DIY Plasma Cutter With 9V Batteries!

Learn how to make a mini plasma cutter at home using 9 volt batteries and aluminum foil!
Subscribe and watch more dope videos: bit.ly/sub2packer

[@mshashank8019]

Came here from a BeastReacts video...but dude this was sick!!!

[@PackerAnderson]

Thanks!

[@therealbeluga7385]

Don’t know you from beastreacts fake you have nothing better to do

[@Mandylandyinnebandy]

@@therealbeluga7385 bro what💀

[@jaxon1913.]

@@therealbeluga7385 I think he has a stroke while writing this

[@Mandylandyinnebandy]

@@jaxon1913. bro my stroke had a brain trying to read his comment

[@oscar3402]

Que tipo de cable es el que utilizas?

[@sweetnbitr33]

Nice thanks

[@jdawson016]

You've created a mini carbon arc gouging device - cool!

[@PackerAnderson]

Nice, is that the technical name?

[@jdawson016]

It's a description of a process - using carbon electrodes with an arc welder will gouge steel and allow the welder to cut it - much like a plasma torch, but with somewhat less precision...

[@stevecummins324]

With a better power supply(some kind of welding power supply? Nb. The high amp twist and lock wire connectors are standardised and called DINZE plug) carbon arc is an easy way of temperatures capable of melting *any* metal including steel.
Problem is such high temps tend to melt refractory. Especially homemade ones.. Solution i found is to line the foundry with starlite esq matterals. flour baking soda, and pva glue mix. On heating that swells (Lots!) as it's surface turns in to a highly insulating carbon foam. OK the carbon foam is highly flammable, but it stop burning once all oxygen inside furnace has been used up.

[@michaelhorne8366]

This is carbon arc cutting, not plasma. You're using the heat of a carbon arc to melt the foil as opposed to a jet of accelerated charged particles.

[@Ihavetruth22]

this why youtube sucks now. no more negative thumbs down button or reporting of fake videos,

[@stevecummins324]

Any Electrical spark, or arc, *is* a plasma.. (Nb even combustion flames are weak plasmas... And can be used to conduct electricity. it's easy to make thermionic valves that utilise ambient air pressure flames rather than low pressure gases)
When air exceeds it's electrical breakdown voltage it becomes ionised and along with electrons those ions carry the current.

[@Slaf42]

Hm, mine didn’t work that good. Can I send you a picture of my set up and u tell me what’s wrong with it? PLEASE RESPOND

[@PackerAnderson]

Sure! I don’t normally do this, but you can email a pic to [e-mail]

[@Slaf42]

@@PackerAnderson did it! U got the pic?

[@PackerAnderson]

Sorry for the late reply, I think it sent to my spam folder, could you resend it?

[@Slaf42]

@@PackerAnderson Ok!

[@Slaf42]

@@PackerAnderson Did it. U got the pic?

[@skijax2746]

thats actually really sick

[@TheSpookiestSkeleton]

Well you're cutting and plasma is involved so I do suppose it is a plasma cutting tool

[@nathankane38]

Just use a small power supply some are cheaper than all the batteries and it lasts forever

[@PackerAnderson]

Good idea

[@Football_productions_]

Here from mrbeast!

[@adntoo4608]

Same

[@PackerAnderson]

Same….Wait 😂

[@Football_productions_]

@@PackerAnderson 😂😂thanks for commenting 🙏

[@oscar3402]

Es el mismo procedimiento con pinzas de cocodrilo??

[@PackerAnderson]

I’m just using some insulated copper wire, yes the procedure is the same with alligator clips

[@oscar3402]

​@@PackerAnderson Thank you New sub

[@tates49bc83]

Don’t ever use cheap batteries, facts

[@Newbie567]

Can this work with normal battery’s not dual

[@PackerAnderson]

Like just one battery? Or smaller batteries?

[@larva5606]

Probably ahould still wear eye protection.

[@wolfseeker2023]

Love it

[@shauryaverma9133]

Remember me when u get famous

[@PackerAnderson]

Ok I will

[@davey2k12]

😂😂😂 mmmm what use it for that a blade cud do better I used to engrave metal objects like personalised stuf but I was a kid learning over ²⁰ years ago 😂😂

[@resenese573]

Also connecting 9v batteries (even dead ones) is a great way to kill yourself. Do not do this at home.

[@user-ck3pi1qp3w]

They aren’t strong enough to kill you

[@michaelhorne8366]

@@user-ck3pi1qp3w It can take anywhere from 30 to 150mA across your chest (reads, hand to hand) to interrupt cardiac rhythm, 100mA is the generally quoted figure. As low as 0.01mA via sub-dermal (something has penetrated your skin to the wet layer) conduction will do the trick. A 9V battery can deliver 1Ah (1000mA over 1 hour) of current. If your hands are wet or sweaty or you happen to have cracked skin from callouses or other wounds, there is a definite chance you can cop a lethal hit.
Yes you can lick a battery and be fine, because the current is passing across the 10mm or so of your tongue between the terminals, not across your chest.
The dude your replying to is prolly being a little over dramatic (and yes, a close to flat battery may still be able to deliver 1/10th of its power, 100mA), but to say they "aren't strong enough" is also wrong.
www.asc.ohio-state.edu/physics/p616/safety/fatal_current.html

[@PackerAnderson]

Yes be careful, also don’t plug open wires into the outlet 😂

[@idk.network]

U got a mr beast shout out

[@PackerAnderson]

I know! It’s crazy!

[@LouisTroyAustin28]

Could you use this to cut steel plates

[@Ihavetruth22]

look up car battery welder

[@talgaming154]

Are u the fan of Mr best

[@PackerAnderson]

Yessir

[@Lalovoe]

i saw like 100 things get dropped off

[@PackerAnderson]

On beast reacts?

[@Lalovoe]

@@PackerAnderson What ... I literally never made that comment

[@ddogoo3749]

When did I sub to you istg

[@PackerAnderson]

I don’t know! 😂

[@Kyleisdope52107]

Hi

[@PackerAnderson]

Hi!

[@Kyleisdope52107]

Can you shout me out in ur next video?

[@JovYeaa]

7th

[@PackerAnderson]

0th

[@ronan582]

ρгό𝔪σŞｍ

[@keax6768]

Im second

[@PackerAnderson]

So close!

[@sephsolves9150]

Hi I'm first

[@PackerAnderson]

Hello

[@sephsolves9150]

I saw this when it was posted 30 seconds ago

[@PackerAnderson]

Dang that was fast