3D One Hybrid on Foam Pads

[@American0313]

Got a gallon of this on the way, anxious to try it out

[@amazed6161]

really without even trying out smaller bottle..

[@3DCarCare]

nice.

[@OGCONSUMER]

Wow ur a dummy

[@American0313]

my experience is high volume working dealer trades, auction cars, used cars, body shop finals etc carry on snowflake

[@MasterKrzystar]

Your products are just mindblowing! I first tried HD SPEED and I was blown away. Very good polishing and not that much fillers. Great shine from montan wax. Than 3D ONE...especially on panels like aluminum, plastic, carbon fiber where the heat is not dispersed...3d one is not 'melting' or dissapearing, or drying. totally esy to wipe off. mindblowing shine, and then checking with Gtechniq panel wipe, which is really unforgiving...nothing! Zero difference! the same intensity the same shine. Respect :)

[@J1Z06]

I tried this last fall on My best bud’s BMW. I used a 3401, Chemical Guys white pad. It did a nice job. Car pro eraser followed this along with soft99 to finish things off. I’ll use it again.

[@davescott9062]

This has become my favorite/go to polish, it works amazing on gel coat as well.

[@autovageris]

I like this polishing paste

[@unitymixer]

Hope to have that available in Canada soon... !!!

[@richardchaplinskycd9046]

Ken Co Products, Burlington ON. 3D distributor

[@mizantlaveracruz]

Excelente producto Donald,dejo mi camioneta Windstar 99 luciendo como nueva,super recomendable !!!!

[@davidmedina7192]

Donald- I have a semi I'm looking for some correction and polishing not for perfection if I use the k156 medium pad with 3D One will I achieve some correction with a finished glossy look, with no micro maring? I will be using a rotary polisher. Thank you I've been a fan of 3D for years now.

[@3DCarCare]

You would need to try it out on a small area first, to see if you are getting any micro-marring. A lot of it depends on the hardness of the clear. You should get good results with a medium pad and 3D ONE.

[@davidmedina7192]

@@3DCarCare thanks!

[@tommartin1223]

Mine comes today!

[@3DCarCare]

nice!

[@matiusteddyc.856]

On soft paint (toyota fortuner vrz) it's really a struggle to wipe off

[@PeteyMcSavage]

I think it good it hazes with heavy cutting pads like a normal compound you folk need to make some ceramic coating I wanna buy some made in America high quality and good value coatings. That would be something

[@3DCarCare]

Please come to talk to us at SEMA this year!

[@PeteyMcSavage]

Sounds like a hint

[@MIKEYSREVIEWS]

Looks promising can't wait!

[@3DCarCare]

It is now available

[@kevintouch7602]

What has more cut 3d aca 520 or 3d one?

[@danlc95]

One

[@qwikss7522]

Pretty oily upon removal. Not saying fillers, but definitely need an IPA wipe to remove those oils to reveal true finish.

[@3DCarCare]

There are no fillers in this product.

[@3DCarCare]

Try using less product, you may have better results.

[@OGCONSUMER]

QwikSS
Always IPA after compounding for your lsp to stick to surface and longevity of lsp

[@qwikss7522]

OGCONSUMER I’m aware of that and I’m not saying there’s any fillers. My main point is that ONE is an oily polish, generally speaking. Even when using little. Not a bad thing, it’s just an IPA wipe is needed to remove those oils so you can see the true finish.

[@danlc95]

@@OGCONSUMER - You only need to do that if the lsp manufacturer recommends it.
In other cases, any "glazing" left behind actually aids in bonding.
www.autogeekonline.net/forum/hot-topics-and-frequently-asked-questions/31186-miscible-immiscible-wax-paint-sealant-bonding.html

[@arminjeandost]

thank you mr. donald..

[@tommartin1223]

Love 3d 1

[@1GreatLake]

Could this cause haze using it with a chemical guys orange hex pad ?

[@danlc95]

Probably not, but it depends a lot on your paint hardness.
That pad once moist with product is actually very gentle. You'd be more at risk with the green, because it still is coarse with product on it.

[@rhodycars6058]

What pad would you recommend to use as a All in one?

[@danlc95]

I like to use a pad similar to their light purple polishing pad.
The ones I use are the yellow or dark blue Buff and Shine.
The Buff and Shine Uro-Fiber Finisher (all black fibers) pad is also very good in that capacity.

[@Nikosmykoniaths]

will this product come to Australia ? i would love to give it a go to the shop

[@glumdogtrillionaire]

Nikos mykoniaths 4 weeks from now is first stock, straight from the Aus distributors mouth.

[@KdAB-mo4hv]

Do you have a part number for the product? My jobber has no idea about it. Thank you

[@sheridanadams]

Kd1979 AB 400 so a 32 oz is 400oz32

[@garcia5986]

hi did you know if 3d one have filler?

[@Bull1the1Great]

It doesn't

[@88krazie]

The hood still looks terrible, to much hazing, why is that?

[@3DCarCare]

Maybe you missed the images of how the hood looked before the process?

[@frandanco6361]

@@3DCarCare Notice how he did not answer your question....

[@walkertongdee]

not a good product too expensive iphone syndrome

[@Kirbysbelt]

I don't have hazing issues with it. Apex detail has an excellent tutorial on it. My advice is to go there.

[@broccolihart1]

He looks like Matthew McConaughey during the Covid-19 pandemic of 2020.

[@vladimirmalenin967]

Здравствуйте. Я из России. Сибирь. Купил эту пасту. Учусь ей пользоваться)

[@3DCarCare]

Дайте нам знать, как вам это нравится. - Янси

[@vladimirmalenin967]

@@3DCarCare очень понравилось. Оранжевый мех фирмы "Мирка" и 3d one. Второй этап : чёрный диск и 3d one. Зеркало получилось

[@glowaxbelgium4257]

Menserna 2500 way better

[@javiibbstorm]

I b hha

[@walkertongdee]

3M wannabees at three times the price what's wrong with this picture 3M is already too expensive...

[@elvispjetrovic]

Great product .. terrible video sorry