DTF printing with EPSON SC F2100 printer...

HU
Miért fontos ez a megoldás:
- nem kell új nyomtatót vásárolni
- műszál, pamut, kevertszálas anyag mostantól nem számít
- 145C-150C a vasalási hőmérséklet, így a kényesebb anyagokra is megfelelő
- sport táska, sapka, széldzseki stb. nyomtatása is lehetséges
- kisebb minta esetén akár 6-8-10db nyomat egyidőben
- nem igényel előkezelést
ENG
Why is it an innovative solution?
- no need to buy a new printer
- for polyesther, cotton, mixed fabrics
- pressing temp is 145C-150C, suitable for sensitive fabrics
- printing sport bags, hats, windcheater is also possible
- even 6-8-10 small printings can be made at the same time
- no need of pretreatment

[@gfdggdfgdgf]

A few days ago I received film and hot melt powder and from the first tests with my f2100 the results are fantastic. Colors are stronger because the ink doesn't sink into the fabric, I can use less white ink but the results are better than with dtg and in general workflow is much faster and on top of that you can work in advance and keep transfers ready to press.
The most common question with dtf seems to be how does the transfer feel. I'd say somewhere between dtg and printed foil. With a low white ink setting it's closer to dtg, with a high/thick white ink layer it's closer to foil. Pressing again for a few seconds after removing the transfer sheet makes a difference as well, smooth Teflon sheets give a more glossy finish, rough Teflon sheets and baking paper gives a matte finish.

[@frankp.7807]

did you use DTG ink?

[@VinaykanthK]

invest your time on ICC profiling. it's a game changer. with default profile its hard to produce good blues and greens

[@jennifergreinschgl8618]

Thank you for this amazing video! Just wondering, at what temperature is the heat pistol and how long do you use it for?

[@3dprint26]

Hi I like ur video

[@urianlopez2513]

Hey have a questions do any of your DTF transfers come out with an oily residue and if so how did you fix that issue.

[@000blackapple000]

Can you pls make a new video explaining step by step showing the settings on the screen because in this video is a little hard to see

[@auldzbuzz3374]

I never thought you can use Mac to do DTG or DTF. May I know what software are you using?

[@viktorkeszeg8527]

Hello SPS! Tetszik ez az új megoldás. A fóliákat lehetséges több példányban előkészíteni és tárolni, esetleg szállítani úgy, hogy nem ragadnak össze?

[@SPSPrintingSolutionKftBudapest]

Kedves Viktor! A fóliákat előnyomtathatja és tárolhatja a ragasztó por hőkezelése után. Szállítását nyomtatottan nem próbáltuk, de megfelelő szállítódoboz esetében úgy gondoljuk, ez is lehetséges.

[@auldzbuzz3374]

Hello. Soha nem gondoltam volna, hogy Mac-et használhatsz DTG vagy DTF. Megtudhatom milyen szoftvert használsz?

[@savagelife50]

can u do this in english please

[@arturnowak9562]

Co to za papier

[@artscreenofhertfordshire4126]

I have the knowledge of how this is done and GC does not work well..

[@Public_]

Hi what print media is that paper? where to get it from. Many thanks

[@SPSPrintingSolutionKftBudapest]

Hello, it is a special DTF foil available in A3 and A4 sizes.

[@3dprint26]

Please share Dtf printing settings

[@SPSPrintingSolutionKftBudapest]

Please watch the video for the settings.

[@jeannestucker7618]

Can this b3 translated to English?

[@SPSPrintingSolutionKftBudapest]

Yes will be subtitled in English by next week.

[@arturnowak9562]

Co to za drukarka

[@studio68c14]

i have epson f2000 can i use for DTF

[@SPSPrintingSolutionKftBudapest]

Yes!

[@AhMeDFawwazALI]

Hello . Pls film type .. or link of it to buy . Thanks

[@SPSPrintingSolutionKftBudapest]

Hello, in case you need it in Europe we can provide it otherwise you need to find the local distributor.

[@AhMeDFawwazALI]

@@SPSPrintingSolutionKftBudapest hi dear. In Germany 🇩🇪

[@SPSPrintingSolutionKftBudapest]

Please drop an e-mail to [e-mail] with your enquiry. Thank you!

[@infinibusinesssolution811]

Hello, are you using DTG ink or DTF ink?

[@gfdggdfgdgf]

I guess regular dtg ink, it's similar/the same

[@SPSPrintingSolutionKftBudapest]

Hello, we used original Epson DTG ink.

[@Learninghowtorebuild]

@@SPSPrintingSolutionKftBudapest where can i buy ink ?

[@eddienaicker4885]

Can we use dtg ink

[@abhishekdas4814]

@@eddienaicker4885 yes you can i am also using dtg ink

[@TheArpits]

But why would you do that?

[@SPSPrintingSolutionKftBudapest]

Advanteges:
- no need to buy a new printer
- for polyesther, cotton, mixed fabrics
- pressing temp is 145C-150C, suitable for sensitive fabrics
- printing sport bags, hats, windcheater is also possible
- even 6-8-10 small printings can be made at the same time
- no need of pretreatment

[@AhMeDFawwazALI]

And no need pretreatment 🤗

[@gfdggdfgdgf]

And you'prepare transfers in advance, easier placement, stronger colors

[@gfdggdfgdgf]

Too bad garment creator doesn't seem to be able to print the layers in reverse order, as far as I can see it's a 2 step printing process (print 2 different files).
Also: bonus points for having total Commander installed on your computer.