MASSEY FERGUSON 1835M and 1840M TRACTOR WALK AROUNDS | TIPS AND TRICKS | OVERVIEWS | UVCMASSEY.COM

We officially have added to our UVC Team an additional family member UVC product specialist, our oldest son Wesley Mann in TN. As an end user himself, Wes does a complete walk around and shows in this video an walk around, overview, tips and tricks of the Massey Ferguson 1835M and 1840M Series Tractors alongside with our son Ryan Tracy who is our GM for UVC Powersports Tractors and Outdoors here in Alvin, TX
We have a large inventory of Massey Ferguson Tractors in stock UVC Powersports Tractors and Outdoors Contact our Massey Ferguson product specialist son, Ryan Tracy 281-824-1198 for more info on all our Massey Ferguson Tractors.
Are you looking for a new Massey Ferguson Tractor?
UVC Powersports Tractors and Outdoors located in Alvin, TX currently has a great promotion and a fairly large inventory of new Massey Ferguson Tractors.
We are located in Alvin, TX just south of Houston and just north of Galveston. We are open Mon-Fri 9 am to 6 pm and Sat 9 am to 3 pm.
Visit us online at UVCMASSEY.com for more info and get pre-approved as well thru AGCO Finance.
Call 281-824-1198 for more info.

[@pilotman35]

Excellent video

[@lugster1nuts]

I'm picking up my massey 1835 tomorrow..can't wait ✋️

[@artabarzua1245]

I got my 1835 this year, it's nice for working on the snow.

[@johnmcdaniel5393]

i just bought the 1840m with deluxe cab, waiting for delievery!

[@mroakridgeboy9559]

I have a 2017 Massey Ferguson 1734e where is the hydraulic filter located

[@MikeCipperley]

I've always been a massey ferguson person for at least 60yrs yes I have massey tractors an 1150 V8 AG tractor and two garden tractors from the same years of the late 60s & early 70s.

[@pmaint1]

I can't believe these don't have a height control lever in the pto area.

[@davidhunt7649]

Bought a new 1835m. Hard to change ranges and even gears. Does it get better

[@patrickhelmick2807]

What is the price difference between the 1835e and the 1835m I can totally see a quality difference but wanted to know the price comparison.

[@rockydevon7500]

I have an 1835M. I don't know what the price difference is but it is worth it. The M is a joy to run. I spent most of my youth on a tractor about 30,000 hours of operation. This makes me actually enjoy using a tractor again. All of the tractors that I operated were more HP (50-80) than this one. That said I am amazed at how much of its power it can put to the ground. The loader operation is fast and smooth. I can pick up a big square bale on the front and one on the rear. It will lift high enough to just put big squares 3 high. They weigh about 1200# and it handles them well. I feed about 300 ton per winter of these.

[@natebrown6440]

I just got a 1840m, difference between the e and M was $7k, if that helps

[@kadeeambrose810]

Can you turn off where the rpms go up the harder you push on the pedal?

[@UVC1stop]

No, you cannot keep the rpm’s at idle when pushing the pedals down. Not allowing the hydrostatics to stay at idle when increasing speed is intentional, as it is hard on your hydraulic systems, i.e. pumps, motors, transmission, etc., to push your systems without optimal power.
You can on the other hand manually set your idle at higher rpms.

[@michaelridgeway2770]

Nice video but u didn't talk about the mid-mint 72' mower

[@jessestone9117]

I have a 1740 open I got 90 hours on it thinking about trading it for a 1840 cab tractor

[@ranchitosantos5165]

Which tractor is a better quality and more reliable tractor, Kioti or a Massey Feeguson?

[@donaldstrishock3923]

A Massey-Ferguson tractor is like A "Cadillac " compaired to a Kioti is like an " ole Dodge ". Massey-Ferguson ALWAYS HAS A BETTER TRANSMISSION, ENGINE ,and Highest volume hydraulic pump system, in every category.

[@ranchitosantos5165]

What is the lift capacity on the loader for the 1835m ?

[@michaelbolton2853]

Massey Ferguson FL2611 Loader
Height (to pin): 100 inches
254 cm
Dump angle: 55°
Clearance, level bucket: 93 inches
236 cm
Rollback angle: 42°
Breakout force (at pin): 2950 lbs
1338 kg
Breakout force (at 500mm): 2170 lbs
984 kg
Lift to full height (at pin): 1870 lbs
848 kg
Lift to full height (at 500mm): 1380 lbs
625 kg
Lift to 1.5m (at pin): 2220 lbs
1006 kg
Lift to 1.5m (at 500mm): 1750 lbs
793 kg
Bucket width: 66 inches
167 cm
72 inches
182 cm

[@ranchitosantos5165]

@@michaelbolton2853 i mean how much can they each lift? Sorry for my poor communication

[@michaelbolton2853]

@@ranchitosantos5165 No problem.
The lift capacity is going to be the same with both models. The diff between the two will be the engine hp and the pto out put.
Massey Ferguson 1835M Power
Engine: 36.2 hp
27.0 kW
Gear PTO (claimed): 27.5 hp
20.5 kW
Hydro PTO (claimed): 25.7 hp
19.2 kW
Massey Ferguson 1840M Power
Engine: 39.4 hp
29.4 kW
Gear PTO (claimed): 30 hp
22.4 kW
Hydro PTO (claimed): 27.9 hp
20.8 kW

[@ranchitosantos5165]

@@michaelbolton2853 awesome information! Thank you for your quick response and great detailed videos!!

[@warrenmaker798]

Would buy one tomorrow, but dont imort this model into Australia apparantly.

[@michaelridgeway2770]

Ha u should never cut grass in high, that's a good tractor.

[@JamesBond-be4cw]

Mmkay? Mmkay... 😂

[@jdboy9]

Mr Mackey?!?

[@georgecass8529]

Sounds like you will be doing more maintenance then work with Massey Ferguson .