How to Replace Rear Brakes 2011-2021 Jeep Grand Cherokee

Поделиться
HTML-код
  • Опубликовано: 2 дек 2024

Комментарии • 22

  • @TRQ
    @TRQ  Год назад +4

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @ryanw4842
    @ryanw4842 8 месяцев назад +7

    Your video is extremely easy to follow. Your closeups are very appreciative. Thank you for making my life easier. 🎉

  • @NobodyHasThisOne
    @NobodyHasThisOne 9 месяцев назад +3

    Thank you for creating this video. I was able to replace my rear rotors and pads using your step by step video. I ran into an issue trying to remove the caliper pins, (I needed an impact wrench). Fortunately, I was still able to remove the old pads and install the new without too much trouble. Thank you!

  • @Sirsk8ordie
    @Sirsk8ordie 8 месяцев назад +3

    I always put the indicator on the inside pad. The inner pad is always slightly more worn than the outer one.

  • @DrowningInDejaVu
    @DrowningInDejaVu 4 месяца назад +7

    “ these will be behind your rear wheel“ 😂

  • @ejc491
    @ejc491 2 месяца назад +3

    I prefer to loosen the caliper pins BEFORE taking the taking off the caliper bracket.

  • @brianwaters8362
    @brianwaters8362 3 месяца назад +5

    What happened to the O ring?

  • @danielmacdonald2565
    @danielmacdonald2565 8 месяцев назад +1

    Any tips for when the drum parking brake shoes inside the rotor is stuck and won’t let go?

  • @submissions72
    @submissions72 Месяц назад +1

    Ohhhhh that bottom 18mm LMFAO good luck! I found it easier to remove the caliper 7mm first.

  • @Nordys_Webwoods
    @Nordys_Webwoods 15 дней назад

    Thanks buddy 👍

  • @ricvourn6404
    @ricvourn6404 3 месяца назад

    Hey thanks for sharing this awesome instructional video. It was an excellent demonstration and I learned a lot.

  • @claudiofornaroMusic
    @claudiofornaroMusic Месяц назад

    Important. Open the brake fluid reservoir before you start, or air will come in

  • @geneticexe
    @geneticexe 8 месяцев назад +2

    Bro doing the break change on a barn find

  • @HemiUpkeem
    @HemiUpkeem 3 месяца назад

    I’m no guinus but isn’t there a seal around the caliper n hub but good step by step vid

  • @BILLYBAGADONUTS
    @BILLYBAGADONUTS 8 месяцев назад

    2019 Jeep Grand Cherokee Limited X V8 engine do you need to plug in a scan tool and put the vehicle in service mode to collapse the calipers?

  • @CurrentGenGamesWithNick
    @CurrentGenGamesWithNick 5 месяцев назад

    Are you using a 3/8 torque wrench flathead to get to the bolts of the brake ?

  • @JOHNWSC
    @JOHNWSC 8 месяцев назад

    Great video...Thanks for the help

  • @thecosmicguru4986
    @thecosmicguru4986 2 месяца назад +3

    AVOID grease on your pads

  • @serenitynow66
    @serenitynow66 6 месяцев назад

    TRQ YOU ROCK !! Thank you.. XXXX

  • @mattp9029
    @mattp9029 8 месяцев назад

    Brilliant. thanks for this. Going to tackle this soon.

  • @phillipporche9238
    @phillipporche9238 6 месяцев назад +1

    It's a lie the back caliper bracket bolts are not 18mm they are torque sockets

  • @sevan507
    @sevan507 6 месяцев назад +1

    With this simple and yet great step-by-step tutorial video I will now be saving $$$ and changing brake pads on my own!
    Thank you so much!
    🫡👌