Thank you, you saved me. I installed new shut off valves and tested the drum. Found a leak in the valve and had darn near a full drum off water. Again, thank you, you saved me Edit: Words and punctuation. 😅
Hey dude, this is a light saver. I accidentally don’t know what’s going on, but my washing machine has like water in it and I’m just don’t know how to get rid of it, but I think I know what to do
To me it seems mechanical and the only real solution would be to open up the protective casing to see the mechanics of it. I did however find this link: www.lg.com/us/support/video-tutorials/lg-washer-spin-only-option-CT10000010-1374092270314 Hopefully that can help guide you a little.
Good question! Sometimes the drain line or the filter can get clogged. Only other reason I can think of is the washing cycle gets stopped prematurely before the washer started the draining process. Hope that’s helpful to you. Thanks for watching!
When I drain my washer (I have the new Signature Series) I get a pint or more of water every time. even after only running the machine for one cycle. The LG video shows ony a couple of ounces of water coming out of the drain... is this amount of water a problem?
I noticed in the comments you mentioned about unplugging the machine to reset it... Is that a possible solution... I just got the washer and just want to make sure it is not damaged or have some kind of problem and wanted to check and see if a pint or more of water coming out of the drain was excessive. Thanks for your help and for the video.
I appreciate the question and to be honest, I’m not sure. To me it sounds like it could be a problem. My best recommendation would be to reach out directly to LG technical support. They will be the best people to give you the exact answer on that good luck!
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
This was a lifesaver, I looked everywhere and nobody could give a straight answer for some reason thanks
THANK YOU!! I almost gave up after looking at so many videos, all over the internet, and in the manual. This saved my day.
Worked like a charm! My model let me pick "no" spin speed but it still drained the tub and finished within 1 minute.
So helpful
Keep going with more videos
Thanks for the video, really helpful 😊
Thanks- it worked! Guess we need to reset, then maybe check the drain pump
How did you open the door ours is full of water and won’t open the door lights are flashing it’s a different brand
Very helpful, very informative. Thank you!
Thanks it helped me out a lot
Happy to hear that. Thank you for your comment!!
thank you so much for the video!!!
Thank you, you saved me. I installed new shut off valves and tested the drum. Found a leak in the valve and had darn near a full drum off water. Again, thank you, you saved me
Edit: Words and punctuation. 😅
I’m happy I could be of help to you!!
Thanks that was real helpful!
How about some explanation as to what you did and why the problem was fixed?
Thank u so much its worked🥰🥰🥰🥰
Great! Happy to hear!
Thank you it worked!!🎉🎉
You are very welcome!! Happy to hear that!
@@handymanfortheaverageman7975 thanks .it work
Hooray 👏 it works.
Thanks a lot
Happy this video helped you. Thanks for watching!
Thanku it really helped .....😌
Happy to hear! Thanks for watching.
Thank you so much this really helped
Happy to hear that!! You’re very welcome.
Thank you. I did it on my and it worked.
You are very welcome! Happy to hear another success story! Thanks for sharing.
Ya it works but I have to do it after every other load, so what’s the real issue with my washer? 2010 lg true balance
Good question. It almost sounds like it needs a reset. Have you unplugged it from the wall and starry it over from there?
I recommend checking out your drain pump. You may need to replace that.
Hey dude, this is a light saver. I accidentally don’t know what’s going on, but my washing machine has like water in it and I’m just don’t know how to get rid of it, but I think I know what to do
This is one of the things the top load machine has a clear upper hand over the front load one. You can just press a button, and it'll drain, very easy
Valid point.
My lg only has a rinse and spin. It’s supposed to only be 13 minutes, but it’s been spinning for 2 hours with no draining.
But why is there water in it in the first place, two loads came out wet?
So helpful
Happy to have helped! Thanks for the feedback.
I have noise but no spinning. Any thoughts??
To me it seems mechanical and the only real solution would be to open up the protective casing to see the mechanics of it.
I did however find this link: www.lg.com/us/support/video-tutorials/lg-washer-spin-only-option-CT10000010-1374092270314
Hopefully that can help guide you a little.
Why does water stay in the drum?
Good question! Sometimes the drain line or the filter can get clogged. Only other reason I can think of is the washing cycle gets stopped prematurely before the washer started the draining process. Hope that’s helpful to you. Thanks for watching!
Thanks 🙏🏾
Thank you!
You are very welcome!
Thank you I was panicking on what to do
Thank you bro
You are welcome! Thank glad I could help you.
When I drain my washer (I have the new Signature Series) I get a pint or more of water every time. even after only running the machine for one cycle. The LG video shows ony a couple of ounces of water coming out of the drain... is this amount of water a problem?
I noticed in the comments you mentioned about unplugging the machine to reset it... Is that a possible solution... I just got the washer and just want to make sure it is not damaged or have some kind of problem and wanted to check and see if a pint or more of water coming out of the drain was excessive. Thanks for your help and for the video.
I appreciate the question and to be honest, I’m not sure. To me it sounds like it could be a problem. My best recommendation would be to reach out directly to LG technical support. They will be the best people to give you the exact answer on that good luck!
Doing a reset certainly shouldn’t hurt it!
Thank you
Thanks it worked
Happy to hear!
Thanks
You’re welcome! Thanks for watching.
How long do you wait for it to spin?
I did a whole spin cycle. It was only 12 minutes or so.
@@handymanfortheaverageman7975 thanks. The humming just keeps going no spin :(
So is your tank full of water and won’t drain?? Did you try a drain cycle?? Or is your issue that the tank simply won’t spin at all and only hums??
@@handymanfortheaverageman7975 Won’t spin and only hums
@@handymanfortheaverageman7975 I have the same problem as Jennifer..
FYI: this addresses some backups, yet perhaps not the cause.
FYI: women also require maintenance education. ;)
Did it and it just spins.
You did the no spin cycle and it just spins?
Singing washing machine
What?
I never heard a washing machine play that long of a song when it’s done. It’s cute
@@Airbus_A.320 oh haha. Too funny.
Explained me pls
I’m sorry. I don’t understand. What?
Speak louder so we can hear what you are saying
Thanks for the feedback. I probably just need to spend my own money to invest in better equipment.
Worked like a charm! My model let me pick "no" spin speed but it still drained the tub and finished within 1 minute.
Thank you 🙏🏽
You are very welcome! Happy it helped.
Thank you!
You're welcome!