I followed your instructions to the T. I just got a melco emt16x and I had no idea how to do this. I am new to a multineedle machine. This was soooo helpful. Thank you ❤
I love the placement! I always put it further from the center instead of closet-if I am unsure. I also ALWAYS print the design from embrilliance and then I mark the cross hair points with a heat erasable pen.
Very Helpful! Do you know why you can resize and curve some fonts in Embrilliance Express, but other BX fonts are specific sizes without editing options?
love this! I have a brother SE600, and it does not have the laser feature that your machine has. You were able to lineup this curved embroidery perfectly!
Oh man! I have so much to learn still!! I didn’t know you could eliminate the jump stitches!!! Thanks for the tip, I will have to try that next time!!!
Great video! I have a Melco embroidery machine but when I adjust the design to the printout using the laser, it's off the might hoop on the Melco Software. What I am doing wrong?
I am going to use your technique to try and embroider my Text logo on my tee shirt neckline for my first RUclips video next week. I wanted to brand my tee but wasn't sure what I wanted. Thank You for giving me another option!
I like it just where it is. It looks great! You make it look so easy. I’m just getting back into embroidery. I have Bernina software. Whatever you have looks easier.
This is exactly what I was working on last week. What software are you using? I have an iMac and I’m not crazy about the software I’m using. Yours looks so much easier to manipulate. 😮
Soft and sheer is a cutaway but super thin! I just didn’t want it to be scratchy at the neck!! A lot of major retailers had no backing showing (when I was researching I saw a lot of sweatshirts at the stores with no visible stabilizer …meaning they probably used just tear away!!) but use what you think would be best for the item you are embroidering!!
Yay!!! Hahaha I purposely tried to not watch any other tutorials so I could figure it out !!! My brain could not handle hooping it crazy or diagonally so this worked great for me!!! Hopefully it will work for you next time!!!
Yes I can try next week , but until then what you do is you mark the spot you want to embroider , hoop it or float on top with pins and then roll up the sides to almost make like a bowl shape… the center of the inside of the “bowl” is the spot you are embroidering! I hope that makes sense until I can make one!! I think Angela Jasmina has a video on how to embroider a onesie on a single needle! It is the same concept! Hope this helps
Have you ever embroidered a curved neckline?? Let me know your tips and tricks below!
I hate pinning my printed designs - highly recommend small pieces of painters tape to hold your designs.
I followed your instructions to the T. I just got a melco emt16x and I had no idea how to do this. I am new to a multineedle machine. This was soooo helpful. Thank you ❤
I love the placement! I always put it further from the center instead of closet-if I am unsure. I also ALWAYS print the design from embrilliance and then I mark the cross hair points with a heat erasable pen.
Thank you so much. Your tutorial was perfect. I did first one after watching your video and it came out great. On to the sleeve......☝
Looks great, I need to give it a try
Lovely placement! It would look like a name tag if closer to center. This is a keeper.
I wii have to try this for my daughter in law, for her first Mother’s Day! Thanks for the video
Very Helpful! Do you know why you can resize and curve some fonts in Embrilliance Express, but other BX fonts are specific sizes without editing options?
Good job. Not done curved neckline yet.
This was a great video! I've looked at others and this one tops them all! Thank you.
I can’t wait to try this. I love the placement especially if you have necklace on.
I love right where it is. I got my tshirt and going to try it😍thanks for sharing!
Yes !!! Let me know if it works for you!!
love this! I have a brother SE600, and it does not have the laser feature that your machine has. You were able to lineup this curved embroidery perfectly!
You did such a great job! It came out so freaking pretty! 😍 Thank you for bringing us along. Keep up the awesome content!!! 💗
You made it loo so easy. I am going to try on a old shirt. If I mess up all I lost was an old shirt. It's a win-win!
The positioning is perfect! Thanks for the tutorial!
Love the placement … classic!
Have you done this on the Brother multineedle? Personally, I like the curvature but would have liked it a little closer to the neckline.
I click the dot and change the color of every other letter. Then when I stitch I hit 1 color for all and it will eliminate the jump
Oh man! I have so much to learn still!! I didn’t know you could eliminate the jump stitches!!! Thanks for the tip, I will have to try that next time!!!
What?! I need more details on this! Sounds awesome! What dot are you clicking?
Did you remove the printed paper
I’m excited now back to the video lol
Thanks for the video, I’m about to try this for the first time! 😊
Where can we find placement chart that you refer to in your videos? Thank you ! ❤😘
Going to try tomorrow! I just did the Roman Numeral Anniversary today on a crewneck sweater and I love it!!
Perfect placement and cute font! Thanks for sharing because I wondered how to make it work.
Great video! I have a Melco embroidery machine but when I adjust the design to the printout using the laser, it's off the might hoop on the Melco Software. What I am doing wrong?
I am going to use your technique to try and embroider my Text logo on my tee shirt neckline for my first RUclips video next week. I wanted to brand my tee but wasn't sure what I wanted. Thank You for giving me another option!
Thanks for the new idea ! It looks great.
I’ll try this
Great video, little tricky but finally got it
I like it just where it is. It looks great! You make it look so easy. I’m just getting back into embroidery. I have Bernina software. Whatever you have looks easier.
Thank you!! I used embrillance which is a free software that uses BX fonts!!! It was a lot easier then I thought it was going to be!!!
Love where you have it!!!
great video Can you tell me the name of the font on your wall
Oh man!! I don’t know! I ordered that sign from a shop on Etsy! Sorry!
I stitch my neck line at the middle crease you iron down the middle because my hair would cover it by the shoulder
What size is font ? Love love
Love it! Your placement is perfect!
Thank you so much!
Goals! Love!
Super cool! Awesome work!
This is exactly what I was working on last week. What software are you using? I have an iMac and I’m not crazy about the software I’m using. Yours looks so much easier to manipulate. 😮
I am using Embrilliance!!! It works amazing with an iMac! I think I am using the free version here!
@@TheMonogramMompreneur That’s what I’m using too, but the paid version. Essentials for now. It just seems so complicated on my Mac.
Looks beautiful x
I have not tried yet. Hope to this weekend. Why do you choose soft and sheer over, fusible polly mesh, or just regular cut away?
Soft and sheer is a cutaway but super thin! I just didn’t want it to be scratchy at the neck!! A lot of major retailers had no backing showing (when I was researching I saw a lot of sweatshirts at the stores with no visible stabilizer …meaning they probably used just tear away!!) but use what you think would be best for the item you are embroidering!!
I have a brother PE 800 you think I be able to make one with my machine?
you did it great tyvm
Thank you!!!
How did you get other font options on Embrilliance. I don’t see that on mine. Just the one option
You did a really great job Ashley, I love it!!!
Thanks for sharing! Very bubbly personality too 🙂😅
Thank you!!
Would have loved closer up view of the PC, to see what you were doing
Looks great
Looks perfect to me. Where are your earrings from? Love them
Shein!
Where do you get the free version of software? Thanks.
Turned out very nice!!! Great 👍
How do you get the free version of Embrillance?
What program are you using?
I love it! Where did you buy the embroidery scissors you have?
Sorry I keep forgetting to link them!! They are by far my favorite! I believe they are called HAVEL double curved scissors! I got them from Amazon!
@@TheMonogramMompreneur Thank you, Im going to order one
Thanks for sharing
I love it!! Awesome
It looks perfect❤️
What digitizing program are you using. I have sew what pro, but need a digitizer app that works with SWP.
She is using Embrilliance software
I love it
Thank you ❤
Do you save in Embrillance as a dst and then transfer to Design Shop?
I save as dst or pes !! And yes then I upload into deisgn shop!
@@TheMonogramMompreneur thank you.
Omg love 💕 it Your so amazing. Thanks so much I appreciate you
Thank you so much!!!!
which size are you wearing for reference?
are the sleeves xl?
I am wearing the Medium Unisex Gildan Sweatshirt
What spray adhesive did you use??
its called 505 Temporary Fabric Spray Adhesive
Looks great! It’s on my list to make 😊 I love the placement.
super cute
I do these and print also, but stink, I never thought about rotating it before I sent the design to the machine. I rotated the shirt. Mind blown
Yay!!! Hahaha I purposely tried to not watch any other tutorials so I could figure it out !!! My brain could not handle hooping it crazy or diagonally so this worked great for me!!! Hopefully it will work for you next time!!!
What software program do you use?
Embrillance! I love BX fonts!
I think it looks great - I am going to try it - I wish you went slower with the essentials process
thanks Michele! and thank your for your feedback! -Ashley
Can you use a pe800 and do this?
Yes! You would do what is called “stitching in a hole” technique !
@@TheMonogramMompreneur ok. I’ll have to research that. I’m new to the embroidery world. 😄
I searched the technique you said but I can’t find anything on it. Can you do a video explaining it?
Yes I can try next week , but until then what you do is you mark the spot you want to embroider , hoop it or float on top with pins and then roll up the sides to almost make like a bowl shape… the center of the inside of the “bowl” is the spot you are embroidering! I hope that makes sense until I can make one!! I think Angela Jasmina has a video on how to embroider a onesie on a single needle! It is the same concept! Hope this helps
@@TheMonogramMompreneur thank you so much. 💗
Beautiful 😍
I'm sorry, I guess I'm old. I can't tell where that little circle button is! I'm lost!
I thought you weren’t supposed to use tear away of anything you wear as it’s not comfortable