2022 WRX Perrin Shifter Stop Install

Поделиться
HTML-код
  • Опубликовано: 2 авг 2024
  • Today Ernie will be installing a Perrin Shift Stop on the new WRX! The new WRX unfortunately suffers from the same shift slop that the outgoing one suffered from as well.. Luckily there's a cheap and easy option to address it!
    Enter the Shift Stop.
    Perrin Shift Stop:
    www.rallysportdirect.com/part...
    Follow our Socials :
    Facebook: / rallysportdirect
    Instagram: rallysportd...
  • Авто/МотоАвто/Мото

Комментарии • 39

  • @wackz21
    @wackz21 Год назад +2

    Just installed mine today. It's a must simple mod. 👌
    Tooked my time to really make sure it goes in gear and not a lot of slop.

  • @TheRicardoMilos
    @TheRicardoMilos 2 года назад +1

    Another BANGER Ernie! Keep up the good work!

  • @o0oCircleso0o
    @o0oCircleso0o 2 года назад

    Love the content this channel provides! Always my go to for installs on my ‘22.

  • @DangerMouseG
    @DangerMouseG 2 года назад +2

    Very informative. Thank you

  • @jerryvolpini7987
    @jerryvolpini7987 Год назад +1

    Before you add the Perrin stop, put a drop or two of light oil between it and the stock limiter. Then, when you adjust one, the other doesn't move. Cool video, I like that you showed it took a couple of tries to get it right. 👍

  • @NicholasApplegate
    @NicholasApplegate Год назад +2

    ordered, watched this video 2x, installed: PROFIT(ted)
    WOW, 1-2 is so nice and clean now! i took out even more slop than shown. feels so good!! this is my first modification and its worth every penny. fast shpping too. i ordered the brass busing as well, but will wait till its warmer to mess with that. but honestly this shifter in my VB is tight all around now... i'm not sure i'll need it. this is how it should have come from the factory!

    • @theredsalmon612
      @theredsalmon612 8 месяцев назад

      Do you ever have trouble getting into 1st? I get this really unsatisfying resistance going into 1st. Even been locked out of 1st a couple times

  • @1jiveturkey1
    @1jiveturkey1 2 года назад +1

    Good job Ernest.

  • @TruckerSteve182
    @TruckerSteve182 2 года назад +2

    press the clutch when the car is stopped and it will let you into any gear. works on mine.

  • @Jpee123
    @Jpee123 Год назад +1

    I have the same car, my stop is coming in today, but my question is can you use the dash counter on the dash at the same time to see if it is going into gear?? While you are feeling out the shifter?

  • @Young_Bourdain
    @Young_Bourdain Год назад

    When I test drove a 22 5th gear was weird to get into. It almost doesn’t seem like it’s far enough up to the right… the feeling was too close to 3rd IMO. I’ll get used to it though

  • @YourRiceInMyBeans
    @YourRiceInMyBeans Год назад

    Will the linked shifter stop work with the factory installed short shifter?

  • @2023startingCA
    @2023startingCA 11 месяцев назад

    will the screw loose later on? cause it's frequetly shifting everyday...

  • @andrewtsousis3130
    @andrewtsousis3130 Месяц назад

    I noticed you didn’t install the washers on the side nuts, I didn’t either, the instructions say to do this? What are they for, do we need to do that?

  • @GenZBiker
    @GenZBiker Год назад +1

    How come you didn’t use the washers that came with it?

    • @wackz21
      @wackz21 Год назад

      Is the washer important? I haven't installed mine..

    • @dogecrypt0
      @dogecrypt0 Год назад

      @@wackz21 it seems Fine but i wanna is it important or naw lol cause I just installed mine n i dont got a 7mm

  • @adampurslow8994
    @adampurslow8994 2 года назад +1

    Link says I does not fit my veh..2022 wrx base.. might want to update compatibility..

    • @johnb382s
      @johnb382s 2 года назад

      It will fit.

    • @rallysportdirect
      @rallysportdirect  2 года назад

      Updated the compatibility, thanks for pointing it out!

  • @MissPinaii
    @MissPinaii Год назад

    What about 5th?!

  • @JoseGarcia-ec8yd
    @JoseGarcia-ec8yd 2 года назад

    Why didn’t the car let u go into 5th ? If I may ask my car does that to sometimes and I am new to manual cars

    • @rallysportdirect
      @rallysportdirect  2 года назад +1

      when its off sometime the the teeth on the gears could be misaligned, in our case we started the car moved it a foot and it went in fine :)

    • @JoseGarcia-ec8yd
      @JoseGarcia-ec8yd 2 года назад

      @@rallysportdirect my car does it sometimes when even on and it’s mainly 2nd and 6 but u saying it’s normal right ?

  • @michelled8420
    @michelled8420 Год назад

    This doesn’t void any warranty does it?

  • @marksantiago7259
    @marksantiago7259 Год назад +1

    So just forget about 5th gear?? Lol u better redo it again!!

  • @matheusgiovannini571
    @matheusgiovannini571 Год назад

    Don’t buy Perrin’s. Cobb’s solution is much better, it has the same shape as the OEM reverse lockout, it’s not metal so it won’t score your shifter as much and it allows you to adjust the reverse lockout (for 5th and 6th) separately

  • @dinonerd1663
    @dinonerd1663 2 года назад

    I may or may not have dropped my Alan key doing this..🤦‍♂️

  • @atweber
    @atweber 2 года назад +1

    Sti short throw shifter doesn’t include the shift knob silly. I know because I have that option.

    • @DylanVBWRX
      @DylanVBWRX 2 года назад

      Same, might need to add a shift stop.

    • @rallysportdirect
      @rallysportdirect  2 года назад +1

      Interesting, on our build sheet it's listed as if it falls under the option

    • @hater1092
      @hater1092 2 года назад +1

      Sti short shifter package does or at least that’s what I have seen on the paper say at the dealership

    • @DylanVBWRX
      @DylanVBWRX 2 года назад

      @@hater1092 no, my 22 WRX has the sti short shifter regular knob. Also if you go to build one accessories sti shift knob $185 and sti short shifter $427

    • @hater1092
      @hater1092 2 года назад

      @@DylanVBWRX 👍

  • @johnb382s
    @johnb382s 2 года назад +1

    So no 5th gear? Lol

    • @rallysportdirect
      @rallysportdirect  2 года назад +1

      We rolled the car a foot and it went in fine, guessing the teeth were aligned weird