto 502 video head here geni.us/Be7l [Amazon]
➥ Rode Video Mic Go geni.us/PzaQOv [Amazon]
➥ Zoom H1 Handy Portable Digital Recorder geni.us/bISj [Amazon]
➥ Lapel Mic HUACAM YYPJ-01-1 geni.us/hJHwM [Amazon]
➥ ProMaster XC525 Red Tripod With Head geni.us/BGBEpp [Amazon]
Channel Art by Synq DZN Check out his Channel
➥ / improvings
➥ plus.google.co...
would there be any point in having the big mouth intake now as the standard box has been removed ?
Oh man heard that high pitch sound in my mishimoto intake once i did a cold start and installed the Turbosmart dualport had me worried af
your videos are good watching man. nice work, keep it up
Travis Power thanks Travis!
So you can have the ram air and an aftermarket intake. Also wouldn’t you want to keep the intake cover on to seal the air in there like you said in the ram air video
Wow crazy to see how much more secure the sensor sits in the intake in the black one, compared to the blue model. Kinda just wobbles around in mine.
+PubsWubs yeah this one was tight. Maybe put some electrical tape around it to snug it up.
I don't see a link to the impact driver :(
Hey man! Sorry for the unrelated to the RS question but on your Subaru WRX hatch- were your fenders rolled at all with that setup for those 18 x 9.5s? Also do you remember the offset?
Love your videos man, keep up the awesome work.
michael decouto +35 on 265/35R18 tire
Diggin the beard brother
Great install video Blake. So jealous of your quality.
instaBlaster
that matching color TSHIRT
Bao Duong where did he go....😉
anyone know if a bad cat converter and/or access port can blow up an engine. Mine did at 34,000 miles and Ford said I wiped the memory, it was over fueled and denied all my claims. Now on the 2nd engine, just over 1,000 miles under her belt and am getting the same errors and engine light coming on..."cat efficiency below normal", "random misfire"...etc?
Was the big mouth and sealed box not cutting it for him? Curious as it was only on for about 2 weeks
J_RuSty I had both products to install the same day. The bigmouth is still on the car just not sealed.
I'm guessing the 100% sealed box isn't all that important then been debating on getting a big mouth for mine as well
J_RuSty it was engineered on the sealed box concept. However it still will have benefits over the stock set up just maybe not as much as it would if it was sealed.
Nice video again Blake . Was there any reason as for having two differing air intake mods in a short space for the owner ? Witch one do you prefer ?
Liam Fitzpatrick yes, I filmed them the same day. He lives 2 hours away from me.
Nibbs= grommets & studs, or mounting posts. Much better technical terms than "things."
That blow by is worrying. I installed an AOS on my WRX for some piece of mind.
+Ryan Theriault yeah I put an oil catch can on this car but still it get quite a bit. On Brandon's RS we installed a new breather baffle and catch can.
Nice video. How much powa you adding?
cant reuse the velossa tech airbox seal
Hey Blake what are your thoughts on engine covers do they serve a purpose, I kind of think they just hold in heat.
Michael Dillon just for looks I know a lot of people just leave them in the garage.
Blake's Garage Thanks Man excellent videos love the attention to detail
what did the air in take do to the car? did it get more hp?
I love me some bitches.
Whats a coke bottle effect?
1:28 😳 That's a $50k pipe you just threw lol
TheBeardedMan wat
Almost every aftermarket intake claims 10-15 HP, my experience is it is usually BS. All you end up doing is wasting $400-$500, generate codes, and cause drive ability issues, because the sensors don't see the same sort of air flow.
The stock intake on this car already looks like it flows very well. Most likely this intake is a complete waste of time and money, oh and it could easily void your warranty, so there is that. Based on what I am seeing about the reliability of this car, you are definitely not gonna want to give Ford any excuse to void your warranty.
shut the fuck up all ready
I am just telling like it is, what are you doing? Say something useful, or fuck off.
you obvioisly dont know about the magnusson-moss warranty act. basically it states that no dealer or manufacturer can void a new car warranty except in gross negligence or abuse, they can only deny a claim. it also states that a dealer or manufacturer may not arbitrarily deny a warranty claim simply because aftermarket parts have been used or present. the part(s) must have caused or contributed to the cause for which the claim was sought. a dealer MUST troubleshoot, they cant just point and assume.
the way this car measures air isnt the same as say a wrx, this wont need a tune to compensate.
the rs infame is not limitting anything until maybe over 500 whp
do you need a tune after installing this?
+Nicolas Deragon nope not for an RS. ECU will adjust.
Was wiggling the pipe supposed to be a joke lol
Cullen Chase no, you have to do that as part of the install process.
All that money wasted on the Velossa Tech garbage only to completely do away with it in the end.
Danielle Koran it's still in the front of the car and hooked up. Just the stock air box piece was removed.
I agree with you, it negated the ram air block off plate and reduced the inlet air velocity in the process