Tested: CSF Intercooler for 992 Carrera
HTML-код
- Опубликовано: 14 авг 2023
- We test the CSF Intercooler for the Porsche 911 Carrera. This fits all Carreras including the base, T, S and GTS. We observed some noticeable reduction to IATs. On the dyno, power only increased 0.5whp but to be expected without changing tuning.
*CSF Radiators - High-Performance Intercooler System (992 Carrera)*
flat6motorsports.com/products... 
Авто/Мото
Now we are getting into the good stuff.. I really like this engine and think it could live happy close to 600 hp on 91
Turbos will be next!
Great video 👍
Short pulls won’t really verify improved heat transfer as the difference in the specific heat capacity (thermal mass) could be the reason for differing IATs. A tracks test is really required to determine how much better this intercooler performs.
I'm using a interchiller that uses my AC system to chill a tank of fluid and that runs in a closed system that has no access to outside air. I usually see 30 degrees lower than outside temps, but it's for a LSA supercharger. Would be awesome if someone made the brick for a water to air cooler system. I show90 degrees when it's 102 outside after I have sent 14psi through the LSA.
What wheels and fitment is on the car in this video??? It looks perfect! Also is the fitment the same on a 991.2?
These are BC Forged RZ05 wheels, the offsets are pretty much customizable, built to order/spec. Feel free to reach out to us at info@flat6motorsports.com for more info
About how long to install the intercooler and 1-5 wrench rating please for a shade tree mechanic? 😂
It takes roughly 3-4 hours. You will need to remove the rear bumper, lights, wing assembly and then it's all right there. Shaving the OEM practice shrouds takes a little bit of time. Nothing complicated, just some time consuming tasks around the install. The unit drops in and fits like a glove, very well made part.
@@Flat6Motorsports thought the shaving was only 991 variants and that the 992 was direct drop in?
@@TheSgt93 you just have to trim down the lower shrouds (exit side).