Great videos. I have wanted to have a go at repairing an old machine, and this the kind of help that is perfect. Once I find a donor machine for a bargain that is. Thanks
Thanks for the video. I'm thinking of installing an Asco Sirai pressurestat im Oscar 2. So, basically you cut the original wires, put new cable lugs with a grimping tool and then plug the lugs in the Sirai pressurestat?
really easy to follow , info and method really helped me with a totally different problem , will look thru your other vids too , my current prob is old Astoria Argenta single not heating ...
Only because of your video did I think to check if my pstat line was full of water when it wasn't turning off heating element and machine would shut off so to temp safety switch. $0 fix. Guess I have to purge it every few years. Thanks!
Thank you for your video. Do you know what the boiler is made out of? I can't tell if its coper that has been plated or if its something like aluminum or stainless steel.
Remember not all the time the pressure safety valve has to be replaced after it discharges, sometimes it is its normal operation especially when the pressure it's beyond 2 bars. Sometimes try just to adjust the pressure switch or replace it
It should have minimal effect on the brew pressure because the pressurestat only allows a narrow range of pressure variation (0.5 to 1.2 bars) in the boiler.
oh by the way i got the cables off but now i cant twist off the pressure stat it seems like its seized or something? ive applied so much force that i actually broke the old pressure stat. how do i remove it is it supposed to easily twist off? i've tried evreything...@@coastcafeequipment
I just blew our rocket coffee machine this morning by spilling water on the top of the machine 😞 it was great to see your Vlog , thanks for posting
Nice videos. Thanks for sharing. You answered like 30 questions I had. Just got a Oscar one and thinking of moding the heck out of it.
Great videos. I have wanted to have a go at repairing an old machine, and this the kind of help that is perfect. Once I find a donor machine for a bargain that is. Thanks
Thanks for the video. I'm thinking of installing an Asco Sirai pressurestat im Oscar 2. So, basically you cut the original wires, put new cable lugs with a grimping tool and then plug the lugs in the Sirai pressurestat?
really easy to follow , info and method really helped me with a totally different problem , will look thru your other vids too , my current prob is old Astoria Argenta single not heating ...
Check over temp, element , pressure state
Only because of your video did I think to check if my pstat line was full of water when it wasn't turning off heating element and machine would shut off so to temp safety switch. $0 fix. Guess I have to purge it every few years. Thanks!
Shouldn't have to, as long as the water level is set correctly and you clean the water level sensor every 6-12 month
How often does that pressure valve go bad and need replaced?
Thank you for your video. Do you know what the boiler is made out of? I can't tell if its coper that has been plated or if its something like aluminum or stainless steel.
It is made of copper. After a few years, the color of copper turns greyish or greenish but it is copper.
Nice video❤.Can you make a video about how to replace the pressure valve of the crm3005e ? Thanks.
Remember not all the time the pressure safety valve has to be replaced after it discharges, sometimes it is its normal operation especially when the pressure it's beyond 2 bars. Sometimes try just to adjust the pressure switch or replace it
Correct. But not in this case
Tradução em português
Hello
how can we change headlight bulb for rocket appartamento?
thank you
Hi, is 0.9 bar enough for an heat exchanger machine ? I’ve seen more often 1.2. Thanks.
Sure but maybe not so great for steaming
Could this also be responsible for low pressure at the brew head?
It should have minimal effect on the brew pressure because the pressurestat only allows a narrow range of pressure variation (0.5 to 1.2 bars) in the boiler.
I guess this machine need full descaling first
The level probe stick will not tighten even after I screw the bolt, why is it? Yours seem to stabilize at any height that you like
Perhaps the plastic sleeve has fallen down
How do you remove those cables and wires attached to the pressure stat I just can’t get them off and I’m pulling very hard
Use a flat head screwdriver to lever it out
oh by the way i got the cables off but now i cant twist off the pressure stat it seems like its seized or something? ive applied so much force that i actually broke the old pressure stat. how do i remove it is it supposed to easily twist off? i've tried evreything...@@coastcafeequipment
Ehm, yes it's the valve. Because half of it are missing.
Think you’ve got it the wrong way around. It’s your anti vacuum valve that’s leaking. The one with the pin is the safety valve.