WWW.RTF-HELI.COM - REVIEW 2.4GHZ WALKERA V450D03 FLYBARLESS 6-AXIS BELT CP R/C HELICOPTER
HTML-код
- Опубликовано: 6 ноя 2024
- THIS IS AN UPDATED VERSION OF THE 2.4GHZ WALKERA V450D01. A HUGE IMPROVEMENT CAN BE NOTICED IN THE 6-AXIS GYRO INTEGRATED INTO THE RX. MAKING FOR SUPER STABLE FLIGHT PERFORMANCE. THE NEWLY DESIGNED AIR-FRAME IS MADE OUT OF PLASTIC CARBON FIBER PARTICLES MAKING FOR A VERY STRONG AIR FRAME. THE ROTOR HEAD IS A COMPOSITE OF METAL AND PLASTIC CARBON FIBER. POWERED BY AN UPDATED 3,500 RPM/KV BRUSH LESS OUT-RUNNER AND 40-AMP ESC OFFERING PLENTY OF POWER WHEN NEEDED. THE NEW ALL CNC METAL SWASH PLATE OFFERS PRECISE CYCLIC CONTROL WITH THE METAL GEAR SERVOS. THE MAIN GEAR, MAIN SHAFT, BELT, METAL GEAR SERVOS, AND OVER-SIZED TAIL SERVO ARE THE SAME AS THE LEGACY V450D01. THE CANOPY IS BEAUTIFULLY DESIGNED FOR THE NEW AIR-FRAME. THE CARBON FIBER BLADES ARE NEWLY DESIGNED WITH MORE VISIBILITY WHEN FLYING. GET THIS AS A BIND AND FLY AS IT WILL WORK WITH THE DEVO 7, 8/(S), 10, AND 12/(S) TRANSMITTERS.
VISIT US AT: WWW.RTF-HELI.COM
Thanks for responding. My reference to lack of power is related to all around low rpms compared to the videos I've watched.
Cory, I'm assuming that the folks that posted this video sell the product and parts so I have removed a couple of references I had posted on here after thinking about that. However I will simply say that there are several U.S. suppliers of Walkera parts that are dependable. I have about 4 Walkera helis (2 X V400D02, a Master CP and a Genius CP. I've never had to order anything from outside the U.S. and never taken over a few days to get the parts from the suppliers I use.
The Master CP has the 6 axis system...it is a dream to fly even with brushed main and tail motors. I am about to order this heli BNF and sell the two V400's and another CopterX bird I have I think.
They are not quite as easy to fly as a fp bird as they are more responsive and go where you point them, however the collective pitch 6 axis fbl gives you a much more "connected" feel and handles wind much better than any fixed pitch bird can.
Yes it's the best lowest cost using the 6-axis gyro technology which is incorporatedin the RX. Other units require the RX and then a separate flybarless controller (typically 3-axis to 6-axis). Thereis only so much space on a 450 size helicopter. Less wires and less mess when its all in one device. We used the same Walkera RX on an ALIGN TREX 450 PRO DFC and it works great.Plus when we did this we used the same DEVO 7 TX. The Spectrum TX's are really too expensive.
These are amazing helis for the price. I can't believe Walkera stop making helis.
Great reviews, but really wish you would fly with the canopy on.
James Williams I was always taught, when flying a new heli, leave off the canopy until becoming competent. Good advice, when you consider the likelihood of the canopy getting smashed in the unfortunate event of a crash. ;-)
The DEVO 7, 7e, 8s, 10 12s, F7 can work any WALKERA based DEVO 6-channel CP Helicopter such as the Walkera Genius CP V1/V2, Master CP, V400D02 as well as the Quadcopters like the Lady Bird V1/V2, Infra X, QRW100, QRW100s, Hoten X, and new QR-X350 GPS Drone Quadcopter. ONE TX for flying these nice DEVO based Helicopter and Quadcopters. The DEVO 7 also has Memory slots to store parameters for each helicopter.
The ESC should not get hot unless you just did a lot of aerobatic flying with a lot of spins and turns. If your ESC is getting too hot on normal flying maybe the messhing between the main motor and main gear is too tight. Loosen motor to mesh with main gear in which you should be able to easily sping the main rotor easily. You should be able to get 2-3 full rotations with the flick to your wrist on the main rotor. Make sure all of your ESC wires are connected properly- no loose wires..
i love that kind of rc heli.
Wondering what is your Program Mix setting is on?
Thanks for the help im looking at the blade nano cpx and the blade 130x. :D Im using my uncles sim "realflight 6" I think. I'll make sure to show you if once i get something and thanks for your help.
(heli-max recommended maybe?)
I have a flight sim and can do tic tocs, rolls, flips, and just about anything you can think of on it. I just want to get in to real 3D flight taking slow steps working my way up. Thanks for advice though :D
Thanks for asking. Yes, you should be able to convert your blueray into a Walkera V450D03. They don't make the Blueray anymore so we can't officially tell you it will work properly, but if the Main Shaft is the same as the V450D03, you should be able to convert this into a flybarless belt CP. You need the V450D03 Rotor Head, Main Shaft, ball linkgage set, stabilizer holder, swashplate, and the new RX2703H-D. Goto the Walkera V450D03 spare parts at: RTF-HELI.COM. Let us know if it works ?
We are located in the U.S.A. The shipping/handling costs can be high to deliver from the U.S.A. to the Philippines. Try a Walkera Dealer that is closer to you. Try helimonster - they are located in Japan.
Hey brother you still out there? I am talking about the guy who made this video. I have owned about 2 Walkera
V450 D03 and I love them to death. I think they’re great for beginners because of the 6 axis self leveling which is unmatched compared to any other 450 rtf 6 channel
Flybarless collective pitch helicopter.
Hand down walkera May have not cornered the market with RC helicopters
But it definitely kicked some serious ass.
Now for the big question ok?
Can I use the integrated receiver and gyro mix on other 450 helicopters even different sizes let’s say 550 trex.
I want to know because the self leveling system would help alotz.
Thank you so much.
I would highly recommend those "nano" RTF's from a reputable "original" brand. Not a "copy". Blade nano or 130 is an awesome starter.. Decent spektrum TX can be used for bigger heli's(although Futaba is best). They are "basically" crashproof. Anything in 450 size is highly dangerous and expensive crash. Then if you should continue in the hobby, you got a good Tx for your next heli. Also, buy a "real" sim $100+. Enjoy.
How similar in flight characteristics is this to the Master CP? I notice many other collective pitch helicopters have a much different feel now that I’m used to the Master CP.
Hi I have this helicopter but struggling with the throttle and pitch curve for normal flying can you please give me the setting thanks.
thax.... It may be cheaper to just get this copter since i will also need a devo7...and i have zero cp setup experience...thax
Can you tell what are your settings please
Im looking for a heli that can do basic CP control would this work? Anything helps if you could tell me what to look for a starting 3d heli.
Hi There,
Could you please tell me you Devo7 setting for Walkera v450d03?
I bought this heli with devo7 and tried to fly it but got crash because Devo7 iat not setup good enough with heli. Although the manufacturer promised RTF. As beginner i need your help.
Many Thanks in advance
Regards
Sam
I have only experience with fp heli such as exceed madhawk ,nine eagle free spirit and afew micro single blade 45* flybar heli's...I have a exceed blu ray 450 which i am affraid to fly... It has normal gyro which is not self righting like this one is...I wonder if i could convert my blue ray to 6 axis...If so what would i need to buy? thanks
Hi, Great Video - awaiting my order now. Can you tell me if Master CP settings will work with the V450D03 on my Devo7?
Many thanks!
+Guitar101 Yes, the settings are pretty much the same but you will need to tweek the pitch curve and throttle curves as this is a larger bird than the Master CP. Otherwise the settings are the same.
wich one the best 6 channels heli rc to order, what you think? i'm thinking about to order a 6c one..thinking about the t-rex 250, let me know what you think..
Hi there, thanks for the review. Id like to ask you about the Devo7 transmitter please. Im not great with the technical side of things, so, the binding and programming process seems a little intimidating to me, especially when all the reviews complain about the poor English written within the instruction manuals.
So, if i purchase the RTF package, does the Devo7 come ready bound and programmed?
Lee Cross Depending on which package you choose. Some Walkera V450D03 packages come with the DEVO 7 and some do not. Typically, the RTF version comes with the DEVO 7 programmed to your V450D03. The BNF version typically doesn't come with the DEVO 7 as some user's already have a DEVO 7. The DEVO 7 can be programmed to run several different Walkera Helicopters and quadcopters as it has memory slots to store the different models which is really nice. One TX to control different models. You save money by purchasing the BNF Version.
RTF HELI COM Thanks for clearing that up for me...The D03 RTF package seems like a practical way for beginner/intermediate pilots, like myself, to enter the 450 class market without breaking the bank. I'm sold ! :-)
Helo 7RTFHELI pleas can you tell me if the walkera V450D03 flybarless heli will bind with the new walkera devention devo 12s transmiter
The only thing is i have a Thunder tiger raptor sitting in my garage that was my fathers before he gave it to me and i just want something to get me to that point
I got a question for you ? I see your battery have XT 60 plug , and you have a converter to walkera banana! I have somting simular "XT60 to T plug. Where can i buy this converter like you got! plz help me.
i cant find it online, i would like to have the one you got.
Thanks for the feedback ill look in to it :D
Never ask a salesman what I need? My advice as a fellow pilot with 5+ years experience(trex 450, 500) with over 5000+ flights. If you are starting you will be "crashing" a lot. A heli that is robust can fix over/over, and still fly like brand new. Like a piece of appliance. Walker is not proven to be that. An excellent cheap starter, but you will eventually spend more for better. Better heli, electronics and controls. Period.
Hello again , hope your having a great new year! Can you tell me if the canopy fits the v450d01? is it exact fit?
I have an walkera v450d03.witha devo 7 trans. When I try to land it just slams down real hard. Is Thera way that I can set the transmitter to let the heli land down softly?
Yes, you have to much negative PITCH at Zero throttle. You need to re-adjust the PITCH settings on your DEVO 7 TX or re-adjust the two long linkgages on the flybarless head to less negative pitch. Using the DEVO 7 Method, get into programming Mode. (Press ENT) Move using your (UP/DN) to the FUNCTION Menu. Press ENT. Move down to PITCRV. Press ENT. Chane your POINT (P-L) to slightly more positive. Increment by 5%. Press EXT to store. Typical values for PITCH Settings are: PL=-5, P1=INH, P2=INH, P3-INH, P4=INH, PH=45%
You have too much negative PITCH. Get into programming Mode and get into the PITCH CURVE MENU. Adjust the Pitch Points to be more positive. Increment 5% at a time for each POINT-L, 1, 2, 3, 4, H. Make sure all points are linear in nature.
RTF HELI COM can you make a video of how you have set up your remote I have devo 7. I’m lost coming from a spectrum dx6i I’m very confused of how the devo 7 is
RTF HELI COM would really appreciate if you make a video of how you have this setting on the devo 7
You remind me of the guy in Armageddon that had too much coffee.
Nice review & nice Flying!
does the devo trans also fly the other smaller cp walkeras such as master cp and and genisus v2?? thax
also can you switch 6axis off if you are learning then if you are losing control switch back to 6 axis and have it self level and get you out of trouble? is it a toggle switch with on/off or 3 position switch? thax...PS this seems to be the best cp in this 450 class for the price..no one else i know has a 6 axis gyro
hello my friend, I have a helicopter WALKERA V450D03 I have the same problem. The main shaft plays upside down has gaps and so go up and down and the main gear, my I have replace 2 times why spoil what you will now do to fix this problem, I also want to ask you do you know if it fits tail of T REX 450 in VALKERA? can you HELP ME? what I will now do to build ?? and now suddenly I give GAZI just flipped the tail, (as do sometimes when they are on the ground and whirl lawn launch and spin) I have not hurt anything is with the factory settings
+Emirete Angel Sorry can't understand your English. The Align Trex 450 tail section is Gear Shaft Driven and will not fit the Walkera V450D03 as it is belt drive driven. If the helicopter spins upon take off, you need to readjust the tail section. You can try to readjust the servo arm for the Rudder Servo and/or readjust the trims for Rudder on your Transmitter. This is a process of trial and error until the rudder section doesn't spin the helicopter upon take off. Use the Rudder Trim on the TX as that is the easiest way to quickly try to rectify the problem.
I really want to order this before they become extinct.. My problem is the flight time.. I have been reading like 8 mins? Didn't the old E-Razor 450 fly for up to 20 mins? Is there a battery upgrade I can do if I purchase this? 8 mins seems very short for a helicopter of this price range.. I don't like the shake when spooling up and down as I have read that the plastic pieces that the Rotor blades attach to is the cause of this issue.. I have yet to buy one of these choppers.. I have been wanting one in the 450 size range for years now.. I think it's time I step up and buy one.. Any help would be appreciated on Battery upgrades.. I have also read the stock charger is not very good, or more less slow not that it's a bad charger just not really intended for the battery size.
What battery power are you using
I have a 230sv2 and it flys excellent i'm looking for a bigger heli thats easy to fly like that one?
I have not found one - this is one smooth flying heli
With that said, I've read that there are now 6 axis gyro's being sold, and so perhaps there is a way to customize larger birds to fly the same way.
Though I must admit, the V450D03 is one of the best RTF heli's I've ever owned - I currently own two of them btw
Where did you get that xt60 adapter? Im having a hard time looking for a battery with same connector as v450d03 stock battery. Tnx
Simply solder on any type of connector you need to the ESC.
Need help with my rotor gyro. My V450D03 spins in circles when I am about to take off the ground. Don't know how to set my rotor gyro. When you turn the helicopter left or right by hand. My rotor gyro isn't working both ways. Where do I go into my settings with the Devo 8S for rotor gyro? I have a RX2703H-D receiver.
+Scott Miller Thanks for asking. Was your helicopter working before you had this problem? Did you crash?
+RTF HELI COM Let me start from the beginning. I have the Walkera V500D01 helicopter that came with RX2702V-D receiver. A servo went bad and blow my receiver out. So I had to buy the RX2703H-D receiver because they stopped making the RX2702V-D receiver. Now the RX2703H-D receiver works great on my V450D03 helicopter, but when I put it on my V500D01 helicopter it spins in circles. Yes I have crashed it and replace the tail rotor. So maybe I have done something wrong. I thought it might be my gyro setting because when I rotate it back and fourth. My tail rotor only works one way.
Point taken im looking with a budget of around 400$ and just found this poking around Thanks for the advice though
Is this a good hell and does it have a lot f spare parts looking to get one
can you please tell me which battery you used, i dont know what batterys fit into the v450DO3 thx
Ok, I am sold on this 6 axis 450 bird, how much is it, and where is the best place to buy walkera birds and get good after sales service? I am a blade customer and they have excellent customer service. I also am a T-rex 500 owner and I have good sources for parts for my align. That bird looks amazing, I wish it was CNC parts.
Thanks for asking. The Walkera V450D03 with the DEVO 7 TX is $399.99. Walkera Service is limited to China meaning that they don't have any official service center in the USA. You would need to ship it to China for repair work which is expensive. Horizon Hobby sells their helicopters expensively, but they can service your bird in the USA for low shipping costs. So if you are proficient in repair work, which to fly this bird, you should be, then you should only be interested in spare parts and CNC Mods, but that's your choice. I don't like Eflite Blade, because they are really expensive and I can repair this bird myself.
The Walkera V450D03 has a CNC Metal rotor head set offered by Xtreme Productions. It is a DFC Metal Head that we sell as a Mod for this helicopter.
awesome thanks
awesome thank you
Hello, please tell me the parameters of the battery, which costs or can you link to the battery ... ???
For this R/c Walkera Helicopter, you will need a 12.1 Volt 2,500Mah Lithium Battery. The end connector is a 3.5mm battery connector. This battery should give you about 12-15 minutes fly time.
Hey guys! !!! I got V400 and want to know the best transmitter settings for this V400...? I PUT UR BRUSHLESS convertion kit on it I HAVE a devo 7 and devo 8 touch screen. When I spool up it starts out smooth then jumps up in speed ...like it spins FAST and I'm not even half throttle! !! Can u help me with the settings so it will spool up evenly and smooth again...??thanks
My WALKERA "V450D03" is new, and i can´t use it because there is a great PROBLEM: - i turn on the radio (DEVO7), the battery on the Heli, I try all the commands with the throttle at low speed, then i throttle all down and trigg the "HLD Button" (Throttle OFF). THEN IF I MOVE IN ANY COMAND (RUDDER / ELEVATOR / AILERON) THE ENGINE TURNS ON AT LOW ROTATION AND ONLY I CAN STOP IT BY TURNING OFF THE BATTERY (
including the "Throttle HLLD" does not act). I ALREADY SAW ALL THE CONFIGURATIOS OF THE RADIO. AND I CANNOT DETECT THE CAUSE OF THIS PROBLEM.
I tried by all means to contact WALKERA itself but they don't even answer for more than I insist. And it's quite weird that on the official Walkera website (www.walkera.com). have nothing on YOUR Helicopters, they only deal with Drones.
as I am still inexperienced in RC Helicopters I honestly don't know how to SOLVE THIS "PROBLEM" VERY Weird, I never heard of anything like it.
CAN SOMEONE HELP ME? THANK YOU
Walkera stopped selling R/C Helicopters many years ago in favor of R/C Drones. You have a very old helicopter and spare parts are not being made by Walkera anymore.
does 6 axis stabalization make it easy to fly like fixed pitch birds?
Thanks for asking. Yes, with the new flybarless design and the software used in conjunction with the 6-axis design, flying this Collective pitched (CP) helicopter is the same as the Fixed Pitched (FP),but better because CP Helicopters can adjust to high wind conditions without being whisked away by the wind. The CP Design allows for this. The drawback -- be prepared if you crash the repair cost is higher as more parts are required with this complicated flying machine.
RTF HELI COM Awesome I have a brushless 6 axis stabalized wltoys v977 coming, It was inexpensive, and if I like the way it flys I am getting a 450 walkera with 6 axis stabalization.
cool thank you
The 6-Axis gyro technology is definitely more stable than a 3-axis. This makes flying better than a Fixed Pitched (FP) Helicopter, plus you have more stability in the wind versus a FP Helicopter. Both the Walkera V450D03 and Walkera Master CP utilize 6-axis gyro technology. The Master CP is a smaller 250 sized Flybarless CP Helicopter.
Mines won't take off it slapped back down to the ground please help
Change modes
What battery are you using...?
Nice job. Excellent
Hi please tell price
Je veux savoir comment faire UN helicopter
Is this easy to fly like the blade 230sv2?
I think its easier, as it is larger and more stable
I have a sim and the WL Toys V911 and have been trying to decide what larger size model heli to get next...I have been flying indoors on the WL Toys V911......I can now sport fly fairly well and notice the larger sim helis are easier to fly than the smaller sim models,..... I like the Walkera RTF 450 size and the Blade RTF 230 model.....does anyone have a recommendation for a beginner like me...thanks
Congrats! Sound like you maybe ready for a larger R/C helicopter. You can start with the typical 450 size helicopter. This type of helicopter should be flown outdoors as it's size makes it difficult to fly indoors. The classic Align Trex-450 is always a good start. With most 450 size, you usually end up assembling the helicopter. So, be prepared to be a mechanic in training. It's better to build and should take about 4 hours. When you build, you will know the exact parts when after you crash.Other brands to consider include the Tarot 450 and the Goblin 380 series. Blade is expensive.
WHERE IS "WALKERA Helicopters" ????
Either it is a GREAT SWINDLE or it DOES NOT EXIST !!!!!!!!!!!!!!!!
Everyone is SELLING "HELICOPTERS AND ALL THEIR ACCESSORIES" from the "WALKERA" brand ...... BUT WHAT A GREAT VIGARICE
After all what is "WALKERA" ????? A "FALSE FACADE" ?????
Otherwise oneooea