The first song I try to play on the guitar is "Spanish Romance," look it up if you have only hear My Chemical Romance, the original is pretty good. My dad played Green Sleeves. Yes you did hear Battle Block Theater music and "the pen15 (eek!)" in this random RUclips video about making a Home Depot guitar
this is completely overengineered. If you really want to be resourceful, make a guitar out of wood you chopped down yourself. I made a guitar with nothing but cedar trees, a chainsaw, hatchet, a worn-out carving knife, and some old guitar parts, it's not hard, it just takes a little patience. All you need for an acoustic guitar body is some material to make a sort of chamber that reverberates sound. The guitar body I made had all sorts of holes in it, but it still worked just fine, it was made entirely of soft wood, which is not ideal, but it still works just the same. The only improvement I could add is a threaded rod and bolts implanted in the neck so it can adjusted when it inevitably warps. Instead of the traditional method of framing, I made it out of crossing half inch by half inch studs, similar to a house frame, then I used old roofing nails and glue to attach the studs, connecting the body with the frame. There are always cheaper alternatives that give it a unique look, which I personally appreciate over this copy paste. I get that making something of your own is admirable in some sense, but there are more practical ways to get the same effect. Seems to me like a monumental waste of time and money from someone who doesn't know what they are doing, I don't mean for you to take offence, by your own admission, you're not that experienced woodworking. It's a skill that takes decades to master, I'm not even half decent at it myself. 5:00 the reason it breaks is because you are supposed to dampen the wood to make it more flexible, but more importantly, you probably didn't use the best wood for the job, not that you needed to. Everybody who does these kinds of diy projects always overspend on them, you don't need all these expensive tools and hours of precision crafting to make something everyone can enjoy I think my main issue is that it costs like $75 for a decent used guitar online, you can't really make a business or do anything useful with this type of project, its just wasteful for the average viewer to attempt it on their own
@@garbagecan6969I'm not going to waste my time explaining to you why so much of what you said is silly, I will just simply point out that you have clearly missed the point of the video. I'm just here to make entertainment, and making a guitar out of obviously horrible materials is amusing to me, and apparently many others. Nothing deeper than that
@@garbagecan6969"you're not that experienced at woodworking" because he didn't just make a solid guitar frame, doesn't matter if it's not complicated, that's good woodwork either way.
Its actually quite incredible that most of the notes were playable without an excess of fret buzz considering you just made this with plywood. Cool video, earned a sub from me ;)
@@wonton4658Steel stringed acoustics require truss rods & X-Bracing to support the tension of steel strings, nylon or classical guitars don’t need a truss rod and just use ladder bracing (what was done to this guitar) because nylon strings don’t use nearly as much tension. So basically he built a classical guitar! If he keeps the steel strings on this one it will eventually pull itself apart sadly!
@@leahkelsey3771 X bracing is only one style of pattern. Ladder and V bracing are also used. X bracing is just popular because it provides a more even sound. It's not inherently better (and in fact, I prefer ladder braced guitars because I think having a few strong frequency peaks imparts some character and beauty to the timbre). V braced guitars sound even more even, but they're a bit too dead on the trebles for my taste. Some V braced guitars I like, however. I think they need to be carefully voiced to not overdamp the trebles. I've noticed V braced guitars can actually be really clean across the frequency spectrum if they're voiced well, but otherwise sound a bit too dark. Truss rods aren't structural per se. They're actually there to help bend the neck to the proper curvature, which you will need to do if you go to strings with a different tension. Wood doesn't stay still over time, it tends to distort. This can really be a problem if the neck doesn't distort straight, hence the need to use quartersawn wood on the neck is pretty dire. The wood is strong enough to handle the tension from the strings, which is only about 150 pounds on an acoustic guitar. You can often stand on a piece of hardwood that is as thick as a guitar neck, which is a substantially higher load that the strings impart. Most failures occur at the base of the neck where the load is highest, or the headstock, where the wood is thinnest and is also undergoing more torque simultaneously.
Im glad someone else said it. Not only that, but homie could've used a pick, stummed some chords, but no, he doesn't "play guitar" as he proceeds to use 4 of the 5 fingers to play multiple finger style tunes, cause ya know "he just learned the tune for the sake of the video". I also don't know any single person that doesn't play guitar that wakes up and say "You know what, I'mgoing to make a guitar today."
Bro, this is actually really impressive. Anyone can build something to look like a guitar, but to build one that ACTUALLY plays is a whole different monster. Bravo sir, bravo
If he can make junk look and sound like that, I'd imagine a guitar built by him with knowledge, proper tools and proper materials would probably be a very well playing guitar. I am impressed.
I bet the end result would be a killer instrument but way less entertaining content lol. These guys are pretty good at playing dumb but the skills speak for themselves.
I was wondering this too. I've took one before, so my knowledge of building is a bit limited, but watching him just wing this build and it still somehow comes together was amazing. Also, he put all that work into making a proper maple plank for the back, but then just uses plywood for the top, where the strings vibrate.
Well, I was expecting this to be a random guitar build that wouldn't be enjoyable, yet this was actually both funny and cool to see the guitar evolve from just random Home Depot wood to something that's actually playable. Well done!
Funny video! I’m completely amazed that it was somehow playable. Considering you have nails for frets, and no real tuning gears, I can’t believe it actually plays. Well done.
For 2 guys having a few brews and messing around, hats off boys! I've been messing around building cigar box guitars and guitars out of canoe paddles etc. I laughed, i cringed and am impressed. Thanks gents
I bet if you put real tuners on it, it would be pretty acceptable. Nice work! It was like watching Beavis and Butthead build a guitar, but it worked somehow.
“It’s like the inverse of leg-lengthening surgery!”😂 I feel like there were a lot of great quotes in this video, but I think this was the best. Also, I love that even though this video was pure chaos, I now know how to build a guitar. Will I ever build one? No, probably not…but I could🤙🏼 Love the new channel🙌🏻
I'm amazed the neck didnt either bend or break without a truss rod. I build instruments, and some brand name guitars will bed to unplayable bows without a truss rod. Nylon string, sure but steel string tension is wicked as hell. You either got one lucky hard-ass piece of maple or some super light string gauge.
The truss rod being for reinforcement is a myth, it's only for adjustment. The OG Danelectros and Harmonys didn't have truss rods, they had a steel I-beam or square steel tube in the necks for actual reinforcement. 70 years later, and they're still straight necks. And those necks were made out of low-grade poplar.
The truss rod is more for adjustment. Over time that neck absolutely will bow until you can fire arrows from it. A metal insert of some kind would lend the guitar a ton of longevity but let's all be real, no one is playing that in two years, let alone 10.
It's for adjustment, but I've owned many old Kays and Harmonys and the like, and many with T-bars or single or double-reinforcement were bowed. And a beam won't stop a neck from twisting, ever. It's all in the wood and the care of the guitar. In my opinion. And I'm a twisted old man. @@irlikingpie
I actually really adore the ingenuity of making your own guitar from stuff at Home Depot. Amusing video, and an amazing project! I want to see you make a solid body guitar. I think it'd be fun, though you might need to buy pickups.
Haha this is so cool. I only started learning guitar 7 weeks ago and I'm documenting my entire learning journey on here so this was super motivational! Thanks so much for sharing it.
It's been two weeks. Is it still a guitar? This was fun. The difference between this guitar and something more like a "real" guitar is hundreds of dollars worth of wood. And a better understanding of what is going on. You should do this again!
Okay, that deserves a sub. I built a guitar out of a kitchen table leg and other miscellaneous stuff, so I definitely appreciate the ingenuity. Curious to see what the rest of your videos look like now.
My husband made his guitar too which he made a beautiful golden angelic guitar he designed and he played the most best romantic spanish song that I ever heard since last valentines day 2024 while he was wearing a tuxedo wearing with a red rose flower pin and other people looked at him smiling as they are cheering.
Lol... I like the authentic Gibson-style 2-piece neck and headstock! (as in broken and glued) You forgot the truss rod! Also, most people would put the solid wood on the top resonating surface and the plywood on the back.
It kinda reminds me of the guitar that the kid has in Coco - the best you can do with the basics. Just needs to nails as friction pegs so you have to tune it with a pair of pliers. Awesome. How many hours total did this take you?
that is amazing you made a playable guitar from all Home Depot materials, except the strings, but those were necessary to make the guitar play. I am sure guitar enthusiasts are kind of impressed.
for not being a guitar player that last clip of you playing guitar was really good. I work on guitars for my job and apart from how chaotic your execution was, your methods were pretty spot-on.
Some people don't realize the precision that is actually required to make a guitar. I commend your efforts good sir. That intonation hurts, but overall, it plays!
Asa pro shop, I thoroughly enjoyed your video. Best fun I’ve had in a while. Your persistence to continue irregardless of mistakes and challenges are commendable. Actually sounds better than some of the Asian guitars I’ve worked on! lol! You’ll be a pro in no time.
That's crazy. I get nervous having all the right tools and hardware to make a guitar but then this guy is just like "F-it Imma make the tuners and frets from scratch." nice commitment to the build.
Oh my god, every step he took could've been properly done if he just looked it up, but he stuck with stock knowledge and I'm all in for it even though I'm writhing in pain from the bad decisions absolute cinema, subscribed
I've done guitar repair and worked with a master luthier. I was laughing my ass off. But I was also quite impressed. The process was definitely unorthodox, and the materials hysterical. But I applaud the outcome. Very cool.
The first song I try to play on the guitar is "Spanish Romance," look it up if you have only hear My Chemical Romance, the original is pretty good. My dad played Green Sleeves.
Yes you did hear Battle Block Theater music and "the pen15 (eek!)" in this random RUclips video about making a Home Depot guitar
Ok :D
this is completely overengineered. If you really want to be resourceful, make a guitar out of wood you chopped down yourself. I made a guitar with nothing but cedar trees, a chainsaw, hatchet, a worn-out carving knife, and some old guitar parts, it's not hard, it just takes a little patience. All you need for an acoustic guitar body is some material to make a sort of chamber that reverberates sound.
The guitar body I made had all sorts of holes in it, but it still worked just fine, it was made entirely of soft wood, which is not ideal, but it still works just the same. The only improvement I could add is a threaded rod and bolts implanted in the neck so it can adjusted when it inevitably warps.
Instead of the traditional method of framing, I made it out of crossing half inch by half inch studs, similar to a house frame, then I used old roofing nails and glue to attach the studs, connecting the body with the frame. There are always cheaper alternatives that give it a unique look, which I personally appreciate over this copy paste. I get that making something of your own is admirable in some sense, but there are more practical ways to get the same effect.
Seems to me like a monumental waste of time and money from someone who doesn't know what they are doing, I don't mean for you to take offence, by your own admission, you're not that experienced woodworking. It's a skill that takes decades to master, I'm not even half decent at it myself.
5:00 the reason it breaks is because you are supposed to dampen the wood to make it more flexible, but more importantly, you probably didn't use the best wood for the job, not that you needed to. Everybody who does these kinds of diy projects always overspend on them, you don't need all these expensive tools and hours of precision crafting to make something everyone can enjoy
I think my main issue is that it costs like $75 for a decent used guitar online, you can't really make a business or do anything useful with this type of project, its just wasteful for the average viewer to attempt it on their own
@@garbagecan6969I'm not going to waste my time explaining to you why so much of what you said is silly, I will just simply point out that you have clearly missed the point of the video. I'm just here to make entertainment, and making a guitar out of obviously horrible materials is amusing to me, and apparently many others. Nothing deeper than that
@@Bebeau_Builds it wasn't entertaining
@@garbagecan6969"you're not that experienced at woodworking" because he didn't just make a solid guitar frame, doesn't matter if it's not complicated, that's good woodwork either way.
As a trained luthier I am both impressed and horrified.
This is the greatest compliment, thank you sir
As a trained luthier, now biuld a guitar with Home Depot suplies!
Hahahhaha same!
The bridge placment KILLED me... and I only play... lmaooo
That’s where I’m at and I’m not a luthier yet
Next challenge: building a drum set from only stuff found at Lowe's
A Thumping Bass Guitar
from
Löwe$
hozer, εh 🍺🦫
@@rustyaxelrod bruh how do you go from talking about building a guitar and building drums to talk about building an air conditioner next lmaooo
@@STSGuitar16 😁 Just being silly. That’s actually a Joe Rogan reference, borrowed from one of his stand-up routines.
@@rustyaxelrod oh, I see. That makes sense. No wonder I didn’t get it, I only listen to funny comedians 🤷🏻♂️
@@STSGuitar16 damm dude, no need to dis rogan like that
I built a Home Depot using only guitar supplies. A thousand of my generational descendants will now be in debt to Stewmac.
Real af bro
Underrated comment
Its actually quite incredible that most of the notes were playable without an excess of fret buzz considering you just made this with plywood. Cool video, earned a sub from me ;)
with an action that high what else would you expect lmao
I heard all kinds of nail buzz 😂
I can’t believe the metal strings held up and didn’t snap the neck without a tension rod. Impressive.
Acoustic guitars don’t have truss rods, so he actually built it somewhat correctly in that sense.
@@wonton4658Steel stringed acoustics require truss rods & X-Bracing to support the tension of steel strings, nylon or classical guitars don’t need a truss rod and just use ladder bracing (what was done to this guitar) because nylon strings don’t use nearly as much tension. So basically he built a classical guitar! If he keeps the steel strings on this one it will eventually pull itself apart sadly!
@@wonton4658 My steel string acoustic guitar definitely has a truss rod as all steel strings would..should!
@@leahkelsey3771 X bracing is only one style of pattern. Ladder and V bracing are also used. X bracing is just popular because it provides a more even sound. It's not inherently better (and in fact, I prefer ladder braced guitars because I think having a few strong frequency peaks imparts some character and beauty to the timbre). V braced guitars sound even more even, but they're a bit too dead on the trebles for my taste. Some V braced guitars I like, however. I think they need to be carefully voiced to not overdamp the trebles. I've noticed V braced guitars can actually be really clean across the frequency spectrum if they're voiced well, but otherwise sound a bit too dark.
Truss rods aren't structural per se. They're actually there to help bend the neck to the proper curvature, which you will need to do if you go to strings with a different tension. Wood doesn't stay still over time, it tends to distort. This can really be a problem if the neck doesn't distort straight, hence the need to use quartersawn wood on the neck is pretty dire. The wood is strong enough to handle the tension from the strings, which is only about 150 pounds on an acoustic guitar. You can often stand on a piece of hardwood that is as thick as a guitar neck, which is a substantially higher load that the strings impart.
Most failures occur at the base of the neck where the load is highest, or the headstock, where the wood is thinnest and is also undergoing more torque simultaneously.
@@wonton4658 I have never seen someone as confidently wrong as you
bro says he doesn't play guitar, proceeds to play blackbird
Plays better than me
Im glad someone else said it. Not only that, but homie could've used a pick, stummed some chords, but no, he doesn't "play guitar" as he proceeds to use 4 of the 5 fingers to play multiple finger style tunes, cause ya know "he just learned the tune for the sake of the video". I also don't know any single person that doesn't play guitar that wakes up and say "You know what, I'mgoing to make a guitar today."
The song is actually called romance its a classical Guitar Piece
Bro, this is actually really impressive. Anyone can build something to look like a guitar, but to build one that ACTUALLY plays is a whole different monster. Bravo sir, bravo
I'm actually curious about what you could do if you took a single guitar building course and then try again to build a guitar and see the results.
If he can make junk look and sound like that, I'd imagine a guitar built by him with knowledge, proper tools and proper materials would probably be a very well playing guitar. I am impressed.
I bet the end result would be a killer instrument but way less entertaining content lol. These guys are pretty good at playing dumb but the skills speak for themselves.
I was wondering this too. I've took one before, so my knowledge of building is a bit limited, but watching him just wing this build and it still somehow comes together was amazing.
Also, he put all that work into making a proper maple plank for the back, but then just uses plywood for the top, where the strings vibrate.
“Sorry for the awful guitar playing, I don’t know how to play guitar”
Proceeds to play the most beautiful guitar riff I’ve ever heard
kinda sounds like heaven and hell
Spanish song (that’s actually the name of it)
@razorracer3472 its spanish romance, or romanza
Well, I was expecting this to be a random guitar build that wouldn't be enjoyable, yet this was actually both funny and cool to see the guitar evolve from just random Home Depot wood to something that's actually playable. Well done!
This has been the most enjoyable guitar making video I've ever seen. I was grinning like a lunatic the whole way through!
Same and the sound effects and music they added made it even funnier lol
11:52 "this is definitely not the right way to do this"
Dude, that was the ONLY part you did normally 😂
Funny video! I’m completely amazed that it was somehow playable. Considering you have nails for frets, and no real tuning gears, I can’t believe it actually plays. Well done.
I don't know why, but I watched this whole video.
I can’t do it
For Make Guitar In One Day
"I don't play guitar"...*plays Blackbird*
This was fantastic, loved this!
Hi robby 😍
Jesus, not sure how this stumbles into my algorithm, but thank you. This is stupidly hilarious.
I was worried about the intonation of the fretboard but..... you nailed it.
Lmao
-"That's not very straight"
-"neither are you"
-"I'm about to take this wood to pound town" ...I see what he meant 😂
This guitar is the definition of “It worked?! It worked!!!” Subbed 🥳
For 2 guys having a few brews and messing around, hats off boys! I've been messing around building cigar box guitars and guitars out of canoe paddles etc. I laughed, i cringed and am impressed. Thanks gents
Having a homie help with a project and paying them with beer and vibes is so real
"I can't play guitar at all"
*Plays nearly perfect fingerstyle*
I would love to see a video of you taking that to a guitar tech.
This would be amazing. 😂
Alternative title: “Two Barstool Viewers Get Stoned Off Camera and Build A First Act Guitar On Camera”
Solid vid, boys.
Really good video man. Surprised this doesn't have more views.
I appreciate that, hopefully it will get more!
I have always wanted to build a guitar, so thank you for the confidence that I don't need to be well trained to make something vaguely guitar-ish!
This was way too entertaining. We need more _building random instruments out of random stuff_ content.
Is it weird that I'm disappointed that it came out so spectacular? I didn't think this was possible, absolutely impressive - bravo!
I bet if you put real tuners on it, it would be pretty acceptable. Nice work! It was like watching Beavis and Butthead build a guitar, but it worked somehow.
The gutair sounds really good
“It’s like the inverse of leg-lengthening surgery!”😂 I feel like there were a lot of great quotes in this video, but I think this was the best.
Also, I love that even though this video was pure chaos, I now know how to build a guitar. Will I ever build one? No, probably not…but I could🤙🏼
Love the new channel🙌🏻
Wow thank you so much
yeah I subscribed with these comments 2:56 & 3:57
Battle block theater music???? 5:30. Thats so sick i havnt heard that sound track in so long :D
I'm amazed the neck didnt either bend or break without a truss rod.
I build instruments, and some brand name guitars will bed to unplayable bows without a truss rod. Nylon string, sure but steel string tension is wicked as hell. You either got one lucky hard-ass piece of maple or some super light string gauge.
I think he said they were heavy gauge strings.
The truss rod being for reinforcement is a myth, it's only for adjustment. The OG Danelectros and Harmonys didn't have truss rods, they had a steel I-beam or square steel tube in the necks for actual reinforcement. 70 years later, and they're still straight necks. And those necks were made out of low-grade poplar.
The truss rod is more for adjustment. Over time that neck absolutely will bow until you can fire arrows from it. A metal insert of some kind would lend the guitar a ton of longevity but let's all be real, no one is playing that in two years, let alone 10.
It's for adjustment, but I've owned many old Kays and Harmonys and the like, and many with T-bars or single or double-reinforcement were bowed. And a beam won't stop a neck from twisting, ever. It's all in the wood and the care of the guitar. In my opinion. And I'm a twisted old man. @@irlikingpie
Fascinating how Pedro Pascal spends his free time
I actually really adore the ingenuity of making your own guitar from stuff at Home Depot. Amusing video, and an amazing project! I want to see you make a solid body guitar. I think it'd be fun, though you might need to buy pickups.
I too build guitars for a living, and this both warmed my heart and crushed my soul simultaneously haha!
Haha this is so cool. I only started learning guitar 7 weeks ago and I'm documenting my entire learning journey on here so this was super motivational! Thanks so much for sharing it.
Good luck to you man! We're on the same journey! Also find 8t funny in this video he says "I don't know how to play guitar" then plays a few songs
@@Kinobambino Thanks man! Hahah yeah that was funny 😂 I think we either underestimate our playing or overestimate it haha!
This was absolutely incredible. Funny, great editing, solid wood working skills, I couldn't stop watching. Keep it up! 👊
It's been two weeks. Is it still a guitar? This was fun. The difference between this guitar and something more like a "real" guitar is hundreds of dollars worth of wood. And a better understanding of what is going on. You should do this again!
And a truss rod, and the solid wood going on the the top and not on the back.
also a proper nut and some fret filing would make the guitar much more playable
that blackbird performance was strangely beautiful
Okay, that deserves a sub. I built a guitar out of a kitchen table leg and other miscellaneous stuff, so I definitely appreciate the ingenuity. Curious to see what the rest of your videos look like now.
It is rare to find a craftsman with humor.
Subscribed
Came for the build, stayed for the hilarious commentary
Very Cool! Any intonation issues are definitely more noticeable on any guitar when playing Blackbird
I love that you played Romance, very underrated song
How does this not have more views? Super entertaining and I’m impressed how much your guitar turned out to be an actual guitar.
This is actually veey impressive
Miguel from coco core
Innit
My 13-year-old daughter makes excellent guitars. She's been learning luthier work since she was eight. I have to remember to show her this video.
I made a guitar out of old Bee Hives, turned out really sweet..
😂
The corniness makes me laugh 😂
Yeah, what's the problem? ruclips.net/video/VXI9wVuJl7U/видео.html
My husband made his guitar too which he made a beautiful golden angelic guitar he designed and he played the most best romantic spanish song that I ever heard since last valentines day 2024 while he was wearing a tuxedo wearing with a red rose flower pin and other people looked at him smiling as they are cheering.
Lol... I like the authentic Gibson-style 2-piece neck and headstock! (as in broken and glued) You forgot the truss rod! Also, most people would put the solid wood on the top resonating surface and the plywood on the back.
"I dont play guitar" multiple times. Proceeds to play like someone who has 2 years of experience at minimum 😂
Love it! I love how you shortened the neck with a biscuit joint! Nails as bridge pins, brilliant!
Well done! The guitar but also the video... 18 minutes passed like 5 minutes👍
And beautiful house too
Wow that is the best compliment, thank you!
Great video! That blackbird ending was satisfying too👌
Would love to see how this would turn out with proper tuners, pins and frets….
The fact that you played blackbird at the end, made it a good ending to me. Loved this video ❤
3:02 hear me out..
You a lil freaky
Excellent work! If this is your first guitar, then imagine how good your 10th build will be. This video earned you a new subscriber.
It kinda reminds me of the guitar that the kid has in Coco - the best you can do with the basics. Just needs to nails as friction pegs so you have to tune it with a pair of pliers. Awesome. How many hours total did this take you?
This is one of the best RUclips vids I've ever watched tbh
0:30 skibidi toilet reference
Great fun lad! Now for the next challenge, build a fence using only woods and hardware from a guitar.
Hahaha that's the funniest shit I've heard in this comment section
All wood sucks. Same wood exists at Lowes. It all comes from Earth.
Well said
I never comment or like videos but this one just absolutely made my day. Hopefully this helps with the algorithm.
"Just like you, this piece of plywood is pretty ugly." You guys are killing it! You may (or may not) have earned my subscription.
that is amazing you made a playable guitar from all Home Depot materials, except the strings, but those were necessary to make the guitar play. I am sure guitar enthusiasts are kind of impressed.
for not being a guitar player that last clip of you playing guitar was really good. I work on guitars for my job and apart from how chaotic your execution was, your methods were pretty spot-on.
The biscuit join neck shorten process was amazing.
Good guitar playing, good guitar manufacturing!
I enjoyed your characters and the editing.
Dads reaction to look inside haha that was great man
That guitar was the aberration most amazing i never seen, thanks for sharing!
I can't believe that held together! Y'all are hilarious
I wasn't looking for this, but I'm glad I found it.
Thank you RUclips algorithm.
This is a drunk mess, very enjoyable.
This is super dope! but also I just wanna know what song you were playing during the comparison
Thank you! I was trying to play Spanish Romance
Sounds a lot better than I thought it would, good job ... you maniac
You give me William Osman vibes. I'm here for it
Nice build and nice playing 100%
I absolutely loved how he started playing Romance and I was like wtf is that MCR on this video RUclips recommended to me 😂props!
Dang why only 10k views? This needs millions.
Tricking your friends to help you with your project by buying them beer is indeed the oldest trick in the book.
Some people don't realize the precision that is actually required to make a guitar. I commend your efforts good sir. That intonation hurts, but overall, it plays!
Asa pro shop, I thoroughly enjoyed your video. Best fun I’ve had in a while. Your persistence to continue irregardless of mistakes and challenges are commendable. Actually sounds better than some of the Asian guitars I’ve worked on! lol! You’ll be a pro in no time.
That's crazy. I get nervous having all the right tools and hardware to make a guitar but then this guy is just like "F-it Imma make the tuners and frets from scratch." nice commitment to the build.
Oh my god, every step he took could've been properly done if he just looked it up, but he stuck with stock knowledge and I'm all in for it even though I'm writhing in pain from the bad decisions
absolute cinema, subscribed
Why did that intro song have the ojousama laugh lol
"I can't play guitar so".... Continues to play better than most self described guitarists. Cool project! Thanks for sharing
I've done guitar repair and worked with a master luthier. I was laughing my ass off. But I was also quite impressed. The process was definitely unorthodox, and the materials hysterical. But I applaud the outcome. Very cool.
The battleblock theatre music in the background >>>>>>>
That guitar turned out pretty darn nice!
Thanks for sharing.
This is such a cool and funny video for how many views it has, you deserve to have more views! I love your editing style to
a good craftsman never blames the tools
bruh i thought you had 1mil subscribers when i glanced cause the quality and funny is top tier. 10/10 for these Mans
Ya’ll are actually really good at this
I bet a slide would work perfectly with this thing. Great video!
i love 1am youtube. great channel, y’all make me laugh