Update: tvpartstoday reps said they will refund my $50 but after calling few times they haven't yet, sadly. I don't recommend them. Use Shopjimmy.com or electropartsonline.com instead. Finally after weeks I got a refund.
I need your help im stuck my tv menu has turned upside down samsung 4k crystal colour model UE40MU6400UXXU please share service menu panel list is not correct i dont know panel type number in list tuner is a error due to this...
Hey buddy I'm sure u are busy or probably just don't answer these . But I'm trying to fix my Sony kdl55ex720 can't seem 2 get front off on bottom seems to have tape clips . Wondering if u could help me. It is blinking 4times so trying 2 open and see if it's the leds . Or maybe help check . I lived in st Pete Florida just over the bridge from u. Moved now but great place
Awesome! Thanks for tip on how to enter the service menu. I have a Samsung 40" Smart TV model UN40EH5300 that has a brightness issue. I've tried all the settings ie brightness, contrast, and backlight settings as well as dynamic contrast, made sure eco-mode is off, and I've checked the firmware. Connected to internet, tv said it's up to date. I've also tried the coax and one HDMI inputs and still have the issue. So, I'm assuming it's a board? Do you know if the t-con board controls the brightness of the picture? Thanks for any help!
Tampatec maybe there is an HDMI issue \ shorts and then the tv enter to protection mode? although when you were on cable it still was restarting, I suggest you to try with AV ( composite) or vga to see if it stays on
Hi,tampatec. I have a Samsung tv that also turns on and off,but if I disconnect the LEDs plug stays on but with no back light,if I plug them back on keeps turning on and off. what do you think is the problem? Thanks in advance.
good day so i got this 24 " mastertech led tv which I use as my laptop screen with HDMI but the display cuts ofc after a minute (sounds no display) but after leaving it playing a couple mins pit stays on after powering off and on
I have a Samsung un46eh5300 that shuts off automatically and turns back on automatically. I have not changed out anything yet so it isn't going to be the wrong logic board I would like to know why this is going on and how to fix it I also have an lg 50" 4k tv that after 21months will not turn on. I have replaced the logic board and the power board and it still will not turn on. The tv looks like it will start and then just shuts down and won't even go into standby mode I have tried the common repairs for both these tv's they still are not working
ARTIFACT!??? mine was at least that old and a new Tcon board fixed 'er right up. if it ain't broke, jdon't fix it... if it's broke, try and fix it. if it's still broke, take it apart and use the bits...
...I noticed the channel indicator box stayed on longer the second time you entered the code.......... ......I would've loved to see what would happened if you input the code a THIRD time..... ......Maybe something needs to get warmed up........
Be nice dude if you're not learning from him move on. He's sharing the good and bad with us. I'd rather him show us his fails and mistakes rather than all his victories. No one learns from winning all the time. Maybe you do, but then that would make you special wouldn't it? :-)
Hey tampatec i have a 55inch curved Samsung the type # is un55nu7300 n it has like a strip down the right side that is black but the rest of the screen shows pictures n video n menu all fine ...was wondering how i can fix it myself cant hardly find anything on this kind of crack ...the outside glass on screen is fine ....n im thinking it got pressure on it when moving or something electrical....
Update: tvpartstoday reps said they will refund my $50 but after calling few times they haven't yet, sadly. I don't recommend them. Use Shopjimmy.com or electropartsonline.com instead. Finally after weeks I got a refund.
I need your help im stuck my tv menu has turned upside down samsung 4k crystal colour model UE40MU6400UXXU please share service menu panel list is not correct i dont know panel type number in list tuner is a error due to this...
You cracked the code! 10 years strong, hope it lives to see another 10. As usual, I learned a lot from listening to you. Thanks for these videos.
Good afternoon
I have a Samsung QLed and it’s cycling off and on it’s only 3 years old do you have some troubleshooting tips ?
Thank you, i reset my Samsung TV, from one of your older videos. I am very greatful, thanks again.
Helpful and very good video 👍
I like your tanasity I tell my other pickers about you. Thank you.
You are correct. The main board is defective. And. It’s just. Mute. 182. Power.
How can I tell which Samsung TVs have this service menu? To be clear, I need a 27 inch tv that supports the HFlip option in the “mute+182” menu.
I had one and mine turned out to be cold solder joints on the main board. Worked fine after a reflow.
I watched completely and learned new things
thank you such a great tutorial L@17
Hey buddy I'm sure u are busy or probably just don't answer these . But I'm trying to fix my Sony kdl55ex720 can't seem 2 get front off on bottom seems to have tape clips . Wondering if u could help me. It is blinking 4times so trying 2 open and see if it's the leds . Or maybe help check . I lived in st Pete Florida just over the bridge from u. Moved now but great place
Did u get your Refund?
Hi! Is it possible to enter service mode with „smart remote” or i need regular remote only?
Awesome! Thanks for tip on how to enter the service menu. I have a Samsung 40" Smart TV model UN40EH5300 that has a brightness issue. I've tried all the settings ie brightness, contrast, and backlight settings as well as dynamic contrast, made sure eco-mode is off, and I've checked the firmware. Connected to internet, tv said it's up to date. I've also tried the coax and one HDMI inputs and still have the issue. So, I'm assuming it's a board? Do you know if the t-con board controls the brightness of the picture? Thanks for any help!
And now we are at part 5.....alright..... Five times the charm, right😁
Can’t wait.....just know it’s gonna end up working!
Big thanks! Very informative ☜☆☞
Tampatec maybe there is an HDMI issue \ shorts and then the tv enter to protection mode? although when you were on cable it still was restarting,
I suggest you to try with AV ( composite) or vga to see if it stays on
Who are the 85 people who didn't like this video?
thanks for sharing your video...
this is more entertaining that what will end up getting played on that tv! :D
Hi,tampatec.
I have a Samsung tv that also turns on and off,but if I disconnect the LEDs plug stays on but with no back light,if I plug them back on keeps turning on and off. what do you think is the problem?
Thanks in advance.
Sounds like "some" of the capacitors are bad.
good day so i got this 24 " mastertech led tv which I use as my laptop screen with HDMI
but the display cuts ofc after a minute (sounds no display) but after leaving it playing a couple mins pit stays on after powering off and on
You can dooo it💥
On service menu how do we know what the TV type is as there are many different ones at the same size .
I'm watching this video on the exact same model TV you're fixing. Hope mine doesn't get any funny ideas
Joseph D Imagine If yours turned off after his tv turned off. 😬
How to turn off Auto Dimming ( flicker) in Service Menu Samsung UE32H5000AW. Thank you.
Im stuck my tv in menu says Model UE70 is not is a UE40 still works
I have a Samsung un46eh5300 that shuts off automatically and turns back on automatically. I have not changed out anything yet so it isn't going to be the wrong logic board I would like to know why this is going on and how to fix it
I also have an lg 50" 4k tv that after 21months will not turn on. I have replaced the logic board and the power board and it still will not turn on. The tv looks like it will start and then just shuts down and won't even go into standby mode
I have tried the common repairs for both these tv's they still are not working
My tv has colour problem sometimes its green red pink blue what should i do??
Defekt this its Operation Flash Chip " BotLoop"
Any way to get into the service menu without restarting or repowering the tv?
ARTIFACT!??? mine was at least that old and a new Tcon board fixed 'er right up. if it ain't broke, jdon't fix it... if it's broke, try and fix it. if it's still broke, take it apart and use the bits...
I did many changes in my service menu and I need reset It, but "factory reset" does not solve. Is there another way to reset my changes?
did you manage to solve this?
What model number is it. If it’s an 7000. Or 8000 series. Your not gonna believe the picture quality
What about Sony Smart TV Service code?
❤️👍
please , my samsung tv model UH40A5500ARXEG when i open it start blinkin and not open at all what is that
Just return the board cause it's not the right one ok
Where is setting in smart tv
I live in riverview, how much would you charge to come mount my tv?? 😭
I can't find the network of our samsung tv how?
...I noticed the channel indicator box stayed on longer the second time you entered the code..........
......I would've loved to see what would happened if you input the code a THIRD time.....
......Maybe something needs to get warmed up........
the wifi card
My tv is not reset it show not avaliable
Sir I'm Bangladeshi plz, help me sir
It did not work
So Handsome
Seems like nothing u do works? Ok.....🤙🏼
Be nice dude if you're not learning from him move on. He's sharing the good and bad with us. I'd rather him show us his fails and mistakes rather than all his victories. No one learns from winning all the time. Maybe you do, but then that would make you special wouldn't it? :-)
Hey tampatec i have a 55inch curved Samsung the type # is un55nu7300 n it has like a strip down the right side that is black but the rest of the screen shows pictures n video n menu all fine ...was wondering how i can fix it myself cant hardly find anything on this kind of crack ...the outside glass on screen is fine ....n im thinking it got pressure on it when moving or something electrical....