LINKS TO ANYTHING I HAVE USED ON MY POND THAT I WOULD RECOMMEND ⭐⭐⭐⭐⭐ *I get a small % when you buy anything, helps justify time recording to the wife, so thank you in advance 🙏 MY POND SET UP 🐠💧 Nexus 220 🔗 amzn.to/3wxdv0h Evo Aqua Pond Pump 🔗 amzn.to/3clZyv8 Pond Water Blade 🔗 https//amzn.to/3KqEDVq Tempest Pond Water Polisher 🔗 amzn.to/3QRrTsd UV Pond UV Light 55w 🔗 amzn.to/3e0LB6r Air Pump 🔗 amzn.to/3CDn8yr Pond Declinator 🔗 amzn.to/3wyWgLV Replacement EA UV55w Bulb 🔗 amzn.to/3AZdAN3 GOOD STUFF I HAVE USED ⭐😁 EA Pure Pond Balls 🔗 amzn.to/3PSpuwh EA Pure Pond Bomb 🔗 amzn.to/3ApoQka Koi Pond Salt 🔗 amzn.to/3QSc98v Air Pump Stones 🔗 amzn.to/3APCFKb NT Labs Magiclear 🔗 amzn.to/3Klv8pA NT Labs Pond Test Kit 🔗 amzn.to/3ThN9sW ⚠ Potassium Permanganate Kusuri 250g 🔗 amzn.to/3KqpYJI Hydrogen Peroxide 6% Solution Kusuri 🔗 amzn.to/4c1GVGc Kusuri Topical Treatment Kit 🔗 amzn.to/4aIbGib EQUIPMENTN USED 💪🙏 Silirub Aquarium Safe Sealant Link 🔗 amzn.to/3vOa34d Pipe Cutters 🔗 amzn.to/3pTcDPD Grifton WDF-05 PVC Pipe Glue 🔗 amzn.to/3wxgc1R PVC Pipe Saw 🔗 amzn.to/3QRyenK Pond Net covers 🔗 amzn.to/3PQz2rx Stanley Knife 🔗 amzn.to/3TY4mJ5 Johnny Builder Gloves 🔗 amzn.to/3UeBOMQ My Koi Dealer UK Nishikigoi 🐠 Sells everything you need so if your local go there see Dave for everything 👉 facebook.com/UkNishikigoiBellLane
Interesting mate will give that a gander. I hope I can sort the leak too but I’m guessing as nobody’s said anything yet it’s going to be a tricky one 🤔
I had one of the same issues for my pond. To find out the leak shut down your skimmer for few days and see if the level is lowering. Waters going into the filter from the bottom drain so you’ll know if leaks inside or around the pond. My leak was on the water fall I had made but I was going bonkers before that to find out where the actual leak was lol. All the best.
Lower the pond level below the return dry it out and pump it round with MS300 also paint around the return with MS300 liquid liner. Just my opinion not sure its going to work but surely worth a try, MS300 marvellous stuff.
Have you had camera in your pond to see if there are any cracks on the walls. I have a bresser microscope and I plug it into my laptop and use the app and can see on my big screen good for my old eyes
You need to get some clips on that pipe work Johnny It could be leaking where they fiberglassed over the flange on your inlet and might need to smear some ct1 or something like it to make the seal again as fiberglass doesn’t stick brilliantly to plastic Hope you get it sorted
Our survey says .......... TOP ANSWER🙏 Thanks Steve it was exactly that pal fiberglass on PVC end. I drooppped and resealed using Silirub (it had my name all over it) cheers mate
@@koifishjohnny you need to get some clips on them pipes aswell Johnny over time pipe work starts to get more brittle fixing it back will help support it
No good big man. My guess is the fibreglass has lost its bond on the inside of the pipe, where it meets the naked pipe. Maybe drop water below pipe. Finger the pipe lol. You might feel where the bond has been lost. If so... Pretty easy fix. Either some CT1 or OB1. Smother it. Leave to dry for a few hours. Refill. If it's a cracked pipe further in where you can't reach it. Then that a bit more awkward bit there is a way. Good luck either way. ❤
Where the pipes come out of the brick always cement them in bud. Like you say. When you wiggle the pipe or just turning that tap can crack the fibreglass.
You got in bang on mate, but I dropped the water. Will defo look into the "gold label" if anything happens again mate. Thank you pal top supportive comment
Feel for u mate im facing a similar issue with mine. Emptied it by 3/4 n using gold label pond paint check it out to reseal my fibreglass. Filling back up after one week on sunday fingers crossed. Plz sub if not already.
Johnny's Hawaiian Shirts 🤩🏝👉 www.koiaura.com
Johnny's Wishlist 🧞 www.amazon.co.uk/hz/wishlist/ls/2XCFVHWZFRQZ6?ref_=wl_share Johnny's Johnny's Amazon Product Review Page ⭐⭐⭐⭐⭐
🇬🇧 www.amazon.co.uk/shop/koifishjohnny?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfkoifishjohnny_P09BE5KA9HQGVA5DXJNX
🇺🇸 www.amazon.com/shop/koifishjohnny?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfkoifishjohnny_CHDK1X6GAA1RCFH6TT08
LINKS TO ANYTHING I HAVE USED ON MY POND THAT I WOULD RECOMMEND ⭐⭐⭐⭐⭐
*I get a small % when you buy anything, helps justify time recording to the wife, so thank you in advance 🙏
MY POND SET UP 🐠💧
Nexus 220 🔗 amzn.to/3wxdv0h
Evo Aqua Pond Pump 🔗 amzn.to/3clZyv8
Pond Water Blade 🔗 https//amzn.to/3KqEDVq
Tempest Pond Water Polisher 🔗 amzn.to/3QRrTsd
UV Pond UV Light 55w 🔗 amzn.to/3e0LB6r
Air Pump 🔗 amzn.to/3CDn8yr
Pond Declinator 🔗 amzn.to/3wyWgLV
Replacement EA UV55w Bulb 🔗 amzn.to/3AZdAN3
GOOD STUFF I HAVE USED ⭐😁
EA Pure Pond Balls 🔗 amzn.to/3PSpuwh
EA Pure Pond Bomb 🔗 amzn.to/3ApoQka
Koi Pond Salt 🔗 amzn.to/3QSc98v
Air Pump Stones 🔗 amzn.to/3APCFKb
NT Labs Magiclear 🔗 amzn.to/3Klv8pA
NT Labs Pond Test Kit 🔗 amzn.to/3ThN9sW
⚠ Potassium Permanganate Kusuri 250g 🔗 amzn.to/3KqpYJI
Hydrogen Peroxide 6% Solution Kusuri 🔗 amzn.to/4c1GVGc
Kusuri Topical Treatment Kit 🔗 amzn.to/4aIbGib
EQUIPMENTN USED 💪🙏
Silirub Aquarium Safe Sealant Link 🔗 amzn.to/3vOa34d
Pipe Cutters 🔗 amzn.to/3pTcDPD
Grifton WDF-05 PVC Pipe Glue 🔗 amzn.to/3wxgc1R
PVC Pipe Saw 🔗 amzn.to/3QRyenK
Pond Net covers 🔗 amzn.to/3PQz2rx
Stanley Knife 🔗 amzn.to/3TY4mJ5
Johnny Builder Gloves 🔗 amzn.to/3UeBOMQ
My Koi Dealer UK Nishikigoi 🐠 Sells everything you need so if your local go there see Dave for everything 👉 facebook.com/UkNishikigoiBellLane
Hope you find the leak soon Johnny and that it’s not too awkward a repair…. 🤞🏼👍🏼
Got it Andy mate, cheers and thanks for watching
@@koifishjohnny 👏🏼 👏🏼 well done, glad to hear it 🥳 👍🏼
hope you get the leak sorted. I bought the Bresser scope for the LED screen. It is a lot easier to use than the normal microscopes ( imho )
Interesting mate will give that a gander. I hope I can sort the leak too but I’m guessing as nobody’s said anything yet it’s going to be a tricky one 🤔
I also use this scope and can confirm it’s brilliant
I had one of the same issues for my pond. To find out the leak shut down your skimmer for few days and see if the level is lowering. Waters going into the filter from the bottom drain so you’ll know if leaks inside or around the pond. My leak was on the water fall I had made but I was going bonkers before that to find out where the actual leak was lol. All the best.
Glad to hear you found yours mate, I found mine on PVC return and PVC pipe all reaseled and filling up now. Cheers mate
Lower the pond level below the return dry it out and pump it round with MS300 also paint around the return with MS300 liquid liner. Just my opinion not sure its going to work but surely worth a try, MS300 marvellous stuff.
Good comment mate, I dropped and resealed with Silirub it had my name all over it haha. Cheers for support mate
Have you had camera in your pond to see if there are any cracks on the walls. I have a bresser microscope and I plug it into my laptop and use the app and can see on my big screen good for my old eyes
Good call Carol, all sorted now was pvc pipe. A lot have the breaker microscope thanks 🙏 take care ❤️
You need to get some clips on that pipe work Johnny
It could be leaking where they fiberglassed over the flange on your inlet and might need to smear some ct1 or something like it to make the seal again as fiberglass doesn’t stick brilliantly to plastic
Hope you get it sorted
Our survey says .......... TOP ANSWER🙏
Thanks Steve it was exactly that pal fiberglass on PVC end. I drooppped and resealed using Silirub (it had my name all over it) cheers mate
@@koifishjohnny you need to get some clips on them pipes aswell Johnny over time pipe work starts to get more brittle fixing it back will help support it
@@steveg4315 hey Steve cheers, I don’t know what you mean with clips mate? Sorry if I sound like an idiot it’s because I am one 😂
Fibreglass on pipe fitting drop pond dry fitting , ms300 with finger leave to dry refill
Our survey says .......... TOP ANSWER🙏
Thanks mate
No good big man. My guess is the fibreglass has lost its bond on the inside of the pipe, where it meets the naked pipe. Maybe drop water below pipe. Finger the pipe lol. You might feel where the bond has been lost. If so... Pretty easy fix. Either some CT1 or OB1. Smother it. Leave to dry for a few hours. Refill. If it's a cracked pipe further in where you can't reach it. Then that a bit more awkward bit there is a way. Good luck either way. ❤
Our survey says .......... TOP ANSWER🙏
Thanks mate such an amazing message of support Danny
Ms300 mate on the inside and around the pipes 👍
Bang on mate but used Silirub or something that sounds like that 😂
Where the pipes come out of the brick always cement them in bud. Like you say. When you wiggle the pipe or just turning that tap can crack the fibreglass.
Bobby as usual:
Our survey says .......... TOP ANSWER🙏
Thanks mate
@@koifishjohnny hope you get it sorted soon bud 🤞
@@bobbyknox9258 refilling as we speak. Started at 8 am and now about 2 inch above bottom of window ⏳
@@koifishjohnny sweet 👌
Gold label around the inside flange, this way you dont have to drop the water as it sets under water, if it is this that is.
You got in bang on mate, but I dropped the water. Will defo look into the "gold label" if anything happens again mate. Thank you pal top supportive comment
@@koifishjohnny Gold label is a pond sealant that sets under water, hence the no need for dropping the water.
@@stevealexander6928 ahaha I see cheers pal
Hi Mate. You can get a camera for your scope, but it don't work with a Mac.
Mannnnn I hope you’re wrong dude, I only 2 macs no laptops 🤞awesome point though mate thanks 🙏
Water looks Mint Mate.
Its a apex minigrab ur looking for
Belting mate just had a gander. Going drop them a message as I don’t know if it’s Mac friendly. Thanks mate
Feel for u mate im facing a similar issue with mine. Emptied it by 3/4 n using gold label pond paint check it out to reseal my fibreglass. Filling back up after one week on sunday fingers crossed. Plz sub if not already.
Mines filling to mate and I dropped it and resealed