I can say I like the look of the wood grips, classic style. I did change to the plastic ones just for the ease of shooting. Had the gun over 3 years now, not one issue
I started as a deputy in 1981 retired in 2017. For the first 8 years I carried revolver had many different ones. I still have several some over a 100 years old. Although I dont carry them anymore I still like them revolvers
@@ToolsandTargets yeah little different in combat than autos. They use to make us stop in qualification if you didnt keep count. Do it twice and you had to come back. Trying to teach you only had six shots. You oughta try being in pursuit shoot six at a vehicle moving about 90 and reloading a revolver at speed. A trip for sure.I like them still good for those that dont get along with autos. Double action is a little different getting use to. I wish I had all of them back that I traded but you know how that goes. Have fun with it
In late 2016, shortly after moving from Missouri to Indiana I bought a D.A.O. version. I kept the wooden grips on it, because of the cool factor, till today. I switched to the plastic grips just to test them out. I'm not sure which ones I'll keep on it though. I love this gun! And as good as the gun itself is, their customer service department is even better! That's saying something, This gun is flat out awesome!
I’m with you Larry. I’ve got over 1/2 dozen rock island pistols and they are awesome. I’ve never had a problem with them. I picked up a 22 TCM and I hear is kicks butt against the 5.7x28 Ballistics. I don’t have an RIA revolver yet.
@@upholdthesecond92 5.7x28 is better than .22 TCM unless you only count the super pud loaded 5.7x28 ammo. I have a conversion barrel for .22 TCM & a 5.7x28 handgun & I'm getting quite a bit more energy out of the 5.7x28 & way better wound tracks in gel. The .22 TCM is still a decent round, though. My best .22 TCM numbers are 40 grains @ 1975 FPS. My best 5.7x28 numbers are 34 grains @ 2315 FPS. Both of those still compare very well to the common service calibers. You can get up to about 380 ft/lbs from the .22 TCM & up to about 410 ft/lbs from the 5.7x28. (This is from a handgun not a Carbine) My main problem with 5.7x28 is how weak the common Federal rounds are loaded. You can pull the bullets & safley work up the load almost 400 FPS over the factory loading. No excuse for loading them that light from the factory.
I have one, it runs perfectly. I polished the cylinders, and like you painted the sight. I run the plastic grips, which I textured along the back heel. It’s the least expensive pistol I own, but I shoot it a lot because it’s a lot of fun.
Good review. I have been keeping a watch on those 38 revolvers, and the RIA 12 gauge pump action shotgun that RK has been selling. For the most part, I have been hearing good things.
Your lookin at the right one. I’ve put a ton of rounds through mine, first one I bought my brother fell in love with so I bought another one. I’ve bought a Maverick 88 I haven’t been able to make fail and a Taurus g2c back when they had those rebates. These are the best 3 values I’ve found in firearms, this one being my favorite. It weights 24 oz. which make it shoot really smooth. Little orange paint on that front blade, and you’ll love this little gun. I’ve got an untold fortune in handguns, this inexpensive revolver fills a niche for concealed carry, it just does.
I have two of the M200 revolvers, and I put those stubby, little M206 grips on them for better concealed carry. I have large hands too, but the little grips aren't any problem for me. Those Rock Island revolvers are a super value for the money.
I love my RIA M206, I have mine for more than 3 years now. I spotted it when I was travelling in the Philippines. I went to the range almost every weekend with it. I have more than a thousand rounds fired in it already. I know this little pistol will go toe to toe with bad guys in Chicago. Yes, I loaded it with +P ammo at the time.
Back when I still worked for Academy Sports, I picked up the M200. Retailed for (at the time) $219.99. My employee discount, plus Academy credit card discount brought it down to $167.20...but after tax $184.08. Best (sub) $200 I've ever spent on a gun. Huge bang for your buck, especially if your'e a little cash-strapped and you need something to protect your home, yourself, or loved one. My only nitpick complaint is that I wish the grips were a little thinner so I actually utilize the speed loader I have (HKS DS) as well as the factory sights leaving a bit to be desired. Edit: Just remembered I have a Kel-Tec P17 that at the time, retailed for $199.99 and I used the same two discounts to get it down to $167.34 (after tax). Pro Tip: if you shop Academy, sign up for the card and just pay the balance while at the register. They'll let you do it as long as it's cash, check, or debit card (can't use another credit card) and you'll get an easy 5% off everything and not even worry about the interest. It's also stackable with employee discount, teacher, first responder, military, and healthcare worker discount (10% off when active).
( the grips were a little thinner ). You need to cut the grip left size little bit, and not try to insert the whole speed loader in, all you need is insert the tip of ammo will be OK.
I remember the old Colt Detective - .357 Magnum, it’s a collectable now and I always wished I had one. It always had the right kind of frontal weight to it because of the short bull barrel.
I have XLG hands too & have been carrying/shooting a J Frame S&W since 1968. I’ll either replace the grip or add a Tyler Grip Adapter to aid w/that smallish wood grip that comes on most of these guns.
I think it's a cool little pistol. It's interesting that Rock Island went with more of a Colt's style action with the cylinder release and cylinder rotation. It seems most companies copy the S&W style. I like how this looks with the wood grips. With that skinny grip and the Colt's style cylinder stop, it looks a lot like an old Detective's Special. If it was mine, I'd take some Scotchbrite to the finish and make it look like an antique gun with the finish worn from use.
The finish on these seems to have improved a great deal in the last 5 years! The early ones back in '17....man a lot of machine marks. this looks much smoother.
@@ToolsandTargets looking to get one for the wife. I have an option of "building" one of the barreless model 10's like JG has for 2 c notes PLUS finding a 2" barrel...or one of these and done. she likes my model 10 after my trigger spring job but with a 4" barrel, its a bit much for a purse.
My first gun was .22lr because I wanted something cheap to train grip and to practice cleaning. After a couple hundred rounds down a 6inch Ruger Wrangler, now I'm so ready for this detective revolver. I feel like I can take this on the hot trails to have my back from wild javalinas or coyotes.
.38 special is my FAVORITE gun to shoot - not sure why, it just feels right and hits where I want it to almost as if it was an extension of my own body.
That’s exactly how I felt with a Ruger SR9C. I went to buy one this weekend only to find out they’ve been discontinued! 🙄 I shot a S&W model 10 several times and liked it, but the sights were horrible
I have owned a Rock Island M206 for a year and I have hand no issues except the wooden handles, I replaced them with larger plastic grips and grip tape and it is an excellent concealed carry.
Those trigger pull weights were coming in nice an consistent. I'd like to see what it looks like after a few thousand rounds and some carry time. Looks like a good fair priced little carry rig.
Thank you for the awesome review and keep up the good work I love your channel. I just placed an order for one of these got it for $229.00 and Sportsman Warehouse had a 20 buck rebate so it was $230.00 out the door. Now just waiting for it to arrive.
I like that one. I should have got one a couple of years ago. They are going for around $300 now. That hammer spur is huge. I might would get the spurless and definitely go with the plastic grips. I saw a review HO did on it and he like it as well.
I picked up my Model 200-(the 4" barrel version) new, at my local Academy around a year ago. It was marked $249. But it was the display model and I talked them down to $159.
It came down to this and a used model 85 I went back today the rock island was gone. It sucks that she was gone but the model 85 came home with me because to find a 38 for under 300 theses days is hard to beat
I might have to pick one up myself but its 300 bucks at my nearby FFL. They are charging a arm and a leg for the ammo. FYI the one I want has a 4 inch barrel btw. Great vid man.
Gun looks perfect with those wood grips on it. Looking for a new revolver myself but in .45. One day I’ll find one that catches my eye. Keep up the great videos.
love the looks of mine with those wood grips the problem was grabbing it quickly and getting on target had to put the black grips on mine very comfortable to carry and i seem to grab for it and leave my more expensive ones in the safe. I tell everyone to buy one as a back up if nothing else inexpensive and accurate. Win Win
I got the 4 inch barrel version with rubber grips. Awesome pistol for about$200. Ive punished it pretty hard and its holding up well. My only issue is that my friendgirl likes it so much shes trying to claim it
I took a shot every time he said “little” and now I’m dead. But yea, as long as you don’t get a lemon, for the price you can’t beat these little pistols.
RIA does have excellent customer service. My new Model 200 had a timing issue right out of the box. They paid shipping both ways and covered the repair. I had the revolver back in 2 weeks. It's repaired and now feels like it has a custom action job.
Nice! I would have bought that VR80 myself if I hadn't already gotten the JTS I picked up a few weeks ago. So far, Rock Island stuff seems 100% solid.😎
@@j_chill1290 what did you use for your break in? Someone suggested for us to try 3inch shells with 1550 velocity. The videos I've seen mostly are using 2 3/4" 1350 velocity.
@@ToolsandTargets Rock Island makes some pretty impressive stuff for the price point. Their claim to fame is to make quality product at the working man's price. Definitely can appreciate that in today's market.
@Gorxon Andrews Very smooth all the way to the break and very little stacking at all that I noticed. Usually if I aint complaining about it non-stop in the video, it wasn't bad. LOL... Did I mention it was little?😂
Looking at this for my mom- she's 65 and has had carpal tunnel (and the surgery for it). She currently has the little Glock .380 and has trouble racking the slide so she want's something easier overall. She shot my Taurus 65 today with .38's in it and she said it was easier to shoot, just too heavy. I told her one made just for .38 would be smaller and lighter, lol. This looks like the best option for her hands, and budget.
@@ToolsandTargets Still almost a pound lighter than the 65 with the 4" barrel so I think she'll do ok. She handled my dad's 605 after and thought it was more comfy. And since the weight soaks a little recoil (she liked that part on mine) it might be just right for her.
Yeah, there's no doubt those plastic ones would be a lot easier to hold on to for me. I had to tuck my thumb down to keep it off the cylinder of this little sucker.😂
Not only do I own RIA revolvers, I also own some old PARKERIZED 1911s from RIA. STANDARD WW2 TYPE SIGHTS FOR A DISABLED SENIOR THAT ARE EASY TO RACK ONE IN 5 INCH AND 3.5 INCH BARREL. REST ARE REVOLVERS. ROCK ISLANDS ALONG WITH A 4 INCH SMITH M64 AND 2 TAURUSES 856 ONE IN 2 INCH STAINLESS STEEL AND 3 INCH 856. GOES WIT MY 4 INCH 64. IF YOU PICK A REVOLVER FOR HOME OR CCW, YOU MADE A GREAT CHOICE. YOU GOT THE RIGHT AMMO AND TEACHINGS ON REVOLVERS AND DON'T LET THE FORUM COMMANDOS SAY TO YOU ANY DIFFERENT. PERIOD.
“No,” Unequivocally, unambiguously and plainly, yes. “I did Gunsmithing and Firearms Instruction my entire career. I've been a S&W Armorer for over 30 years. I have also worked on these RIA Revolvers for the last few years.” This is called a non sequitur, or colloquially known as a logical fallacy. “I know EXACTLY what I'm talking about.” Regarding you being a smith, I have no reason to doubt you. Regarding the laws of logic and committing logical fallacy, you are drowning in an ocean of them. “My "Critical Thinking Skill Set" arrived at the Firearm, it's inner workings and durability.” And this is the heart of the matter. My original post had nothing to do with *THEE QUALITIES* of *THEE GUNS,* but only *THEE PRICES* and *THEE BOXES* received. “But.....Duh, it's a really cool box so it must be a really nice gun.” Again you double down on poor logic when you've been corrected… Why ? Because you infer I commit the fallacy known as a category error (gun=box and box=gun), which I never committed. And two, you commit the logical fallacy known as a strawman. (Ignoring what I said and building up fake argument that I never made, in order to easily attack it) *Good grief...* are you trolling me ? *lol...* *Preemptive response :* If you must continue therein with demonstrating the clear fact that you are no logician, have at it. But I suggest studying logic so you become more effective in argumentation, because you have failed here miserably. Best Regards
I've been eye balling these little revolvers at dunhams sometimes they have them on sale for 209.99 and I have seen them for 199.99 but not has often. I'd like to get a Taurus 856 in 38special or the Taurus tracker in 357mag in stainless. Hopefully I'll get one this summer if somewhere gets any in. Would really like a s&w 686 or something of that kind but I can buy two Taurus revolvers for one s&w.
This little gun really surprised me bigtime with how accurate I was able to shoot it. My Rural King has some S&W airweight models but I really don't like how light those guns are so I never have gotten one. I've been looking at the m200 model Rock Island also. I think that's gonna be my next .38 revolver.
Yep got one last night but with big hands I had to put the plastic grips on it but it feels nice in my hands and the weights not bad at all and going to take it out to the range today brother and fire a few cylinders. 😊
I'm interested in this revolver but I'm conflicted because of the negative reviews I've seen. Any malfunctions shooting it? I like it because it looks like the Colt Detective Special. I don't expect it to be a Colt for $225 but I'm looking for a decent snub nose for concealed carry.
Really impressed to see the trigger pull in DA. Out of the box most Smiths and Rugers are over 10 pounds. More and more I'm wanting one of these little buggers.
I liked your video. I had just bought one 4 weeks ago, but havent had a chance to shoot it yet. Wow, the accuracy. I hope mine shoots that good. I did opt to purchase a set of Colt Detective Pachmayr grips. They are softer than the plastic ones that come with it. Its much more comfortable with those. I like the parkerized finish also. It gives it that military look.
Thank you sir. I actually have been looking at those grips myself. I really like the look with the wood ones but I don't like having to modify my hold to get a good grip on them. I think it's a great little shooter.😎
@@ToolsandTargets the wood grips look cool, like the old detective and probably ok for CC but for what you were doing I bet you could do even better with these larger soft grips.
I have shot it now. It shoots great. I used the new grips. Much easier to hold. I didnt go for any accuracy. I was just getting used to the gun. Great little gun and the grips are really nice to hold much more comfortable to shoot. I guess the wood grips or ok for CC.
I have the 4 inch with the black plastic grips on it. Good shooter but those grips do kinda bite just by the webbing and knuckle on your thumb. I got a set of those wood grips to see if they felt better. They didn't. Made it look kinda silly too. Looked like a Mauser broomhandle revolver! Good video, thanks.
Thank you sir. I'm considering picking up that 4" model also just to have in the collection. I wonder if Hogue makes grips for it. They're always nice for what I've put em on.
Nice snubby, good test! I have an ammo test suggestion: Winchester USA Ready Defense Grade. I just fired a box of their 124 gr 9mm +P through a couple of Glocks and it shot great.
I have the Rock Island Model 206. When I shoot it double action with regular .38 loads it locks up after the 4th to 5th round. Locks up means I can't pull the trigger or pull back the hammer to shoot it again. To fix this malfunction I have to release the cylinder and close it again. I talked to a local gun shop about this and they do not sell the Model 206 anymore because of this problem. I sent in a Rock Island M5 shotgun for repair because it fell apart after shooting 10 rounds and had other issues. It came back unrepaired. And I did not get my orange plastic part to show that the chamber was clear. I contacted them asking for it and never heard back. So I'm not going to waste my time sending this Model 206 38 for repair. Oh and the trigger pull is so clunky.
Yeah, the wood grips look cool, but for actual shooting, I prefer the larger, molded grips. I have a Rossi, 5 shot, snubby with rubber grips that shoots extremely well. I noticed the Colt-style cylinder release (of which I'm not a big fan). I'm not, however, planning on parting with my 6" Python because of that minor detail!!🤣🤣
How's the lock up on the 206, is there alot of play in the cylinder? I'm considering one but not sure if I want the Rock Island or a Taurus. I want a cheap beater snubby but I'm on the fence. I'm leaning towards the 605 since it would let me use 357 too but then again the 605 is tiny for a 357. It probably wouldn't see a whole lot of 357 anyway and the 206 would give me an extra round. I know there's also the 856 but my ffl has the Rock Island and the 605 for around the same price. They're charging more for the 856 so if I'm going with a 38 might as well be the Rock. It's for beater use anyway
That M 206 Is Legit I Mean Very Legit ❗️ It shoots Better Than Alot Of Other Revolvers I've been shooting guns for years and I'm impressed with it I've had zero issues with mines❗️
I get what your saying about the grips but, I also think the big plastic grips and the flat finish it has gives it an apocalyptic/zombie horror game kinda look. I’ve shot a few hundred rounds through mine went bang every time for me 🤷♂️ I do remember it came pretty oily from the factory
Crazy isn't it? With mine I shot it better with double action as well. The hammer stages well and breaks as a surprise every time. I really liked that little gun as a cheapie. I shot some 148 Grain hot loaded DEWC's in it. They shot the best.
I will say though, I bought it for the novelty and because I wanted a demonstration pice for teaching basic pistol and PTC courses. Now it’s proven to be a back-up or easy carry for running trails, but now I’m intrigued and am going to pull it apart and polish everything. See how much better I can make this thing. Give it some good grips and make it a good fighting snubby
Did you ever try the plastic grips? You seemed to do alright with the smaller wood grips once you got a good handle on it. I'm about to pull the trigger and pick me one of these up. I don't have a 38 special, but I have ammo....lmao!
No, I haven't tried em at all yet. We did some shooting with it out at my range this weekend. and everybody shoots this thing super good even with these little wood grips. This is a heck of a little gun for what it costs.😎
Finally got it and had a chance to shoot it, so I had ordered it online so when it comes I had to all the Washington State background check wonderful stuff.. (not). But I have to agree with you brother that little thing shoots really good. I ordered some Pachmayr 2515 Compact Grips, Colt D Frame Post 71 grips off of amazon. This little thing shoots great. thank you again I bought it because my dad used to have the colt defender and your review and of course the price this is really close to the colt but it will not be replacing my hellcat or my iwi Masada ... heck not even my Taurus G3C. But it is a cool little gun. I think you should do a review on the IWI Masada it is a really cool gun also .. I love mines. Thank you you again and keep putting out the wonderful content.
@@ToolsandTargets I found a box this past weekend was 19.97 for 20 rounds of winchester silvertip and the box before that was 32.99 for 50 rounds of pmc
I have some questions about this revolver. Can it handle plus p ammo? And how's it holding up a year later? Would you say that this revolver is as good as the Taurus equivalent? I'm looking at one of the RIA's and a Taurus equivalent at one of the local pawnshops and I've been sort of looking at revolvers for my personal carry but money is a little bit tight right now. I figured that I would buy budget friendly now and later when my financial situation gets better I'll step up to something a bit nicer like a Smith and Wesson or a Ruger. My current carry is really a bit awkward for cc so I'm either looking at revolvers or a pocket 380. Something more concealable without the pain anyway...
It can handle +P ammo and has held up perfectly. As far as comparing it to the taurus ones, I would say the taurus has a slight edge on fit and finish but as far as function, they're pretty much identical.👍
Listening to you I immediately was drawn to your voice. It took me a while but I finally placed your voice with an old cartoon show I watched in the 1960s called ' The Hunter'. I had not thought of that cartoon in all these decades until hearing your voice. You sir, are ' The Hunter'. Watch an episode here on RUclips.
I think I’m going to get one of these for a girl I know. Do you think a hollow point will open up at the slow speed? I’ve already watched one we’re you tested ammo Inc and another one neither doing well.Thanks!
I can say I like the look of the wood grips, classic style. I did change to the plastic ones just for the ease of shooting. Had the gun over 3 years now, not one issue
Nice. I think these are very underrated little revolvers.👍
@@ToolsandTargets I'm convinced.
I have heard that Colt D frame grips fit. A pair of Eagle Secret Service Grips would be the cat's meow.
Browne gun works makes nice grips
I started as a deputy in 1981 retired in 2017. For the first 8 years I carried revolver had many different ones. I still have several some over a 100 years old. Although I dont carry them anymore I still like them revolvers
Nice! My grandad was a city police officer his entire life and carried a ton of revolvers too. Revolvers are a whole different kind of cool.😎
@@ToolsandTargets yeah little different in combat than autos. They use to make us stop in qualification if you didnt keep count. Do it twice and you had to come back. Trying to teach you only had six shots. You oughta try being in pursuit shoot six at a vehicle moving about 90 and reloading a revolver at speed. A trip for sure.I like them still good for those that dont get along with autos. Double action is a little different getting use to. I wish I had all of them back that I traded but you know how that goes. Have fun with it
In late 2016, shortly after moving from Missouri to Indiana I bought a D.A.O. version. I kept the wooden grips on it, because of the cool factor, till today. I switched to the plastic grips just to test them out. I'm not sure which ones I'll keep on it though. I love this gun! And as good as the gun itself is, their customer service department is even better! That's saying something, This gun is flat out awesome!
Nice. I agree, this is an awesome little gun for sure.😎
Roger that ! RIA has great customer service.
I'm a huge fan of Rock Island Armory they make some nice looking, quality products. Nice shooting T&T.
I agree. This is my second one and I'm impressed so far.😎
I’m with you Larry. I’ve got over 1/2 dozen rock island pistols and they are awesome. I’ve never had a problem with them. I picked up a 22 TCM and I hear is kicks butt against the 5.7x28 Ballistics.
I don’t have an RIA revolver yet.
@@upholdthesecond92
5.7x28 is better than .22 TCM unless you only count the super pud loaded 5.7x28 ammo.
I have a conversion barrel for .22 TCM & a 5.7x28 handgun & I'm getting quite a bit more energy out of the 5.7x28 & way better wound tracks in gel.
The .22 TCM is still a decent round, though.
My best .22 TCM numbers are 40 grains @ 1975 FPS.
My best 5.7x28 numbers are 34 grains @ 2315 FPS.
Both of those still compare very well to the common service calibers.
You can get up to about 380 ft/lbs from the .22 TCM & up to about 410 ft/lbs from the 5.7x28.
(This is from a handgun not a Carbine)
My main problem with 5.7x28 is how weak the common Federal rounds are loaded.
You can pull the bullets & safley work up the load almost 400 FPS over the factory loading.
No excuse for loading them that light from the factory.
Brother your enthusiasm on this thing makes me wanna pick one up for a truck/camping gun. 😆
It's been a great revolver. No problems at all and pretty accurate for a snub nose.
@@ToolsandTargets pregunta, que tipo de bala para defensa +P calibre 38, o plana, o punta hueca.???
Saludos desde Panamá
@wilbertomercado3809 hollow point for self-defense
I can see this channel getting big soon! Great review, sound, and camera work. Just wait til you get noticed! Keep it up man!
Appreciate that. We're gonna keep it rollin along!😎
I have one, it runs perfectly. I polished the cylinders, and like you painted the sight. I run the plastic grips, which I textured along the back heel. It’s the least expensive pistol I own, but I shoot it a lot because it’s a lot of fun.
Good review. I have been keeping a watch on those 38 revolvers, and the RIA 12 gauge pump action shotgun that RK has been selling. For the most part, I have been hearing good things.
Thank you sir. So far I'm 2 for 2 on RIA guns being great.😎
I'm really digging this little gun! I need a pocket gun for summer!
I think it's a sweet little gun. It would make a great pocket gun or even a backup ankle carry.😎
@@ToolsandTargets I gotta go find me one now
@@ToolsandTargets i would definitely use this as a backup
Get a Taurus 856 or 605.
Your lookin at the right one. I’ve put a ton of rounds through mine, first one I bought my brother fell in love with so I bought another one. I’ve bought a Maverick 88 I haven’t been able to make fail and a Taurus g2c back when they had those rebates. These are the best 3 values I’ve found in firearms, this one being my favorite. It weights 24 oz. which make it shoot really smooth. Little orange paint on that front blade, and you’ll love this little gun. I’ve got an untold fortune in handguns, this inexpensive revolver fills a niche for concealed carry, it just does.
I have two of the M200 revolvers, and I put those stubby, little M206 grips on them for better concealed carry. I have large hands too, but the little grips aren't any problem for me. Those Rock Island revolvers are a super value for the money.
Totally agree. I think they're fine revolvers.👍
I own the model 200 with the 4 in barrel and I love it . Good stuff Wildman and good shooting. 👍
Thank you sir. I almost picked that 200 up the other day. I'll probably get it after seeing how good this one did.😎
Love my M-200!!💗
I love my RIA M206, I have mine for more than 3 years now. I spotted it when I was travelling in the Philippines. I went to the range almost every weekend with it. I have more than a thousand rounds fired in it already. I know this little pistol will go toe to toe with bad guys in Chicago. Yes, I loaded it with +P ammo at the time.
Back when I still worked for Academy Sports, I picked up the M200. Retailed for (at the time) $219.99. My employee discount, plus Academy credit card discount brought it down to $167.20...but after tax $184.08. Best (sub) $200 I've ever spent on a gun. Huge bang for your buck, especially if your'e a little cash-strapped and you need something to protect your home, yourself, or loved one.
My only nitpick complaint is that I wish the grips were a little thinner so I actually utilize the speed loader I have (HKS DS) as well as the factory sights leaving a bit to be desired.
Edit: Just remembered I have a Kel-Tec P17 that at the time, retailed for $199.99 and I used the same two discounts to get it down to $167.34 (after tax). Pro Tip: if you shop Academy, sign up for the card and just pay the balance while at the register. They'll let you do it as long as it's cash, check, or debit card (can't use another credit card) and you'll get an easy 5% off everything and not even worry about the interest. It's also stackable with employee discount, teacher, first responder, military, and healthcare worker discount (10% off when active).
Nice. I had thought about picking up the 200 too.
( the grips were a little thinner ). You need to cut the grip left size little bit, and not try to insert the whole speed loader in, all you need is insert the tip of ammo will be OK.
Love the enthusiasm, might actually subscribe just picked up the Rock Island 206 Myself. Can't wait to go plinking
Appreciate that! This has definitely been a nice little revolver to have.👍
I remember the old Colt Detective - .357 Magnum, it’s a collectable now and I always wished I had one. It always had the right kind of frontal weight to it because of the short bull barrel.
Yeah, Such a great look to it too.
I have both M200 and M206. I installed Pachmayr grips (Colt D series) on them. Makes a WORLD of difference in recoil!
I'll have to check those out. Thanks for the advice.😎
@@ToolsandTargets You’re welcome! Pachmayr part number 02513.
I have XLG hands too & have been carrying/shooting a J Frame S&W since 1968. I’ll either replace the grip or add a Tyler Grip Adapter to aid w/that smallish wood grip that comes on most of these guns.
I have a S&W Model 37 from the late 70's that has some super tiny grips on it, but it sure does look good.
I think it's a cool little pistol. It's interesting that Rock Island went with more of a Colt's style action with the cylinder release and cylinder rotation. It seems most companies copy the S&W style. I like how this looks with the wood grips. With that skinny grip and the Colt's style cylinder stop, it looks a lot like an old Detective's Special. If it was mine, I'd take some Scotchbrite to the finish and make it look like an antique gun with the finish worn from use.
Not a bad idea.👍
The finish on these seems to have improved a great deal in the last 5 years!
The early ones back in '17....man a lot of machine marks.
this looks much smoother.
It's pretty nice for as little as you pay.👍
@@ToolsandTargets looking to get one for the wife. I have an option of "building" one of the barreless model 10's like JG has for 2 c notes PLUS finding a 2" barrel...or one of these and done.
she likes my model 10 after my trigger spring job but with a 4" barrel, its a bit much for a purse.
Another good video Tools!! Love my 1911 Rock Island 45 that you also have ❤️ so I’m sure that revolver is great! Keep the videos coming!!
Thank you ma'am. RIA is 2 for 2 on the keeper list for me.👍
My first gun was .22lr because I wanted something cheap to train grip and to practice cleaning. After a couple hundred rounds down a 6inch Ruger Wrangler, now I'm so ready for this detective revolver. I feel like I can take this on the hot trails to have my back from wild javalinas or coyotes.
😎👊
.38 special is my FAVORITE gun to shoot - not sure why, it just feels right and hits where I want it to almost as if it was an extension of my own body.
😎👍
That’s exactly how I felt with a Ruger SR9C. I went to buy one this weekend only to find out they’ve been discontinued! 🙄 I shot a S&W model 10 several times and liked it, but the sights were horrible
@@mshafer1021
you can find the SR9C on gunbroker, I have the full size and they shoot great
Thanks, I'm thinking of getting one as a backup/pocket gun. Looks promising and they are a great price.
I love revolvers and seem to shoot them better than semi-autos.
Thanks for the video!
Appreciate you checkin it out!
I have owned a Rock Island M206 for a year and I have hand no issues except the wooden handles, I replaced them with larger plastic grips and grip tape and it is an excellent concealed carry.
Those trigger pull weights were coming in nice an consistent. I'd like to see what it looks like after a few thousand rounds and some carry time. Looks like a good fair priced little carry rig.
Yessir. This thing has been great. Hard to beat for the price.
Thank you for the awesome review and keep up the good work I love your channel. I just placed an order for one of these got it for $229.00 and Sportsman Warehouse had a 20 buck rebate so it was $230.00 out the door. Now just waiting for it to arrive.
Thank you sir. That was a great deal!
I like that one. I should have got one a couple of years ago. They are going for around $300 now. That hammer spur is huge. I might would get the spurless and definitely go with the plastic grips. I saw a review HO did on it and he like it as well.
Yeah, if I was gonna use this, I would definitely put the larger grips on it. I just liked the look.😎
@@ToolsandTargets Yah, that 1950s detective look.
I picked up my Model 200-(the 4" barrel version) new, at my local Academy around a year ago. It was marked $249. But it was the display model and I talked them down to $159.
It came down to this and a used model 85 I went back today the rock island was gone. It sucks that she was gone but the model 85 came home with me because to find a 38 for under 300 theses days is hard to beat
It definitely is. This RIA is a winner so far but I've never had a problem with any of my Taurus' either.😎
I might have to pick one up myself but its 300 bucks at my nearby FFL. They are charging a arm and a leg for the ammo. FYI the one I want has a 4 inch barrel btw. Great vid man.
Thank you sir. I almost got that 4" model 200 also. I'll probably pick it up sometime in the near future just to have another .38spcl.😎
Gun looks perfect with those wood grips on it. Looking for a new revolver myself but in .45. One day I’ll find one that catches my eye. Keep up the great videos.
I think the wood grips definitely give it the look I wanted. Appreciate you checkin it out.😎
love the looks of mine with those wood grips the problem was grabbing it quickly and getting on target had to put the black grips on mine very comfortable to carry and i seem to grab for it and leave my more expensive ones in the safe. I tell everyone to buy one as a back up if nothing else inexpensive and accurate. Win Win
Yessir. I would definitely use the block grips if I was gonna carry it.
I just bought one of these. The wood grips are what sold me.
Same here. I love the old "detective" look of the wood grips.😎👍
I got the 4 inch barrel version with rubber grips. Awesome pistol for about$200. Ive punished it pretty hard and its holding up well. My only issue is that my friendgirl likes it so much shes trying to claim it
I took a shot every time he said “little” and now I’m dead. But yea, as long as you don’t get a lemon, for the price you can’t beat these little pistols.
😂😂😂
RIA does have excellent customer service. My new Model 200 had a timing issue right out of the box. They paid shipping both ways and covered the repair. I had the revolver back in 2 weeks. It's repaired and now feels like it has a custom action job.
Thanks for the review. I like the wooden grip for portability.
Thanks for checkin it out. I still have the wooden grips on this one. I love the look of em.😎
Man I'm thankful to hear this review I just bought one with my buddy this morning can't wait to take it the range after this
Mine has been great!
Just got back and it's hella of a gun I'm enjoying it. In my eyes it seems to be worth the purchase to be honest
Love the little snubby's. Might have to pick me one of those up. I always call them the " Barnaby Jones Specials" after the TV show.
Haha, yep. I love the look of this gun.😎
@@ToolsandTargets .... He could hit anything within a hundred yards from the hip with his, 😆😆😆😆
Love the Old School looks ... Maybe someday if the moon is right I will find me one ! AWESOME Video pard :)
The old timey looks is what sold me for sure. Thanks for checkin it out my friend!😎
I just picked one up last week can't wait to take it out, got the spurless one. Your video is the best one online. thank you sir!
Appreciate that! I think it's a great revolver. Used this one for some more testing last week.😎👍
I just got back from putting some rounds through VR80. That looks like something I wouldn't mind adding to the RIA line at the house.
Nice! I would have bought that VR80 myself if I hadn't already gotten the JTS I picked up a few weeks ago. So far, Rock Island stuff seems 100% solid.😎
@@ToolsandTargets It did have a little break in where it ran better with the heavier rounds, but now it eats everything no problems
@@j_chill1290 what did you use for your break in? Someone suggested for us to try 3inch shells with 1550 velocity. The videos I've seen mostly are using 2 3/4" 1350 velocity.
@@absolute99proof I used the 2 3/4 with a 1290 velocity. I ran a lot of the Winchester super x game load.
@@j_chill1290 thanks for the info.
very accurate at double action, congrats to your purchase!
Thank you sir. I was pretty surprised how accurate this little gun was.😎
Not too shabby. I'm impressed.
Not a bad little wheel gun for as inexpensive as it is.😎
@@ToolsandTargets Rock Island makes some pretty impressive stuff for the price point. Their claim to fame is to make quality product at the working man's price. Definitely can appreciate that in today's market.
i recently purchased the m206.. cool lil gun. dope video and review. your lingo and accent had me literally on the floor laughing.. lol
Appreciate that! It's a nice little revolver.😎👊
Nice dude! I love some tiny pistols, and revolvers are a bonus. You can reload 38 for just about the same price as 9mm 🇺🇸👊👍
Easier then having to bend over and pick up brass after an auto loader spits it on the ground too.😎
Lol I told you to get some knee pads lol
@@ToolsandTargets that's one of my favorite parts, no bending over to pick up the brass!
Damn Tools your as bad as I am. Girlfriend chewed me out last night for wanting another gun lol.
LOL, stack em deep!😎
@Gorxon Andrews Very smooth all the way to the break and very little stacking at all that I noticed. Usually if I aint complaining about it non-stop in the video, it wasn't bad. LOL... Did I mention it was little?😂
Ask her how many purses and shoes she has.
Looking at this for my mom- she's 65 and has had carpal tunnel (and the surgery for it). She currently has the little Glock .380 and has trouble racking the slide so she want's something easier overall. She shot my Taurus 65 today with .38's in it and she said it was easier to shoot, just too heavy. I told her one made just for .38 would be smaller and lighter, lol. This looks like the best option for her hands, and budget.
It's a great revolver but it is a little heavy for it's size.
@@ToolsandTargets Still almost a pound lighter than the 65 with the 4" barrel so I think she'll do ok. She handled my dad's 605 after and thought it was more comfy. And since the weight soaks a little recoil (she liked that part on mine) it might be just right for her.
@@captainnibby I like some weight to em myself.😎👍
I bought mine for the wood grips, but found if you have man sized hands, you will never take the plastic ones back off.
Yeah, there's no doubt those plastic ones would be a lot easier to hold on to for me. I had to tuck my thumb down to keep it off the cylinder of this little sucker.😂
Not only do I own RIA revolvers, I also own some old PARKERIZED 1911s from RIA. STANDARD WW2 TYPE SIGHTS FOR A DISABLED SENIOR THAT ARE EASY TO RACK ONE IN 5 INCH AND 3.5 INCH BARREL. REST ARE REVOLVERS. ROCK ISLANDS ALONG WITH A 4 INCH SMITH M64 AND 2 TAURUSES 856 ONE IN 2 INCH STAINLESS STEEL AND 3 INCH 856. GOES WIT MY 4 INCH 64. IF YOU PICK A REVOLVER FOR HOME OR CCW, YOU MADE A GREAT CHOICE. YOU GOT THE RIGHT AMMO AND TEACHINGS ON REVOLVERS AND DON'T LET THE FORUM COMMANDOS SAY TO YOU ANY DIFFERENT. PERIOD.
I'm really liking revolvers lately. They add a whole extra layer of fun and I also don't have to bend down and pick my brass up off the ground!😉
Great review ! I have this little sweet heart . It's perfect for conceal carry. If I'm in a more combat zone I'll carry the Glock.
Thank you sir. Great little revolver.
Rock Island $240 with gun case box.
S&W $700 with land fill garbage box.
😂🤔😭
God bless
LOL, I know right. Heaven forbid they make $1 less by throwing in a little plastic case.😂
Lmao!! This is so true. “Land fill garbage box”. That is hilarious.
*YAWN*
If that is where your critical thinking skill set arrived at by logical inference...well
Bless your little heart...
“No,”
Unequivocally, unambiguously and plainly, yes.
“I did Gunsmithing and Firearms Instruction my entire career. I've been a S&W Armorer for over 30 years. I have also worked on these RIA Revolvers for the last few years.”
This is called a non sequitur, or colloquially known as a logical fallacy.
“I know EXACTLY what I'm talking about.”
Regarding you being a smith, I have no reason to doubt you.
Regarding the laws of logic and committing logical fallacy, you are drowning in an ocean of them.
“My "Critical Thinking Skill Set" arrived at the Firearm, it's inner workings and durability.”
And this is the heart of the matter. My original post had nothing to do with *THEE QUALITIES* of *THEE GUNS,* but only *THEE PRICES* and *THEE BOXES* received.
“But.....Duh, it's a really cool box so it must be a really nice gun.”
Again you double down on poor logic when you've been corrected…
Why ?
Because you infer I commit the fallacy known as a category error (gun=box and box=gun), which I never committed.
And two, you commit the logical fallacy known as a strawman. (Ignoring what I said and building up fake argument that I never made, in order to easily attack it)
*Good grief...* are you trolling me ?
*lol...*
*Preemptive response :* If you must continue therein with demonstrating the clear fact that you are no logician, have at it. But I suggest studying logic so you become more effective in argumentation, because you have failed here miserably.
Best Regards
^^^^^ best read this year, thanks guys!
Watching this while glancing at my M206. Great little gun and will kill!
Yessir. Haven't had a single problem with this one.
I've been eye balling these little revolvers at dunhams sometimes they have them on sale for 209.99 and I have seen them for 199.99 but not has often. I'd like to get a Taurus 856 in 38special or the Taurus tracker in 357mag in stainless. Hopefully I'll get one this summer if somewhere gets any in. Would really like a s&w 686 or something of that kind but I can buy two Taurus revolvers for one s&w.
This little gun really surprised me bigtime with how accurate I was able to shoot it. My Rural King has some S&W airweight models but I really don't like how light those guns are so I never have gotten one. I've been looking at the m200 model Rock Island also. I think that's gonna be my next .38 revolver.
I am picking mine up from my local Dunham's Wednesday night . Dunham's is really an amazing store with top notch customer service.
Yep got one last night but with big hands I had to put the plastic grips on it but it feels nice in my hands and the weights not bad at all and going to take it out to the range today brother and fire a few cylinders. 😊
I'm interested in this revolver but I'm conflicted because of the negative reviews I've seen. Any malfunctions shooting it? I like it because it looks like the Colt Detective Special. I don't expect it to be a Colt for $225 but I'm looking for a decent snub nose for concealed carry.
I haven't had a single issue with this one.👍
Really impressed to see the trigger pull in DA. Out of the box most Smiths and Rugers are over 10 pounds.
More and more I'm wanting one of these little buggers.
I think this is a heck of a deal for how well it runs.
I liked your video. I had just bought one 4 weeks ago, but havent had a chance to shoot it yet. Wow, the accuracy. I hope mine shoots that good. I did opt to purchase a set of Colt Detective Pachmayr grips. They are softer than the plastic ones that come with it. Its much more comfortable with those. I like the parkerized finish also. It gives it that military look.
Thank you sir. I actually have been looking at those grips myself. I really like the look with the wood ones but I don't like having to modify my hold to get a good grip on them. I think it's a great little shooter.😎
@@ToolsandTargets the wood grips look cool, like the old detective and probably ok for CC but for what you were doing I bet you could do even better with these larger soft grips.
I have shot it now. It shoots great. I used the new grips. Much easier to hold. I didnt go for any accuracy. I was just getting used to the gun. Great little gun and the grips are really nice to hold much more comfortable to shoot. I guess the wood grips or ok for CC.
@@rogerwilliams4428 Nice! I bet the bigger grips are definitely much better for shooting with.😎
🇦🇺😎👍Another golden oldie. Straight to the pool room🏁🤠👊🇺🇸
Take a drink every time I say "little" in this one and you'll be stumbling before the 2 minute mark!🤣
@@ToolsandTargets 🇦🇺😎👍High powered Handguns , V8s & Whiskey💪🤣🍻
I have the 4 inch with the black plastic grips on it. Good shooter but those grips do kinda bite just by the webbing and knuckle on your thumb. I got a set of those wood grips to see if they felt better. They didn't. Made it look kinda silly too. Looked like a Mauser broomhandle revolver! Good video, thanks.
Thank you sir. I'm considering picking up that 4" model also just to have in the collection. I wonder if Hogue makes grips for it. They're always nice for what I've put em on.
Nice snubby, good test! I have an ammo test suggestion: Winchester USA Ready Defense Grade. I just fired a box of their 124 gr 9mm +P through a couple of Glocks and it shot great.
Thank you sir.
i like the wood grips, fits in your pocket better
Yeah, the grips are what made me wanna buy it. I think they look cool on it.😎
The plastic grips look like it would be for big hands. I like it with the wood grips !
RK has this on sale for $222. Think I'll pick one up. Thanks for the review.
I saw that this morning. Definitely a great deal for this revolver.👍
The plastic grips make a world of difference on that little pistol
Been looking for a 38 special revolver. My local gun store has them for $289. Think I might pick myself up one.
I think it's a great gun. Haven't had any issues with mine.
Nice looking Revolver Tools nice shooter Stay Safe My Friend🇺🇸🇺🇸
I was pretty surprised how good it shot honestly. Thank you for checkin it out, brother!😎
Where can i get a decent holster for the m206
Not sure about that. I haven't looked for one.
Colt Detective Special holsters should be compatible or close to.
I have the RI with the 4 inch barrel . It shoots real good .
Nice. I almost bought that one last week when I was in there. I'm a gunaholic!😆
I have the Rock Island Model 206. When I shoot it double action with regular .38 loads it locks up after the 4th to 5th round. Locks up means I can't pull the trigger or pull back the hammer to shoot it again.
To fix this malfunction I have to release the cylinder and close it again. I talked to a local gun shop about this and they do not sell the Model 206 anymore because of this problem. I sent in a Rock Island M5 shotgun for repair because it fell apart after shooting 10 rounds and had other issues. It came back unrepaired. And I did not get my orange plastic part to show that the chamber was clear. I contacted them asking for it and never heard back. So I'm not going to waste my time sending this Model 206 38 for repair. Oh and the trigger pull is so clunky.
Ahh that sucks to hear. I guess I've been lucky with this one. Haven't had any troubles out of it yet. Hopefully my luck continues.😆
Complainer is probly just a glock troll i love mine@@ToolsandTargets
I have one and I love it but the ammo is really hard to get
😎👍
Rock Island are nice guns for the money and very reliable Thanks for the great videos God Bless & Be Safe 👍🎅
Thank you for watching and commenting on all of em! So far so good on both of the RIA's I bought. Definitely happy with the pruchases.😎
@@ToolsandTargets Did you ever shoot a Charles daly 1911 they have them here for $475.00
@@frank6029 I don't think I've seen one here. I'll have to look and see if my local shop carries those. Seems like a good price.😎
Now that's the box my 1911 came in, lol
They probably just reach for the once closest to em on the assembly line.😂
Nice shooting! I always enjoy your videos.
Thank you. Really appreciate that!
Yeah, the wood grips look cool, but for actual shooting, I prefer the larger, molded grips. I have a Rossi, 5 shot, snubby with rubber grips that shoots extremely well. I noticed the Colt-style cylinder release (of which I'm not a big fan). I'm not, however, planning on parting with my 6" Python because of that minor detail!!🤣🤣
Yeah, from what I've heard, Rock Island used a lot of old tooling and such from Colt for some of their stuff.
I think you found a new best friend with that snubbie! I love mine! Wahi' Valleys
It really surprised me how good of a shooter it is.😎
that thing is a little shooter...I need to get one of those.... RIA makes nice shooters....Great review! thank you Bro
Thank you sir. It shot pretty doggone nice to be as stubby as it is.😎
How's the lock up on the 206, is there alot of play in the cylinder? I'm considering one but not sure if I want the Rock Island or a Taurus. I want a cheap beater snubby but I'm on the fence. I'm leaning towards the 605 since it would let me use 357 too but then again the 605 is tiny for a 357. It probably wouldn't see a whole lot of 357 anyway and the 206 would give me an extra round. I know there's also the 856 but my ffl has the Rock Island and the 605 for around the same price. They're charging more for the 856 so if I'm going with a 38 might as well be the Rock. It's for beater use anyway
That M 206 Is Legit I Mean Very Legit ❗️ It shoots Better Than Alot Of Other Revolvers I've been shooting guns for years and I'm impressed with it I've had zero issues with mines❗️
Hey I'm Planning on Buying The Rock Island 38 Snub Revolver and The Bersa Thunder 380...
Nice! This little Rock Island revolver is great.
I planned one getting one for the house I think it'll be just perfect
Mine has been perfect so far.👍
I got the m200 version, solid no bullshit gun. Probably be really nice if you put a hogue grip on it.
I love me some Hogue grips. I put some on my .44 magnum Taurus Tracker and it made a huge improvement.😎
I get what your saying about the grips but, I also think the big plastic grips and the flat finish it has gives it an apocalyptic/zombie horror game kinda look. I’ve shot a few hundred rounds through mine went bang every time for me 🤷♂️ I do remember it came pretty oily from the factory
Some people like to talk junk about these revolvers, but mine has been 100% perfect.👍
Crazy isn't it? With mine I shot it better with double action as well. The hammer stages well and breaks as a surprise every time. I really liked that little gun as a cheapie. I shot some 148 Grain hot loaded DEWC's in it. They shot the best.
Browne Works makes wood grips for the 206,seem to look nice.Just subbed
That’s a very classy looking revolver I need look into getting me one
The look of this one is basically what sold me on it.👍
@@ToolsandTargets I couldn’t sleep last night so I spent the time binge watching your videos
@@Droladnap Appreciate that brother! Plenty more stuff to come!
Nice, not bad on the trigger pull
I was pretty surprised what a nice little gun it is once I figured out how to get a hold of the skinny grips.😎
Wow you’re fun came with a hard case. I got the exact same gun and mine came with a cardboard box and a little zip up pouch.
Mines been great for 500 rounds. My buddy got one a week later. Transfer bar was binding. He sent it back before firing anything from it.
Ahh, hate his had trouble.
I will say though, I bought it for the novelty and because I wanted a demonstration pice for teaching basic pistol and PTC courses. Now it’s proven to be a back-up or easy carry for running trails, but now I’m intrigued and am going to pull it apart and polish everything. See how much better I can make this thing. Give it some good grips and make it a good fighting snubby
Did you ever try the plastic grips?
You seemed to do alright with the smaller wood grips once you got a good handle on it.
I'm about to pull the trigger and pick me one of these up. I don't have a 38 special, but I have ammo....lmao!
No, I haven't tried em at all yet. We did some shooting with it out at my range this weekend. and everybody shoots this thing super good even with these little wood grips. This is a heck of a little gun for what it costs.😎
Finally got it and had a chance to shoot it, so I had ordered it online so when it comes I had to all the Washington State background check wonderful stuff.. (not). But I have to agree with you brother that little thing shoots really good. I ordered some Pachmayr 2515 Compact Grips, Colt D Frame Post 71 grips off of amazon. This little thing shoots great. thank you again I bought it because my dad used to have the colt defender and your review and of course the price this is really close to the colt but it will not be replacing my hellcat or my iwi Masada ... heck not even my Taurus G3C. But it is a cool little gun. I think you should do a review on the IWI Masada it is a really cool gun also .. I love mines. Thank you you again and keep putting out the wonderful content.
Thank you sir. Glad it worked out for you. I may have to jump on the Masada train.😎
Love mine worst part is finding ammo for it I've only found 2 boxes in last 2 months
When you do find it, it costs as much as another gun.😆
@@ToolsandTargets I found a box this past weekend was 19.97 for 20 rounds of winchester silvertip and the box before that was 32.99 for 50 rounds of pmc
Great video, this will be my next purchase if I don't go with the 12 guage... Nice video my man stay strapped and stay dangerous
Thank you sir.
Is RIA has a new plastic grips for it
That's because it looks exactly like the piece Columbo carried lol love it
Yessir. The look absolutely sold me on it.😎
What an enjoyable video, they should hire you as a spokesman for their products. I'm going to try to order one tomorrow! 🇺🇸🇺🇸👍
Thank you sir. I really appreciate that.😎
Can’t find these anywhere right now. At least the one with the spur
My RK almost always keeps these and the model 200 in stock. They have it in stock on their site right now too.
I have some questions about this revolver. Can it handle plus p ammo? And how's it holding up a year later? Would you say that this revolver is as good as the Taurus equivalent? I'm looking at one of the RIA's and a Taurus equivalent at one of the local pawnshops and I've been sort of looking at revolvers for my personal carry but money is a little bit tight right now. I figured that I would buy budget friendly now and later when my financial situation gets better I'll step up to something a bit nicer like a Smith and Wesson or a Ruger. My current carry is really a bit awkward for cc so I'm either looking at revolvers or a pocket 380. Something more concealable without the pain anyway...
It can handle +P ammo and has held up perfectly. As far as comparing it to the taurus ones, I would say the taurus has a slight edge on fit and finish but as far as function, they're pretty much identical.👍
Listening to you I immediately was drawn to your voice. It took me a while but I finally placed your voice with an old cartoon show I watched in the 1960s called ' The Hunter'. I had not thought of that cartoon in all these decades until hearing your voice. You sir, are ' The Hunter'. Watch an episode here on RUclips.
Now I'm gonna have to watch!😆😆😆
I think I’m going to get one of these for a girl I know. Do you think a hollow point will open up at the slow speed? I’ve already watched one we’re you tested ammo Inc and another one neither doing well.Thanks!
It's tricky to get a .38 special that opens up and gets good penetration from a short barrel.
@@ToolsandTargets Xtreme defenders probably do the trick. Just so dame expensive.
If you could only choose one. This little banger or the Taurus 856?
Probably the Taurus. they both have been perfect, but I think I like the look of the Taurus just a little more.