This is the only video I could find that CLEARLY details how to install those pads. The most annoying part was the proper orientation of the clip and the placing of the pad in front of the tab. Nice job!
took me two days of seaching for how to put the brake pads back in could not find any until I found this video took me 5 mins to put it back in. THANKS SO MUCH YOU SAVED MY MENTAL!!!!!!
thanks! i spent over an hour last night trying to re-asemble a rear brake on my non-kawasaki - the design is different but the same idea is used, after watching your video i put it back together in 5 minutes!
Good information. Our rear caliper did not have springs for the the outside pad so I took a spring and made a pair. Now I now why the outside pad was completely worn down to the metal. The break's work much better. Thank you
Great video man exactly what I needed ,I just got me a 150cc Apollo pit bike I'll be uploading videos and stuff too. But first I need my brakes! Lol keep up the good work
Hi I have a the same caliper pads etc except it's for the front but everything else is the very same I'm having difficulty with the smaller pad falling out when the piston puts pressure on it pushing it out of the grooves, does your smaller pad clip into anything i have the small steel clip in place but it doesn't seem to hold the smaller pad in place any ideas thanks
I have no idea, the pads dont clip into anything, at first before i knew how to assemble the rear brakes i though i had a piece missing maybe something that clips just like you say but no. So, i really don’t know how to help you i sorry! :( I hope you find out!
Hi Nick here from SA, great video firstly. My sons quad has the exact same rear braking system but it has a hand brake ( cable that runs from the lever down to the calliper) could I send you some images and perhaps you could help put this 3D puzzle back together. Thank you
My clip is slightly different, been racking my brains why the hell its been squeeling like a bitch, the clip on mine is bent out of shape a bit, I gotta fix that, thanks man!!! (Saved my ass here, I don't have the springs on mine either, I might add them too)
This is the only video I could find that CLEARLY details how to install those pads. The most annoying part was the proper orientation of the clip and the placing of the pad in front of the tab. Nice job!
The best video on RUclips about hidráulic break’s
took me two days of seaching for how to put the brake pads back in could not find any until I found this video took me 5 mins to put it back in. THANKS SO MUCH YOU SAVED MY MENTAL!!!!!!
thanks! i spent over an hour last night trying to re-asemble a rear brake on my non-kawasaki - the design is different but the same idea is used, after watching your video i put it back together in 5 minutes!
The soundtrack has me vibing while learning🤙😂
Thank you so much , i couldnt figure out how the spring goes in there😂
Good information. Our rear caliper did not have springs for the the outside pad so I took a spring and made a pair. Now I now why the outside pad was completely worn down to the metal. The break's work much better. Thank you
thanks 🙏
Hey- mine didn't come with them either, I mean WTF?. Thanks for the heads up.
SAME! Now I know why my brake was rubbing so bad on the disc. Do you have measurements on that spring?
Thanks for the video! It was causing me some stress fitting my pads! Lol
Your welcome
keep doing this amazing type of videos bro! you are lit
SURE!!
Thanks BRO!!
May be in this week im going to be uploading a new video installing the chain.
NICE VID DUDE, THX I HAVE BEEN LOOKING FOR A VIDEO LIKE THIS, REALY THX!!
No prob BRO!!
Best video I've seen on here, where can I get the master cylinder and brakes from for a x motos , can't find a match anywhere?
Thanks you for making it simple for dummies like me
Great video man exactly what I needed ,I just got me a 150cc Apollo pit bike I'll be uploading videos and stuff too. But first I need my brakes! Lol keep up the good work
High-key me same here^^ 👌🏾👌🏾👌🏾
Your Welcome
Good video man detailed and easy Thank you
Your welcome
Dude! This video is amazing! Thank you for posting this!!!!
You’re welcome 🙏
How do you take it apart? Ive been trying to take it apart so i can take the big brake pad out
Thank you. That little metal clip was driving me fucking nuts! Could not figure out the orientation. Thank you thank you!!!!
You just saved my ass. Thanks!
You’re welcome hahaha
Thank you very much for this video ! It helped me like hell ! A+++
Hi I have a the same caliper pads etc except it's for the front but everything else is the very same I'm having difficulty with the smaller pad falling out when the piston puts pressure on it pushing it out of the grooves, does your smaller pad clip into anything i have the small steel clip in place but it doesn't seem to hold the smaller pad in place any ideas thanks
I have no idea, the pads dont clip into anything, at first before i knew how to assemble the rear brakes i though i had a piece missing maybe something that clips just like you say but no.
So, i really don’t know how to help you i sorry! :(
I hope you find out!
Thanks! We've spend an hour on changing brake pads and we had turned the spring the wrong way
Thank You...
Thanks man! I have the exact same rear caliper, but it didn't come with the two springs to hold the longer pad in place, wtf!
not all heroes wear capes
Your are right hahaha
Perfecto work thank you
Hi Nick here from SA, great video firstly. My sons quad has the exact same rear braking system but it has a hand brake ( cable that runs from the lever down to the calliper) could I send you some images and perhaps you could help put this 3D puzzle back together. Thank you
Rugó nincs a fékbetéten az hiba?
What pit bike is it.
I have the same caliper
Cheers
GRF 90
Mate thank you very much
You know where I can find those break pads
Im sorry but i don’t know...
Where do you get SSR 110CC rear caliper..
Thanks!
Your welcome
What actually keeps the inner brake pad from falling out?, mine did,
Same
tnx brooo
ahh, so i am missing something from the assemble. Mine never came with the return springs. Email sent to supplier. Thanks for the vid
2nd how to add lubrication for bedt j
familurias best production aanbest l
Hi I have a 125 cc dirt master and it needs front and back breaks can you please recommend me some thanks
Aamir Ali I bought the originals, where i bought it
Where did you get that caliper from ?
From the bike.....it the original one.
ty
Your welcome
Its much easier if you install the axle from left side first.....😁😁😁
Mines hard as hell to do from the left 😂
hahaha
wht size u use to take off the bk axel
16mm or 17mm socket :)
My clip is slightly different, been racking my brains why the hell its been squeeling like a bitch, the clip on mine is bent out of shape a bit, I gotta fix that, thanks man!!! (Saved my ass here, I don't have the springs on mine either, I might add them too)
Brake pads are now contaminated from wd40 just saying
True
What song is the intro?
Cant remember, but here you have the channel that created that song DJ QUADS.
Mines is thumpstar
Lol good video but why not just talk
Thanks, is a future plan hahah.
That music is annoying
Thanks for the advise.
Music was to bad to even watch
Get rid of the crap music and actually talk and you will get more subs. Everything else was good.
Haha thanks for the advise