2014-2019 Ford Fiesta ST Performance Air Intake Installation Guide by Mishimoto
HTML-код
- Опубликовано: 6 окт 2024
- 2014-2015 Ford Fiesta ST Performance Air Intake
www.mishimoto.c...
2016-2019 Ford Fiesta ST Performance Air Intake
www.mishimoto....
Engineering: engineering.mis...
Facebook- mishimoto.com/f...
Twitter- www.mishimoto.c...
Instagram- mishimoto.com/i...
Model: MMAI-FIST-14
• Direct fit for 2014-2019 Ford Fiesta ST
• Dyno-proven maximum gains of up to 6 whp and 10 wtq on the stock tune
• Highly aggressive intake tone under acceleration
• Designed to work with stock tune with no additional tuning required
• Air filter placed to receive maximum airflow from the front of the vehicle
• High-flow filter operates at up to 2,000 CFM
• Black powder-coated airbox keeps unwanted hot air from entering the air filter
• Available with a polished, wrinkle black, or wrinkle red pipe
• Mishimoto Lifetime Warranty
Disclaimer
• Please dispose of any liquids properly.
• Allow vehicle to cool completely prior to attempting installation.
• Mishimoto Performance (MP) is not responsible for any vehicle
damage or personal injury due to installation errors, misuse,
or removal of MP products.
• MP always suggests that a trained professional install all
MP products.
• Do not run the engine or drive the vehicle while overheating.
Serious damage may occur.
• Raise vehicle only on jack stands or on a vehicle lift.
You’re guy’s products have come so far, from just clamps and accessories. I’m so glad to have been here love your products and will continue buying for all my future builds!
You guys have the best install videos for auto parts I have ever seen. From the tool overview, to the step by step instruction. Kudos
Thanks Nik, we really appreciate it!
Wow what a fantastic video demonstration, best ever! Never heard of Mishimoto before ( we dont have you in Norway I think ) But I will definitely check you first whenever I need something upgraded!
Thank you! This video is simply perfect.
Wow. The best install video on You Tube. Greetings guys.
quality brand. and very well made video with details
is this intake legal to use in california?
On their website it has the CARB certification "CARB Compliant EO#: D-759-1"
Lane House So is that a yes?
Will this fit a 2019 ST-Line?
Hello, This does not fit the ST-line models. Sorry!
St- line is just a regular Fiesta with nice trim. You have a completely different engine.
Will this intake be made available in the UK ?
What size are the bolts for the maf I bought a used intake and do not know what size and thread they are?
Shoot us an email at support@mishimoto.com and the team will be happy to look into this for you.
2.5mm Allen bolts
@@theighthokage2943 2.5mm Allen just tells you what size Allen key to use I needed the thread pitch. the bolt used is a M4 x 0.7.
@@vtbbs2k what year was your st? Bc the new ones come with like a dual port thing and every video I’ve seen only shows the single port
@@theighthokage2943 are you talking about the evap hose? The 2014-2015 just have one, 2016+ have two evap hoses so you need to buy the right one for your year.
does it not fit on a 2013?
We do not show that this is compatible with the 2013 models.
Do you mean '14? There shouldn't be a '13 model.
Is this the same procedure for the 2016 as well? Can't seem to find one for it and this says only 14-15
Hey Eric! Basically the same, with a few minor differences. So, if you go the video at 1:28 - Rob disconnects one Evap line from the intake pipe. On your car, there will be two of these connectors - you will disconnect both of them in the same way. If you go to 4:53, Rob reconnects the same hose to the Mishi pipe - it would be at this point that you would follow the above step to install the adapter - it basically takes two evap hoses and makes them one. Let us know if this makes sense, or you need any additional instructions/have any questions! :)
Mishimoto Automotive You guys should just make a video on the '16 install.... lol. Or maybe a shortened video explaining the differences between the updated install on the newer models?
Anyone have any advice on getting that worm gear clamp loosened up on the intake air tubing down by the turbocharger on a '16? It's wayyy down there and the bolt is facing the front of the car. It may look easier for other people compared to me, I have super meaty hands so these things become a challenge. Lmao. Any tips?