Good day to you. I am a senior rider on HONDA from Japan. Enjoying touring ,camping and video uploading. This is so nice 360 camera video Awesome!! Thank you so much for sharing! Full supported ! Have a nice day my friend!!
Noticed that your camera is diagonal. Is that ok or does it need to be completely horizontal? I have the same issue and thinking of returning it as I can’t fix it horizontal.
For our MTB selfie videos, we used velcro + carbon fiber gopro selfie stick, plus superglue to lock out the joints of the stick. Carbon fiber was key... because ya know... grams count. ;)
Hey thank you for the review. I am still wondering this mount would not fit to aero bars for the tri bike. I am riding p5x so do you have any recommendations for the mount? Kindly enlighten me pls. 😊😊😊
Hello Junseok, I woul try with the MOto Mount, but being very careful about clamping it on carbon components; i've clamped it to the seatpost with no issue. Otherwise you can just ride with the stick in your hand filming for 10-30 sec, it's what i do now. Here is the link to the accessories where you can find the Moto mount, i would buy insta360 direct as the oones you find online often do not hold up: the weight the mount needs to hold up is quite a lot store.insta360.com/accessory?insrc=INRZXYB
Hi, I used the sticky lens protector and the premiium lens guard on the x2, on the x3 i'm not using any, it's risky but the sticky lens guards really reduce the image quality. Be very careful and maybe order the sticky lens guards, and see how you like them. Be cautious because once the lens is scrratched (and it is super easy) you need to send it back to the factory
@PatrickDelorenzi After finding a couple of tiny specs of dust made their way under front lens guard during application, I decided to remove the guards. Just those tiny dust specs ruined a shot I wanted that was back-lit by the sun on a pure, blue-sky day. I bought a 2-year protection package for my camera. So, I'm not too worried, but I'll remain very careful with it, regardless. Thanks for your response!
Hello Lesley, for moto i would recommend the Moto Mount you can see in this video ruclips.net/video/8M84Gl-aHCY/видео.html This is the link to the product store.insta360.com/accessory?insrc=INRZXYB
This is so far is my 1st choice since I start which one is the best location and fittings to be fixed camera during my cycling thanks for info.Cheers from Isla Filipinas
Hi! No, but maybe check out the new bike bundle clamp mount www.insta360.com/sal/x4?INRZXYB Honestly though, I don’t use mounts anymore, I just whip out the camera, fix it between my hand and the handlebar, film 30 sec - 2 mins then put it away
Hi Patrick, I've bought the motorcycle mount bundle. It's very sturdy and fits well on my gravelbike bar. Unfortunately I fell and the camera broke off. It still works but there's a crack at the bottom. I bought an Alanzi alu frame so I can still use it. You mention in this vid that the camera must be mounted parallel to the ground but in the vid it's not. Does that mean that the camera comes lose due to bumps? Greetz again Ab
Hi Patrick, thanks for this review. I'm thinking of getting this mount for my roadbike. Made some nice shots with the selfiestick. But as you mentioned it is a bit dangerous. Which mount would you advise for gravelbiking or mountainbiking? Greetz from the Netherlands!
Hey ADG, personally I would get the Motorcycle mount bundle because it allows the most versatility of use and is much sturdier; only con is it weighs a little bit extra but personally when I ride even just with a small back back it makes no difference. For filming hard core mountain bike a friend of mine used heavy duty Velcro strips and would stick the pole on the sram and straight out front ✌️ Only thing, get the original or a really sturdy moto clamp because otherwise less quality products will just slip; here is an affiliate link for the accessories, there might be a discount store.insta360.com/accessory?insrc=INRZXYB
Hey Clarence, they have a much better version of this mount now that is integrated with the stem cap; have a look at it on the website store.insta360.com/accessory?INRZXYB
Hey Firdaus sorry I missed this comment! No unfortunately only round - you could look at the motorcycle mount which has a clamp that is more adaptable, but is super heavy unfortunately
@@PatrickDelorenzi Regarding the Garmin cycling computer mount, all the mounts seem to have the three prong Gopro mount underneath which won't work with the third person mount. I need a Garmin mount with two prongs underneath to attach. Do you know if there's anything that will help with this?
Hey erick! I personally use the Motorcycle Mount Bundle that you can find in the accessories here: store.insta360.com/accessory?insrc=INRZXYB it is super stable even on uneven terrain; Be careful not to clamp it to hard on carbon
I bought the third person mount but it didn't fit with garmin at the same time. I had another aero garmin mount also it didn't fit with that. Actually I don't know how to solve that problem
Are you using giant handlebar? I am using the Giant Contact SL XR Dfuse Bar which back sweep immediately after the stem section, therefore everything I mount on the handlebar do not sit straight. I am wondering if the insta360 handlebar mount would fit normally on my handlebar.
Hey Sudip - for motorcycle i can recommend the "Motorcycle Mount Bundle" that you can find in the accesories section store.insta360.com/accessory?insrc=INRZXYB I have it and it is MEGA sturdy, a lot of different angles, definitely a must buy
I have an aerodynamic handlebar which makes this type of mount unusable, do you have any other mount recommendation that can capture this kind of angle?
Yes you can use the original selfie stick as stated in the vid, but I wouldn’t use it fully extended as it might weigh a bit too much; there is one shot which is a bit of a tiny planet style in the vid, and I did exactly that - the mount was at 90 degrees pointing straight up. Only problem is the pole, depending on your bike setup, is quite literally where your face is lol so maybe you can’t do that forever, but for a couple of minutes (or if you’re on a relaxed / city bike even longer) it can work 👍
You could potentially rotate it on the screen but to be honest I never look at it, you just test it a few times and then you alway la know more or less what the angle is going lo look like ✌️
@@PatrickDelorenzi another question mate with the hdr video does it still have stabilisation I have a osmo action 1 and if u usd hdr video on the bike the footage is very jumpy not that stable. So how does the hdr footage turn out on the insta 360 x3 if riding with it is it stabilised or would it be like my osmo action 1 where it's not really suitable for shooting in hdr on the bike if that makes sense
Hey Choa! Oh no! I think it would work with any 360 camera from insta360, but can't be completely sure about it; If you need a mount fast another one I use is the Motorcycle Mount Bundle from the accessories list store.insta360.com/accessory?insrc=INRZXYB it's mega sturdy, works great, offers a lot of variety because you can angle it; only thing, it's a bit heavier so you can make your decision based on these things; happy filming
Not unfortunately; I think your best bet is getting a heavy duty Velcro strap or two and strapping the stick in the top part of the stem, pointing straight out in front
@@PatrickDelorenzi thanks for the advice. As integrated set ups are becoming increasingly popular, hopefully something will come out! Since posting I have found one possible option with the HSU gopro extension kit. It's the only thing with potential though. Thanks again.
Hi! You can attach the garmin to the handlebar mount with this adapter www.ubuy.co.it/it/product/RKUM7ZCE-vundo-bike-computer-garmin-mount-adapter-rotating-stem-for-garmin-edge-500-510-520-530-800-810-1000 attached to the top slot on the mount
Know that my pole snapped and my Insta360 fell to the ground. Lucky the lens guard took the blunt of the scratches. When using this mount, you must slow down on bumpy roads.
Yeah not advisable, the instructions say not to do it - of course I did it lol took it off road with the gravel bike, no massively problematic sections but a couple of drops off rocks 🪨 Won’t be doing that again 😂
There should be another way to mount the camera. The rider looks like a cartoon character. Monkey tail mount I feel do a better job. Rider is not natural. Should introduce an " L" shape rod to get better quality pictures and videos.
In all your videos with this bike mounting you look hilarious, sorry but this is the truth, you have a big head and long arms. How can you say you love this mount when your videos are so "cartoon style"?
@@PatrickDelorenzi hey you want the movie and the photos ? When you ride more than 30km/h and have some shake all the plastic mount break. This is plastic so it break… I experienced it and when you see your 500+ fly through the sky you are not very happy. I’m not liar. I tend to think that insta don’t do action cam but only very very good ( I’m fully happy of the cam) cam for leisure and light activities.
Didn’t say you were a liar, just that that was your personal experience with this product that might have been faulty, I’ve used it a bunch with no issues
![How to film bike rides? 15 tips for filming cycling videos [Insta360 X4, X3 or X2, GoPro & phone]](http://i.ytimg.com/vi/a9LN7EwU4lg/mqdefault.jpg)
Just bought one. Can’t wait to use it.
Good day to you.
I am a senior rider on HONDA from Japan.
Enjoying touring ,camping and video uploading.
This is so nice 360 camera video
Awesome!!
Thank you so much for sharing!
Full supported !
Have a nice day my friend!!
Thank you for the comment! Have a great day bro 🔥
The production level of this video is 🔥, awesome mount!
Thank you Alex! 🙏
Noticed that your camera is diagonal. Is that ok or does it need to be completely horizontal? I have the same issue and thinking of returning it as I can’t fix it horizontal.
Wondering if this mount will fit on an aerobar handlebar?
For our MTB selfie videos, we used velcro + carbon fiber gopro selfie stick, plus superglue to lock out the joints of the stick. Carbon fiber was key... because ya know... grams count. ;)
Great tip 👍
The video looks great!
🙌 Thank you Yian! I love this camera + mount🔥
Hey thank you for the review. I am still wondering this mount would not fit to aero bars for the tri bike. I am riding p5x so do you have any recommendations for the mount? Kindly enlighten me pls. 😊😊😊
Hello Junseok, I woul try with the MOto Mount, but being very careful about clamping it on carbon components; i've clamped it to the seatpost with no issue. Otherwise you can just ride with the stick in your hand filming for 10-30 sec, it's what i do now. Here is the link to the accessories where you can find the Moto mount, i would buy insta360 direct as the oones you find online often do not hold up: the weight the mount needs to hold up is quite a lot store.insta360.com/accessory?insrc=INRZXYB
Great video! I do have a couple of questions. Do you use any lens guards? Do you use any manual settings for recording?
Hi, I used the sticky lens protector and the premiium lens guard on the x2, on the x3 i'm not using any, it's risky but the sticky lens guards really reduce the image quality. Be very careful and maybe order the sticky lens guards, and see how you like them. Be cautious because once the lens is scrratched (and it is super easy) you need to send it back to the factory
@PatrickDelorenzi After finding a couple of tiny specs of dust made their way under front lens guard during application, I decided to remove the guards. Just those tiny dust specs ruined a shot I wanted that was back-lit by the sun on a pure, blue-sky day. I bought a 2-year protection package for my camera. So, I'm not too worried, but I'll remain very careful with it, regardless. Thanks for your response!
are you using ultra wide setting or just wide? im planning on getting the x3..please help out a noob 🙏🏻🙏🏻🙏🏻
Ultra wide 😃
@@PatrickDelorenzi thanks..appreaciate it! 🙏🏻
Hello 😃
Quick question… Can you use the GoPro Hero Black 10 with this mount?
thank you for the video Patrick :)
Can we use this for motorcycle handlebar as well?
Hello Lesley, for moto i would recommend the Moto Mount you can see in this video ruclips.net/video/8M84Gl-aHCY/видео.html This is the link to the product store.insta360.com/accessory?insrc=INRZXYB
This is so far is my 1st choice since I start which one is the best location and fittings to be fixed camera during my cycling thanks for info.Cheers from Isla Filipinas
Hi kuya, check out the insta360 store they have a lot of new mounts that have come out
Have a look here at this affiliate link at the Bike bundle www.insta360.com/sal/x4?INRZXYB
How long is the pole? Just wondering how easily it will fit in a bag when you want to remove the whole set up?
if i remember correctly around 40cm
Great! Will this call fit on flat aero bars?
No.
Hi! No, but maybe check out the new bike bundle clamp mount www.insta360.com/sal/x4?INRZXYB
Honestly though, I don’t use mounts anymore, I just whip out the camera, fix it between my hand and the handlebar, film 30 sec - 2 mins then put it away
Hi Patrick, I've bought the motorcycle mount bundle. It's very sturdy and fits well on my gravelbike bar. Unfortunately I fell and the camera broke off. It still works but there's a crack at the bottom. I bought an Alanzi alu frame so I can still use it. You mention in this vid that the camera must be mounted parallel to the ground but in the vid it's not. Does that mean that the camera comes lose due to bumps? Greetz again Ab
Would it fit for aero flat bar?? Any recommendations for flat bar?
nah wont
Hi Sir. do you that bike handle bar is compatible for 360 one x3?
Hey Ding! Yes I think it’s compatible (I have used it with the x3). Just make sure you don’t go off-road or drop off rocks given the added x3 weight
Does this mount work with a flat aero bar that only has a tubular design in the drops?
Hi! No, only round bars
Hi Patrick, thanks for this review. I'm thinking of getting this mount for my roadbike. Made some nice shots with the selfiestick. But as you mentioned it is a bit dangerous. Which mount would you advise for gravelbiking or mountainbiking? Greetz from the Netherlands!
Hey ADG, personally I would get the Motorcycle mount bundle because it allows the most versatility of use and is much sturdier; only con is it weighs a little bit extra but personally when I ride even just with a small back back it makes no difference. For filming hard core mountain bike a friend of mine used heavy duty Velcro strips and would stick the pole on the sram and straight out front ✌️ Only thing, get the original or a really sturdy moto clamp because otherwise less quality products will just slip; here is an affiliate link for the accessories, there might be a discount store.insta360.com/accessory?insrc=INRZXYB
@@PatrickDelorenzi thank you. I will order the motorcycle mount. Keep you informed
Is the gps computer still visible with the mount? Are the mount and gps computer able to pe placed both on the handlebras?
Hey Clarence, they have a much better version of this mount now that is integrated with the stem cap; have a look at it on the website store.insta360.com/accessory?INRZXYB
can you fit this mount on flat aero handlebar on some road bikes? BTW this video is incredible!
Hey Firdaus sorry I missed this comment! No unfortunately only round - you could look at the motorcycle mount which has a clamp that is more adaptable, but is super heavy unfortunately
Great review nicely done! Thanks for the video 😊😎
🙏🙏🙏
Thanks for the review. Do you think this would work with a standard Garmin bike computer mounted on the handlebars at the same time?
Not at the moment because it’s in the front, but we are working on a solution
@@PatrickDelorenzi Regarding the Garmin cycling computer mount, all the mounts seem to have the three prong Gopro mount underneath which won't work with the third person mount. I need a Garmin mount with two prongs underneath to attach. Do you know if there's anything that will help with this?
@@gnatman1102 Hey Gnatman! unfortunately i don't think it exists at the moment
Very nice video! What mount do you recommend for a mountain bike going on non flat gravel? Thanks bud!
Hey erick! I personally use the Motorcycle Mount Bundle that you can find in the accessories here: store.insta360.com/accessory?insrc=INRZXYB it is super stable even on uneven terrain; Be careful not to clamp it to hard on carbon
I bought the third person mount but it didn't fit with garmin at the same time. I had another aero garmin mount also it didn't fit with that. Actually I don't know how to solve that problem
Just wondering. Say you’re out for a long ride and you don’t want to have the long stick out the whole time. Where would you store it?
I usually just unscrew it and put it in my back jersey pocket 👍
can you still mount the garmin mount inside it
Great video. Could you tell me, how thick is the stick?
like less than 1 cm
@@PatrickDelorenzi ok thanks 😊
Are you using giant handlebar? I am using the Giant Contact SL XR Dfuse Bar which back sweep immediately after the stem section, therefore everything I mount on the handlebar do not sit straight. I am wondering if the insta360 handlebar mount would fit normally on my handlebar.
As a matter of fact - yes I am! I thought it wouldn’t mount either, but it did haha
I designed and 3d printed my own mount for the other camera - GoPro Hero Max.
Can we use this mount on motorcycle??
Hey Sudip - for motorcycle i can recommend the "Motorcycle Mount Bundle" that you can find in the accesories section store.insta360.com/accessory?insrc=INRZXYB I have it and it is MEGA sturdy, a lot of different angles, definitely a must buy
Can it be mounted on montra trance hybrid bikes
Great review. How long is the pole?
Around 30cm more or less
This pole it’s compatible for Go Pro Max?
Is it possible to atach the X3 directly on the mount, without usign the carbon pole? Want to use in MTB without the extension pole.
Yes
I think there is an updated Mount now in the “bike bundle”
Hi Patrick, how about Insta360 one RS camera? have you try this? I wonder can this hold the weight? One RS seem to be heavier then One X2.
I think it should hold it up, it’s really sturdy and doesn’t slip
@@PatrickDelorenzi Hey, this mount really good. It did hold well and didnt slip. very happy :)
I have an aerodynamic handlebar which makes this type of mount unusable, do you have any other mount recommendation that can capture this kind of angle?
I would go with the Moto Mount bundle BUT you need to check if the clamp will work - send me a pic on Instagram dm
Nice mount! Can I ask what’s the dimension (width) of the wildest part that goes on the handlebars?
Hey JR I need to measure it but i would say like 10-15cm
@@PatrickDelorenzi if you have time and can measure exact, that would be great!
Hey JR, it's 8cm at the widest point 🙌
@@PatrickDelorenzi thanks so much Patrick, a critical dim that will help me determine if it’ll fit my current bike setups!
Can you use the original selfie stick on this bike attachment? I wonder if standing at perpendicular to the ground would work for above the headshot
Yes you can use the original selfie stick as stated in the vid, but I wouldn’t use it fully extended as it might weigh a bit too much; there is one shot which is a bit of a tiny planet style in the vid, and I did exactly that - the mount was at 90 degrees pointing straight up. Only problem is the pole, depending on your bike setup, is quite literally where your face is lol so maybe you can’t do that forever, but for a couple of minutes (or if you’re on a relaxed / city bike even longer) it can work 👍
How do u change the view when riding to film your self or have it facing forward not facing u how do u do that with it while riding?
You could potentially rotate it on the screen but to be honest I never look at it, you just test it a few times and then you alway la know more or less what the angle is going lo look like ✌️
@@PatrickDelorenzi do u edit it after to adjust what way the camera is facing
Yes 👍 check out the latest video on the x3 I made to see what the app looks like, it’s super easy ruclips.net/video/oN4c7YNvJqM/видео.html
@@PatrickDelorenzi another question mate with the hdr video does it still have stabilisation I have a osmo action 1 and if u usd hdr video on the bike the footage is very jumpy not that stable. So how does the hdr footage turn out on the insta 360 x3 if riding with it is it stabilised or would it be like my osmo action 1 where it's not really suitable for shooting in hdr on the bike if that makes sense
Same as normal footage - the only problem with active HDR is low light situations, for others it’s ok in my experience
What about aero bars, will it work?
Hey Kevin, it will only work on round bars
Ohhhh boy!
Cool bud, do you think this would work with the GoPro max with the correct adapter?
I was going to buy this buy their out of stock. And I’m not sure if it would work with the one r.
Hey Choa! Oh no! I think it would work with any 360 camera from insta360, but can't be completely sure about it; If you need a mount fast another one I use is the Motorcycle Mount Bundle from the accessories list store.insta360.com/accessory?insrc=INRZXYB it's mega sturdy, works great, offers a lot of variety because you can angle it; only thing, it's a bit heavier so you can make your decision based on these things; happy filming
Patrick do you have a link for this mount please
If they still have it it will be here store.insta360.com/accessory?INRZXYB
What about front video footage as opposed to facing the rider?
With the x3 it will be great 👍 Like a regular action cam
Have they got one for integrated bars?
Not unfortunately; I think your best bet is getting a heavy duty Velcro strap or two and strapping the stick in the top part of the stem, pointing straight out in front
@@PatrickDelorenzi thanks for the advice. As integrated set ups are becoming increasingly popular, hopefully something will come out!
Since posting I have found one possible option with the HSU gopro extension kit. It's the only thing with potential though.
Thanks again.
Mtb gidonuna olur mu?
What extra adaptor part do I need to enable wahoo bolt v2 to be connected to the top of this mount please, anybody done this?
can it fit bmx bar
Can you buy the carbon fiber pole separately?
hey 0 views! I dont' know to be honest, I don't think so. Imho the normal selfie stick is better and more versatile
Only issue I see is I have to remove my cycling computer bracket when using this.
I agree - you can check out the Moto Mount bundle on Insta360, I’ve made another video about it; it’s a bit heavier but allows a lot more freedom
But how about the outfront mount bike computer?
Hi! You can attach the garmin to the handlebar mount with this adapter www.ubuy.co.it/it/product/RKUM7ZCE-vundo-bike-computer-garmin-mount-adapter-rotating-stem-for-garmin-edge-500-510-520-530-800-810-1000 attached to the top slot on the mount
www.tradeinn.com/bikeinn/en/magic-shine-mj-6273-adapter-for-garmin-to-gopro/138288256/p
Would this fit a flat handle bar?
If the diameter of the bar is within the values mentioned in the video I would say yes 👍
Has room for improvement with more durable parts. Would love to see it doubled or tripled in length.
Double lenght would be sick
Too long, might be hindrance to the steering.
Wouldn’t be very safe…
Know that my pole snapped and my Insta360 fell to the ground. Lucky the lens guard took the blunt of the scratches. When using this mount, you must slow down on bumpy roads.
Hmm, that won't work with a TT bike because of the oval handlebar. I'll just try taping the selfie stick to my aero bars.
just got mine today
How’s the footage after exporting bro?
I’m planning to get one
Check out the new stem mount, in my opinion it is better in 2024
👍
🍿🍿💫🦾
Don't use it for MTB as it drops onto the front tire no matter how much you tighten the wing nut.
Yeah not advisable, the instructions say not to do it - of course I did it lol took it off road with the gravel bike, no massively problematic sections but a couple of drops off rocks 🪨 Won’t be doing that again 😂
There should be another way to mount the camera. The rider looks like a cartoon character. Monkey tail mount I feel do a better job. Rider is not natural. Should introduce an " L" shape rod to get better quality pictures and videos.
It’s not a problem of the mount location. That’s lens distortion and can’t be eliminated completely because of the laws of physics
Never mind Patrick, I've just read a couple of reviews on Amazon. No way I'm gonna buy this mount
In all your videos with this bike mounting you look hilarious, sorry but this is the truth, you have a big head and long arms. How can you say you love this mount when your videos are so "cartoon style"?
still many of you hate made in china? that is band from china as well
I hate made in china. Stick to gopro. Go on pay this hacks. Chinasucks
Don't buy it it's plastic. So It break when you ride.
Not true, mine is still fully functional. Don’t spread false information please
@@PatrickDelorenzi hey you want the movie and the photos ? When you ride more than 30km/h and have some shake all the plastic mount break. This is plastic so it break… I experienced it and when you see your 500+ fly through the sky you are not very happy.
I’m not liar.
I tend to think that insta don’t do action cam but only very very good ( I’m fully happy of the cam) cam for leisure and light activities.
Didn’t say you were a liar, just that that was your personal experience with this product that might have been faulty, I’ve used it a bunch with no issues
@@PatrickDelorenzi I’m not only one… unfortunately. Lot of people complain about that.