Wassup rusty, I haven’t been around much but i watched all you otr series before I became a driver almost 2 years ago now. After my first year I went and got myself a truck. I’m flat bedding now. This video will be exactly what I would be looking for some time down the road. I stay away from labor rates on maintenance lol
Rusty, what about putting some vinyl stripes on the trailer to cover the scrap it's not that expensive and covers up the ugly marks. Take care and stay safe.
My dad started out as a machinist and worked his way into estimating the cost of the work to make a profit and keep the customers happy. I swear dad's are great, they can usually do anything. Your dad was probably thinking, put the damn camera down and quit wasting time. You could probably make more money as a mechanic and repairing stuff, then driving.
@@TheRustyCracker i hope and follow Since you drove in snowy condition and blizzard or heavy rain and poor visibility too, it is good to install red strong fog light with old 21w bulb(not led) to not get frozen and good visibility from behind
I'm not that experienced, but in my experience the flakes you saw is just dirt that entered and was ground and natural unpreventable metal wear and the brown is just older oil and/or mixed oils.
The friction surface of the brake drum and the brake friction material are contaminated by oil or grease. (393.47(a)). That means it’s an out of service violation by the FMCSA. Pull into a scale and let them find those brake shoes contaminated with oil and they will ticket you for it
If the tire inflation hoses are leaking inside the hub can it pressurise the hub and push oil past the rear seal, maybe that is the first thing to check, I dislike them systems
Once the brake shoes/liners have been contaminated with oil/grease they need changing ,cleaning the shoes/liners is no good as soon as the shoes/ liners get hot the grease/oil will come out reducing the friction with the drum
@@ky.gambler5281 Nah, i will try and explain ,oil and grease soak into the lining material , and every time the brakes are applied this causes heat,so the soaked in oil seeps out seducing the friction , the only cheat would be to replicate this by using a blow torch to heat the linings then clean off the liner until there is no more oil coming out , this has its problems as it makes the rivets brittle.
“A loose bearing is a happy bearing” is what I was taught. Not literally loose, basically that over tightening will burn them up. It’s all by feel. I don’t know how these internet keyboard warriors would ever be able do it, they need a torque spec for everything.
what kind of seal do you use...Gray seal Harp seal Northern elephant seal Hawaiian monk seal Harbor seal Northern fur seal Guadalupe fur seal Weddell seal Antarctic fur seal Leopard seal Australian sea lion Galápagos fur seal Ringed seal Baikal seal Caspian seal Walrus
What he was doing here isn't dangerous, if it was loaded it would be a different story. I've changed these seals for 44 years without a jack stand, but used bottle jacks. It will only drop about 4 inches if the jack fails..
Your wrong he did a good job he mentioned torquing the wheel nuts Iv'e seen so called mechanics that did not do that, an owner operator that won't do some basic repairs is one that will probably fail.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Who els will do this by themselves to save $300?
Not menu I know that
If I can make it home with it or catch it early hell yeah. I would have replaced to shoes though...they ain't expensive.
I definitely would
I’m a diesel mechanic and wow I’ll see you in a shop soon
Wassup rusty, I haven’t been around much but i watched all you otr series before I became a driver almost 2 years ago now. After my first year I went and got myself a truck. I’m flat bedding now. This video will be exactly what I would be looking for some time down the road. I stay away from labor rates on maintenance lol
Proper seal job :)
I get you with the heat, Im in a winter wonder land and we got 25C right now, its getting to me. Haha
You have a great chanel kept it I will allways wacth
Thank you
Rusty, what about putting some vinyl stripes on the trailer to cover the scrap it's not that expensive and covers up the ugly marks. Take care and stay safe.
I was thinking something like that or a funny meme like “T Rex Did This “ idk
My dad started out as a machinist and worked his way into estimating the cost of the work to make a profit and keep the customers happy. I swear dad's are great, they can usually do anything. Your dad was probably thinking, put the damn camera down and quit wasting time. You could probably make more money as a mechanic and repairing stuff, then driving.
😂 true
Great video, -very similar to cars and small trailers! Now I know. thanks Norm
Dang right we're watching till the end!
❤
Hi
Please install orang turn signal and som light in side trailer at the end
Maybe one day
@@TheRustyCracker i hope and follow
Since you drove in snowy condition and blizzard or heavy rain and poor visibility too, it is good to install red strong fog light with old 21w bulb(not led) to not get frozen and good visibility from behind
Good video. I enjoy watching your videos
Glad you like them!
Can you post the tools need to remove the large nut? What size ? Thanks
As usual your boy from Kenya
Lucas is king though. I had a busted wheel seal not too long ago, all the oil came out and if I didn’t use Lucas I could’ve lost my bearings.
nice job rusty
Thanks 👍
Thanks bro 😎
good work bro🙂
The synthetic grease works much better than gear oil in the bearings..
Rusty, Kool video for sure, your Dad is a Kool pop.
Looking forward to new content.
He said thank you
I'm not that experienced, but in my experience the flakes you saw is just dirt that entered and was ground and natural unpreventable metal wear and the brown is just older oil and/or mixed oils.
Hey what’s up bro how are you much love
Good you?
The friction surface of the brake drum and the brake friction material are contaminated by oil or grease. (393.47(a)). That means it’s an out of service violation by the FMCSA. Pull into a scale and let them find those brake shoes contaminated with oil and they will ticket you for it
What is more important money or safety...🤔🤔
Money
@@TheRustyCracker you ARE a jerkoff
If the tire inflation hoses are leaking inside the hub can it pressurise the hub and push oil past the rear seal, maybe that is the first thing to check, I dislike them systems
SKF the best you can get. Swedish quality 🇸🇪
Tool cost is the major thing on this
Nice video if i was you chang all 4 axle seal save big money and time on the road some drivers prefer grease axle much safer on the road
Thank you
@@TheRustyCracker you are welcome anytime
Vnl trucks a al barsha 3
Once the brake shoes/liners have been contaminated with oil/grease they need changing ,cleaning the shoes/liners is no good as soon as the shoes/ liners get hot the grease/oil will come out reducing the friction with the drum
Nah..,,
@@TheRustyCracker Nah is not the correct answer
@@Richiecorner65 if so it will burn off within 5 miles.. his shoes barely had any oil on the edge.
@@ky.gambler5281 Nah, i will try and explain ,oil and grease soak into the lining material , and every time the brakes are applied this causes heat,so the soaked in oil seeps out seducing the friction , the only cheat would be to replicate this by using a blow torch to heat the linings then clean off the liner until there is no more oil coming out , this has its problems as it makes the rivets brittle.
“A loose bearing is a happy bearing” is what I was taught. Not literally loose, basically that over tightening will burn them up.
It’s all by feel. I don’t know how these internet keyboard warriors would ever be able do it, they need a torque spec for everything.
He's right but you still have to have a lot of money....
What money? Lol
Posted 12 hours ago and youtube has not notified me of a new video yet. WTF!
what kind of seal do you use...Gray seal
Harp seal
Northern elephant seal
Hawaiian monk seal
Harbor seal
Northern fur seal
Guadalupe fur seal
Weddell seal
Antarctic fur seal
Leopard seal
Australian sea lion
Galápagos fur seal
Ringed seal
Baikal seal
Caspian seal
Walrus
I FEEL your wheels may come off
I'm not so sure that was the right Jack for the weight of that trailer,no axle stands either just in case the hydraulics in the jack failed
Risk is life
@@TheRustyCracker yeah but risk like that could also be"end of life" and nobody wants that to happen to you
@@johnmoloney5296idk some people do lol
@@TheRustyCracker well i wouldn't be one of them thankfully
What he was doing here isn't dangerous, if it was loaded it would be a different story. I've changed these seals for 44 years without a jack stand, but used bottle jacks. It will only drop about 4 inches if the jack fails..
Tax write off 🤷🏽♂️🤷🏽♂️
But learning is key tho lol
Typical owner op thinking they know how to work on there stuff but have no clue
lol I’m not just a regular owner operator….. if u know my channel then you should know better then to say that
Thats right, that pussy dont know shit
Explain what was done wrong in your opinion? #FJB and his administration
@@ky.gambler5281 this guy just doesn’t know that I have fully rebuilt a flipped upside down semi truck and trailer,,, don’t blame him lol
Your wrong he did a good job he mentioned torquing the wheel nuts Iv'e seen so called mechanics that did not do that, an owner operator that won't do some basic repairs is one that will probably fail.
Why do you total so much equipment?Your driving record must be terrible
Sorry what?
Omg. Fukn liberals are breeding and voting .. TRUMP 2024