How To: GE Tub Bearing Washer WH2X1197
HTML-код
- Опубликовано: 8 сен 2024
- How To Replace: GE Tub Bearing Washer WH2X1197 www.appliancepa...
Symptoms: Washer wore out; hearing tub bearing wearing on transmission
Tools: Torx 20 screwdriver, putty knife, 1/4” nut driver, 5/16” nut driver, wrench with long extension and 7/16” socket, spanner wrench with adapter, hammer, WD-40, flathead screwdriver, needle nose pliers, broom handle, wire cutter, 1/2” socket with ratchet
This GE made Washer Tub Bearing Washer replaces the following older part numbers on General Electric, Hotpoint, RCA, Sears and Kenmore Washers: 279135, WH02X1197.
Buy the new Washer Tub Bearing Washer WH2X1197 here: www.appliancepa...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros
Anybody who is attempting this repair on a washing machine that is years old should be aware that you're going to run into pieces that are rusted together and are not going to want to come apart as easily as shown on this video. I used to be a contractor and I'm pretty good at DIY projects. I did this repair on a 20 plus-year-old washer. I nearly gave up. One key is having the correct tool to get that reverse threaded nut off. Also, have plenty of WD-40 and 80 grit sandpaper around
Thank you for those tips!
For those that are having trouble removing the old tub bushings. I was able to take the new bushing and find a socket slightly smaller and place a socket extension in the socket and use a hammer to tap on the extension and drive out the old bushing. I also recommend ordering the bushing, tub seal and split bushing. As I broke the split bushing and the seal had to be replaced along with the tub bushing. I also ordered the nut wrench as it was on $10.
Thanks for the video; forewarned is forearmed. The washer is a poor design by GE (my employer, by the way). In a good design, a part that commonly fails is inexpensive and easy to replace. Parts that are a pain to replace should be of high quality, making their failure rare.
+Firstname Lastname Hope the video helped you get the washer fixed!
Firstname Lastname preach.
wow this hub nut is a tough cookie to get off!
They can be on there pretty good at times, hope you were able to get the washer fixed!
+AppliancePartsPros I was got it off today.
Awesome, glad you got it!
I wish my coupler came off that easy. I ended up having to break it off with a screwdriver and buy a new one.
+ssadiq1000 Yes sometimes they can be stuck pretty good. Glad you were able to get the coupler off!
Cuz you didn’t unbolt it you idiot
Hell of a job ain't it? Good job.
Thanks, Glad you liked the video!
WCSE4230A0MM agitate ok but wont spin, motor check ok, turn transmition pulley by hand, turn ok in agitate direction, but only turn about 1/4 turn in spin direction then lockup wont turn any more, appreciate any help?
9:38 never understood the overflow tube. What good is it if it is not connected to anything? End of the day it overflows on the floor whether you have the tube or not.
without the overflow tube, the water would just flow over the top of the tub, and onto the electrical connections and electric motor - the tube directs overflow to the back corner of the machine, preventing that electrical hazard.
@@thadthompson2264 very good points! Either way you are screwed! Did not think about it getting all over the motor
not used the Anti-seize compaund???? WHY?
You should not need grease on this.
@5:58 on my hotpoint it is very oily there(getting into tub and into clothes) and i suspect its that top shaft seal,is there any way to replace that without having to pull and replace the whole transmission?
What is the model number of your washer and we can look into this for you.
@@appliancepartspros htwp1000m1ww
Is it part number AP5645738 that you are looking for? Below is the link to that part so you can look at it.
www.appliancepartspros.com/ge-seal-tub-wh02x10383-ap5645738.html
i dont think its the tub seal(that would cause water to leak past the tub into the bottom right?)i think its the upper shaft seal (right under the splines for the agitator)
Why replace the washer but not the bearing?
Where i buy washel?
What is the model number of your washer? What is it that you are looking for?
Jesus Christ!...Just buy a whirlpool direct drive washer.
We offer repair help with those too! :)