It was very good! Their explanations are very easy and practical. The quality of the camouflage you get is amazing. Congratulations and keep giving us great videos. I'm from Brazil and enjoy your videos very much.
I like it 👌 I did that with cable ties to my ssx303 cover. Dam par cord took forever!! Also my friend lets get you some cable tie cutters . You are using a Rambo knife for crafting is hilarious 🤣. Great video 📹
The 360 camera is a little alright. Locative woukd work but it may work too well you may it be able remove them without breaking them again so low strnght glue is advisable
@@FOXGREEN Ye just a suggestion, because I saw Josef Mucha using it on his gbbr screws and I just had the idea, never used it myself tho so thats good to know👍
@@FOXGREEN thank you for the quick response. I’ve been considering that one but it’s quiet expensive, but since it has been recommended by you it can only be worth the price
Fox I’m at the middle for crafting my rifle cover by Novritsch do you still believe cable ties are the better method to applying cover to rifle have you had any problems with cover moving about within gameplay thanks 👍,,,, ps 11:22 in clip 😂😂😂 just doesn’t f**king matter,,, brilliant 😂😂
Cable ties are OK man I still use them if you have bu gey cord it would probably be better though the cable ties are a little sharp ans uncomfortable at times but at least you can remove the cover quickly if needed
Great video I enjoyed watching, it gave me new ideas on how to design mine. However I found that the gun cover was a little weak. When you did the pull/ stress test I was surprised because mine tore while getting in on. (Not thw netting where you put the pins through but the 3D camo part )
Really that's intresting beacuse you could see I was putting a lot of pressure on it. Maybe when you pulled it on it ripped off something sharp on the gun maybe?
Great video! I recently got the Novritsch Modular Ghillie Jacket, pants and hood in Amber. I also bought raffia, and various leafs to further craft the suit and the rifle. How many leaves in total would you say you need for a suit and rifle?
@@FOXGREEN 5-6 boxes in total with slight variety in color? Various green ones? For summer. So with each box having 50 leaves (double leaves) you’re looking at 250-300 leaves for the whole suit and gun? That’s far more than I was estimating.
Ya inunder estimated it too thats what I need for my local site but it depends on the environment you need to match. My suit required a lot of coverage so was very leafy. If you don't have many leaves on your site then less maybe 3 boxes
What do you think of the durability of noveritchs leaves, kicking mustang did a video of the leaves and was able to rip them quite easily what do you think of the durability of them.
I think for what you are using them for they will be fine I haven't had a leaf come off the stem you will loose some eventually but honestly that's more due to them coming of the pins rather than then coming if the stems so thats why I glue them in slightly to prevent that.
On 1 joule so far I get brilliant range out to about 68 m using 0.32 gram bbs I jave yet to try 0.36 range wise they may just do a little further bit haven't tested it yet. I think 0.4 the range would start to drop off even though it can handle then hop wise.
@@FOXGREEN Only new to the airsoft scene but using .28s for my 417 and find that any bit of wind will affect the bbs drastically so maybe I’ll try the .32s. Keep up the good work and hopefully see you at Urban Assault soon!
I’m a bit late but I’m not very keen on spray painting my sniper but would you think camo tape would be a good substitute using the new novritsch ssg10 camo wraps? (btw only using for exposed areas of the ssg10)
The nov drilled wrap is the perfect solution is you don't want to paint your rifle. I didn't paint my ssx303 and the wrap cover it perfectly so I really like them 🙂
@@FOXGREEN the foliage was all the same except for where you was it was pushed back like you walked in then got in your spot other then coming from behind it and your rifle still makes a straight line but overall it was not bad
I'm amazed with myself I actually did spot you, but not the gun, not enough green on the suit for that bush, I saw you as a out of place dark patch in the bush. Or I got lucky 🤣
ye after watching your vid i saw on the novritsch story's that the leaves where back in stock so ordered 3 more boxes in different colours and styles, just waiting on KMCS 3.0 to be released now
![Gear - Novritsch - Anti-fog unit /système anti-buée [French]](http://i.ytimg.com/vi/zTIzqdGH1P0/mqdefault.jpg)
It was very good! Their explanations are very easy and practical. The quality of the camouflage you get is amazing. Congratulations and keep giving us great videos. I'm from Brazil and enjoy your videos very much.
Thank you every much I am glad it helped 🙂
Love it! Another brilliant video Kieran!
Thanks buddy 😁
Most people: *cuts things with scissors*
Fox Green: *B I G K N I F E*
Lol you have a point xD
Reminder is on 👍
You got amber didnt you?
It's not Japanese vegetation, but I always refer to it.
@@浜ちゃん-i2i sorry what do you mean. I was referring to the colour pattern he got amber or multicam
@@ShatterSoft
sorry.I don't understand English at all. Should I answer multicam? I use it all the time. I don't know the amber color.
@@浜ちゃん-i2i cool that’s fine
Great job mate!!! Looks amazing.
Thanks buddy didn't fo much to it 🙂
Cant wait
I hope you enjoyed it :)
Yup
mate the usage of your 360° camera is so sick!
Thanks man 😁
Imagine if the leaves did break when you pulled them. That would be soo funny haha
Haha it wouldn't be great if they did 🙂
@@FOXGREEN nope it wouldn’t 😂
Great video again
Thanks 😁
Sorry I was late to the show, but great little video. I got some ideas for my 303 ghillie cover that is coming in April.....
Sweet can't wait to see them on your channel then lad 😉
Nice video man!!!
Thanks buddy 🙂👍
Use elastic bands
Yip you can do its up to you I like the strnght if rip ties personally. I have tired both in the past 🙂
Awrsome video! Thanks
Thanks 😁
Great video as always 👍
Thanks 🙂
I like it 👌 I did that with cable ties to my ssx303 cover. Dam par cord took forever!! Also my friend lets get you some cable tie cutters . You are using a Rambo knife for crafting is hilarious 🤣. Great video 📹
Haha its a bit big alright 😁
Nice and to the point video 😊
Thanks man 😁
Do need to get some more stuff from Novritsch however due to brexit we got new import taxes and that, and have no idea what any of it means...
Before you check out it will say the cost of shipping it should all be covered on that but it means you will pay more for shipping is all essentially.
Do you know of any ghillie pants with belt loops?
Actually no I don't Yetminster have pull string bands though to help them stay up
@@FOXGREEN Ok
The intro got me puzzled and just great video in general:) 👍🏻
Thanks man 😁
Jeez I can't get over the camera angles there so good, must have been a pain to edit
Edit:Would locktite work on the pins for the leaves
The 360 camera is a little alright. Locative woukd work but it may work too well you may it be able remove them without breaking them again so low strnght glue is advisable
@@FOXGREEN Ye just a suggestion, because I saw Josef Mucha using it on his gbbr screws and I just had the idea, never used it myself tho so thats good to know👍
What ghillie suit do you use iv been searching for one since months now and I need some recommendations
I use the KMCS by kicking mustang at the moment its a great suit can't fault it 🙂
@@FOXGREEN thank you for the quick response. I’ve been considering that one but it’s quiet expensive, but since it has been recommended by you it can only be worth the price
Fox I’m at the middle for crafting my rifle cover by Novritsch do you still believe cable ties are the better method to applying cover to rifle have you had any problems with cover moving about within gameplay thanks 👍,,,, ps 11:22 in clip 😂😂😂 just doesn’t f**king matter,,, brilliant 😂😂
Cable ties are OK man I still use them if you have bu gey cord it would probably be better though the cable ties are a little sharp ans uncomfortable at times but at least you can remove the cover quickly if needed
@@FOXGREEN cheers bud appreciate the info keep up the snips 🔫🔫😂
Great video I enjoyed watching, it gave me new ideas on how to design mine. However I found that the gun cover was a little weak. When you did the pull/ stress test I was surprised because mine tore while getting in on. (Not thw netting where you put the pins through but the 3D camo part )
Really that's intresting beacuse you could see I was putting a lot of pressure on it. Maybe when you pulled it on it ripped off something sharp on the gun maybe?
@@FOXGREEN yeah you really put your back into it 😂 I think it was the angle but I would advise others to be careful not pull on it too much
Ya 😅
Looks good!
Thanks man didn't add too much bit did the job
Looking good! Will you miss the ssg24???
I have it back again so I'll be using it still 😉
Great video! I recently got the Novritsch Modular Ghillie Jacket, pants and hood in Amber. I also bought raffia, and various leafs to further craft the suit and the rifle. How many leaves in total would you say you need for a suit and rifle?
I'd day you need about 5 to 6 boxes
@@FOXGREEN 5-6 boxes in total with slight variety in color? Various green ones? For summer. So with each box having 50 leaves (double leaves) you’re looking at 250-300 leaves for the whole suit and gun? That’s far more than I was estimating.
Ya inunder estimated it too thats what I need for my local site but it depends on the environment you need to match. My suit required a lot of coverage so was very leafy. If you don't have many leaves on your site then less maybe 3 boxes
@@FOXGREEN Thanks a ton for the info! How many packs of the multi-colored Novritsch raffia do you think for the entire suit and rifle cover?
One is fine there is a lot in it but suits don't need that much 🙂
To secure the wrap to the gun just use shock cord
What do you think of the durability of noveritchs leaves, kicking mustang did a video of the leaves and was able to rip them quite easily what do you think of the durability of them.
I think for what you are using them for they will be fine I haven't had a leaf come off the stem you will loose some eventually but honestly that's more due to them coming of the pins rather than then coming if the stems so thats why I glue them in slightly to prevent that.
Tidy job pal... Am about to spray up the SSG10 now myself..
Best of luck with it man :)
What weight BB’s do you find most effective within 1 joule, for your DMR?
On 1 joule so far I get brilliant range out to about 68 m using 0.32 gram bbs I jave yet to try 0.36 range wise they may just do a little further bit haven't tested it yet. I think 0.4 the range would start to drop off even though it can handle then hop wise.
@@FOXGREEN Only new to the airsoft scene but using .28s for my 417 and find that any bit of wind will affect the bbs drastically so maybe I’ll try the .32s. Keep up the good work and hopefully see you at Urban Assault soon!
Hey would you think that the cover would perhaps fit a action army t11 stock since the cover is so flexible ?
I think it may be a bit tight for the bodybas theybare chunky bit if you don't care about the bottom being covered it should work 🙂
@@FOXGREEN nice sounds great
Hey how do you find air soft fields i can’t find much
I just google "Airsoft feilds Ireland" and it brings them all up then check if they have Facebook pages and book in then usually via those.
Thanks so much have you ever been down to cork for one
I have a few times yip I am from Cork originally used play there for years
Do you think this would work on my M40A5 sport line
I think it may be tight but you couod make it work just use rip ties like me ti secure it and it will cover it pretty good 👍
Do you know if this wrap would fit an A3
Ya man it will.
I’m a bit late but I’m not very keen on spray painting my sniper but would you think camo tape would be a good substitute using the new novritsch ssg10 camo wraps? (btw only using for exposed areas of the ssg10)
The nov drilled wrap is the perfect solution is you don't want to paint your rifle. I didn't paint my ssx303 and the wrap cover it perfectly so I really like them 🙂
@@FOXGREEN that’s perfect man thanks 👍🏻
Ya I seen him from the start
I knew where I was and I still couldn't see me 😂 What have me away or what did you specifically see?
@@FOXGREEN the foliage was all the same except for where you was it was pushed back like you walked in then got in your spot other then coming from behind it and your rifle still makes a straight line but overall it was not bad
😎😎👌🏻
Thanks man :)
よっ待ってました
Thanks for waiting 😁👍
I'm amazed with myself I actually did spot you, but not the gun, not enough green on the suit for that bush, I saw you as a out of place dark patch in the bush.
Or I got lucky 🤣
Good job lad ya need to do a bit more with the crafting on the entire suit 🙂
ye after watching your vid i saw on the novritsch story's that the leaves where back in stock so ordered 3 more boxes in different colours and styles, just waiting on KMCS 3.0 to be released now