MINI-STRIKER® Lightweight Pump Demo Video
HTML-код
- Опубликовано: 29 авг 2024
- The MINI-STRIKER® is a lightweight high-pressure centrifugal pump powered by a reliable Honda GHX50 4-stroke engine.
The MINI-STRIKER® weights less than 20 Lbs and despite its small size it produces an impressive maximum head pressure of 196’.
Before operating the pump fill the fuel tank with recommended gasoline and check the oil level.
Place the pump close to a water source; insure that it is on level ground.
Connect the suction hose to the pump intake and securely tighten it using a hose wrench.
Place the other end of the suction hose with the foot valve strainer in the water source; insure there’s a minimum of 8” of water above the foot valve to avoid drawing in air. Beware of drafting sediments or other debris.
Quickly prime the pump using a hand primer to draft in water into the pump.
Alternatively you can prime the pump by giving the suction hose several back and forth strokes keeping the foot valve fully submerged.
With the pump fully primed, securely connect the discharge hose and connect the nozzle at the other end.
To start the pump,
• Turn the ignition switch ON
• Open fuel valve
• Engage the choke, if engine is cold
• Give starter rope a quick and steady pull until engine starts
• Disengage choke and allow the engine to properly warm up before using full throttle
With the nozzle in hand, you are now ready to flow water!
My mates Oldman designed the pump housing and assembly here in NZ for purposes of gold recovery. Lots of pressure.
that's pretty cool! Would love to see pictures or videos of that
@@WATERAX I can get the first drafts more than likely...
Helpful hint...next time try not to place suction hose where the water is cascading / aerating in order to reduce issues with priming and cavitation when operating...cheers, Bob
Lol. 2 feet away would have put the suction in calmer water. Also, the vital procedure of what switches get moved where and in what order is done too quickly, not discussed, and is shot from too far a distance with an angle where you can't clearly see anything. Besides the music being quite annoying, it really is not a great instructional video for an item that costs so much and can be damaged quite easily by improper operation.
What is the inside pump made of ?What psi this can create ? Where is link to buy one ?
Hi, the MINI-STRIKER® fire pump is manufactured using anodized corrosive resistant aluminum and has a maximum pressure of 85 PSI (5.9 bar).
The following link will take you to the MINI-STRIKER® on our eshop where you can also find all the water handling accessories to go with it: shop.waterax.com/index.php/portable-fire-pumps/mini-strikerr-series/mini-strikerr-mstr-p-pump-1-stg-gxh50-portable.html
Great pump though as use them operationally all the time.
n
instablaster
Berapa harga satu set pompa air ini?
Where can I order that primer pump and the water pump
Hi Jay! You can order the pump and accessories online >> shop.waterax.com/index.php/portable-fire-pumps/mini-strikerr-series.html and if you have any questions don't hesitate to contact us via info@waterax.com
Good
How can I get a used one? No way I can afford a new one right now. What kind of connections are on the suction and discharge have?
You are telling me this pump can pumo out water 60 meters in a deep well?
Wanna to get it, but where is it?
Hi Estelo,
You can contact us via our website: www.waterax.com/en/contact/get-in-touch
Or you can also find your nearest dealer.
Let us know if you need additional help.
Best,
WATERAX Team
Mohon info nya dimana kita bisa membeli peralatan ini
What's the maximum amount of feet this can pump water on flat land
Using 1.5" hose, the MINI-STRIKER® will provide workable pressure after 700ft. Keep in mind that this will change depending on factors like the pump site elevation, hose diameter, etc.
@@WATERAX 👍
Is this a music video?
इसकी किमत कितनी है
👍☺️
Sa sa