Very good logical troubleshooting. Apparently not every IC fails in a way that shows as a short or open circuit at the interface. Very educational, thank you!
It was still working somewhat so no complete shorts. It could been an odd resistor or cap I suppose but those DAP053 seem to be fragile. Thanks for stopping by!
That was an easy one, but also a really weird one. If I had taken a look at it I would probably have needed to get something to put a load on it. Thanks for the video, another interesting one to watch.
@@ToltecMerc I will, but I’m probably going to wait for prices to come down, perhaps they will when another model comes out later this year. It’s difficult to break even and not over spend on PS5s as they generally go for the same price broken as they are new in stores even though they’re now in stock just about everywhere. I’m doing a lot better with the PS4 Pros while they’re still relevant. I have a no power PS4 Pro on the way. I have an extra supply for it if that’s what it is.
Have a PSU with a similar issue were it power cycles under load after the transformer was put back on. Not sure if powering on without a transformer broke it but with these repair vidoes worth trying to fix again.
Very educational video, I’m following your YT channel to learn more and more about repairing A dump question, the blue multimeter was on AC or DC volts?
Thank you! No, I only started working on consoles about 4 years ago. Before that, I would just tinker with building different circuits for my work or myself. I wasn't really repair focused until I found a way to have fun and make a little money while doing it by repairing consoles.
@@mm0077 it is the Mega-Idea 20W which is the Qianli Nano soldering station. I like it ok. I use the large knife tip mostly. Only really useful for small jobs. Not a lot of thermal ability.
Man I really love your content, interesting and educational all the time. After that video, I have a request for you, maybe it's something you like to pick up. The DAP053 seems to be hard to come by at the moment. In a tweet I picked up someone who claimed the DAP053 is just a relabeled TEA2016AAT. I'm not in a position to judge about that, but maybe you could take a look at that claim from a professional point of view?
Wow again you are really amazing 👏 master of the master professional electronics engineer 👃 👏 🙌 amazing 👏 how can do this you should be rocket science 😀 😄 😊 😉 Well done my friend and happy easter from me from London mmmmmmm😊
Very good logical troubleshooting. Apparently not every IC fails in a way that shows as a short or open circuit at the interface. Very educational, thank you!
It was still working somewhat so no complete shorts. It could been an odd resistor or cap I suppose but those DAP053 seem to be fragile. Thanks for stopping by!
Cool videos, i bet you inspire alot of people, keep'em comin 👍👍
Thank you! More to come!
The much better behaviour with Q34 removed would have pushed me into a shutdown rabbit hole. Nice one!
It was odd but I knew the voltage should have been good with Q34 removed and it wasn't. Thanks for watching and commenting!
Hello my friend I love your work keep it up you're doing great.You're a very smart man to figure out how the circuits work on those power supply's
Thank you so much! That’s very kind of you. I’m glad you enjoy my videos.
@@ToltecMerc You're so welcome. You make it look so easy
That was an easy one, but also a really weird one. If I had taken a look at it I would probably have needed to get something to put a load on it. Thanks for the video, another interesting one to watch.
It wasn't too bad. Thanks for watching and let me know if you get any more.
@@ToltecMerc I will, but I’m probably going to wait for prices to come down, perhaps they will when another model comes out later this year. It’s difficult to break even and not over spend on PS5s as they generally go for the same price broken as they are new in stores even though they’re now in stock just about everywhere. I’m doing a lot better with the PS4 Pros while they’re still relevant.
I have a no power PS4 Pro on the way. I have an extra supply for it if that’s what it is.
Absolutely great! Interesting problem. Thank you. I enjoyed it a lot.
Glad you enjoyed it!
Greta job and educational as always
I am glad you enjoyed!
Amazing work man‼️💯👊🏾
Thanks so much! I appreciate that!
Good job mate 👍
Thank you! Cheers!
Thanks again Master
You are welcome! Thank you for watching!
Please can u link the tools u use like your microscope thanks a lot for your videos and sharing your knowledge
Have a PSU with a similar issue were it power cycles under load after the transformer was put back on. Not sure if powering on without a transformer broke it but with these repair vidoes worth trying to fix again.
I'm glad you liked the video. Please be careful!
Thanx master ❤️🇹🇷
You are very welcome!
Very educational video, I’m following your YT channel to learn more and more about repairing
A dump question, the blue multimeter was on AC or DC volts?
Thank you! It was on DC volts
Another enjoyable video,I noticed that you have changed the dap053 with Tea2016aat .
Thanks! Yes, it is a proper replacement.
Good fix again, have you always fixed consoles because you seem to have an extensive electronics knowledge and equipment?
Thank you! No, I only started working on consoles about 4 years ago. Before that, I would just tinker with building different circuits for my work or myself. I wasn't really repair focused until I found a way to have fun and make a little money while doing it by repairing consoles.
Where can I download schematics for Sony ps3, ps4 ps5, all versions?
wo nice Dmm
Thank you!
spectacular i wanna buy those i.c's for some psu's i got here. more for ps4
Thank You!
Like it, thank you
Glad you like it! Thank You!
@@ToltecMerc Are you using a Nano or mini soldering pen?
@@mm0077 i actually just got a Nano iron from China and I’ve been playing around with it. I normally use a Hakko FM-203 with FM-2027 hand piece.
@@ToltecMerc Sorry to ask again. Did you get qianli or the s20? How are you finding it?
@@mm0077 it is the Mega-Idea 20W which is the Qianli Nano soldering station. I like it ok. I use the large knife tip mostly. Only really useful for small jobs. Not a lot of thermal ability.
Man I really love your content, interesting and educational all the time.
After that video, I have a request for you, maybe it's something you like to pick up. The DAP053 seems to be hard to come by at the moment.
In a tweet I picked up someone who claimed the DAP053 is just a relabeled TEA2016AAT.
I'm not in a position to judge about that, but maybe you could take a look at that claim from a professional point of view?
It is true. That is what i used in this repair.
@@ToltecMerc Oh wow, ok, didn't notice that while watching. Well, I have no other video-ideas for you than 🙂
hi Merc
can you give me a link on Liquid Flux you use for SMD soldering? pleasure
It is just cheap Kingbo RMA-218. I bought it from eBay: www.ebay.com/itm/143408532066
do you offer repair service? i have a ADP-400FR, no 12v.
You can email me at toltecmerc@gmail.com to discuss.
ps5 error ce-10255-1 u have any ideal how to fix?
If you mean ce-108255-1, I have not encountered it. From what I have read, it sounds like corruption occurring to the game but no one knows why.
where are you located?
In the USA.
Wow again you are really amazing 👏 master of the master professional electronics engineer 👃 👏 🙌 amazing 👏 how can do this you should be rocket science 😀 😄 😊 😉 Well done my friend and happy easter from me from London mmmmmmm😊
Thank you so much 😀 Happy Easter to you!