How I Open The Anker PowerCore+ 26800 PD
HTML-код
- Опубликовано: 29 июн 2024
- Recently it was pointed out by a viewer that I didn’t clearly show how I took apart the Anker PowerCore+ 26800 PD in the previous videos I’ve made on it. I thought this was crazy largely because, well, I’ve made a lot of videos on that battery. I like it a lot, so yeah. Anyway, here is a video detailing how I open this battery pack. Note: this can probably apply to the Anker PowerCore+ 26800 PD 45W, Anker PowerCore+ 3-port Quick Charge 3.0, as well as any other Anker model that uses this extruded aluminum shape.
Thanks to Andrew Garl and Isabelle for pointing this out! I hope you get your Anker Powercore+ fixed!
Want More Anker PowerCore+ 26800 PD Videos? Good, cuz I made a lot of them! Check Out:
1. Review: Anker PowerCore+ 26800 with USB-C PD (Part 1): • Review: Anker PowerCor...
2. Testing: Power Efficiency Profiling with a new Anker PowerCore+ 26800 (Part 2): • Testing: Power Efficie...
3. Testing: Power Efficiency Profiling Comparison with 18-month old Anker PowerCore+ 26800 (Part 3): • Testing: Power Efficie...
4. Total Teardown: Anker PowerCore+ 26800 PD (Part 4): • Total Teardown: Anker ...
5. Repair: Anker PowerCore+ PD 26800 - It Won't Charge (or Discharge via USB-C PD)!: • Repair: Anker PowerCor...
0:00 Introduction
1:24 Disassembly
7:08 Reassembly
9:41 Wrap Up
#repair #battery #engineering 
Наука
I have the same power bank and although it's in mint condition and has barely been used it refuses to do anything. No lights, no charging and no output. Anker don't want to help so it looks like I'm going to have to follow your helpful teardown tips. Hopefully I can open it up and revive it because it's only been through about two cycles since I bought it and I don't want to throw out such an expensive item.
Seems that Anker have some quality issues with their products because from what I've been reading many other people are having issues with their power banks suddenly failing for no apparent reason.
I couldn't repair it. I tested the batteries and they are fine so it's likely to be something on the circuit board that's stopped working. I won't be buying Anker products again, feeling ripped off. Maybe I'll get the new Nitecore 20000 power bank to replace it, I've had good experience with their products.
Mine wont charge, just flashes 1 dot. Tried resetting it, opened it up seems normal
Same
Do you know the exact model number for the pd c port so I can replace it ?
so if i open mine up and replace the 4 battery cores would that repair my anker?
What batteries are they using? is it from Panasonic ?
It says "lggbf1l1865" on the batteries, so LG Electronics.
What type of batteries Anker using for this product? From the pink packaging it looks like 8 Samsung 30Q batteries together. However their capacity is 3000 mAh, times 8 is 24k mAh
Check out the full teardown in: Total Teardown: Anker PowerCore+ 26800 PD (Part 4). See Description above. Since the pack is 26,800mAh, it is 8 x 3350 mAh.
What charger model is used to charge the batteries in this power bank from the mains voltage in the house? I mean the voltage and amperage...5 volts on 1 A or 5 volts on 2 A ? thanks for the explanations
I made a video specifically on this. Check the description (its #5 on the list of videos).
Hey my anker power core 10400 when its fully charge it will not charge my phone at least 20% and it will be empty then when i charge it it will be fully charged within 1 min.(it will fully charge in 1 min and it will be empty in 1 min to) any help pls ….!
Weird. I don't know. What a bummer. I have two of those batteries - perhaps I'll take one apart and make a video. Have you tried charging other things with it?
My Expensive Omni power bank won't work I tried everything on the manual
Hi, sadly my Usb C port broke off the pcb with some solderpads. On the other side of the pcb are what i think are Testpads for the Port, i would like to solder a new port on using the testoads as substitutes for the ripped off pads, but i cant find a schematic to know which pad goes where. If you could measure them it would be a giant help, but i understand that you are probably too busy.
I am looking into this along with others that want to replace the USB-C port itself. In your case, it might not work, as I don't know if the test pads are there for all the needed connections for USB-C PD. Thanks for watching!
@@TheCuriousEngineerChannel there are 13 or 12 test pads exactly the same amount of pads on the other side so it should work thanks for looking into it
Any update on replacing usb C port mine has become lose and only work when pushed to the side
Mines 2000watts still won’t charge smh
@@TheCuriousEngineerChannel any update on replacing the usb c pd port?
This should have been less than a minute long😮
No video on this channel will ever be less than a minute long.
I have bought 2 ANKER products in the pass, I wasn't impressed...this 26800 PD charger was a complete let down. At the time it got lots of advertising hype and I bought into it and got stung. Just operating this power bank is confusing, ok I'll admit I'm not great with electronic gadgets I kinda want things to just plug in and work, but this power bank was very confusing to operate plus when it did work it just about charged my phone twice. Wouldnt buy ANKER again. Bought a ANKER multicharger and it burned out after a little while leaving a smell of burning plastic everywhere plus smoke