Check Out the ULTIMATE CARPENTRY CHECKLIST!! *Get your free interactive ebook here* : www.thehonestcarpenter.com/the-ultimate-carpentry-checklist This *150-item Visual Glossary* covers every important topic in carpentry. Check off the tools you have, the concepts you understand. And if you don't know a topic, just click on it for an explanation. Every carpenter and DIYer needs this free guide!
As a kid, we had an angle grinder with a sanding disc on it. I put it on my lap and plugged it in. Well, someone had turned it on and, of course, it tore up my legs. So, another tip is to make sure the tool is turned off before plugging it in. Thanks for sharing this video. Great job!
@@sovietonion72 kids lack the experience in these things. It is stupid to give such tools for kids to use, not for kids to mistakenly plug it in while holding it.
I've been using angle grinders daily for over 30 years and i must confess that i did get lazy regarding safety when using them. Until i had an avoidable accident resulting in a very nasty injury. Now, every single time i pick up a grinder, every time i have respect for the tool. On a side note i recently got rid of my old grinders and got a new modern model with brakes. Game changing in my opinion.
I'm so happy to see you warning people of the dangers of power tools. It's better to warn than speak too late.. I bought one of these blades because the regular saw blade with multiple teeth scared the crap out of me with kicking. The 3 blades and depth stop seems like a great design. I didn't have rings to fit the larger arbor so will try it when I have them. When something kicks I'm like "Not worth it," whereas before I'd just go for it. Loosing the tip of your finger after drinking and playing with power tools (finger caught in the chain of a DIY electric chopper) gave me a heightened sense of caution and an appreciation to continue playing the piano. I can't imagine the loss of fingers or even a hand. We wouldn't need OSHA if more people cared to warn like you do. So thanks THC!
There's no such thing as "the importance of safety", when whom wields the power has not earned the discipline required to perform the work. - Zack Massey Also, he was not responsible. Both elbows were bent while cutting. Stabilizing handle was not used. And you should NEVER use this to notch ANYTHING. But, he referred to Safety first, which is why you you found this helpful. Safety is an imaginary blanket that consumes people with no prior experience in the trade, or task at hand. Earn the right to use this tool, and you'll find that the tool is not dangerous at all. You are the danger.
one of the best opening 10 seconds to an informational youtube video I've seen - clear, concise, the topic, the punchline all up front, details follow - well done, kudos!
As someone who has always worked with wood I'd not used or owned one of these. Past few years I been using one to cut old crap car parts and alike in a garage. They are by far the only cutting tool I'm always nervous to handel they feel inherently unsafe to me, but I need to tile a kitchen and bathroom so my circ saw is most likely unaffective haha
I tried one of these. As in the film the seem to be fastened with the labelling down. Nasty backcuts all the time. I work mostly with stone though. So I quickly went back to a universal diamond cutting blade and went back to sculpting. The one good thing with the woodcutting blade is that the particles are rather big and doesn't affect your breathing as much, in the long run.
I will not be cutting wood again any time soon with my angle grinder, except maybe under very controlled conditions as you show. I had a tree root coming from under a concrete foundation which I could not get anything like a chain saw onto. Then I saw a wood cutting blade in the hardware shop, basically a coarse saw blade and thought aha - just the thing. Access was difficult, I could only use one hand. First contact, that grinder flew out of my hand and straight into my leg. I was wearing heavy gumboots but still that thing cut through them and into my leg. Luckily the blade grabbed the boots and that changed its direction, but not before chewing a 5mm wide 50mm long gash right over my shin bone. So yes, I broke more than one safety rule, like not being able to hold it securely and using it for something I should not have. And PPE - without those boots it would have cut to the bone. Also one big problem with these angle grinders is that power is locked on. If anything like that happens it does not lose power when you let it go, even when it does go flying. It has given me a new respect for safety on this device which I already knew had to be used with care.
I’ve used these blades for years on aluminum although it had more teeth. Biggest thing I can tell you is find the handle to that grinder. Never use this type of blade without a handle
I’ve never liked using the handle, Brandon. Always felt like two hands were steering from different directions that way. Maybe dewalts handle setup isn’t that good 🤔
I agree that the dewalt handles are not that great. I always used an old school metabo grinder which has a better handle and a spring lock nut for the blade. Again I will say you are correct in saying these blades are dangerous.....some people actually used to call them “suicide” blades. Definitely not a blade for a novice to power tools. Always love you videos man. Keep it up.
@@TheHonestCarpenter you just need to learn how to handle a grinder, a lot of users don't like a handle, but I think they just don't take the time to learn to use. I am a metal fabricator and use a grinder a lot for many things, I have been using many brands over the last 45 years, they are pretty much the same as far as handles go. The only time I have been bitten is when working for someone else and using their grinder with no handle. My feeling is your hand is just too close to what ever blade you have on, no matter if it is a toothed, cutoff, type 27 grinding, buffing, sanding or wire brush.....stay safe, thanks for making this video, watch out for those chainsaw type carving blades, they are really bad about kickback. Cheers from Florida, Paul
35 stitches up the front of my leg from this idea. It opened me up like a salad sandwich. Don’t do it. Wood blades should not be used on this tool. Also, the corded model that your using has no safety switch, so the tool will dance all round your workshop, whilst you are bleeding right next to it. Don’t do it!
thank you, thank you, thank you. be careful is something i hear so often (using my tools to do things they werent made for) but the fact you said it seventeen times makes me sit up and take notice.
Good safety tips! I'm about to use an angle grinder for the first time in order to cut some holes in a 22 gauge piece of sheet metal. The cuts don't have to be super precise but it would be nice if the edges were blunted somehow. Thanks for showing me how to stay safe!
thank you very much, i found your advice is fantastic . please continue to create those video that help novice like me. Will continue to watch your video
I've used a corded grinder (I borough from a friend) once in my life and I was terrified because the thing looks so dangerous. This week I bought myself a cordless milwaukee and I feel so much safe. It has a pressure paddle, so if you let the tool go it will stop, also has an electronic brake, so it stops spinning very quickly and it's only 8500rpm. Of course it is still dangerous, but I feel so much safe. Highly recommend a cordless grinder for someone looking to buy his first grinder. :)
You shouldn't be working with powerful tool if you're so frisky around even an 8.5k rpm grinder,maybe you should consider trades like cattle herding,it's more peaceful. In the past 40 years of using Grinders,I havent had one injury.
Had my first experience using a grinder to cut wood. First and last. Scary, scary stuff. Twice (was stupid to keep going after the first) the blade caught and the grinder jumped - fortunately to the side and away from my body. Happy/lucky to have tens fingers and two eyes still. Never again.
@@craigmcqueen7992 There was a great Stumpy Nubs video on the chainsaw attachment. He was cutting on the pull, didn't lift the tool a fraction of a second before moving it back for the next pass, a tiny error on his part, so the blade DUG IN, the tool spun and ripped up his hand. ruclips.net/video/x1hf2UILN80/видео.html The chainsaw disk doesn't seem all that different to me than the three carbide teeth here. He goes into some detail, I think the biggest issue is how unforgiving the tool is.
2 things for your consideration, 1 Stumpy Nubs did a video about 3 weeks ago where he was using an angle grinder to carve wood, instead of this blade he had the blade with chainsaw teeth. It grabbed and he will be healing for some time. Second and more important, angle grinders come with support handle, use unless it prevents you from getting the job done.
I had no idea that had happened, Bryan. A couple people have mentioned it. It's terrible to hear, and it shows just how dangerous grinders with aggressive blades can be. I like the handle for buffing and grinding applications, but for anything like cutting, I don't want to use it. One hand can overtake the other in terms of force, and you can push your blade off-center too easily. That's how guaranteed bind happens, and on a toothed blade this strong, it'll kick in an instant. I want both hands BEHIND the guard, and pulling/pushing in the exact same direction. Far less chance of twisting the blade this way, and both hands will remain behind the swing arc of a blade spinning out. I suppose it's personal preference though. No matter what, you need to be careful with these things, which I hope I drove home enough during the video.
I have spent the last two days watching all your videos. I am so impressed how well you explain things you are so diy guys can understand them. Keep the videos coming. I will probably finish catching up tomorrow.
@@siyabongasibusiso3467 I'm a Millwright... Your statement is only assuming certain scenarios. In the field it's impossible in a lot of situations to do what you suggested.
Thanks for the advice. I was pondering that blade for cutting ventilation in an unvented and angled roof soffit. I can't even get a decent shot at it with an angle drill and hole saw, so I've been considering cutting a slit instead, but so far can't find anything to fit. The soffit material is the same as the wood siding, nearly an inch thick and I'm well experienced, but frankly it looks a bit too hairy to attempt on a ladder above my head ... or should I say I wouldn't be too hairy afterward :) ... Anyway, good demo and I'm going to keep pondering!
Also worth checking a video on an accident while carving wood with an angle grinder to see what can go wrong. It's a different blade but since this blade here is also used for carving wood I thought it is relevant. How you attack the wood when carving matters greatly to your safety.
man grinders sometimes catch when im cutting concrete with smooth blades. This has an even higher likelihood of catching and you're not using a handle?
I can see keeping a saw blade handy for the occasional tough spot that you would otherwise have to use a recip to get to. I’m building a shed soon and can imagine Having an awkward angle or reach. I’ve seen lots of types of saw blades out there with various numbers of teeth available.
I have been using angle grinders for > 20 years -- mostly to cut metal. I've also done some construction work that required cutting concrete, tile, bricks, mortar, etc with diamond wheels on a grinder. A couple years ago, I was cutting some steel with a grinder. I was wearing safety glasses, and sparks were flying. A tiny piece of steel managed to get under my safety glasses and embedded into my eye. It was tiny -- like a grain of sand -- but it had a sharp barb. An opthamologist at the hospital had to use something similar to a grinding burr on a tool similar to a dremel to grind down the surface of my eye to get out the fleck of metal. It took a couple weeks for the surface of my eye to heal. I got lucky, and I don't have any permanent vision loss, but it could have been worse. I will never again use regular safety glasses when working with a grinder. You should either use a full face shield or at least goggles that snuggly fit against your face with no gaps. I'm not talking about cheap safety goggles but a good pair with a snug fit. I got a pair on amazon from a company called "Solidwork". They're like $20, they're comfortable, and I believe they completely seal all gaps around my eyes. I would at least use something like this if I decided to carve some wood with a grinder. If I were cutting big pieces of steel with a grinder, I'd use a face shield. Personally, I only use grinders with deadman switches that will shut off the grinder if you let go of the tool. I like double-action deadman switches that require you to first engage some sort of unlocking lever and then only keep the tool on as you're squeezing the switch. This way, if you get kickback, lose control of the tool, and let go of the switch, it should stop spinning.
@@stanimir4197 based on my experience, i can't cut lots of wood with angle grinder with or without the speed controller as it's not very comfortable to cut wood with it, i would prefer a jig saw or a real circular saw which are more convivence and produce a lot better result . :)
I have recently seen for sale a chainsaw disc for angle grinder. It looks lethal but from the advertising video it looks to be mightily powerful at destroying "EVERYTHING" it comes into contact with.
what would be a safe alternative? i used a small manual saw before but it ended up snapping because the wood was too fibrous for it... also it required a lot of strength for me for very little even not very noticeable results with my wood cutting projects ... i ended up hurting my hands and arms from the effort putting in.. is there even a safe yet effective option for me? i don't want to have to use an angle grinder, i'm so clumsy!!
Thank you for your demonstration, If I was cutting the wood , I was using the handle , that is more gripping power and more control on holding the machine , so as long as handle is there , there should be used as a safety reason.
VARIABLE SPEED CONTROL is what you need. There are angle grinders with a low rpm settings and low power. Just takes a bit more time but much safer and easier to keep it under control. Might be good to cut hard to reach things like small tree roots. And make sure to cut in such a way that the grinder will move away from you when there is kickback or it blocks etc. A good angle grinder also comes with a extra handle.
I've had my thumb nearly split down the middle due to my carelessness and an old metal disc. This was with the guard and handle on. Angle grinders + toothed saw blades = certain death or even injury!! Metal cutting discs are bad enough at those speeds. If you're itching to use a 4" wood blade for some weird reason, get a 4" tile cutting machine. You can still do some surface carving with that machine, and its way safer to use. I use a 4" tile/marble cutting machine with a flat ground wood blade for scoring plywood and other material prone to tearout, before making a full depth pass with a regular circular saw. It's actually easier than reducing/increasing depth on the one circular saw to make 2 passes. If all I had on hand was an angle grinder with a wood blade for this job, I'd probably go back and get the right tool. If that isn't an option, I'd certainly return the money and go home hungry. Some risks in life are worth taking, but needless risks like these, are not worth anything. 👍
Very helpful. One thing I didn't find clear: were you using the woodcutting disk when you were shaping the wood, or did you switch to something else? Thanks for the informative video.
Handy tips for those who'd like to contribute a few fingers or thumbs to the finger-donor-bank. They are particularly short of right-handed thumbs I hear. There is less call for legs because people using this blade are usually only donating half a leg.
Two thumbs for stressing safety! However, grinders don't cut while pulling unless you're handling them backwards. Grinders, like most tools cut throwing all the waste away from you. I use it plenty for welding applications and for cutting tiles. If you need something that looks like a grinder to cut wood, I suggest getting the Dremmel Saw Max. For near a $100 you get the saw, four disks for different applications (wood cutting, metal cutting, flush wood cutting and tile glue removal) a support handle and a carrying/storage bag. I have to grinders which I use one for cutting metal and tiles, the other one for actual grinding metal. If I'm cutting just a piece of wood and I don't want to pull out neither the table saw nor the miter saw, I get the Dremmel Saw Max or the Multi-tool (you call it the multi-purpose). Avoid an accident; don't use the grinder to cut wood.
I would suggest using a grinder with a paddle switch so you can cut the tool off without removing a hand from the tool. Grinders are awesome for coping crown mouldings.
Most important thing when using grinders is to understand what makes them kick back and to make sure it will only kick back away from you. Kickback happens, but if you're ready for it, then it's not really that dangerous.
They say that there are only two types of people who have used AGs for wood-cutting: (not yet) injured or dead. The grinder itself is kind of a dangerous tool + the structure of the wood + the blade + the speed and you get a recipe for a disaster. There are jigsaws and circular saws intended for cutting wood so you should buy a right tool and not have your delicate flesh torn apart - it’s the only right thing to do.
So Was Watching & Reading Comments These Past 3 Days to get information what should i buy, a angle grinder or a circular saw for cutting some wood (to build a small house for my dog. Finally i bought a angle grinder with a TCT Saw blade & a glove. It was a 900W With 11000RPM Grinder. The TCT Saw blade Have a 13000RPM. Yeah i know its dangerous because of kickback but not in my case, while cutting, no kickbacks at all and always wear PPE When Carry This Kind of works. Always hold the handle tightly because you never know when it could kickback also it was my first time using angle grinder.The Wood was smooth & it was easy to cut but never cut hard wood because it can cause kickback. Don't have much experience of giving information but that's my experience of using a angle grinder to cut wood & the wood was 'PALLET'. Any ques feel free. My Personal PPE • Glove • Safety Shoes • Safety Goggles
Good tip, dirch this kind of grinder !! Use a paddle trigger which doesnt lock on. That way if you get a bad kick back and lose control you can just drop the thing itl stop itself.
I think I'll stick with my circular saw or jig saw for lighter work. I watched your video about circ saw kickback and I feel safer knowing it has a sliding guard and soleplate. The angle grinder only has my wrist for stability with the potential for blade binding and an always partially exposed blade. A kickback from it could be disastrous. I love it, but I'll keep it for grinding.
I was skepticle of a 20 volt circular saw. But I have several B&D 20 volt batteries and the drill Works great ruclips.net/user/postUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c . I saw the 4 stars and some glowing reviews so decided to purchase this saw. Well, leave your money in your pocket and run a cord because this little saw won't cut
Thank you for solving the mystery - I've often wondered why grinders don't come with wooden blades, but been too lazy to research the answer. Very informative and concise vid. 👍
Someone stole my bicycle using one of these, and I want to setup chains & u-locks, so that they make the disc severely injure or kill the user, or at the very least, quickly ruin the disc before they cut all the way through. I didn't find what I was looking for here, but I learned a lot. Thank you.
Hello, I am posting from by boyfriend's account, we have recently moved to Shetland to an old church cause I couldn't afford a house anywhere else. Anyway, what tool would you recommend for cutting the pews out of the flooring? They seem to be attached to the wooden flooring via big pegs sticking out and into the floor at the bottom. They're only flimsy looking pews, not like big solid ones. I don't know anything about anything to do with building, sorry for the silly question! Other than having worked in site offices in London. I'm looking at saws on wilko and can't tell what I should get, angle grinder or a saw of some type? I would very grateful for any suggestion you might have! Many thanks, Eda
Yes, and angle grinder CAN cut wood. Likewise, a lawn mower CAN cut wood. File some notches in the blade, and a meat slicer becomes a saw. On another front, I love my blood. However, I prefer keeping it on the INSIDE, so I just stick to using tools for the job the were designed for and can perform with a reasonable degree of safety. I find this the best use for these things as it helps keep my blood in my veins and arteries, rather than splashed about.
I had a serious safety problem with one of these blades so ditched it quite promptly . . . . . My angle grinder slams on a braking effect when the trigger is released, but the heavy blade wanted to keep on spinning, so it undid its nut and flew off the spindle!
It looks like it would be a good stump grinder for small stumps that only need a little material removed. Say, to lower a stump in order to mow over it.
I put a 7 inch circular saw blade I found on the road on my angle grinder, looking back on it that was such a bad idea because the blade was right next to my finger. It cut wood pretty well though.
I just finished doing that with a slightly smaller circ saw blade. No guard. I had the speed way up there not thinking anything about slowing it down. The grinder cuts very fast.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Check Out the ULTIMATE CARPENTRY CHECKLIST!! *Get your free interactive ebook here* :
www.thehonestcarpenter.com/the-ultimate-carpentry-checklist
This *150-item Visual Glossary* covers every important topic in carpentry. Check off the tools you have, the concepts you understand. And if you don't know a topic, just click on it for an explanation. Every carpenter and DIYer needs this free guide!
As a kid, we had an angle grinder with a sanding disc on it. I put it on my lap and plugged it in. Well, someone had turned it on and, of course, it tore up my legs. So, another tip is to make sure the tool is turned off before plugging it in. Thanks for sharing this video. Great job!
Good thing it only cut your legs, ...... as opposed to other boy things!!!
Another tip is to not put it on your legs
That is awful thing to happen to anyone, let alone a kid. Some of these powertools are truly dangerous.
@SocratesWasRight Putting in on your lap and plugging it in is plain stupid plus these are power tools not toys.
@@sovietonion72 kids lack the experience in these things. It is stupid to give such tools for kids to use, not for kids to mistakenly plug it in while holding it.
I've been using angle grinders daily for over 30 years and i must confess that i did get lazy regarding safety when using them. Until i had an avoidable accident resulting in a very nasty injury. Now, every single time i pick up a grinder, every time i have respect for the tool. On a side note i recently got rid of my old grinders and got a new modern model with brakes. Game changing in my opinion.
Just got my first angle grinder for a project I'm working on. Your safety tips were appreciated.
I'm so happy to see you warning people of the dangers of power tools. It's better to warn than speak too late.. I bought one of these blades because the regular saw blade with multiple teeth scared the crap out of me with kicking. The 3 blades and depth stop seems like a great design. I didn't have rings to fit the larger arbor so will try it when I have them. When something kicks I'm like "Not worth it," whereas before I'd just go for it. Loosing the tip of your finger after drinking and playing with power tools (finger caught in the chain of a DIY electric chopper) gave me a heightened sense of caution and an appreciation to continue playing the piano. I can't imagine the loss of fingers or even a hand. We wouldn't need OSHA if more people cared to warn like you do. So thanks THC!
Thank you for being responsible! You always stress the importance of safety. Not enough tubers do that! Keep up the good work. Really helpful stuff.
There's no such thing as "the importance of safety", when whom wields the power has not earned the discipline required to perform the work. - Zack Massey
Also, he was not responsible. Both elbows were bent while cutting. Stabilizing handle was not used. And you should NEVER use this to notch ANYTHING. But, he referred to Safety first, which is why you you found this helpful. Safety is an imaginary blanket that consumes people with no prior experience in the trade, or task at hand. Earn the right to use this tool, and you'll find that the tool is not dangerous at all. You are the danger.
one of the best opening 10 seconds to an informational youtube video I've seen - clear, concise, the topic, the punchline all up front, details follow - well done, kudos!
Thank you! 😄
As someone who has always worked with wood I'd not used or owned one of these. Past few years I been using one to cut old crap car parts and alike in a garage.
They are by far the only cutting tool I'm always nervous to handel they feel inherently unsafe to me, but I need to tile a kitchen and bathroom so my circ saw is most likely unaffective haha
Thank you for your video
People spend so much money on redesigning, repurposing angle grinders.
Thank you for stressing how dangerous these are
I tried one of these. As in the film the seem to be fastened with the labelling down. Nasty backcuts all the time. I work mostly with stone though. So I quickly went back to a universal diamond cutting blade and went back to sculpting. The one good thing with the woodcutting blade is that the particles are rather big and doesn't affect your breathing as much, in the long run.
I will not be cutting wood again any time soon with my angle grinder, except maybe under very controlled conditions as you show. I had a tree root coming from under a concrete foundation which I could not get anything like a chain saw onto. Then I saw a wood cutting blade in the hardware shop, basically a coarse saw blade and thought aha - just the thing. Access was difficult, I could only use one hand. First contact, that grinder flew out of my hand and straight into my leg. I was wearing heavy gumboots but still that thing cut through them and into my leg. Luckily the blade grabbed the boots and that changed its direction, but not before chewing a 5mm wide 50mm long gash right over my shin bone. So yes, I broke more than one safety rule, like not being able to hold it securely and using it for something I should not have. And PPE - without those boots it would have cut to the bone. Also one big problem with these angle grinders is that power is locked on. If anything like that happens it does not lose power when you let it go, even when it does go flying. It has given me a new respect for safety on this device which I already knew had to be used with care.
I’ve used these blades for years on aluminum although it had more teeth. Biggest thing I can tell you is find the handle to that grinder. Never use this type of blade without a handle
I’ve never liked using the handle, Brandon. Always felt like two hands were steering from different directions that way. Maybe dewalts handle setup isn’t that good 🤔
I agree that the dewalt handles are not that great. I always used an old school metabo grinder which has a better handle and a spring lock nut for the blade. Again I will say you are correct in saying these blades are dangerous.....some people actually used to call them “suicide” blades. Definitely not a blade for a novice to power tools. Always love you videos man. Keep it up.
@@TheHonestCarpenter you just need to learn how to handle a grinder, a lot of users don't like a handle, but I think they just don't take the time to learn to use. I am a metal fabricator and use a grinder a lot for many things, I have been using many brands over the last 45 years, they are pretty much the same as far as handles go. The only time I have been bitten is when working for someone else and using their grinder with no handle. My feeling is your hand is just too close to what ever blade you have on, no matter if it is a toothed, cutoff, type 27 grinding, buffing, sanding or wire brush.....stay safe, thanks for making this video, watch out for those chainsaw type carving blades, they are really bad about kickback. Cheers from Florida, Paul
That's what helped me today was the handle. I might not have attempted to cut without it.
Handle/no handle, they're going to be dangerous. I'm much more comfortable with a chainsaw.
Thanks for sharing this video. I'm confident it has saved me significant injury. No angle grinder wood-cutting for me!
35 stitches up the front of my leg from this idea. It opened me up like a salad sandwich. Don’t do it. Wood blades should not be used on this tool. Also, the corded model that your using has no safety switch, so the tool will dance all round your workshop, whilst you are bleeding right next to it. Don’t do it!
i also had 35 stitches , very very dangerous tool
Hope you recovered guys, thanks for sharing.
If you just need to cut wood with that ugly finish, just grab the cheapest circular saw........it will do the job way much better.
Thanks for making my day 🤣😂🤣😂
Thank you for posting this! I had the blade in my Amazon cart to buy, but now I know it's not worth the risk. I hope you are ok now.
- REALLY good info for a beginner. Thanx a million 4 sharing,
thank you, thank you, thank you. be careful is something i hear so often (using my tools to do things they werent made for) but the fact you said it seventeen times makes me sit up and take notice.
Hi thank u for sharing this knowledge of grinder cutting wood I was always hesitant from a long time to work with grinder to cut wood😊
Good safety tips! I'm about to use an angle grinder for the first time in order to cut some holes in a 22 gauge piece of sheet metal. The cuts don't have to be super precise but it would be nice if the edges were blunted somehow. Thanks for showing me how to stay safe!
Very helpful. Thanks! After watching this, I've decided to buy the proper saw. The grinder is too unstable and it won't cut deep enough. Thanks again!
Good thinking, Sean! I’m glad the video was helpful 🙂
Wow your method is amazing im going to try it on because my circular saw Give Up!! i have a Hart 20v Angle grinder!! Does it fit all model grinders???
thank you very much, i found your advice is fantastic . please continue to create those video that help novice like me. Will continue to watch your video
I've used a corded grinder (I borough from a friend) once in my life and I was terrified because the thing looks so dangerous. This week I bought myself a cordless milwaukee and I feel so much safe. It has a pressure paddle, so if you let the tool go it will stop, also has an electronic brake, so it stops spinning very quickly and it's only 8500rpm. Of course it is still dangerous, but I feel so much safe. Highly recommend a cordless grinder for someone looking to buy his first grinder. :)
You shouldn't be working with powerful tool if you're so frisky around even an 8.5k rpm grinder,maybe you should consider trades like cattle herding,it's more peaceful. In the past 40 years of using Grinders,I havent had one injury.
I’m about to buy my first angle grinder… a cordless. Scary though.
@lazarusramaube8291 ... Same here, but it won't ever get comfortably numb. I have 7 hanging in my shop with another 7in. And 12in. on a table.
Had my first experience using a grinder to cut wood. First and last. Scary, scary stuff. Twice (was stupid to keep going after the first) the blade caught and the grinder jumped - fortunately to the side and away from my body. Happy/lucky to have tens fingers and two eyes still. Never again.
Were you cutting on the pull, as the guy says in this video? That sounds okay if the grinder jumps away from your body.
@@craigmcqueen7992 i was. Blade never came anywhere near me to be honest. But spinning, jumping blades always leave me packing my shorts.
@@scottwalton3708 yeah I reckon I would too.
@@craigmcqueen7992 There was a great Stumpy Nubs video on the chainsaw attachment. He was cutting on the pull, didn't lift the tool a fraction of a second before moving it back for the next pass, a tiny error on his part, so the blade DUG IN, the tool spun and ripped up his hand. ruclips.net/video/x1hf2UILN80/видео.html The chainsaw disk doesn't seem all that different to me than the three carbide teeth here. He goes into some detail, I think the biggest issue is how unforgiving the tool is.
Same here
2 things for your consideration, 1 Stumpy Nubs did a video about 3 weeks ago where he was using an angle grinder to carve wood, instead of this blade he had the blade with chainsaw teeth. It grabbed and he will be healing for some time. Second and more important, angle grinders come with support handle, use unless it prevents you from getting the job done.
I had no idea that had happened, Bryan. A couple people have mentioned it. It's terrible to hear, and it shows just how dangerous grinders with aggressive blades can be. I like the handle for buffing and grinding applications, but for anything like cutting, I don't want to use it. One hand can overtake the other in terms of force, and you can push your blade off-center too easily. That's how guaranteed bind happens, and on a toothed blade this strong, it'll kick in an instant. I want both hands BEHIND the guard, and pulling/pushing in the exact same direction. Far less chance of twisting the blade this way, and both hands will remain behind the swing arc of a blade spinning out. I suppose it's personal preference though. No matter what, you need to be careful with these things, which I hope I drove home enough during the video.
I got a lot of long branches and wanted to use a angle grinder but I think I will go on a course first before buying and using one ..
I have spent the last two days watching all your videos. I am so impressed how well you explain things you are so diy guys can understand them. Keep the videos coming. I will probably finish catching up tomorrow.
Great advice I agree totally, I would definitely only use the grinder for shaping / carving.
Thanks Karl! :)
Use a router. That’s why they make them.
@@dclinks who are you talking to Donald because I unsure what you mean?
Next video series: How to reattach fingers and stitch up nasty jagged cuts.
It is very dangerous make a table saw with your spare grinder
A grinder nearly broke my leg....and my bone 🍖🦴
@@siyabongasibusiso3467 I'm a Millwright... Your statement is only assuming certain scenarios. In the field it's impossible in a lot of situations to do what you suggested.
You can do this with variable angle grinder or speed controller, also you can buy angle grinder bracket so it would look like circular saw.
yeah I'm thinking of getting an angle grinder with a stand since I have limited space and this combo seems like a pretty good idea
After reading these comments I’m not even going to try it lmao great example of learning from others mistakes.
Thanks for the advice. I was pondering that blade for cutting ventilation in an unvented and angled roof soffit. I can't even get a decent shot at it with an angle drill and hole saw, so I've been considering cutting a slit instead, but so far can't find anything to fit. The soffit material is the same as the wood siding, nearly an inch thick and I'm well experienced, but frankly it looks a bit too hairy to attempt on a ladder above my head ... or should I say I wouldn't be too hairy afterward :) ... Anyway, good demo and I'm going to keep pondering!
Use a multi tool
Also worth checking a video on an accident while carving wood with an angle grinder to see what can go wrong. It's a different blade but since this blade here is also used for carving wood I thought it is relevant. How you attack the wood when carving matters greatly to your safety.
Thank you, very much Sir. ❤️👍
very helpful thanks, after washing this, I lost two fingers, before it was five fingers, so great progress.
How many fingers are you holding up now 🖕🏼 haha
man grinders sometimes catch when im cutting concrete with smooth blades. This has an even higher likelihood of catching and you're not using a handle?
You're a brave man using that saw bit without a handle.
I can see keeping a saw blade handy for the occasional tough spot that you would otherwise have to use a recip to get to. I’m building a shed soon and can imagine Having an awkward angle or reach. I’ve seen lots of types of saw blades out there with various numbers of teeth available.
I have been using angle grinders for > 20 years -- mostly to cut metal. I've also done some construction work that required cutting concrete, tile, bricks, mortar, etc with diamond wheels on a grinder.
A couple years ago, I was cutting some steel with a grinder. I was wearing safety glasses, and sparks were flying. A tiny piece of steel managed to get under my safety glasses and embedded into my eye. It was tiny -- like a grain of sand -- but it had a sharp barb. An opthamologist at the hospital had to use something similar to a grinding burr on a tool similar to a dremel to grind down the surface of my eye to get out the fleck of metal. It took a couple weeks for the surface of my eye to heal. I got lucky, and I don't have any permanent vision loss, but it could have been worse.
I will never again use regular safety glasses when working with a grinder. You should either use a full face shield or at least goggles that snuggly fit against your face with no gaps. I'm not talking about cheap safety goggles but a good pair with a snug fit. I got a pair on amazon from a company called "Solidwork". They're like $20, they're comfortable, and I believe they completely seal all gaps around my eyes. I would at least use something like this if I decided to carve some wood with a grinder. If I were cutting big pieces of steel with a grinder, I'd use a face shield.
Personally, I only use grinders with deadman switches that will shut off the grinder if you let go of the tool. I like double-action deadman switches that require you to first engage some sort of unlocking lever and then only keep the tool on as you're squeezing the switch. This way, if you get kickback, lose control of the tool, and let go of the switch, it should stop spinning.
I have this 5 teeth version.
Same high kick back.
But I have speed variable 125mm Angle Grinder.
Hi, thanks. What if you want to cut a tree stump growing around upredictably positioned masonry? Is there a blade that would go through both?
When cutting woods with angle grinder, I use speed controller. It’s safer and more convenient that way.
There is variable speed grinder, i'm using it, it is more safe
Standard AC grinders don't like that (the speed control) as they need the air flow to cool.
@@stanimir4197 based on my experience, i can't cut lots of wood with angle grinder with or without the speed controller as it's not very comfortable to cut wood with it, i would prefer a jig saw or a real circular saw which are more convivence and produce a lot better result . :)
@@backyard.craftsman me too.
I have recently seen for sale a chainsaw disc for angle grinder. It looks lethal but from the advertising video it looks to be mightily powerful at destroying "EVERYTHING" it comes into contact with.
Thanks for excellent safety reminders. 👍👍
Very nice video! Thanks for trying it out! Have a great day and stay safe!
I got one of these. Had a kickback and nearly ripped half my face off, I got lucky but it won't get used again!
No wood blades in my side grinder!!! Thank you for sharing!!👍👍
what would be a safe alternative? i used a small manual saw before but it ended up snapping because the wood was too fibrous for it... also it required a lot of strength for me for very little even not very noticeable results with my wood cutting projects ... i ended up hurting my hands and arms from the effort putting in.. is there even a safe yet effective option for me? i don't want to have to use an angle grinder, i'm so clumsy!!
Lots to learn from the experience shared. Thank you
Thank you for your demonstration, If I was cutting the wood , I was using the handle , that is more gripping power and more control on holding the machine , so as long as handle is there , there should be used as a safety reason.
VARIABLE SPEED CONTROL is what you need. There are angle grinders with a low rpm settings and low power. Just takes a bit
more time but much safer and easier to keep it under control. Might be good to cut hard to reach things like small tree roots. And make sure to cut in such a way that the grinder will move away from you when there is kickback or it blocks etc. A good angle grinder also comes with a extra handle.
Thanks for the advice and info. I am a newbie and will definitely follow your advice
I've had my thumb nearly split down the middle due to my carelessness and an old metal disc. This was with the guard and handle on. Angle grinders + toothed saw blades = certain death or even injury!!
Metal cutting discs are bad enough at those speeds. If you're itching to use a 4" wood blade for some weird reason, get a 4" tile cutting machine. You can still do some surface carving with that machine, and its way safer to use.
I use a 4" tile/marble cutting machine with a flat ground wood blade for scoring plywood and other material prone to tearout, before making a full depth pass with a regular circular saw. It's actually easier than reducing/increasing depth on the one circular saw to make 2 passes.
If all I had on hand was an angle grinder with a wood blade for this job, I'd probably go back and get the right tool. If that isn't an option, I'd certainly return the money and go home hungry. Some risks in life are worth taking, but needless risks like these, are not worth anything. 👍
yep i cut my middle finger almost to the bone before i could say ouch. These this are a last resort tool for me
Hey buddy, thank you so much for the nice video! Loved it! :)
Is there any chop saw bladr to cut wood?
Yes. I use this with a work zone anglegrinder chop stand. It is limited however to the size of wood because of the smaller blade.
Very helpful. One thing I didn't find clear: were you using the woodcutting disk when you were shaping the wood, or did you switch to something else?
Thanks for the informative video.
Super instructions..with lot of caution .Great job..
Handy tips for those who'd like to contribute a few fingers or thumbs to the finger-donor-bank. They are particularly short of right-handed thumbs I hear. There is less call for legs because people using this blade are usually only donating half a leg.
Do you recommend Reciprocating saw for wood and metal? How many watts should it have at least?
Two thumbs for stressing safety! However, grinders don't cut while pulling unless you're handling them backwards. Grinders, like most tools cut throwing all the waste away from you. I use it plenty for welding applications and for cutting tiles. If you need something that looks like a grinder to cut wood, I suggest getting the Dremmel Saw Max. For near a $100 you get the saw, four disks for different applications (wood cutting, metal cutting, flush wood cutting and tile glue removal) a support handle and a carrying/storage bag. I have to grinders which I use one for cutting metal and tiles, the other one for actual grinding metal. If I'm cutting just a piece of wood and I don't want to pull out neither the table saw nor the miter saw, I get the Dremmel Saw Max or the Multi-tool (you call it the multi-purpose). Avoid an accident; don't use the grinder to cut wood.
Then you are using it the wrong way because grinders throw waste at you if used in the correct direction.
I think what you want is a COMPACT CIRCULAR SAW. They are smaller circular saws with an angle grinder form factor, but much safer for wood projects.
This is a video I really needed! Thank you!
Tank's....luar biasa ide anda...sangat berguna bagi orang2.
Brothers Wood...INDONESIA
I would suggest using a grinder with a paddle switch so you can cut the tool off without removing a hand from the tool. Grinders are awesome for coping crown mouldings.
I hate the ones that just have a switch -- too easy to make mistakes. Paddles all the way.
I think you explained everything very well. Safety first!!!!
More for shaping and rough cuts.
Thanks Michael! That's exactly what I'd use it for. Carefully! :)
This blade design answers my question about Dremel's 4" saw, which also spins fast and uses a wood blade with few teeth.
Skill is very important here.. 👍
This video is so valuable. Thank You!!!
You’re welcome, Anita!
Nice vlog! I have no match idea about these tools. Can an angle grinder blde be attached to saw tool or unit?
Most important thing when using grinders is to understand what makes them kick back and to make sure it will only kick back away from you. Kickback happens, but if you're ready for it, then it's not really that dangerous.
Hi your videos are really interesting. I am a beginner and would like to know what tools to buy as a beginner. Mostly for making tables, chair, etc
They say that there are only two types of people who have used AGs for wood-cutting: (not yet) injured or dead. The grinder itself is kind of a dangerous tool + the structure of the wood + the blade + the speed and you get a recipe for a disaster. There are jigsaws and circular saws intended for cutting wood so you should buy a right tool and not have your delicate flesh torn apart - it’s the only right thing to do.
Well done. You stopped this beginner from using the angle grinder for wood 😮😅
So Was Watching & Reading Comments These Past 3 Days to get information what should i buy, a angle grinder or a circular saw for cutting some wood (to build a small house for my dog. Finally i bought a angle grinder with a TCT Saw blade & a glove. It was a 900W With 11000RPM Grinder. The TCT Saw blade Have a 13000RPM. Yeah i know its dangerous because of kickback but not in my case, while cutting, no kickbacks at all and always wear PPE When Carry This Kind of works. Always hold the handle tightly because you never know when it could kickback also it was my first time using angle grinder.The Wood was smooth & it was easy to cut but never cut hard wood because it can cause kickback. Don't have much experience of giving information but that's my experience of using a angle grinder to cut wood & the wood was 'PALLET'. Any ques feel free.
My Personal PPE
• Glove
• Safety Shoes
• Safety Goggles
Respect the Tool!
I have a chop attachment for the grinder and this is safe for cutting wood with a suitable blade.
Thank you for your safety advice.
Very useful video with many good tips. Thanks.
Good tip, dirch this kind of grinder !! Use a paddle trigger which doesnt lock on. That way if you get a bad kick back and lose control you can just drop the thing itl stop itself.
I think I'll stick with my circular saw or jig saw for lighter work. I watched your video about circ saw kickback and I feel safer knowing it has a sliding guard and soleplate. The angle grinder only has my wrist for stability with the potential for blade binding and an always partially exposed blade. A kickback from it could be disastrous. I love it, but I'll keep it for grinding.
I’m scared of them so I stay away.
I was skepticle of a 20 volt circular saw. But I have several B&D 20 volt batteries and the drill Works great ruclips.net/user/postUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c . I saw the 4 stars and some glowing reviews so decided to purchase this saw. Well, leave your money in your pocket and run a cord because this little saw won't cut
Grinders are scary enough when cutting metal, you won’t ever catch my trying to cut wood with one lol! I’m clumsy at the best of times 🤣🤣🤣
Lets say im cutting a big sheet of MDF wood and it grabs, is it a bad time or can i hold it n jam it
Great video.👊🏾💯
Thank you for solving the mystery - I've often wondered why grinders don't come with wooden blades, but been too lazy to research the answer.
Very informative and concise vid. 👍
Was trying not to buy an oscillating tool but after this video and comment section, that $150 doesn't sound so bad after all.
Thanks I was given one and I in turn gave it to my neighbor who uses them safely with his job.
I have. Jigsaw and circular saw that I know how to use.
I,ve just bought 2 of these blades, they do not take prisoners
Can it be used on a ryboi
Can use marble cutter for cutting wood or ply...with sefty
My Ryobi has a trigger switch that releases if you lift your finger.
Can I use that with my 4" angle grinder?
Someone stole my bicycle using one of these, and I want to setup chains & u-locks, so that they make the disc severely injure or kill the user, or at the very least, quickly ruin the disc before they cut all the way through. I didn't find what I was looking for here, but I learned a lot. Thank you.
Sir, what about those 30-40 teeth 4" saw disc for wood? It's in the market.
Hello, I am posting from by boyfriend's account, we have recently moved to Shetland to an old church cause I couldn't afford a house anywhere else. Anyway, what tool would you recommend for cutting the pews out of the flooring? They seem to be attached to the wooden flooring via big pegs sticking out and into the floor at the bottom. They're only flimsy looking pews, not like big solid ones. I don't know anything about anything to do with building, sorry for the silly question! Other than having worked in site offices in London. I'm looking at saws on wilko and can't tell what I should get, angle grinder or a saw of some type? I would very grateful for any suggestion you might have! Many thanks, Eda
Yes, and angle grinder CAN cut wood. Likewise, a lawn mower CAN cut wood. File some notches in the blade, and a meat slicer becomes a saw.
On another front, I love my blood. However, I prefer keeping it on the INSIDE, so I just stick to using tools for the job the were designed for and can perform with a reasonable degree of safety. I find this the best use for these things as it helps keep my blood in my veins and arteries, rather than splashed about.
I had a serious safety problem with one of these blades so ditched it quite promptly . . . . . My angle grinder slams on a braking effect when the trigger is released, but the heavy blade wanted to keep on spinning, so it undid its nut and flew off the spindle!
It looks like it would be a good stump grinder for small stumps that only need a little material removed. Say, to lower a stump in order to mow over it.
Looks good at making stumps out of fingers.
Lets summarise: CRASY IDEA ! 😄
Useful tips.
I put a 7 inch circular saw blade I found on the road on my angle grinder, looking back on it that was such a bad idea because the blade was right next to my finger. It cut wood pretty well though.
I just finished doing that with a slightly smaller circ saw blade. No guard. I had the speed way up there not thinking anything about slowing it down. The grinder cuts very fast.
excellent, instructions and advise to practice safety. Thanks.