Installing a Tile Roof , this video explains step by step how to do it ,fix roofs, stop water leaks.
HTML-код
- Опубликовано: 18 мар 2017
- I took this videos and put them together through the installation of this light weight concrete tile, ( Boral Flat tile , weights less than 600 Lbs. per square ) Hope you like this video and if you like it , share it with the world , so far , I think this is my best video about a tile roof.
I appreciate the workmanship and dedication to your craft. You are teaching your audience to spot quality.
Thank you Eric for sharing this with us. Much appreciated. I'm a young cost estimator and this has been super helpful for me.
I have a end angled concrete tile that is shattered broken Where do I find concrete tile replacements In AZ
I would recommend a synthetic roof underlayment instead of roofing felt. Most of your leaks will come from the felt failing. Nice video!
He’s screwing this thing up he is not giving the customer a good roof you cannot use felt and peel and stick in the valleys they should be either a TPO or my opinion should be sheet metal custom fabricated, Yes you’re right synthetic on the roof do you layers of 30 is garbage
Thank for suggesting synthetic roof underlayment.
@@davidfaria6194no if the 30# is two played.
I'm doing my first tile roof tomorrow i feel this video has well prepared me thanks
Thanks for sharing your knowledge. Blessings to you and your family!
Great video! I like how you’re bending the valley metal and pipe jack flashings back 3/4” on both sides of each vertical runs. Smart thinking. 👏👏👍
That valley metal is garbage for tile is better to use 5 crown valley metals
Hello there Eric; My name is Josue Diaz. I am an architect in California (Roseville). I really liked this video. Great job. Sigue adelante y gracias por compartir.
Great Video. Tile Roof is a complicated skill. Thanks for sharing! I'm going to try to fix my mother-in-law's roof. Roof was "re-roofed" by a contractor...by-removing Flat concrete tiles (Monier Homestead)... removing battens/felt/valleys. Pro-Armor underlayment was used (stapled down). Flashing around skylights was done wrong (old flashing was re-used) and immediately leaked into the house. Contractor placed large tarp over both skylights, extending to the ridge 9 months ago...and has not returned to repair. I need to fix the leaks before the rainy season and get rid of the tarps. Also, contractore didn't use a drip edge or anti-ponding of any sort used at the edges of the roof, so, lots of water runs behind Fascia. I plan on removing tiles around the skylights and seal/flash the best I can. I was wondering if you have any recommendations on flashing around skylights (4 feet x 4 feet), and what to do about lack of any drip-edge or anti ponding around entire roof edge?
Just got a roofing job and thanks to your channel I'm getting some info in before I start...
What?? You got a roofing job you don't know how to do? How did that job work out?
Thanks for the video very helpful
Thanks for posting this video, super helpful.
I like your videos, cause you try to be clear and do easy explanation, I just to do roofing for almost 27 years in California now I am temporary disability cause I have a meniscus knee problems
Muchas gracias Eric hay personas que no les gusta compartir las ideas de su trabajo pero tú eres un buen trabajador una buena persona y e aprendido mucho de ti los que dicen que no quieren enseñar son muy envidiosos y las personas que comparten El Talento son personas buenas y así Jesús compartía todo lo que él sabía Y tú eres una buena persona Síguele camarada me gusta cómo trabajas y nos das una lección que Dios te bendiga
Excelente trabajo mi estimado
Sin duda eres el mejor
That sky light is super sweet .
Again appreciate sharing. We want to be smart home owners and avoid any issue and tricks by contractors too.
Thank you Eric for sharing just what I was looking for
In Florida here, after hurricane Michael in 2018, we saw some tile roofs survive and others fail. The ones that survived had two nails in each shingle. The ones that failed had only one nail in each shingle. A stone shingle moving 150 mph is a dangerous projectile to all property nearby. Stone shingles were like missiles blowing through peoples doors, windows, walls, etc. I would suggest going to the added time and expense to add one more nail to each shingle.
Hard to take you seriously when you referred to tiles as “shingles” about 10 different times. Shingles are an asphalt-based product with completely different installations than tiles.
Also hurricane level winds are going to destroy tile roofs regardless of wind speed. Quality products and installation only takes you so far when you start talking about 100+ mph winds
@@josht5453 I'm sure that regardless of what you call them, the manufacturer's specifications are for a fastener in each hole. And the houses on the same street in the same hurricane all faired differently depending on the installation of the roof materials. Don't make excuses because everyone knows that contractors take shortcuts and do crappy work quite often.
It's California here, with all the warning of the worst in 85years, Hilary finally arrived at 7-14mph. But yeah, this is why I do my own roof.
That IS a good video. Same material as mine. My roofer never came back to do the last 2 courses and the ridge. So now I can do it myself (I have done wood shake before)
They put shitty material on your roof. This is dirt cheap material
Why what's the difference?@@bluemelon7818
Beautiful
Love the video
Que buen trabajo se avienta muy detallista y gracias por querer enseñarnos. Yo compre una casa foreclosure que tiene un techo como teja pero de metal y se ve bien mal la instalación estoy pensando poner algo así como lo hizo usted. Ojalá me pudiera ayudar con información. Mil gracias
I recommend and larger gap in the tiles that meet in the valley pan.
Looks great
Asen falta mas maestros Como tu.
I like Eric Garcia tile roof installation with a full plywood base over the entire roof as support for the tiles.
yo soy de san juan Capistrano.. saludos y como siempre te la rifas
J Tapia ...gracias!
hey eric, great video! Had a question about asphalt shingles, how do you get the first row of shingles so straight when you do them? I hear some people saying they'll use a chalk line, others say that the chalk is not good because it can be misjudged if the roof is somewhat off. Whats your method? upload a video if you have the time. thanks again
For the first row the chalk line is the best way
buenos videos gracias
Mr. Concealer , how much you charge per square foot $ for this job?
Is there box gutters, tin work in cali! My office is in Ohio and ky and it's cool how different locations have different materials, I love doing skate, tile and asbestos but around here there isn't many left! Everyone always takes them off, I hate to see them remove them! People don't understand you can do a pick up and relay and like new!!
Closed valleys leak. Open valleys allow water and debris to flow more freely. Except for slid-down, or broken tile, debris gets trapped and builds up, causing water to run along the top of the tile causing 95% of valley failures. Not an opinion here, just an observation.
I folded the edge of the valleys about 1 inch to elevate the tiles over the valley and allow the water to run under the tiles. I do many tile repairs on the raining season and this idea has been giving me good results
Yeah I do closed valley and never had an issue . I actually clean out a lot of open valleys that get a lot of debris in it especially if there are trees around
I've done work in that same area of of Pico aliso.
Thank you.
Thank You! I have to reroof my house as I think it just has a single layer of 30. I have lots of leaks. My concrete tile looks just like the ones used in this video. I am going to remove 1/2 the tiles, repaper with two layers of 30 and then replace the tiles. My edges have nothing except the paper over the edge of the roof and then the tile on top. Isn't there supposed to be steel on the edge???
For broken tiles I need to cut at my valleys, what type of blade do I put in my Skill Saw?
Thank you so much for this video. I can not afford to pay someone and must do myself.
Install new edge metal over the edge of the roof. Then install 2 layers of 30lbs felt ...install eave riser metal before installing the tiles. Use a regular skill saw ...install a diamond blade to cut the tiles...its also called dry cut diamond blade
great work as always eric saludos Flores Roofing Service
Juan Flores ....thank you Roofer! greetings
Roofing Solutions By Eric Garcia went u have time check my instergram joseflores8630 i have some videos
Juan Flores ..i will, keep up the good work !
you need a layer of peel and stick for your tile not to crash your 30 come to Florida and get more knowledge about roofing you making us look bad...cheap roof and your details are suck I wouldn't you with my roof
orlin rivera put some videos mija
Why you guys didn’t buildup the crickets behind the chimneys like you said . In Colorado if you don’t have them behind chimneys wider then 30in , you fail inspection. Is it different in California?
What would your typical warranty period be for a re-roof of clay tile 30 yr old roof?
Great video man, I have a roof tile that's lasted 20 years and I was asking if titles can be reused for a new roof??
How long did that roof take? It looks complex. How many squares? I like your work.
What is the standard practice for grouting/sealing tile roofs?
Tengo una pregunta
Ese trabajo para cuantos días es?
Saludos mi estimado
Hey Eric!! As always, great and informative videos. Representing and always professional. If you're ever in Orange come visit at Elite Roofing Supply! As an inside sales associate, I learn so much from your videos and I apply that knowledge when helping homeowners. Thanks!
Hey compa how can i get ur info
We need a good roofer
Estoy en los ángeles great job
Do I need to reinforce my roof wood to put tile roofing? I have shingles right now, and I would like to upgrade to tile. Good job tho!!
No. You dont.
@@zephyrguzman6462 bro tile is heavier so YES it's better to reinforce it
Please make a step by step video on flat roof tiles. Details from first course and to last course..thanks
Whats more common in that area. Concrete tile or clay tile?
great work eric . did you go over shingles on the area were the solar panels were
darren harlow ...yes sir, i did
I have similar roof tile like video, but find the replacement is a challenge.
can you let me know the roof tile name and model? Also, where to find this roof tile?
Thanks
Ese material se corta con grinder o skillsaw??
I have similar tile as in the video; however, how come mine has a long piece of small of wood to hold the tiles and yours don't. Is it depends on the type of roof?
The wood is called wood batten.. It's used to hold the tiles in place when the house is steeper than 5/12... If your house is less that 5/12 ...you don't need them.
@@Garciasroofing Thank you so much for your explanation. 👍
I believe code is two nails or one screw. I don't understand why roofers even use 30lb felt when there are so many better underlayments. Such as TU43, TileSeal self adhering base with 30 year warranty. If you give people the option they will usually chose the better base sheet.
How much do you charge per sq, minus the cost of tile?
Why didnt use either BATTENS to screw the tiles rather than screwing directly to the deck? Have you use foam cement any where ??
just love the work learn a lot from watching your videos roofer from sask. can.
Does that not bother you when people park the car under the work area?
I live in Moreno Valley California, do you do tile roofs in this area? Kiero hacer un tile roof para un shed ke estoy construyendo. Estilo japonés son los tiles.
Should do a quarter bond instead of a half. The finish looks a lot nicer.
Eric todo tu jale esta vien echo mis respetos lo q estas mal eske digas q les vas a enseñar cómo se ase a los mexicanos todo t sale vien no t vallas a kemar nomas x unas tontas palabras t lo digo x experiencia ten cuidado cuídate q dios t bendiga
Vicente Lopez ...jajajaja me dijo el Chapin k lo dijera
Salúdame al chapin dile q son el numero uno para el roof
si , le dire , gracias !
Que sensibles! le van a enseñar al muchacho de México porque el aún está aprendiendo el proceso y va ha aprender de alguien especial que si comparte sus conocimientos. Luego luego sacan lo ardido que estan.
8:21 with the metal lips up like that would it push the tiles upward?
what kind of mortar do you use?
Are you doing any work in Bonita CA??
weres in your company located at
Sorry to bother but I have a balcony on top of my master bedroom. There is a door to that balcony and ir always leaks down into the bedroom what kind of flashing can I use I’m going to replace the complete roof. Thanks
You need to remove the door flench on the bottom of the door . before installing any new metal , install 1 layer of self adhere membrane over the exposed wood. Then get a 4x4 L metal and install it to the length of the door . the metal that goes over where the metal flench was fold it inside the door. Then install the metal flench back and make sure to seal any penetration with clear caulking. Attach the new roof to the bottom flench of your 4x4 metal
@@Garciasroofing
Thank you so much for your help I know you don’t have to help me but that’s great information you provided
Mucha terapia guey
Very good are you looking for a good worker because it just happens to be I'm looking for a good job lol
Do you put hip caps in the valley?
please don't do it
Why k not
Why are those tiles sitting all out of place on top of the vent on 22:37 , something went wrong with the measurements of the tile rows
14:52 woopsie, the rows of tiles don't line up at the valley
Exactly this guys thinks that he knows a lot about roofing but he makes so many mistakes lol
Tienes videos en español
you are a apprentice at best, but at least you are trying
The tiles are too close to the valley center water won't drain correctly.
Thank you for the video. But, I think you skipped and did not show a lot of critical, skillful steps. One minor detail, why choose gray tiles for a brown painted house? Gray doesn't go with brown, to me.
1:42 ¡ Mexicanos! Les vamos a enseñar como los hacemos Los Chapines! 😁😀. Si wey..
No sabe mucho hay muchos detalles que le falta conocimiento puedes tener años trabajando en techos pero muchos lo siguen haciendo mal lol
The owner should have moved his F-Type away from the roof while work is being done 🙂
No batten boards 🤦🏻♂️🤦🏻♂️
That roof is a leak waiting to happen with the valleys it has
Y por que no uso 5 crown Valley metal ?? 😂😂 y esa teja va a 3/4 no a la 1/2 que no ve que las rayas de la teja quedas alineadas 15:10 😂😂😂
You gotta put the chingadera on the side.
This is what happens when you hire poor skilled workers and owners that learn from other poorly skilled workers . No battens no, messed up valleys, and no rubber flashing over hips good luck
Lawrence, I went to look for your channel to find roofing videos and could not find any. Please share your video with the batten/valley/rubber flashing techniques.
@@eschrader Lawrence is right this guy is making mistakes on his videos that valley metal is not the best for tile roofs specially on low slopes he needs to use 5 crown valley metals and what the point of using double felt if his making hole on the felt because he's not using the wooden battens 🤦♂️
One cracked tile and it's a big strainer, direct to deck is no good. So sad
Eric, get to the point brother, you talk to much...
I note you use the cheap plastic nail caps, that deteriorate rather quickly, as apposed to the full galvanized steel nail caps. Better to not cheap out on such a small thing. You wind up spending dollars, when you try to save pennies...No bueno.
I stopped watching after seeing that. 🤷🏼♂️
Really roofer? Do you know what's the purpose of the cap nails? Do you know why they are made of plastic?
It seems you don't fully understand the purpose of the cap nails..anyways Im not here to argue with you...rather I'll tell you after tou install the products on the roof...the nails are useless...the tiles hold the felt in place by applying pressure over the felt and the fastener of the tiles do that too...when you do shingles is the same thing.. The coil nails do the same thing to the felt...you dont need a million dollar to hold the felt in place...you only need it to hold it while you install the materials...read you local codes...unless you are in Florida then use round metal fasteners to hold the felt.
Thank for the comment.
You are hit and miss. Some things you do great, and other things you are way off. Your tile install is great, but you used the wrong underlayment. Just saying. You used asphalt shingle underlayment for tile. Or is your rich customer a cheap ass and wanted the cheapest price possible so you used an inferior product.