How To Apply Adam's Graphene Ceramic Spray Coating Advanced
HTML-код
- Опубликовано: 5 сен 2024
- Adam’s Graphene Ceramic Spray Coating™ Advanced is an easy-to use Ceramic Coating that can be seen where applied using the Adam’s UV Flash light and our patent-pending UV Tracer Technology™. This coating is appropriate to add long-lasting, extreme self-cleaning effects for single-stage and clear-coated, painted surfaces, glass, plastic trim, polycarbonate, rubber moulding, and wheels with a single bottle.
For more in depth content and education, subscribe to our channel. Leave a comment or question to engage with one of our Adam's Team Members.
•••Become a subscriber to Adam's Polishes RUclips Channel
/ @adamspolishes
•••Adam's Polishes Website
www.adamspolish...
•••Adam's Polishes Instagram
/ adamspolishes
•••Adam's Polishes Facebook
/ adamspolishes
•••Adam's Polishes RUclips Channel Homepage
/ @adamspolishes
This is not 1 of the best products I’ve ever used…. This is THE BEST product I’ve ever used.!
I have used many bottles of the OG Graphene Ceramic Spray. So stoked that you guys came out with it in the advanced formula. I did three cars with the OG formula so far this week. Gotta get some of this new stuff ordered. You guys are my favorite. Thanks.
Me too bro. My customers love it
Hey just curious how much do you charge to apply it?
@@SittingWithDogshow much do you charge to apply it? Just curious
Just received mine this afternoon. Prepped and applied it to the windshield of a ‘15 F350 Superduty. Extremely simple & easy application and finishing. The only thing that this video neglected to mention was the 4 hour cure time before exposure to moisture(rain, snow, etc.)
UPDATE - Not impressed. Water repellency is VERY disappointing. Water beads up but does not freely run off the glass. At 70mph big beads kid of walk up the windshield. Super grabby stuff. Again, VERY disappointing. It rained all day from Portland to Whidbey Island and I spent the entire time pissed at how the Adam’s “Advanced” product was failing to perform as advertised. The day after that trip I called Adam’s to inquire about what could have gone wrong. I was told to let it flash for 10-15 minutes instead of 1-2 minutes. Did that last night in a 61° garage and let it cure inside for 10 hours. Raining hard this morning and still the same result. This stuff is $35.98 garbage.
A lot of times products like this require a topper. Ik it stinks because of the cost but I had a heck of a time with 303 graphene until I used a topper extreme solutions makes one called topper. Other then that turtle wax is synthetic spray wax also works well to add slickness and even some depth. Good luck
The flash time will vary based on temps and humidity, the higher for either the shorter/less time it needs. Also, it behaves differently on glass than paint before removal, it is very difficult to see the rainbow appear and then dissipate. Sounds like you may have removed it too soon. What prep did you do?
think you'll have better results with stuff like rain x
Get a WINDSHIELD COATING!
Love this product so far. Going on 8 months with this coat and it still has that mirror gloss and beads water like day 1. Though I do use the graphene detail spray from you guys every other wash. I get complaiments constantly from coworkers. Love it!
The graphene detail spray is that a different product?
love this stuff. really no need for true glass coating with this since all my customers are maintenance washes I just decon wash and light clay and reapply another coat to rejuvenate. its amazing. one of the few truly great affordable coatings that doesn't necessarily require full blown correction. though that only helps. I recommend that for 1st time application only
This graphene coating is BONKERS. I'm applying it as we speak and it's unreal.
I have been using this Graphene polish on my car for over six months and the product does give my car a glass like look and slick finish rain just rolls off as I drive down the road.
I just ordered some of this today along with the Graphene detail spray. It’s gonna be here on Saturday so you know I’m excited!!
Great stuff, I use it on all my cars. Worth every penny and super easy to do yourself. Great video!
FYI. NEVER leave this ceramic coating on plastics. Unless you want that surface to age 20 years in a week. Idk why Adam’s ever recommended leaving it sit on plastics. Especially textured plastics. I don’t think they actually tested it before advising that.
If it’s a textured plastic surface, I wouldn’t even let it cure all the way if you’re going to apply it.
After a lot of complaints they’ve finally started to advise people to at least wipe it. But be warned a lot of plastic trims have been ruined just leaving this stuff sit.
It will make your plastic look like it’s sat in the sun 20 years.
Just clay bared and used this product yesterday. My paint looks amazing!
I did my car yesterday as well. It looks like it just came off the showroom floor
Very well articulated video 💯💯🫡
I’ve been using this as a waterless wash😂😂 it works and it works GOOOD but now I know it’s being used wrong 😂
I have some Carbon Fiber trim running across the front of my forward most dash, on the doors, and Center console area in my B9 Audi S4 , I was just looking at the scratches that have shown up and was looking to find a product that I could use that would help protect from scratches when I detail my interior, I just ordered this spray. I CANT WAIT to use their scratch remover and hand polish I bought from Adams and then coat my
Trim 😃
I find that using a clay "mitt" of a FINE rating does wonders for surface prep. For subsequent applications, a few months later, or more, how does a FINE clay mitt affect the Advance spray coating? I believe that more frequent washing will help prevent the build-up of junk that would necessitate a claying....
Great video, thanks!
Can you advise on how/when to use ceramic boost?
Should a claybay be used before applying the coating?
Is it possible to apply this coating at 15 degrees? What is the appropriate lapping time for this coating?
I applied the advanced spray ceramic on my car and I’m so thrilled with the results I want to use the full GRAPHENE ceramic now.
Can I apply that over the spray ceramic or should I just live with the spray coating that’s on the car now?
Hi P D, you could apply the full graphene ceramic coating on top of the advanced spray coating, but it will not bond as well or last as long. We would recommend waiting 6 months or so, as the spray coating begins to wear some, to then do a thorough decontamination wash, prep, and then apply the full graphene ceramic coating 👍
Should you use strip wash before applying to get wax coatings off?
Love this stuff...Great vid for weekend warriors!
I understand that that with "most" ceramic products, a second coat provides that bit of extra coverage to help ensure the best protection. What is the recommended time to wait after the first application "sets" to apply a second coat? Can a second coat be applied a day or two later, or, does it need to be applied within an hour or two or four?? After the final coating has totally cured, (couple of weeks), I plan to use the Graphene Boost monthly after weekly washing.... Thanks for your professional recommendation....
Second coat after 1 hour. If you wait an entire day, the base layer would have already cured and won’t be able to accept a new linking layer. It’s a shame that Adam’s doesn’t respond to these comments.
@@ShineAndPreserveDetailing so you’re saying that if I apply a second coat eight hours after the first, it’s a waste of time? damn wish I would’ve known that
DO NOT USE THIS ON THE WINDSHIELD. other windows yeah, but the wipers grab the windshield when raining not “gliding” across the glass smooth. Did this on two of my cars.
what did you end up doing afterwards?
Actually all you need to do it apply the coating or a different ceramic to your wipers it will 💯 not grab
I applied to both of my vehicles with zero issues. Absolutely love how hydrophobic it is!
How has this held up? Over the time?
No issues on my windshield.....buy new wipers
I have polished my car with UltraCut from Carpro, my question is, can I apply Menzerna 3800 before the ceramic spray coating advanced?
Will mixing this ceramic spray with the 60ml bottle of advanced formula increase the longevity of this spray coating? Just curious
I just got mine gunna try for the 1st time ever doing a ceramic coating.
But I'm confused, this guy says wipe off after the rainbow fades, but the bottle says allow 1-2 min to dry until u see the rainbow..
So which is it??
Wipe off after the rainbow fades or when it forms?
How long should it cure after application? Any time at all?
Where can I get the applicator from? I bought this but it did not have an applicator with it.
For clarification when do I level off the applied graphene coating…when it rainbows or when the rainbow effect fades.
Ok have questions . It says not to smell it . What happens if you smell it? Also should you use glass coating on the windows instead of this product?
Hi Marc, ceramic spray coating has a very strong smell due to the solvents, similar to ammonia. Many of our products smell great, but spray coating will cause a burning feeling to your nose and eyes and could cause a headache. Once it is atomized into the air with the spray trigger, the scent is not as strong. Our Graphene Glass Coating will hold up longer and be more durable on glass, but the spray coating can be used on glass if you do not have the Graphene Glass Coating.
Have a questions, just received two bottles of Advanced Graphene Spray(BOGO deal). One of the bottles is a clear liquid, the other is a black liquid, when applied it goes on black. Emailed Adams, and they say this is normal. Why the contrast between two bottles. Should the product be black / staining? Anyone else encounter this?
This is for already ceramic coated vehicles or what? Im confused
Can I reuse the towels used on those spray coat , I got the kit recently but towels are to expensive to drop
hey!! can you use this as a top coat???
btw love the R8
I’m sure it’s a great product, but can’t be sure because I ordered it but didn’t get a spray nozzle.
Hello detailing community Happy New Year. Is this product ok to use under the sun? I'm a mobile detailer and I do not have a garage.
Can this be used on top of adams ceramic coating (small glass bottle)? I'm trying to keep/maintain the coating for as long as possible and was thinking I could top it off with a spray every 6 months or so.
Yes you can)
Can this be a topper?
Since you spray the cloth, why not just use the 5 year product? I mean, you use an applicator for both, but you have to re-do the spray-on product every year (for an outside-parked car). Is it easier to use? More forgiving? I don't get it?
from what i’ve seen, the formula is less concentrated, meaning it’s a bit cheaper and you don’t have to be AS careful when applying. In my case i’m considering using this product because I don’t have a polishing machine for the prep, and I’m kinda of scared of not applying properly since it will be my first time. I think it is not a great deal to not use a polisher in my case because my car is 6 months old, if the car you are applying this to hasn’t been polished i suggest to ensure the vehicle is polished before application.
Just got a brand new car and full car PPF. I've only driven it 500 or so miles. Would you recommend I decontaminate/clay bar, polish, surface prep and than graphene? Wouldn't the surface prep remove the work done by the polish?
Can you use this outside if you don't have a garage?
Question - should you prep the paint first? meaning, clay, polishing/buffing then apply the ceramic spray? I am new to these things and want to make sure I do this right.
Yes! 1000000% prep the paint first, then use with their prep spray, or just some rubbing alcohol to strip off the wax and polish. Once the paint is bare then you apply this product
@@orion9807 what if I don’t polish ? Will it affect it that I didn’t
@RodrigoRodriguez-ri7wn any imperfections in the paint will be sealed in......so if there is any light scratches they are staying until you polish away the ceramic, and then polish the scratch......it's best if you just polish before applying for the best results. It doesn't need to be perfect, just looking better then before.
You never mentioned the CURE time- is it at least 7 days (same as the liquid bottle coating)?!
Back of the bottle says 4 hours once wiped. I went with that.
How long does this coating last?
Great video Joe, Thanks
Is it better then cerakote paint sealant?
Did anybody have used Adams graphene Spray coating on the headliner fabric. I don't want to spend extra cash on another product for headliner fabric. Please provide me with there honest opinion.
Do you need to toss the towels after using them like you do with a standard ceramic?
Hi there, not necessarily! The spray coating residue doesn't harden and crystallize as much as can happen with the thicker 60ml coating bottles that we offer, but we do recommend soaking the towels after application in a bucket of water with an ounce or so of our Towel & Pad Revitalizer, so that the spray coating doesn't make the towel water repellent. I like to mark my coating towels with a black marker or put a small cut into one corner so that I know it has been used with a coating previously. Then I know to test it carefully on the next vehicle if that vehicle has a delicate clear coat. If you do want to toss them, consider using them for less delicate jobs like exhaust tips, engine bay, etc before throwing them out.
@@AdamsPolishes thank you so much!
OK so this may be old news but I was having a problem with your spray nozzle for the tire and rubber cleaner not squirting at all After using it a few times and I had plenty of product in the bottle so today I decided Hey what if it's clogged up so I ran it under hot water both the straw and the nozzle and it squirts now so that stuff dries in there if you don't use it for I don't know a week or more so I suggest cleaning it out after every use
Should you dispose of the towels used to remove/level the coating, or can they be effectively washed and reused?
Nope. When using ceramic or graphing get rid of em.
Can you apply this over other Ceramic coatings that have been previously applied?
@Mark Erbesfield I always use a strip wash snow foam and shampoo to remove any remnants of an old coating. If I'm trying to replenish an existing coating, I turn to things like Mirror Polishes Touchless foam-on solution, or Gyeon's Wet Coat. All you do is rinse those products off, and dry - simple way to keep your coatings durable.
@@merbesfield I don't see why not, but what would be the point in doing that? Is the previous CC not holding up or not to your liking?
How many wipe off towels do you need to do a truck? Can you use one for the whole thing? Or will it get too full and just start spreading the coating rather than removing the excess?
After polishing my car to remove micro swirls, I just used my pressure washer to remove any leftover polish from nooks and crannies and lightly washed it again with soap and water. Skip the Surface Prep. Just another $ product to use. You could also spray it with isopropyl alcohol after washing but I found that's unnecessary.
What car wash should you use before you do this? I have a wash and wax would that be fine or does it need to be a strip wash?
Does this also work on a matte/satin vinyl wrap?
I am also detailer. I am looking explore a little more on graphene I know about ceramic coatings
Would you use a carnauba wax over the top of this product
So just to make sure, I wipe away when the rainbow fades away? Or do I wait just the 2 mins in the instructions?
Depends on the climate. I used it yesterday on a clients car and after the rainbow it would harden quick. I’d then go back over it and another coat and it was forgiving.
Hopefully I receive a answer to my question.....If I've washed/clayed/compound/polish/ and waxed my vehicle can I apply your product directly on top of the work I've already done or do I need to "strip" the vehicle
No sense- it won’t last long. It can be used over advanced coating(not spray) or over clean car lack.
Does it work on wheels??
i used this! it was great. now i'm removing some emblems/badges; how do i apply ceramic coating to those spots?
very helpful. thanks!
Would surface prep ge a good lubricant for a clay bar?
Absolutely Noooo! Prepare is water+Isopropanole mix. For clay use specific lubricant or detail spray if it’s allowed (see manual of spray)
Hi, does anyone know how long after application this can be topped with something like a cos spray dressing? I’m looking at the collinite beadmaker ceramic/graphene product as a little gloss/bead enhancer….
I’m going to use this this weekend but there is a lot of pollen in my area should I wash then use a clay bar or just wash and use it thanks
I have a ZR2 with a Matte Black plastic scoop on the hood, can I apply this Ceramic to that part?
They don't care about your questions, guys. Just stop asking.
Dumb question from someone who is learning.
After buffing the car, would I apply wax and then this stuff or just apply this after buffing?
Not a dumb question at all! You do NOT apply a wax if you are going to use Graphene Ceramic Spray Coating. The coating needs to be applied to the bare paint after machine compounding and polishing it. The coating replaces your wax step.
So each time you apply spray 4-5 sprays onto applicator?
do i spray on car or applicator?
Hi Gabe, we recommend spraying into the applicator directly, 3 or 4 sprays per panel, facing away from the vehicle. The overspray can travel far, so that is why we recommend to face away from the vehicle when you spray it into the applicator. Do NOT inhale the fumes either.
I have a brand new car, with less than 200 miles. Do I need to prep the paint with anything other than a simple wash and dry? OR should I handglaze it before Adams ceramic coating? I purchased your Graphene Complete kit.
same here and after researching the web they say yes,we just don't have to use a compound a simple wash,machine polish and decontamination will do just right.
Can I apply this on top of the H20 Gloss Sealant?
Getting ready to purchase this product but curious the shelf life of the bottle? I have heard that once a ceramic coating is open it needs to be used in 4 months or has to be tossed?
Ok we get it! "GRAPHINE CERAMIC SPRAY COATING ADVANCE"
Is this stuff easier to use than ceramics?
From Thailand, I bought this product and study how to apply. Here is a land of high temp and humidity. Any suggestion for this product?
Product is solid. I have around a 100 kits imported here in Pakistan. Has been performing exceptionally well. We have all the seasons; summers, winters, autumn, high and low humid weathers. Much worse than Thailand. Runs strong.
@@moinj4846 thank you
In higher temps and humidity it will cure faster, so check it often
@@chrisinco5920 thanks
Can you use wax over graphene coating?
interesting...typically it would be one or the other. Personally I think it would make more sense and be cool to try waxing then coat, but I'm just a backyard boogie DIYer 😂. Let me know if you tried yet and how it worked out.
Did you find out about this? I'm asking same question. Carnuba always looks amazing would love to add on top for added depth.
Adam's answered this question posted by a different user. Their response: "...you could, but it is not necessarily recommended. A carnauba wax is in a different product family than ceramic coatings, and could make the coating perform less in terms of hydrophobics and water repelling behavior. Graphene Detail Spray or CS3 would be better and more compatible toppers for a ceramic coating to enhance performance and shine."
Do you recommend using a trim dedicated sealer for plastics or is this just as good?
What do you have to say about Scott HD video with your product only lasting basically 7 days? I was almost hooked into buying your product but now I have my doubts!!!!
Can you add multiple layers? Is it necessary to add more coats to get more gloss and protection?
You can, but it is not necessary. When layering ceramic coatings the law of diminishing returns applies. They add a UV tracer to make sure the application is full and even.
Ok. One question. Gyeon can coat or adams? What is better?
So you just apply this stuff once and it will last for 1-2 years then apply again?
Can you use this on car wraps also?
How much I can charge for just a spray graphene ceramic
Can you please advise how long cure time before we can drive it out in the rain? 24hours?
Hi Larry, our Graphene Ceramic Spray Coating Advanced needs a minimum of 4 hours before it can be exposed to rain or moisture, but 12-24 hours is even better if you can wait that long. The 7 and 9 year non-spray versions do require a full 24 hour cure time though at minimum before they can be exposed to rain or moisture.
My car was ceramic coated 2 years ago. Can I apply this on my car ?
can you use this on tires (rubber) like a dressing?
Just did mine today but I forgot to surface prep one area and just use the coating should I surface prep it again than reapply the coating?
What's the best temperature to apply Adams?
Hi Ryan, for the spray coating, easiest application would be at room temperature and low humidity, but we have applied out coatings in temperatures as low as 50F. 60-80F would be ideal 👍
@@AdamsPolishes tyvm
Can i use this product over an old ceramic coating? After i do strip wash and clay bar?
Yes. That would be called a coating topper.
Hi need some help. I applied this product and made a mistake. I coated a headlight which has PPF on it and forgot to wipe it off. Now the head light is foggy. It has been a couple of days. How can I restore it without taking the PPF off?
Have you tried applying some fresh product to try and disolve the 1st layer?
Can you apply to leather?
Can you use this product on the plastic windows of a soft top like the ones found on the new Bronco?
Should be fine, it can be used on plastics like UTV windshields without issue
I think I have some high spots, or just plain spots I missed on my windows. Any suggestions on fixing it?? Add another coat like you said and even it out? I thought about taking my mini rotary and taking it to my windows and then re apply the product. Open to suggestions thankyou
Hi there, did you apply our Spray Coating or the Graphene Glass Coating, and how recently was it applied? If you applied the spray coating in the last day or two, you should be able to fix the high spots by reapplying a little more spray coating onto an applicator, spreading it over the affected areas, and then immediately wiping with a bit of pressure. Make sure to flip the towel to a clean side and wipe again to avoid any smears. If it's one of our more durable coating options, or if the high spots have cured for several days, try taking a drop or two of our Brilliant Glaze or white Polish onto a towel or applicator, wiping into the area in left-right and up-down motions, then wipe away the residue with a clean microfiber towel. These will usually remove the high spots without compromising the actual coating layer. Using your mini rotary should be the last option, since it will remove the coating in that area and you would have to reapply. Let us know if you have any other questions!
Need to grab this 🔥
Do you have to wait for the whole area to flash before wiping it off? It do you wipe off when you see most of it flash?
I'd imagine you'd want an even flash otherwise you'd wipe off non-flashed areas prematurely
I am in AZ and the temps are fairly high. I applied the coating early morning but did not see any rainbow effect. Is that normal? Did I do something wrong?
Can this be applied over already ceramic coated cars?
I wanna know also.
Kourtney spotting at 5:33
I forgot the prep wipe .what a mess to wipe. Streaking etc, what can i do now to fix it?
Hi Andre, check out this video here for lots of troubleshooting techniques on graphene coatings: ruclips.net/video/a4CJqRGtbnw/видео.html
Could this be a topper for the Adams Graphene Ceramic Coating Advanced? Or I need to pick only one and don’t apply the other?
I wouldn't. For upkeep between coatings, I use thier graphene detial spray.
do you still throw out the towel after using it?
I've been using similiar products like solvent ceramic & graphene spray coating in couple years. The fun about this product they tend to more forgiving to your microfiber than traditional ceramic coating, so you don't have to trash your microfiber. But it does reduce a bit with the towels absorbance capability.
So my recomendation, you can use the same microfiber for other than your paint such as engine or wheels, tire, or undercarriage cleaning.
If applied on black rubber or plastic trim, does it darken then protect it?
Or would I apply something like solution finish, let it dry, then apply the spray?
Hi there, it will darken plastics to a degree, yes; however if the color pigment is heavily faded, you can use our Black Trim Restorer first to dye the plastics, allow it to dry, and then apply the spray coating afterward to lock in the dye for a longer time period.