Useless channel. How do you people watch this? He doesn't know how to do ANY of that, and he never showed any sketch or building instructions. Zero level channel with terrible voice.
@@rustfiber so people couldnt make arduino projects before 3d printing? It's obviously a very useful way to make projects but the youtuber could mention more projects that make you diy in a different way than this much printer reliance
I had a powered skateboard, purchased it not home built. Was running the dog with it. He saw a cat on left side of board while I was facing right. I was lucky the surgeon was talented and my pain meds are the good stuff.
Entertaining videos but, let's face it, only a VERY small percentage of advanced DIYers on large budgets have the resources available to accomplish and complete these particular projects. I don't, certainly, yet I have been an avid uController/Adruino project designer and builder for over 10 years.
I disagree. Yes, you would firstly need to have some components and an arduino + some knowledge and skill. However, you can do a lot of things just with a breadboard and simple components with the arduino. This year for secret santa, I made a save that needed to be opened with a potential meter. With the percentage of it being displayed on a 4x7 segment display that also displays a counter in seconds how quickly the 2 digit code had to be given with the potential meter. When the code would be correct, a servo would turn and unlock a cardboard box and reveal the present.
WARNING: for high power battery-operated devices it's not recommended to use a diy device; yesterday a whole family was burnt to death by a faulty battery operated scooter that was left charging overnight and at some point it ignited the whole apartment, it was a tragedy in Buenos Aires Argentina.So best advice is stick to officially approved devices along with the proper charge method and electrical instalation in working order. As of today it's suspected the weight of the person ended up puncturing a battery cell that when recharged caught fire and the flames spread to nearby clothing and plastics causing the tragedy.
I think it's safe to say that If you're making ANYTHING with batteries or electricity you MUST learn the dangers associated with them and how to prevent failure
That sounds like a horrible freak accident. But the RC community messes with high power batteries all the time. Plus such a tragedy could technically happen with a small battery as well. All you need is an ignition source. It could have happened with a Galaxy Note 7 back in the day.
Hola soy nuevo por aquí, me gustaría saber si puedes estudiar un proyecto que tengo en mente. Se trata sobre un dispositivo que funcione como localización
Not everyone owns a 3d printer,to be honest 3/4 of the projects needs a 3D printer here,RIP for those doesnt have a 3D printer.Well there is not only projects that can be performed witht the help 3D printers but also with some basic knowlegde of ARDUINO
This is vishnu I want to make a self watering plant Using moister sensor ,arduino, 7 segment display and pump But I am a beginner in coding arduino In the project moister sensor senses the moister and display on 7 segment and in display 1 defines no water 2 defines 20% of water 3 defines 45% of water 4 defines 75% of water and 5 defines 100% of water 5 means there is more water,4 means there is enough water, 3 means less water ,2 means very less water if it shows 2 the pump must pump for certain time and stop incase moister was very very low and water was over and shows 1 the buozzer should on Kindly can you help me to write the code which perform this process and in connections of sensor etc
All in one Arduino Kit (our pick):- Amazon: amzn.to/35a5jIv The only Raspberry Pi kit you need(our pick):- Amazon: amzn.to/3Ikabcn ESP8266 Weather Station Kit:- USA: amzn.to/3nQwcIn Best ESP32 Kit(our pick):- USA: amzn.to/3xn6tua
lol you don't need to buy a controller when you could build your own. New Controller is 20 dollars. And created with adrouino is much more expensive and useless for games...
Want to learn Electronics the easy way? Then check out our course:
courses.etechnophiles.com/courses/ABC-of-Everyday-Electronics
Useless channel.
How do you people watch this? He doesn't know how to do ANY of that, and he never showed any sketch or building instructions.
Zero level channel with terrible voice.
Finally, some projects that aren't the usual "sensor demos"
Yeah. That true
It's cool but... All i hear is "3D printed this, 3D printed that"...
Well ya that's part of the DIY. You wanna buy the stuff then just buy a completed kit
@@rustfiber so people couldnt make arduino projects before 3d printing?
It's obviously a very useful way to make projects but the youtuber could mention more projects that make you diy in a different way than this much printer reliance
Lol he most likely can't even build a 3d printer
Well he needs to have a 3d printer do he can do the parts of the project
perfectly
@@rustfiber🤡☝️
I made the spider robot, thanks for the feature! I’ve got more projects like it on my channel if anyones interested
I'm going to see it
You have great projects on your channel... Underrated!
I had a powered skateboard, purchased it not home built. Was running the dog with it. He saw a cat on left side of board while I was facing right. I was lucky the surgeon was talented and my pain meds are the good stuff.
TNice tutorials is one of the best tutorials of ANYTNice tutorialNG that I've ever watched in my life! Thank you so much!
had a stroke trying to read this
thanks, it actually let me through so i could download it.
totally gonna do the led light clock, you can do it with normal led strips I bet it's be easy
Where do I get complete tutorials of the projects I like?
Why wasn’t all the music used in the video mentioned in the description?
Entertaining videos but, let's face it, only a VERY small percentage of advanced DIYers on large budgets have the resources available to accomplish and complete these particular projects. I don't, certainly, yet I have been an avid uController/Adruino project designer and builder for over 10 years.
I disagree. Yes, you would firstly need to have some components and an arduino + some knowledge and skill. However, you can do a lot of things just with a breadboard and simple components with the arduino. This year for secret santa, I made a save that needed to be opened with a potential meter. With the percentage of it being displayed on a 4x7 segment display that also displays a counter in seconds how quickly the 2 digit code had to be given with the potential meter. When the code would be correct, a servo would turn and unlock a cardboard box and reveal the present.
How can you be an "advanced DIYer" without having these parts lying around?
WARNING: for high power battery-operated devices it's not recommended to use a diy device; yesterday a whole family was burnt to death by a faulty battery operated scooter that was left charging overnight and at some point it ignited the whole apartment, it was a tragedy in Buenos Aires Argentina.So best advice is stick to officially approved devices along with the proper charge method and electrical instalation in working order.
As of today it's suspected the weight of the person ended up puncturing a battery cell that when recharged caught fire and the flames spread to nearby clothing and plastics causing the tragedy.
that honestly horrible but doesnt have to do with arduino community that much
I think it's safe to say that If you're making ANYTHING with batteries or electricity you MUST learn the dangers associated with them and how to prevent failure
That sounds like a horrible freak accident. But the RC community messes with high power batteries all the time. Plus such a tragedy could technically happen with a small battery as well. All you need is an ignition source. It could have happened with a Galaxy Note 7 back in the day.
Love the metal detector robot
Thanks.
Great project
Which programming language you are using for these
Can you make project of temperature and humidity controller by arduino uno?
Hola soy nuevo por aquí, me gustaría saber si puedes estudiar un proyecto que tengo en mente. Se trata sobre un dispositivo que funcione como localización
Not everyone owns a 3d printer,to be honest 3/4 of the projects needs a 3D printer here,RIP for those doesnt have a 3D printer.Well there is not only projects that can be performed witht the help 3D printers but also with some basic knowlegde of ARDUINO
why buy altium when there is kicad?
I want to make the mechanical 7 segment display, could you help me with the code and kind of servomotors etc.?
7:12 bro what 😂😂😂
10 and 9
These robots are swell… 👍
Good idea
I'll allow it.
Do they also work in 2023?
Yes all should work just follow instructions, if they could do it in 2022 then you can def do it in 2023
@@encodablelikesramen3805 I meant it as a joke because it said 2022 in the title🤣🤣
@@thebestminecraftplayerfrom376 oh lmao aigh
No, the 2023 patch killed most of these. We're waiting for the modders to push updates.
nah they expired better luck next time ig
Who can assist me with lecture attendance system for university students?
that electric longboard is completely f'd as soon as it rains tho
you amazing big idea well well
A machine has the lie on the gap of the machinery unit called GPS
Or grp that unit 7 mean power apply.
actual time went into that pos necklace lol
This is vishnu
I want to make a self watering plant
Using moister sensor ,arduino, 7 segment display and pump
But I am a beginner in coding arduino
In the project moister sensor senses the moister and display on 7 segment and in display 1 defines no water 2 defines 20% of water 3 defines 45% of water 4 defines 75% of water and 5 defines 100% of water 5 means there is more water,4 means there is enough water, 3 means less water ,2 means very less water if it shows 2 the pump must pump for certain time and stop incase moister was very very low and water was over and shows 1 the buozzer should on
Kindly can you help me to write the code which perform this process and in connections of sensor etc
This is Vishnu
No.
ask chatgpt idk c++ either but chatgpt writes all my sketches for me
You can reply to my comment if you need further help
Do one for 2023
I love lil nas X
All in one Arduino Kit (our pick):-
Amazon: amzn.to/35a5jIv
The only Raspberry Pi kit you need(our pick):-
Amazon: amzn.to/3Ikabcn
ESP8266 Weather Station Kit:-
USA: amzn.to/3nQwcIn
Best ESP32 Kit(our pick):-
USA: amzn.to/3xn6tua
Microchip PIC12F675 8 pin,8 bit microcontroller is more inexpensive for this proyects!
THAT'S NOT HOW YOU SOLDER!!... 😱
That's now NOT to solder.......
or. dont do what others do. do what you need
subtle indian accent, respectable effort tho
rofl
Indians always have the name "John" for some reason 💀
Tapak
hey guys just looking the idea for climate change robot...can someone help me ;) thx in advance...
A robot that stops climate change? A T-800 oughta do the job
honestly less than 1% viewer will do that complicated project. 99% only watching.
Arduino “uknow” 😂
Spanish plis
2
These fucking AI voices are getting insane.
Toys, nothing really serious. 👎
So arduino is useless really
Useless
Disliked 👎
Who
Does anybody remember Buck Rogers?
Italia es el país más bello e importante del mundo
lol you don't need to buy a controller when you could build your own. New Controller is 20 dollars. And created with adrouino is much more expensive and useless for games...
top of useless stuff