Guys I got a problem, I did connect my pump 4 pin to the CPU header and also both of fans into that split cable which he did in the video. All good, I connected aboth the CPU block and both 2 fans with their 3 pin cables but I have no 3 pin slot on my moba to connect one of them as he did in the video, what should I do?
@@itcarecomputersquestion do you know if this is compatible with z-390 a prime? i connected everything as in the video except the 3 pin rbg for the AIO because i only have 4 pin connectors as well
Is urs so far good?? Coz i bought that liquid cooler 2 days ago and when i check for reviews it got many negative comments about the prpduct :( in my set up im still observing.
those bad reviews are for the 240r .... not the c240 i did not see many bad reviews for this cooler other than some personal gripes with fitting and motherboard connection issues, when i was deciding to buy this with a 5800x as a bundle on prime day, its been solid for me so far.
@@itcarecomputers because I’m considering the MSI set-up in the case MSI forge 100r, b660m wifi mortar, rtx 4060 ti, and choosing the cooler now, selecting between stock cooler or this msi mag coreliquid
@@alxtpkn Any extra cooling over the stock cooler is a W. You can't really ever be overkill with cooling. Unless you're tipping LN2 onto your CPU of course.
Hello ill paste my comment in the main comments very important as top mounting this will kill your unit over time! Dont believe do research. Be very careful as MSI is showing it top mount in pics. This AIO is unique it's pump is in the radiator not the block that attach to cpu. If you top mount there will be air bubbles up there as it's higher and will effect tube suction and likely lead to early death. I read people online who had theirs die within 2 to 6 months while front mount no issues. I had mine top mount for 2 weeks until I realised thankfully seems no bad damage it's now front mount with tubes coming out of lowest point (tubes bottom ideal but top if they can't reach still better than to mount it top). I also get much better cpu temp while my gpu went up just slightly no big deal. Best of luck. MsI are basically advertising the way that will kill your unit on the box... so bad LASTLY VERY IMPORTANT front mount you need the fans flipped with back side facing into fan so it's pulling air through the fins. That side is more ugly but I used black sticker on back of it looks good. Very important otherwise fans will be exhaust out front you don't want that you want exhaust top and back with case fans and AIO intake front
That's what the square block is in the middle of the fins on the radiator. They do this to get away from paying Asetek since Asetek owns the patent for the design used on most pump on block AIOs.@@RiloKen
@@TLM-Nathan Thats very interesting...thank you for that info, I have never heard of that in my many many years of pc building haha. Think I will avoid this rad when I build my next pc.
Be very careful as MSI is showing it top mount in pics. This AIO is unique it's pump is in the radiator not the block that attach to cpu. If you top mount there will be air bubbles up there as it's higher and will effect tube suction and likely lead to early death. I read people online who had theirs die within 2 to 6 months while front mount no issues. I had mine top mount for 2 weeks until I realised thankfully seems no bad damage it's now front mount with tubes coming out of lowest point (tubes bottom ideal but top if they can't reach still better than to mount it top). I also get much better cpu temp while my gpu went up just slightly no big deal. Best of luck. MsI are basically advertising the way that will kill your unit on the box... so bad
PS front mount you need the fans flipped with back side facing into fan so it's pulling air through the fins. That side is more ugly but I used black sticker on back of it looks good. Very important otherwise fans will be exhaust out front you don't want that you want exhaust top and back with case fans and AIO intake front.
@Malazan hi thanks i did make top an back exause and front giving air i have 3 fans infront and 2 ontop for cooler an 1 at backso fort is cooling and top and back is exause
This is true, I just bought 2 more ram to upgrade today and only manage to stick one more ram in. The one on the far left is obstructed by the liquid tubes. Any workaround for this? or do I need to remove that cooling? 😑
As easy installing this thing as going to the toilet. Unlike the made by clowns and designed to fail artic freezer 3 240 i just wasted 70 pounds on. Screws were too short and fronzen in place as well. They would not turn freely and felt like 30 year old frozen in place screws. The screws were also too short. Idiots design that thing. Avoid the Am4 and 5 platform AIO arctic freezers unless you like throwing money away. I could not even install mine. First time in 30 years i failed to install a piece of computer hardware. Look here on youtube for comments on the AMD artic frezzer 3 240 installation videos. People have broken cpu's and mobos trying to install the arctic freezers.
Thanks for the video! I didn't realise the hoses rotated. Saved the day!
I have a doubt, can i connect this cooler to any motherboard means now thesedays every motherboard will have its connector pin
perfect, so detailed, nice job!
How are you cleaning up the fans? Could dismantle them from the case without damaging your motherboard, and then remove the fans from the cooler?
my motherboard is asus prime 660mk d4 i don't have some pins for example how do i do aio pump
Guys I got a problem, I did connect my pump 4 pin to the CPU header and also both of fans into that split cable which he did in the video. All good, I connected aboth the CPU block and both 2 fans with their 3 pin cables but I have no 3 pin slot on my moba to connect one of them as he did in the video, what should I do?
Use first 3 pin of motherboard 4pin header
@@itcarecomputers hi can i message you on whatsapp?
@@itcarecomputersquestion do you know if this is compatible with z-390 a prime? i connected everything as in the video except the 3 pin rbg for the AIO because i only have 4 pin connectors as well
@@AdamMartien-dp6ic then you have to buy rgb controller
Is urs so far good?? Coz i bought that liquid cooler 2 days ago and when i check for reviews it got many negative comments about the prpduct :( in my set up im still observing.
those bad reviews are for the 240r .... not the c240 i did not see many bad reviews for this cooler other than some personal gripes with fitting and motherboard connection issues,
when i was deciding to buy this with a 5800x as a bundle on prime day, its been solid for me so far.
Can i pair withy i5 12400f cpu pla reply
This or Coreliquid 240r V2? which one is better?
Does it come with the thermal paste?
Yes
@@itcarecomputers thanks
does it fit with micro atx mother boards?? and micro atx case
Depends if your case can fits a 240mm aio and also if your ram is in the way
can this fan work for my ryzen 5 7600 it is getting high temperatures with its stock fan
My mother board downs that’s that 3 pin connector slot what should I do?
same here have you found any alternatives or solutions?
@@AdamMartien-dp6ic I have, you can just plug it into a 4 pin. That worked for me
@@Colin223-4kfr? i tried but its missing the one yk it wont go in sadly
@@Colin223-4kfr? i tried but its missing the one yk it wont go in sadly
good for 13700k cpu ? or you recomendet some beter ? because play games is show 78 temperature nothing good
78 градусов это мало. Тем более в играх i7 13700k никогда не будет загружен на 100%, поэтому температуры будут намного меньше чем в тестах.
I used the same cooler. It failed after 2 years of usage. Not recommended
their not meant to be used for too long they only last 2-4 years depended on how you installed it
Thank you, the only thing i need to hear
Is it worth to buy for 12400f or it would be overkill?
For 12400f any 120m air cooler is good enough but if you have good budget then that liquid cooler is best option
@@itcarecomputers because I’m considering the MSI set-up in the case MSI forge 100r, b660m wifi mortar, rtx 4060 ti, and choosing the cooler now, selecting between stock cooler or this msi mag coreliquid
@@alxtpkn Any extra cooling over the stock cooler is a W. You can't really ever be overkill with cooling. Unless you're tipping LN2 onto your CPU of course.
@@HxR-eSports Hi! I have already bought 12400f and this cooler
@@alxtpkn Good stuff. I'm sure your CPU thanks you. 👍
With that setup you’d be exhausting air out right?
yes
Do I not need to get some kind of liquid in it? 🤔🤔
Nah, aios come with it already. Aio meaning all in one. Think of it as a prebuilt water cooler
how to switch colors???
With motherboard or use any rgb controller
Can i get it for my i5 11400?
Yes
@@itcarecomputers asus prime b560m-k motherboard
does it come with thermal paste
Yes
This good with 13700kf?
Probably, but aim for a 280 or 360.
I'm using a amd ryzen 3 cooler now its time to upgrade
Best of luck
How should I mount for front-facing case intakes?
What case do you have?
@@itcarecomputerscooler master nr400 it's the same mounting right?
Hello ill paste my comment in the main comments very important as top mounting this will kill your unit over time! Dont believe do research.
Be very careful as MSI is showing it top mount in pics. This AIO is unique it's pump is in the radiator not the block that attach to cpu. If you top mount there will be air bubbles up there as it's higher and will effect tube suction and likely lead to early death.
I read people online who had theirs die within 2 to 6 months while front mount no issues. I had mine top mount for 2 weeks until I realised thankfully seems no bad damage it's now front mount with tubes coming out of lowest point (tubes bottom ideal but top if they can't reach still better than to mount it top). I also get much better cpu temp while my gpu went up just slightly no big deal. Best of luck.
MsI are basically advertising the way that will kill your unit on the box... so bad
LASTLY VERY IMPORTANT front mount you need the fans flipped with back side facing into fan so it's pulling air through the fins. That side is more ugly but I used black sticker on back of it looks good. Very important otherwise fans will be exhaust out front you don't want that you want exhaust top and back with case fans and AIO intake front
Which pin inputs do we need to use on the motherboard? Can you write them all in order?
The pump is in the radiator?
That's what the square block is in the middle of the fins on the radiator. They do this to get away from paying Asetek since Asetek owns the patent for the design used on most pump on block AIOs.@@RiloKen
@@TLM-Nathan Thats very interesting...thank you for that info, I have never heard of that in my many many years of pc building haha. Think I will avoid this rad when I build my next pc.
where should i place radiator should it be on top or can it be infront
Be very careful as MSI is showing it top mount in pics. This AIO is unique it's pump is in the radiator not the block that attach to cpu. If you top mount there will be air bubbles up there as it's higher and will effect tube suction and likely lead to early death. I read people online who had theirs die within 2 to 6 months while front mount no issues. I had mine top mount for 2 weeks until I realised thankfully seems no bad damage it's now front mount with tubes coming out of lowest point (tubes bottom ideal but top if they can't reach still better than to mount it top). I also get much better cpu temp while my gpu went up just slightly no big deal. Best of luck.
MsI are basically advertising the way that will kill your unit on the box... so bad
PS front mount you need the fans flipped with back side facing into fan so it's pulling air through the fins. That side is more ugly but I used black sticker on back of it looks good. Very important otherwise fans will be exhaust out front you don't want that you want exhaust top and back with case fans and AIO intake front.
@Malazan hi thanks i did make top an back exause and front giving air i have 3 fans infront and 2 ontop for cooler an 1 at backso fort is cooling and top and back is exause
Does it come with coolant?
dude ! its an aio ... all in one lol ... coolant is already inside from the factory as with all aio coolers.
try with 4 ramsticks. it won't fit.
It probally will fit
Well if either of yall get it and try it with 4 stick let me know, I’m putting my parts list together for a new pc right now haha 😂
This is true, I just bought 2 more ram to upgrade today and only manage to stick one more ram in. The one on the far left is obstructed by the liquid tubes. Any workaround for this? or do I need to remove that cooling? 😑
How to change RGB light color?
With motherboard rgb software or use any rgb controller
@@itcarecomputers thank you😘
As easy installing this thing as going to the toilet. Unlike the made by clowns and designed to fail artic freezer 3 240 i just wasted 70 pounds on. Screws were too short and fronzen in place as well. They would not turn freely and felt like 30 year old frozen in place screws. The screws were also too short. Idiots design that thing. Avoid the Am4 and 5 platform AIO arctic freezers unless you like throwing money away. I could not even install mine. First time in 30 years i failed to install a piece of computer hardware. Look here on youtube for comments on the AMD artic frezzer 3 240 installation videos. People have broken cpu's and mobos trying to install the arctic freezers.