A few things are different with installing macOS Big Sur on the new 24" M1 iMac! I will go over all the things you will need to know + I will show you 3 ways to reinstall macOS Big Sur from the slowest 1. macOS Recovery (1-2 hours) 2. USB Big Sur install disk (30-45min) & Apple Configurator 2. DFU mode and a 2nd Mac with a Big Sur IPSW file (8 Minutes!!!) Let me know if you have any questions.
So I have a 2012 MacBook Pro and I followed your steps on the 3rd way and my MacBook didn’t have dfu pop up, instead it came up with a “connect accessory to a thunderbolt port on this Mac” message
so some guy advised on how to create a external drive - clone cause the internal was only 256GB, so he 1-Formatted his target 1tb ssd external drive as masterboot. 2-cloned his Monterey m1 system with Carbon Copy Cloner 3-rebooted in recovery and re installed Monterey with out erasing the cloned drive. does this sound correct?
I did not do "erase volume group" at 2:45 and just did erase. It did not work at all. I wish I saw this video earlier. Thank you so much for posting this. It is a life saver.
Thank you for your Video! Im still stuck: My iMac M1 is not responding at all to any presses of the power button. It shows up in Configurator on my M1 Macbook Air running the latest Beta and can be set in DFU. If I try to install MacOS (tried diffrent Versions of Monterey and Sonoma dowloaded from your side and the latest Version downloaded in Configurator) the iMac lights up and shows the apple logo. A loading bar appears and starts to fill up. It always crashes at about 3/4 of the bar. Ive tried diffrent cables to. Can somebody help me?
I need to do that on my 2019 iMac with an Intel processor, how can I put the iMac in DFU mode, I try to do the same but when I press the button and leave it for a few seconds the iMac turns off help
Can I try the process on my M1 2021 iMac to see if I can do it - just in case? - I have a MacBook Pro I could use with the iMAC. BUT will it harm my iMAC which is working perfectly.
Wish I saw this earlier! Bricked my M1 iMac and had to send it back... They're sending me a MacBook Pro as I chose it as an alternative... any advice? Some people have said to just make sure it's updated and it should be golden?
Sir I by mistake clicked on mac power button for some time and I appeared with the loading setup options. Like u had shown .now how can I get back from this situation. Please help fast
Hey there! need help, would i be able to do this method to revive my imac Retina 5K, 27-inch, 2017 model? It will not turn on and i think i may need to completely reinstall mac. Please let me know! Thanks
Hi I add a question and need help. I accidentally deleted my "Macintosh HD" file and the "reinstall macOs Monterrey" file can't locate a Macintosh HD file. Also, I can't erase the interal SSD or partition it. Would you be able to tell me how I can install a new Macintosh HD? Hope you can help.
Unfortunately the internet recovery for M1, is lacking. Intel will update to the lastest OS. With M1 you have to install the OS your iMac came with and then update afterwards. Thats annoying, doesn't cost them anything to allow you to install the latest available OS.
Unfortunately the USB method resulted in an error (personalisation error). With Ventura. So waay past Big Sur when this problem occurred. Looks like it's not fixed.
@@Mr.Macintosh It's a long story... Started as a simple driver installation (which turned out I didn't need), and ended up erasing my Mac. I wanted to downgrade one of the installations (had a clean installation of Ventura and an upgrade from Monterey, on two different partitions). So, I initially tried to downgrade one of them (the one I was using for testing, as a clean installation) to Monterey to see if I can reproduce the issue I was having in Ventura. But...here is probably where I messed up. I had the partition name as VenturaBeta or something similar. So I thought: I want to install Monterey on it (from another USB drive), and I want the partition name to reflect that. So far no problem. The problem is that I selected VenturaBeta in the initial prompt (I still don't understand how this new recovery system works, it was a lot easier on Intel Macs), and in Disk Utility, I erased VenturaBeta and renamed to Monterey. Then exit, and started the installation of Monterey, from the stick. Well, that didn't work well either. At some point It finished installing, first part, but after the reboot, there was no "install MacOS" in the boot picker. I did have the Monterey partition I renamed, but it was unbootable. I could select it, it would show a spinning wheel for a little bit, then go back to Continue. Then I think I selected Options from the boot picker, and if I remember correctly, it asked me to select a user to recover. And I kept selecting Monterey, but that wouldn't work. So then I thought: ok, let's erase the Monterey partition and start again. This time with all the names correctly set up from the beginning. And I think I clicked Erase Mac from this section, thinking it would bring me to the Disk Utility page where I can select WHAT I want to delete. Instead, it just deleted everything. So, at this point I thought: ok, let's install Ventura directly, from a USB drive. So I don't have to install Monterey first, then upgrade it (which I ended up doing anyway, cause I couldn't find another way). Made one with createinstallmedia command, all good. It did start the installation, but at some point it just stopped and showed that personalisation error. I tried that resetpassword command in Terminal, but it didn't show any user, like in your other video (the one where you show how to fix personalisation error). It did open that Reset Password window, but there was no user (probably from the Erase Mac thingy I did before). So...in the end, I had to reinstall Monterey (from the internet, which took a long time) and upgrade it to Ventura (which worked fine). Overall, it's not that bad. I was thinking of doing a clean install. But this erased everything, not just the operating system. Anyway, once in Monterey, I did manage to test that what I wanted to test in the first place (creating a PPPoE connection with a Baseus 8-in-1 USB hub). And yeah, looks like I don't need a driver. It was just a Ventura bug. In Ventura, it wouldn't save the password for the connection, and the Connect button was greyed out (inactive). But if you have that already set up from Monterey, it seems to keep it in Ventura, as well. Haven't tested to see if it also works, but...I guess it should. Right now, I'm focusing on bringing back all my apps and stuff. Maybe I'll try again later to see if it was really that, or something else I missed or messed up. The machine is a 2021 16" MacBook Pro with M1 Pro. It should be the same though for other M1 Macs. Anyway, lesson learned: don't do Erase Mac unless you want it to erase Everything! I'm still not sure why it wouldn't let me install Monterey from the stick though. It worked fine from the internet recovery. Probably because of that name change. It wanted to install on VenturaBeta, but then that was erased and renamed, and it tried to install on that... I don't have another explanation... Weird stuff nonetheless.
Thanks for the video,Using the usb installer, I get this message "this copy of macos big sur is too old to be opened on ths verson of mac os" Kindly advise
I did factory reset my M1 MacBook Pro 13 but it’s taking forever to install the MacOS Big Sur .. A friend told me when my Mac goes to sleep mode it stops downloading .. I want to know if it true
This is why I always recommend using an installer USB. All the files are on the USB and you will not have to worry about the download. The Mac should not go to sleep during an OS install unless you close the lid.
My new iMac wouldn't let me login when it woke, force turned it off, then it went into MacOS recovery after it turned on. don't know why, made me a little worried.. any ideas why?
Hi! Pls help. When I click on "restore" I get the message: "Configurator could not perform the requested action because the device is not booted." Does it mean that I should boot the (damaged) Mac? If I click "restore" once again it says: "A parameter was invalid" Can you help pls? THANX A LOT in advance!
@@Mr.Macintosh actually, I'm using a Macbook Pro, early 2013 for restoring, and since Apple Configurator 2 was not supported, I found online an older, beta version, so this was the issue (for other who might read this). Just FYI - I'm trying today to restore with a newer Mac, Big Sure - but it still asks for the newest version of Big Sur. So this info might be useful for some folks out there. THANX for the prompt reply anyways man, your videos and website are very useful!
So I need help. After I dragged the ipsw file to my macbook, it says that “the system can’t be restored on this device” and it gives [com.apple.MobileDevice.MobileRestore - 0xBC6 (3014)] What should I do? The computer i’m trying to restore is M1 iMac which is why i tried the 11.3 and 11.6 which both gave me the same error message.
Be sure to use the mac cable as apple says that thunderbolt is not supported. Also are you letting AC2 download the IPSW or are you manually downloading the file from my site?
A few things are different with installing macOS Big Sur on the new 24" M1 iMac! I will go over all the things you will need to know + I will show you 3 ways to reinstall macOS Big Sur from the slowest 1. macOS Recovery (1-2 hours) 2. USB Big Sur install disk (30-45min) & Apple Configurator 2. DFU mode and a 2nd Mac with a Big Sur IPSW file (8 Minutes!!!) Let me know if you have any questions.
So I have a 2012 MacBook Pro and I followed your steps on the 3rd way and my MacBook didn’t have dfu pop up, instead it came up with a “connect accessory to a thunderbolt port on this Mac” message
don't forget the hours it takes to download the 13gb .IPSW
there faster method ,, clone existing image from external hard drive
so some guy advised on how to create a external drive - clone cause the internal was only 256GB, so he
1-Formatted his target 1tb ssd external drive as masterboot.
2-cloned his Monterey m1 system with Carbon Copy Cloner
3-rebooted in recovery and re installed Monterey with out erasing the cloned drive.
does this sound correct?
To me, Apple Silicon dfu only pass with Apple Silicon on the machine with Configurator 2
I did not do "erase volume group" at 2:45 and just did erase. It did not work at all. I wish I saw this video earlier. Thank you so much for posting this. It is a life saver.
I get this too, and then get the prompt to erase Mac and restart
14:36 this method is gold!!!! Thank you very much!!!❤
this channel is pure gold thank you soooo much
Thank you so much!
Always amazing videos. I used your video to install BigSur on my unsupported MBP. Thank you.
Awesome Fabio!!! I'm glad that your Unsupported Mac is still going strong with Big Sur!
Added this excellent article to my collection. Love your work. Stay safe
Much appreciated John thank you!
I always turn my volume up when the video starts 😂.
Hey Ben!!! I need some of that sweet intro music that you use!!! 👍
Super informative video Mr. Macintosh, thank you. I have it book marked just in case I ever need to follow it again
thanks for making this video! very nice to have to refer back to! great video!
Glad you enjoyed it @twoodcc!!!
100 times better than apple ccc guide provided
Thank you very much @Tobias Nilson! 👍
Thank you for your Video!
Im still stuck: My iMac M1 is not responding at all to any presses of the power button. It shows up in Configurator on my M1 Macbook Air running the latest Beta and can be set in DFU. If I try to install MacOS (tried diffrent Versions of Monterey and Sonoma dowloaded from your side and the latest Version downloaded in Configurator) the iMac lights up and shows the apple logo. A loading bar appears and starts to fill up. It always crashes at about 3/4 of the bar. Ive tried diffrent cables to. Can somebody help me?
Thank you for your help, great stuff
you save my life.......very very thannnnk~~~😂😊
I need to do that on my 2019 iMac with an Intel processor, how can I put the iMac in DFU mode, I try to do the same but when I press the button and leave it for a few seconds the iMac turns off help
Great Video.
Thank you Sir, great video and information!
Glad it was helpful!
Can I try the process on my M1 2021 iMac to see if I can do it - just in case? - I have a MacBook Pro I could use with the iMAC. BUT will it harm my iMAC which is working perfectly.
Wish I saw this earlier! Bricked my M1 iMac and had to send it back... They're sending me a MacBook Pro as I chose it as an alternative... any advice? Some people have said to just make sure it's updated and it should be golden?
Dear Mr. Macintosh, How to use iPad pro as a main display for mac min m1? Thank you.
Thanks.
Sir I by mistake clicked on mac power button for some time and I appeared with the loading setup options. Like u had shown .now how can I get back from this situation.
Please help fast
Hey there! need help, would i be able to do this method to revive my imac Retina 5K, 27-inch, 2017 model? It will not turn on and i think i may need to completely reinstall mac. Please let me know! Thanks
Yeah I bricked it. Bootloops and unable to enter recovery. please help
If I do that, is the icloud lock gone ???
No.
I’d rather take a three host then do all that
Hi I add a question and need help.
I accidentally deleted my "Macintosh HD" file and the "reinstall macOs Monterrey" file can't locate a Macintosh HD file. Also, I can't erase the interal SSD or partition it. Would you be able to tell me how I can install a new Macintosh HD? Hope you can help.
nice
Unfortunately the internet recovery for M1, is lacking.
Intel will update to the lastest OS. With M1 you have to install the OS your iMac came with and then update afterwards.
Thats annoying, doesn't cost them anything to allow you to install the latest available OS.
Unfortunately the USB method resulted in an error (personalisation error). With Ventura. So waay past Big Sur when this problem occurred. Looks like it's not fixed.
Radu, can you please walk through what you did? Maybe I can reproduce it.
@@Mr.Macintosh It's a long story... Started as a simple driver installation (which turned out I didn't need), and ended up erasing my Mac.
I wanted to downgrade one of the installations (had a clean installation of Ventura and an upgrade from Monterey, on two different partitions).
So, I initially tried to downgrade one of them (the one I was using for testing, as a clean installation) to Monterey to see if I can reproduce the issue I was having in Ventura.
But...here is probably where I messed up.
I had the partition name as VenturaBeta or something similar. So I thought: I want to install Monterey on it (from another USB drive), and I want the partition name to reflect that. So far no problem. The problem is that I selected VenturaBeta in the initial prompt (I still don't understand how this new recovery system works, it was a lot easier on Intel Macs), and in Disk Utility, I erased VenturaBeta and renamed to Monterey. Then exit, and started the installation of Monterey, from the stick.
Well, that didn't work well either. At some point It finished installing, first part, but after the reboot, there was no "install MacOS" in the boot picker. I did have the Monterey partition I renamed, but it was unbootable. I could select it, it would show a spinning wheel for a little bit, then go back to Continue.
Then I think I selected Options from the boot picker, and if I remember correctly, it asked me to select a user to recover. And I kept selecting Monterey, but that wouldn't work. So then I thought: ok, let's erase the Monterey partition and start again. This time with all the names correctly set up from the beginning.
And I think I clicked Erase Mac from this section, thinking it would bring me to the Disk Utility page where I can select WHAT I want to delete. Instead, it just deleted everything.
So, at this point I thought: ok, let's install Ventura directly, from a USB drive. So I don't have to install Monterey first, then upgrade it (which I ended up doing anyway, cause I couldn't find another way).
Made one with createinstallmedia command, all good. It did start the installation, but at some point it just stopped and showed that personalisation error.
I tried that resetpassword command in Terminal, but it didn't show any user, like in your other video (the one where you show how to fix personalisation error). It did open that Reset Password window, but there was no user (probably from the Erase Mac thingy I did before).
So...in the end, I had to reinstall Monterey (from the internet, which took a long time) and upgrade it to Ventura (which worked fine). Overall, it's not that bad. I was thinking of doing a clean install. But this erased everything, not just the operating system.
Anyway, once in Monterey, I did manage to test that what I wanted to test in the first place (creating a PPPoE connection with a Baseus 8-in-1 USB hub). And yeah, looks like I don't need a driver. It was just a Ventura bug. In Ventura, it wouldn't save the password for the connection, and the Connect button was greyed out (inactive). But if you have that already set up from Monterey, it seems to keep it in Ventura, as well. Haven't tested to see if it also works, but...I guess it should. Right now, I'm focusing on bringing back all my apps and stuff. Maybe I'll try again later to see if it was really that, or something else I missed or messed up.
The machine is a 2021 16" MacBook Pro with M1 Pro. It should be the same though for other M1 Macs.
Anyway, lesson learned: don't do Erase Mac unless you want it to erase Everything! I'm still not sure why it wouldn't let me install Monterey from the stick though. It worked fine from the internet recovery. Probably because of that name change. It wanted to install on VenturaBeta, but then that was erased and renamed, and it tried to install on that... I don't have another explanation... Weird stuff nonetheless.
I dont know why apple lakes it so hard to switch to different macOs versions...
Can you try to boot a M1 Mac to Windows 10 ARM using a USB stick? I haven't seen that anywhere yet.
Great question, but the M1 does not have native boot support for windows arm yet. For now we will have to use it through applications like Parallels.
Thanks for the video,Using the usb installer, I get this message "this copy of macos big sur is too old to be opened on ths verson of mac os" Kindly advise
Hello Thomson, make sure that you are using a usb drive with 11.2.3 on it. Once booted you should not get the message.
I did factory reset my M1 MacBook Pro 13 but it’s taking forever to install the MacOS Big Sur .. A friend told me when my Mac goes to sleep mode it stops downloading .. I want to know if it true
This is why I always recommend using an installer USB. All the files are on the USB and you will not have to worry about the download. The Mac should not go to sleep during an OS install unless you close the lid.
My new iMac wouldn't let me login when it woke, force turned it off, then it went into MacOS recovery after it turned on. don't know why, made me a little worried.. any ideas why?
Hi! Pls help.
When I click on "restore" I get the message:
"Configurator could not perform the requested action because the device is not booted."
Does it mean that I should boot the (damaged) Mac?
If I click "restore" once again it says:
"A parameter was invalid"
Can you help pls? THANX A LOT in advance!
Hello, what year and model are you trying trying to restore?
@@Mr.Macintosh actually, I'm using a Macbook Pro, early 2013 for restoring, and since Apple Configurator 2 was not supported, I found online an older, beta version, so this was the issue (for other who might read this). Just FYI - I'm trying today to restore with a newer Mac, Big Sure - but it still asks for the newest version of Big Sur. So this info might be useful for some folks out there. THANX for the prompt reply anyways man, your videos and website are very useful!
say usb cord but replace the d with an n🤣
So I need help. After I dragged the ipsw file to my macbook, it says that “the system can’t be restored on this device” and it gives [com.apple.MobileDevice.MobileRestore - 0xBC6 (3014)]
What should I do? The computer i’m trying to restore is M1 iMac which is why i tried the 11.3 and 11.6 which both gave me the same error message.
Did AC2 say DFU in the main box or does it show a lock? Are you using the USB-C white charge cable?
@@Mr.Macintosh says DFU. Everything is perfect except that error message. And actually i’m not using the apple cable, but it supports thunderbolt.
@@Mr.Macintosh i tried the mac cable and it still shows the same error code
Be sure to use the mac cable as apple says that thunderbolt is not supported. Also are you letting AC2 download the IPSW or are you manually downloading the file from my site?
please i need to contact with u , i stocks and i did many things wrong . now i can use it
i need to send u some pics , please