Quart by ChiBatterySystems: Installation Guide [UPDATED 2022]
HTML-код
- Опубликовано: 19 окт 2024
- Follow along with Chibatterysystems Owner Bara Jabali as he shows you how to install the updated Quart battery upgrade for the Onewheel Pint. In this video you will learn how to dissemble and reassemble your pint to install your upgrade.
The Quart battery upgrade can be purchased here: chibatterysyst...
Please note the Quart is still only compatible with hardware 5314/Software Gemini 5050 and prior.
If you want to have your Quart professionally installed for free please reach out to our support team. We are happy to take your battery and housing in at anytime. support.chibat...
The tip for cutting the gasket/o-ring is MAGIC! I had sooo much trouble putting mine back in ha ha!
I fucking love the OW community. The dedication for something like this to exist is nuts
best decision i ever made was installing a quart in my og pint
mines pending rn how long did it take for them to ship for you?
@@OldTownShreddermine took 2 1/2 weeks
@@OldTownShredderMine took 3 weeks, have you got yours in yet
To anyone else that tries to put your metal plate for the box back on and runs into “this thing absolutely will not fit! What the heck???”:
- make sure the BMS plastic cover was cut properly and is not pinching any wires
- the quart IS a MUCH tighter fit and the lid will not sit flat if you rest it on the box like the stock battery. You have to pay attention where they say “get all the screws STARTED first and THEN torque them down. It will feel like super bad and weird doing it but if you do it that way it WILL end up sitting in there okay. I had a legit 3mm gap between the lid and box before I got them all tightened down.
Running into that problem rn, thanks
I'm contemplating getting this for my Pint, but how do you check battery levels with the new battery? I assume that both the light indicator on the board and the app won't be accurate anymore
On the app, you can see the voltage for the battery as well as the percentage. The battery comes with a little chart that says what voltage is which percentage, for example if the app says 62.25v your battery is full. Chibatterysystems also sells a battery indicator that you can attatch to your pint
@@andrewmarin3941Not anymore lol
Will the new update mess with the board with this installed?
saw you guys even swapped a. GT!!! hope by the time my battery of my gt dies we are able to make the CBGT :D
Any tips to make the app tell you an accurate percentage of the new battery? Or that's still not possible? :C
Check the voltage
Can you take the pint with the quart on a plane
I can't get the metal plate to close.
(edit: i sanded down some of the plastic now it fits.)
I heard Future Motion is cracking down pretty hard on upgrades. Is this still good and compatible on the Pint? I heard that messing with the battery can brick the board…
That’s on the GT
hey was just wondering when ill be able to purchase a quart with an updated firmware :/
there are ways to rollback to a compatible firmware
Hey guys, i have a good question. I have this Quart battery and i have stored the OW for a while with a good charge during my wife pregnancy so i haven’t had time to ride. But as soon as i got back on the OW. I fully charge and few miles later it seemed the battery was already dying on me in just half of the battery as if Im back to a stock battery. It seem the Quart is not holding its charge anymore? What do you guys think has happened? Thanks all!!
If you updated to a newer firmware you've been locked out of your extra range
@@haymose_ this happened way before i updated the app. What could it be?
How Do You Check For Software Of Your OneWheel? ❤
In your app under diagnostics
How do i tell if my board has the right firmware or the 5314/5050 Gemini ?
the app
How do you check the real battery prescrntage of the onewheel after the batter swap since we can no longer see the battery voltage in the app anymore
They sell a separate indicator
Because my Onewheel fender screw is stripped and I would by this if I could do it
Will the battery meter on the front footpad still be accurate after the upgrade?
No.
nope, gotta check voltage
Do u need to take the fender off
Yep
The fender is the easiest part to remove, what is the issue?
What is the Mah of yours vs stock?
4250 mAh
Stock: 3500 mAh
Does this void the warrenty
Yes
I’ve heard that disconnecting the battery cable will automatically brick it. Is this true?
inwish we could get more answers i’ve been trying to find this out myself
I've read that this is the case with the GT
If you have the GT, it will brick the board, but the Pint won't brick.
@@Mike_Jones281 Are you sure with the pint x it is safe to disconnect the battery?
@Joka.3000 Not with the Pint X.
To anyone wondering about buying one of these. I would not recommend it. They are of poor quality. I've had one and after about 2,000 miles I've already lost 3.5 miles. These are not worth the money they are asking. I hope I save someone else money.
2000 miles is a lot, I’d consider it solid vs just getting the factory replacement
Plus losing 3.5 miles is still more range than the stock battery
Buying a Pint and rewheeling it is the way to go.
@@northuniverse what rewheeling
@@TheDaviro47 someone has uploaded a copy of rewheel already