"I thought about it when I was laying in bed this morning and I didn't write it down." Wow, I feel your pain. I think I have said that at least two or a thousand times in my life.
Love that car, my first time on the channel, looks like ya had a lot of help building such a beautiful prize. Now how about watching this yourself, 1st it fired right off so I expect you have an electric fuel pump 2nd you pumped it a ton, then it fired and run out of fuel. "did you shut it off?" No? Did you choke it? No! Why not? It still has carbs . "let me get my meter " for what? Will that meter calibrate fuel? Next you checked trans fluid, Engine supposed to be running to get the right reading. This may be your last Hurrah but not your first rodeo. Mr. Dontov would be very proud . I'm sure Zora is looking down on you wanting to shake your hand. That is one beautiful piece now try to get the lift set up a little closer to the front axle . Let me get a towel, that linkage is hot ! Now you know why they had vaper lock problems in the day.
Cam sounds solid 👌 also sounds like it would like a little more timing. I wouldn't get hung up on a should-be timing number the dynamics of every engine is different and people tend to get hung on static numbers
Looks as though he is not planning hood sides - coil over mounts also would be a problem for sides. But it will look great with those valve covers out on the open.
Seems like waste of money installing an Ardun conversion kit on top of a 1932 block with only 3 main bearings holding it together....it is a nice looking car though...
Those Ardun heads makes that flathead sound and look sweet, that’s a beautiful piece of art.
"I thought about it when I was laying in bed this morning and I didn't write it down." Wow, I feel your pain. I think I have said that at least two or a thousand times in my life.
I love watching experienced ole heads work you can learn so much with laughter.
Ole Duntov designed some great heads. I know a guy with a 40 Ford Coupe with V8, standard trans and glass packs that sounds like a love song.
looks great with factory roof not chopped to sunglasses
The process of doing that to a flathead is amazing.
It sounds good.
Super quality build guys . I agree though the yellow springs draw the eye to much.
Sounds great boys, what a ride!
Well you kids are sure havin' fun. But with the ARDUN OHV conversion, it's time to stop calling it a flathead.
This was brilliant - just like me and my best mate 😅
Very classy build....one recommendation, drop the yellow paint on the springs. It's a bit of a distraction from your build.
I remember seeing 1/4 speed double lobe camshafts in 50s @ 60 hot rod magazine. Including the larger cam sprocket / gear
Looks and sounds great
Love that car, my first time on the channel, looks like ya had a lot of help building such a beautiful prize. Now how about watching this yourself, 1st it fired right off so I expect you have an electric fuel pump 2nd you pumped it a ton, then it fired and run out of fuel. "did you shut it off?" No? Did you choke it? No! Why not? It still has carbs . "let me get my meter " for what? Will that meter calibrate fuel? Next you checked trans fluid, Engine supposed to be running to get the right reading. This may be your last Hurrah but not your first rodeo. Mr. Dontov would be very proud . I'm sure Zora is looking down on you wanting to shake your hand. That is one beautiful piece now try to get the lift set up a little closer to the front axle . Let me get a towel, that linkage is hot ! Now you know why they had vaper lock problems in the day.
Boy yer smart.
Cam sounds solid 👌 also sounds like it would like a little more timing. I wouldn't get hung up on a should-be timing number the dynamics of every engine is different and people tend to get hung on static numbers
Looks like you may need a water pump riser, to get the fan centerd
I like the manual water temp gauges for that reason and that's all, I install older vehicles.
It must of been the blinker fluid was running out of the steering column LOL!!!
Sounds pretty nice! Running the engine in a closed space is unhealthy!!
The Picaso of Flatheads no more... @ $25,000 plus?
That's one sweet Ford. Sounds healthy. Solid lifters?
Kool Beanz......haven't seen ya on the HAMB lately!
Looks so cool 👍 but that Fram filter 😆 seriously though nice car!
La belleza del flathead es justamente eso,las cabezas planas,cuál es el sentido de por válvulas a la cabeza?
same first time beautiful car
I think that engine would look Better in Mike's car. And m
00 n approves it
when you try to put the grill shell on I think you will find it won't fit unless you cut the front corners off and re weld them
Did you say “cavorting in DC? If so what years would that have been?
I’m so sad when I see billet tilt columns in a car like that. Oh well.
You need to have the car running when you check the trans fluid level, and it sounds like it needs the rockers adjusted
Not to check if there is fluid in the trans you don't
I see a HUGE mistake
That FRAM filter.
Why have the carburetors on there if you don't want to run it like that
The lifters or rockers are really noisy. Maybe you have not adjusted the rockers after a heat cycle? Sounds like a diesel. Beautiful car.
Looks as though he is not planning hood sides - coil over mounts also would be a problem for sides. But it will look great with those valve covers out on the open.
What rockers? Its a flat head, the adjuster is on the lifter
@@connorarnold9362 - It's OHV hemi now...
BuzzLOLOL Ohhhhh alright my bad
Solid lifters so will be making some noise...
Grumpy old guy
Seems like waste of money installing an Ardun conversion kit on top of a 1932 block with only 3 main bearings holding it together....it is a nice looking car though...
Isn't that all the flattys have,3 mains?
A flathead made to look like a hemi?
Ardun hemi OHV converted...
Somehow the oil came out of the coloum 😆
Please put antifreeze inside the radiator
I keep trying to get a look at that white race car. Meanwhile this guy is trying to diagnose a leaky steering column.
Not a hot rod motor my ass you better put some water or antifreeze in it before you cook them main bearings out of it
Sure doesn't look like any Flathead that I've ever seen and I have seen a lot of them
Yeah, it's now an OHV hemi...
That’s not a flathead