Making Small Rudimentary Folding Knife
HTML-код
- Опубликовано: 5 окт 2024
- I use the fire welded small billet from the previous video to make a knife.
If you would like to donate any amount, click the Paypal donate button in the homepage banner. You can also Paypal directly to my email: gstongs@gmail.com or do so via Super Thanks below each video. Whatever the way I will recognize you for your donation in a video. For those who prefer, I also have a Patreon account: / gstongs
For Spreadshop (T-shirts, caps, hats, etc.) go to: gstongs.myspre...
Thanks so much. Glen
Since you used random scraps to make this billet, you should call it unobtainium, since you can never make an exact replication! Tony Stark will still be interested! Great video, Glen!
Hey Steven, You're donating faster than I can thank you! I'm already one shout-out behind... Dang if this unobtainium isn't super hard. I'm pretty sure it would be impossible for me to replicate so good name. The knife is nothing to write home about but it works. Thanks so much. 😬
You did a fine job. Not everyone can make a decent 'folder'.
Well Ron, this folder barely squeaks into the decent range but for me, it's baby steps with knives. Thanks.
Considering what you started with I would be very very pleased with that little gem.
With knives, it's baby steps for me. I'm happy with this billet I created and so I'll upsize and see if I can make something more practical. Having fun along the way so maybe that's most important. Thanks for sure.
Hairy Leg Vision?! LOL!!! Dude, you crack me up. Love to see you using that little billet!
I figured I needed to try using the billet since it was the first I created. Others have said I should etch the blade and it never occurred to me to even try that, that it was even possible. More hairy leg vision to follow. Thanks.
Man, I really love your videos, your style and the quality of what you make. Thank you very much. I learned a lot by watching you at work.
I appreciate your kind comment. I'll keep trying my best with my channel. Thanks.
Nice work, Glen!
Thanks Jim.
Came out OK, I like how you made the billet, might have to try that sometime. Knife certainly sharp, so a good outcome. Thanks Glen.
Knives really aren't my thing, that should be clear. But I'm pleased with the billet and so now it's time to upsize this and try a more practical folder. Thanks.
Nice job Glenn.
Thanks Derek.
That's a little beauty mate. Nice going.
With me, it's baby steps with stuff like knives. Thanks James.
Glen I enjoy your channel and watching you work. Keep up the good job!
I'll keep doing my thing. Thanks robert.
Cool little knife Glen 👍
My knife making leaves much to be desired but I'm making some progress for sure in certain areas. Thanks.
Glen always surprise me with videos using basic tools. Great video. Oh nice legs 😬🤣
I know that (good) knives really require a certain skillset / personality that I don't possess. But I'm making baby steps and honestly my wife using a couple of the more practical knives I made on a daily basis has given me confidence, a necessary ingredient... Thanks.
NIce! Very nice indeed! Thanks for posting.
It's very obvious that knives aren't my thing but I'm pleased with the baby step progress I've made. Thanks for sure.
Keep it up, love your style !!
Much appreciated. Thanks for watching.
Great work. Simple mechanism 😊
Knives aren't my thing but I'm making baby step progress and having fun along the way. Thanks.
That is an awesome little blade, brother!
You may want to drop the steel into a cup of strong instant coffee to etch it. That'll really bring out the Damascus pattern!
While I'm aware of etching, I really had no idea that this little blade could be etched to reveal a pattern - it being the first piece of "Damascus" that I ever created. I'm assuming I can dunk it in the instant coffee even now? I may try this since this is basically an experiment. Thanks my friend for the good suggestion.
@@gstongs you're welcome!
Yes, you can set it in the coffee now. I'd go fifteen minutes at a time, just to prevent etching too deep.
Nicely done.
Thanks for our support and again for your previous big donation.
@@gstongs you're welcome, I wish I could do more, I feel it's the least I could do after all that I have learned from you.
Not too shabby for a first go. have a go at trying a small sharp hot set chisel and put a thumbnail groove at the top of the blade to assist in opening the knife. I agree with the viewer who suggested a carbide drill bit for the hole, they will even drill through a file. Great little knife, make some more.
Yeah, this really needs the thumbnail groove otherwise I'm hesitant to close all the way. I really need to try concrete drills on hardened steel. Thanks Stephen.
Very nice!!!
Thanks for sure.
I found cheap carbide tipped concrete drill bits work well on hard tough steel
I discovered this when trying to enlarge the pritchell hole in my small anvil
I will give this a go as others have mentioned this too. Thanks for sharing.
I agree about stropping angle - it's common advice to maintain the same angle, and of course an excessive angle rounds the edge more - but deburring is most effective if a slight increase in angle (about 1-2°) is used.
I'm glad you agree. I just found this to be the case from trial and error. Thanks for watching.
Knife sharpening is something rather personal, everyone has an opinion and like backsides we all have one. In my opinion there is no right or wrong, only the result counts, how you get there is of no consequence.
No doubt about it each person has his or her own way when it comes to sharpening. I've just gotten better results with a steeper final honing angle but this also depends on the blade and some other factors. Thanks.
Woolly G's prison shank😅😅😅😅
My knives are certainly nothing to marvel at but if you had this little baby in prison you'd be like an arms dealer!
Hints of a real blade-maker are showing.
Very small hints, barely perceptible... Thanks Robert.
Stupid sharp indeed. Do you use a strop or just the buffing wheel?
Just the leather wheel as shown. And this little piece of steel I created holds an edge well. Thanks.
عبقري مرحبا بك ❤
What is the point of forge welding different steels in a bullet and making a knife out of it when You don´t reveal the texture by acid etching at the end? Also, not being able to fold the knife all the way down and hide the sharp tip could be very dangerous in use... Sorry for the criticism but I mean it well. I hope You consider it constructive on your way to becoming a better knife maker...
Hi, I can fold the knife all the way down but since I hadn't yet put a thumbnail groove in the blade, it would be hard to open. As for the forge welded piece of steel I created, I never made Damascus before and don't really know (I have an idea) how to etch. This was really just a test and I like showing my experiments, even semi-failures. And I don't mind constructive criticism at all. Thanks for sharing.
@@gstongs OK, well, standard precedure for etching is to mix 1:10 feric chloride with water and let the knife sit in it for couple of minutes. Then wash in water. Finaly, you can put it in a very strong solution of instant coffee to enhance the contrast 🙂
My only disapointment was that you didn't etch the blade. After all what's the point of making pattern welded steel if you can't see the pattern? 😀
Hi vern, you're the third or fourth person to say that. Quite honestly, I didn't even know that was possible since this was only the first piece of "Damascus" I ever created and I thought subsequent folding and fire welding was needed to create a pattern. I'll try etching soon. Thanks.